Output Problem: Generating

I've been redesigning a robohelp project, it now incorporates
DHTML drop downs and snippets, etc. Up until now it has been going
fairly smoothly but now when I generate my flashhelp it freezes and
I have not been able to get the updates complete. It's getting
stuck fairly early in the process when it says "Updating files for
FlashHelp". Does anyone have any ideas about how I can get the
process working again?

Hi again udimer
Please don't post the same question in different forum
categories. This may make it difficult for others down the road. It
is also spelled out as something one should not do in the Forum
Posting Guidelines.
For anyone else, please direct any replies to this post to
where it first appeared. You may do this by
clicking
here.
Forum Posting Guidelines may be read by
clicking
here
Cheers... Rick

Similar Messages

Delimited output problem at the time of writing in to text file

Hi ,
I am using matrix stayle design for my reports when i am generating reports in delimited format i am getting Delimited output problem(DR.Watson ERROR) at the time of writing in to textfile.

Hi,
Try with new desformat delimiteddata which is available with Report 6i patch 11.
Thanks
Oracle Reports Team

RoboHelp 10: Problems generating Printed Documentation

Environment
Windows 7 Enterprise, Service Pack 1, 64-bit operating system
Office Professional Plus 2010 Versions 14.0.7106.5001 (64-bit)
RoboHelp 10: 10.0.0.287
Visual Studio 2010 Professional. I open RoboHelp from within Source Control (have been doing it for two years).
Problem
Sometime after moving to RoboHelp 10, and even after successfully generating Printed Documentation output, I encountered a major problem generating Printed Documentation from RoboHelp: “Internal error encountered. Failed to generated Printed Documentation”. The error occurred when I tried to generate Printed Doc using my default TOC, which looks something like this:
Topic A
Topic B
Book 1
Book 2
Book 3
Topic C
Topic D
Based on an old Peter Grainge reply to someone about a similar problem, I removed all but the first topic from the Chapter Layout pane and generated the Help. Everything was fine until I got to the topics after Book 3. At that point everything started to fail again. When I removed Topics C, D, etc. from the Chapter Layout pane, the output was built successfully.
I tried moving Topics C, D, etc. to the top of the Chapter Layout pane, and got the same error. I tried creating a new folder and put Topics C, D, etc. into that folder. Failure after failure.
As an experiment, I removed all the Topics C, D, etc from the Chapter Layout pane, but then added them to the Print Document Section Layout pane (not where I want them). The Printed Documentation built successfully.
During attempts to build with Topics C, D, etc. in the Chapter Layout pane, I kept getting a Word error: Word is trying to recover your information. After that there was always a failure.
Selecting PDF as the output did not work when the Topic C, D, etc. files were at the bottom of the Chapter Layout pane.
I create a new TOC and a new Printed Documentation SSL. Failed to generate.
As a matter of reference, I've been generating Printed Documentation from the same TOC for more than a year and so cannot figure out what has changed in RoboHelp or Word to cause this grief .
Has anyone experienced anything like this?
Carol

