Output print options for alv which has more than 30 cloumns

hi,
if an alv output(oops or normal ) has 30 coloumns in the output,
if i give print option in the spool i check it will have only 13 coloumns generated other coloumns are not at displayed. how to get all the coloumns print in the spool if alv has more than 30 coloumns.
regards,
narsimha.

Hi Narsimha,
Its the limit in background that u can print only 255 characters.
Regards
Lalit

Similar Messages

  • How to find tables which has more than 1000 Partitions

    Hi All,
    Is there any other way to find out the tables which has more than 1000 Partitions ?
    Apart from SAP report RSDD_MSSQL_CUBEANALYZE. Because this report is not working for me as job getting cancel again and again with ABAP dump DBIF_DSQL2_SQL.I already check SAP Note 1309838, but itu2019s not applicable for us because we are on highest support package level SAP_BW 701 SP06.
    Thanks,
    Harshal

    If you are running SQL Server as your database platform run this query:
    select o.object_id,o.name,p.Partition_count from sys.objects o
    inner join
    (select object_id,count(distinct partition_number) as Partition_count
    from sys.partitions
    group by object_id)
    p
    on o.object_id = p.object_id
    where o.type = 'U'
    order by p.Partition_count desc

  • How to upload a file which has more than 999 line item  through BDC ?

    Hello Techards
    Hi to all
    Can any body tell me how to upload a file which has more than 999 line item  through BDC for traction F-02 ?
    Thanks in advance.
    Shovan

    Hello Shovan,
    You split it up to post two accounting documents with the help of a "suspense" a/c.
    Say, you have to post the following line items below:
    line 1 - dr. - GL a/c X - $1000
    line 2 - cr. - GL a/c Y - $1
    line 3 - cr. - GL a/c Y - $1
    line 1001 - cr. - GL a/c Y - $1
    You cannot post the above as a single doc in SAP (because of technical reasons), so you need to break it up into 2 documents as below:
    Doc1
    line 1 - dr - GL a/c X - $1000
    line 2 - cr - GL a/c Y - $1
    line 3 - cr - GL a/c Y - $1
    line 998 - cr - GL a/c Y - $1
    line 999 - cr - SUSPENSE a/c - $3
    Doc2
    line 1 - dr - SUSPENSE a/c - $3
    line 2 - cr - GL a/c Y - $3
    Note that there is no incorrect impact on accounting as first we credit suspense a/c by $3 and next we debit the same suspense a/c by $3 as a result the effect is nil. Similarly, we credit $997 to GL a/c Y (which is less by $3) in the first doc which is compensated by the second doc by crediting the shortfall of $3.
    Hope this helps,
    Cheers,
    Sougata.

  • I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

    I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

    I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

  • Search UIBB which has more than one analytical queries specified

    Hi,
    Has anyone used Search UIBB and specified more than one analytical queries? I have one search UIBB as a Master UIBB of Tabbed UIBB and two tabs. In each tab there is one Analytical List UIBB which has its own query. Both queries have input variables. Do you know if these variables should have the same names in order for the search UIBB to work?
    Best regards,
    Desislava

    Hi,
    I think I got the same problem! I tried to combine all the tables in a new view and create a query on this view.
    But when I search and my result has to be one record from the main table, I get this record more than once.
    I tried to use distinct but that does not work because each column has a different value, so the record is never the same.
    I hope someone can help us!

  • Apply validators on TextInput which has more than one states

    Can I apply validator on TextInput component that has
    multiple states? For example, the base state of the TextInput is
    for email and another state is for social security
    number.

    Hi Maxium
    the error that u have goti ndicates that u have set the margins more than the permisable range plzl lowe  rit down as per the question of printing document on more than one page is carried out it is automatic because the data to be printed bust be carried out from the form with the help of database structure free text formula or varibale that are the features of pld however if the data goes beyond one page it would automaticaly print in next page u dont need to put pring page layout as 10
    Hope that would suffice your need.
    Regards,
    Manish Malik

  • Mapping for field which appear more than once.

    Hi experts.
    My source and target structure is:
    Field1
    Field2
    Field3
    ___Child1
    ___Child2
    ___Child3
    Field4
    Field3 may appear a few times in the source message.
    For example:
    Field1
    Field2
    Field3
    ___Child1
    ___Child2
    ___Child3
    Field3[1]
    ___Child1
    ___Child2
    ___Child3
    Field3[2]
    ___Child1
    ___Child2
    ___Child3
    Field4
    I need to pass to the target structure the "Field3" who's "Child1" is greater than 5 and  "Child2" is greater than 10 and  "Child3" is greater than 15.
    My problem is that the condition is executed only once for the first "Field3",
    and if the check returns
    "True" all the "Field3" are copied.
    if "False" is returns no one of the "Field3" is passed.
    How should i hold the context for it, in order each of the "Field3" elements passes the condition?
    Regards Max.

    hi,
    map required Field3& Child1 field with the target with the required conditions and set the context of both to  the higher level.
    Regards,
    NJ

  • How to modeling BOM for operation which appears more than 1 time in a route

    Dears,
    We have a route like below, operation OP01 appears 2 times in different sequence.
    OP01->OP02->OP01-.OP04
    (seq1->seq2->seq3->seq4)
    How can I modeling its BOM to let user assembly like below
    OP01(seq1): use component01
    OP01(seq3): use component03
    Since BOM maintenance can not set to assembly a component in operation at a assigned sequence of a router, so in the OP01(seq1), it will display component01 and component03 to let user assembly.
    How can we handle this problem?
    Thank you.