Dear Peter,
Thanks for following up. Last Friday I finished extensive testing on my own and working with RoboHelp Support. Here's what I sent to Support this morning.
If after reading this screed, you think it worthwhile for me to get a copy from Source Control for you to look at, I will do so. Thanks for offering to look at it.
Environment
Windows 7 Enterprise Service Pack 1, 8.00 GB RAM, 64-bit OS
Microsoft Office Professional Plus 2010 Version 14.0.7106.5003 64-bit--Note: We repaired my current version of Word, in case that was the problem, but did not reinstall Office--we do not think that the Word version is the problem because we generated successfully with other TOCs and when generating individual documents.
RoboHelp 10.0.1.292. Upgraded from RoboHelp 9 in May 2013. Replaced hard drive in September 2013 and reinstalled RoboHelp.
Visual Studio 2010 Professional 10.0.40219.1 SP1Rel (I open the project from Source Control and check files out to a folder on my desktop.)
Issue
Printed Documentation failed multiple times with the default Table of Contents, which contains all the topics in the project. TOC specs are as follows:
Properties: .docx, desktop location, no conditions, embedded images, “Generate a single document”, “Retain hyperlinks”.
330 files, 12 top-level books, 15 second-level books, 7 third-level books, 6 fourth-level books, and 8 fifth-level books
Results
Generation to Printed Documentation does NOT fail for other, module-specific TOCs, nor to WebHelp Pro SSLs for the same sets of topics. In addition, and perhaps more important, generation to Printed Documentation does NOT fail with “Generate Individual Documents” selected, or when there are approximately fewer than 259 files in the TOC.
Did not fail consistently based on any particular topic.
Did not fail consistently based on location of any particular topic in the TOC.
Failed when I created new TOCs based on ‘working’ TOCs. For example, copied a module-specific TOC and then added topics to it from the default (superset) TOC. I did this in case the original default TOC was corrupted.
Failed when I create a new TOC with the same folder/file structure from scratch.
Failed when I created a new TOC with a flat file structure from scratch.
Failed when I retrieved an older TOC from the last release of the product.
Failed when I created new SSLs each time. I did this in case the SSLs had got corrupted.
Failed when I did not open the project from Source Control (removed project from Source Control and worked locally).
Began to see failure when there were more than about 258-263 files in the TOC. For example, successfully generated Printed Documentation with 262 files in the TOC. Added one topic and the generation failed. Removed that topic and added several others, one at a time. Consistently failed. To test this, I created a TOC with all the files in a flat structure, generated a report for the TOC, printed it, and counted the number of files. I then began deleting files and regenerating the Printed Document to try to identify the number of files in the TOC when the generation failed. Successfully generated up to about 258 files and then it began failing. (Occasional successes at 260 and 261, but that may be because I didn’t always consistently remove the Glossary and Index from the Chapter Layout pane.)
Other Comments
(I know that we should generally post non-RH issues to other forums, but in this case I wanted to include all potentially related issues in this posting.)
The first time you generate any type of output, the “Critical error of Source Control Provider. Please restart IDE.” Message appears. This message appears behind RoboHelp. As a result, if the RoboHelp window is maximized, you think that RoboHelp is hung. Forcing a close of RoboHelp leaves the partially generated Word document in an unstable state. When you re-open RoboHelp and try to generate the output again, RoboHelp says that the output is in use. Unfortunately, there is no way to ‘free’ the Word document and you have to restart the computer. In addition, when the dialog box is hidden, even using Alt+Tab to find the dialog box is complicated because you can’t grab it and click OK until RoboHelp completes its processing. The workaround is to reduce the size of the application window so that you can see the dialog box and try to quickly grab it and click OK. That said, as soon as processing is complete you can grab the dialog box and click OK; at that point RoboHelp displays its own error message about the success or failure of the output generation. It is not clear whether the RoboHelp API or Source Control puts up this error message, but it’s definitely a problem until you happen upon the workaround.
RoboHelp does not check SSLs even when I right-click the SSL in the Single Source Layouts pane, click Check In, select the XML and SSL files, and leave “Keep checked out” deselected. The red check mark remains next to the SSL name. In addition, even when I Check In All files before closing the project, the next time I open the project RoboHelp displays a series of Check In dialog boxes requiring me to check them in again.
When RoboHelp hangs during a Printed Documentation failure and the Version Control setting is to check in all files when closing a project (which I’ve now deselected to avoid this problem), Ctrl+Alt+Del indicates that you cannot shut down the program because RoboHelp is waiting for a response. Yes, RoboHelp was waiting for me to check in some files (because of the Version Control setting), but hid the Check In Source Files dialog box behind the application. This usually left a Word document in limbo, forcing me to restart the computer.
At one point RoboHelp stopped saving changes to an SSL after I made changes and clicked Save and Generate. Each time I reopened the SSL, I had to select .docx, etc. all over again.
Carol

Com.adobe.ProcessingException: No output was generated while rendering

Hi gurus,
We have an ESS implementation working on our portal system.
Our portal system is EP 7.0 support package level is 15. Our backend system is SAP ECC 6.0.
Forms in ESS implementation are viewed via Adobe Acrobat.
I configured Adobe in our sap ecc system and portal. It worked for 3 months without any problem till yesterday. Our users started to get "Error at start of form processing" error when they tried to view the forms. I searched the cause of the problem at portal side and found a log in default.trc:
"Processing exception during a "Render" operation.
Request start time: Mon Jun 23 16:48:09 EEST 2008
com.adobe.ProcessingException: No output was generated while rendering: Stream for: PDFOut.
Please validate the input files or streams and try again.
Exception Stack Trace:
com.adobe.ProcessingException: No output was generated while rendering: Stream for: PDFOut.
Please validate the input files or streams and try again.
     at com.adobe.ads.operation.Render.execute(Unknown Source)
     at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
     at com.adobe.ads.request.Request.processOperations(Unknown Source)
     at com.adobe.ads.request.Request.process(Unknown Source)
     at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
     at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
     at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
     at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
     at SoapServlet.doPost(SoapServlet.java:51)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)"
I checked the configuration step by step using the note-944221 everything works well.
Any suggestions? It is urgent please help.
Helpful answers will be awarded with points.
Tolga

Dear Chintan,
I did check the settings about the user ADSUSER. ADSUSER was set as technical user so the expiration of the password is not possible.
If there were a problem about the wrong password for ADSUSER in visual administrator or at portal side or in sap system, viewing the adobe form would not be possible from the start.
And one last interesting thing is that the problem was solved after the restart of the portal system.
Any other suggestions?
Kindest Regards
Tolga

XML output problem

Hi,
I'm having problems generating XML in managed bean.
If I put in a method within a managed bean something like:
public String getXML() {
return "<something>";
and then access the method getXML in a JSF page I get an output, where <> signs are replaced with > ....
How can I create an XML with a JSF, so I can use XSL transformations?

I have now a litte bit more complex task. For each value of FIELD2, there are 2 attributes in a separate table. Instead of displaying value of the FIELD2 in the XML, I'd rather need those 2 attributes. I am doing this:
with t as
select 'A' field1 , 1 field2 from dual
union
select 'A' field1 , 2 field2 from dual
union
select 'A' field1 , 3 field2 from dual
union
select 'B' field1 , 4 field2 from dual
a as
select 1 field2, 'a11' attr1, 'a12' attr2 from dual
union
select 2 field2, 'a21' attr1, 'a22' attr2 from dual
union
select 3 field2, 'a31' attr1, 'a32' attr2 from dual
select
xmlelement("TOP", xmlelement("FIELD1", field1),
                  xmlelement("DOWNS", XMLAGG(
                  xmlforest(a.attr1, a.attr2))
from t, a
where field1 = 'A'
and t.field2 = a.field2
group by field1which gives me the output:
<TOP>
     <FIELD1>A</FIELD1>
     <DOWNS>
          <ATTR1>a11</ATTR1>
          <ATTR2>a12</ATTR2>
          <ATTR1>a21</ATTR1>
          <ATTR2>a22</ATTR2>
          <ATTR1>a31</ATTR1>
          <ATTR2>a32</ATTR2>
     </DOWNS>
</TOP>This is very close to what I need, but how do I get this:
<TOP>
     <FIELD1>A</FIELD1>
     <DOWNS>
           <DOWN>
          <ATTR1>a11</ATTR1>
          <ATTR2>a12</ATTR2>
           </DOWN>
           <DOWN>
          <ATTR1>a21</ATTR1>
          <ATTR2>a22</ATTR2>
           </DOWN>
           <DOWN>
          <ATTR1>a31</ATTR1>
          <ATTR2>a32</ATTR2>
           <DOWN>
     </DOWNS>
</TOP>?
Thanks for any help.

Problem generating Key with keytool command

Hi Everyone;
I'm having problems generating a key.
Here's my output.
C:\>keytool -genkey -alias learningIdeas -keysize 1024 -validity 365 -keyalg RSA
Enter keystore password: changeit
keytool error: java.io.IOException: Keystore was tampered with, or password was incorrect
note i already did something with the keystore such that i have generated a key and placed this in server.xml
<Connector className="org.apache.tomcat.service.PoolTcpConnector">
<Parameter name="handler" value="org.apache.tomcat.service.http.HttpConnectionHandler"/>
<Parameter name="port" value="8443"/>
<Parameter name="socketFactory" value="org.apache.tomcat.net.SSLSocketFactory" />
     <Parameter name="keystore" value="C:/stephen" />
     <Parameter name="keypass" value="changeit"/>
     <Parameter name="clientAuth" value="false"/>
</Connector>
any ideas on what I can do to generate this key?
stephen