    Ivan,
    I looks like you are modeling two different operations as one operation. When process steps differ in the component you are assembling, it is almost always a gut idea to model then as separated operations (assemby component1 and assembly component3).
    ME allows you to use the same operation several times in a route but they should really mean the same.
    Best Regards,
    Miguel

  • Best method/design for querying the objects it has more than 300 fields

    Hi guys,
    I have a database table which has more than 300 columns, 20 million rows and it has more than 60 GB as size. They want to search by any columns. I should bring those data into the memory grid for fast access.
    Which serializer, partitioning etc. method suits to this problem ?
    How many JVM should I start with which size ? For example, I can start 8 GB heap per 4 jvm in 2 nodes across the cluster.
    etc.
    I can use Coherence 3.7 or 12.
    Thanks for design tricks.

    Hi guys,
    I have a database table which has more than 300 columns, 20 million rows and it has more than 60 GB as size. They want to search by any columns. I should bring those data into the memory grid for fast access.
    Which serializer, partitioning etc. method suits to this problem ?
    How many JVM should I start with which size ? For example, I can start 8 GB heap per 4 jvm in 2 nodes across the cluster.
    etc.
    I can use Coherence 3.7 or 12.
    Thanks for design tricks.

  • Query to retrieve the records which have more than one assignment_id

    Hello,
    I am trying to write a query to retrieve all the records from the table per_all_assignments_f which has more than one different assignment_id for each person_id. Below is the query i have written but this retrieves the records even if a person_id has duplicate assignment_id's but i need records which have more than one assignement_id with no duplicates for each person_id
    select assignment_id ,person_id, assignment_id
    From per_all_assignments_f
    having count(assignment_id) >1
    group by person_id, assignment_id
    Thank You.
    PK

    Maybe something like this?
    select *
    From   per_all_assignments_f f1
    where  exists (select 1
                   from   per_all_assignments_f f2
                   where  f2.person_id = f1.person_id
                   and    f2.assignment_id != f1.assignment_id
                  );Edited by: SomeoneElse on May 7, 2010 2:23 PM
    (you can add a DISTINCT to the outer query if you need to)

  • Photos ap on mac will not email. shows "more" for extensions which has Outlook checked but does me no good

    Why will new Photos ap on mac not email? No "email" pulldown  -shows "more" for extensions which has Outlook checked but does me no good.

    I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
    When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
    It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
    More to follow tomorrow.
    Anyone have any ideas?

  • How to print a graph in which internal table has more than 32 entries?

    hiii experts
    i am trying to make a line graph using 'gfw_pres_show' function module.
    but in report internal table has more than 32 entries
    so how can i print a graph having more than 32 entries?

    Hi ricky_lv,
    According to your description, there is main report and subreport in it, when the subreport spans across multiple pages, you want to show column headers on each page. If that is the case, we can set column headers visible while scrolling in main report.
    For detail information, please refer to the following steps:
    In design mode, click the small drop down arrow next to Column Groups and select Advanced Mode.
    Go to your Row Groups pane, click on the first static member.
    In properties grid, set FixData to True.
    Set RepeatOnNextPage to True.
    Here is a relevant thread you can reference:
    https://social.technet.microsoft.com/Forums/en-US/e1f67cec-8fa3-4c5d-86ba-28b57fc4a211/keep-header-rows-visible-while-scrolling?forum=sqlreportingservi
    The following screenshots are for your reference:
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    If you have any feedback on our support, please click
    here.
    Wendy Fu
    TechNet Community Support

  • How to set print option for a Billing document using T-code VF02

    Hi All,
    Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
    regards
    Anand.

    Enter the billing documents detail
    Goto Goto> Header>Output.
    Check the status for your output type in this screen.
    If it is green then come back to the VF03 screen.Enter the billing document number.
    Click on Billing document-->Issue output to.
    Press (CtrlShiftF1) or click on the icon beside "Print options".
    Here you can see the print preview.
    If the status is red then click on the processing log.Here you will get the error messages.
    If the status is in yellow colour,then click on the "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
    Enter the billing document no
    Go to Menu option -> Go to -> Header -> Output
    In that screen you have to add relevant output type. (Standard output type is RD00)
    Add that & press enter key
    Highlight that line & press "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Press "Back" Button
    again select that line & go to "Communication method" button
    Set "Logical destination" as LOCAL"
    Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
    Press "Back" Button
    Save
    Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
    You can see that output type line appear.
    select that line & press "Print Preview" button or (CTRLSHIFTF1)
    You can see the print preview.
    Alternatively you can use VF31 to print multiple print outs at same time.
    If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
    Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
    Then normal way, print the billing from SAP.
    It'll automatically send to your PDF writer. You can save it to the path you want,

  • Can't get duplex print option for pdf files using  Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP8600

    I get two-sided option for normal printing, but
    I can't get duplex print option for pdf files using  Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP Officejet Pro 8600.  HP says it's an Adobe problem. I'm stuck.
    Thanks in advance.
    VO

    It depends where the pdf is located. If in the Finder or in an attachment to
    an email in Entourage, the message is ³You can¹t open the application
    ³Acrobat Reader 5.0² because PowerPC applications are no longer supported².
    If an attachment in an email that has come via Safari, the message is
    ³Safari can¹t open the file because no available applications can open it².
    In each case the menu bar is Finder or Entourage or Safari as the case may
    be.

  • HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI???

    Question
    HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI??

    Thank you for the response. I tried to fix the problem with some of the suggestions on that page, but none seem to work. I believe that is the only website that I'm having that problem on. I got to fooling with it a bit more and when I highlight the whole page and select to print the selected area, it actually prints the whole page then, but it won't do it as a default. I guess I can just do it like that from now on, but I thought there would be something in the settings that I could have changed. Thanks again for the help.

Maybe you are looking for