I have almost resolved this problem. I'm at the last step and getting an error message when trying to import the certificate that I received from verisign into my keystore.
here's my error.
C:\>keytool -import -alias mycompanyname123 -keystore STEPHEN4 -file mycompanyname.cer
Enter keystore password: changeit
keytool error: java.security.cert.CertificateException: Unsupported encoding
but when I double click on this file mycompanyname.cer (which is exactly what I received from verisign, up comes the appropriate certificate
i was able to succesfully able to install it into the microsoft browser and i see it correctly represented and displayed in the certificates section for OTHER PEOPLE.
But I think i have to successfully import it into the keystore for it to work properly right when I start up the tomcaat app is that correct?
any ideas?
Stephen

Macbook mini DVI to DVI output problems

hi
I've been using a samsung syncmaster 22" with my macbook for about a year now with no problems using the mini DVI to DVI connection
then earlier this week i used a different DVI cable to plug my playstation 3 into the screen, when i plugged the computer DVI cable back into the screen lots of red/pink pixels have taken over the screen and when the desk is nudged red lines flash up
i thought it might be either the DVI cable or the mini DVI to DVI adapter and replaced both to no avail, i have also tested all the cables on other screens/with other computers, and tested the screen with my playstation. Screen and cables all work fine so i think it must be some kind of output problem, but cant work out what it could be seeing as nothing would have happened to the port on the actual computer whilst changing connections on the samsung screen
sorry for the long winded post, really wanna know what the problem is here

Hi cbeth,
welcome to macbook forum.
For your friend macbook, try to press F7 back and forth to switch between mirror and expanded mode.
Try to update your macbook hardware firmware and software using software updater and repair permission after that...application/utilities/disk utility/repair permission.
Also reset your PRAM and PMU.
Open your friend system preference / display and try to compare and set yours similar to hers, including resolution, color depth, refresh rate.
Good Luck.

Problem generating stubs for Java EJB web service deployed in OAS

I created an EJB web service and I've successfully deployed it in my Oracle App Server. Some of the methods work fine but others produce the ff error:
org.apache.soap.SOAPException - java.lang.IllegalArgumentException: No Serializer found to serialize [classname] using encoding style [encoding]It seems that the objects specified as parameters in the web service methods exposed are the only ones that had stubs generated for them. Other objects I use, which are usually wrapped inside a Vector, did not have generated stubs.
Example:
public String loginUser(UserDTO userDTO) throws RemoteException, NamingException, SQLException;
public String addItems (Vector vecItems) throws RemoteException, NamingException, SQLException; // where vecItems is a collection of ItemDTO objects In this scenario, stubs were generated for the UserDTO class, but not for the ItemDTO class. In effect, calling the addItems method resulted to the exception I mentioned above.
I did a workaround wherein I declared a dummy method which accepted all the types of objects I needed as parameters so all the necessary stubs can be generated, but this fix doesn't feel like it's the proper solution to my problem.
If anyone can help me, it would be greatly appreciated. Thanks!

Crossposted:
Problem generating stubs for Java EJB web service deployed in OAS

Mac mini audio output problems

This is similar to a problem that appeared before, but with a different twist.
On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
(And I think it's still under warranty for a couple more weeks.)
Mac mini Mac OS X (10.4.10)

hello mini users with the "no audio output" problem
it seems that there are faulty output jacks in the macbook and the mac mini
there are two things you can try:
i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
macam installs a file called "macam.component"
if you have the same, do this - take that file out of:
(your hard drive)/library/quicktime - macam.component
and just put it on your desktop
restart, then in your sound pref's choose your audio output (if doesn't work restart again)
the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
it seems macam causes the problem, the two can not work at the same time.
the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
my mini does not have a red light on. i tried using a paperclip but it doesnt work.
hope this helps, beleive me i feel your pain!!!!
what good is a computer without sound?
extremely annoying problem that i hope apple looks into and fixes
-andrew

[svn:fx-trunk] 8456: Output the generated info()["backgroundColor"] in a hexadecimal format.

Revision: 8456
Author:   [email protected]
Date:     2009-07-08 10:23:46 -0700 (Wed, 08 Jul 2009)
Log Message:
Output the generated info()["backgroundColor"] in a hexadecimal format.
In previous releases the info()["backgroundColor"] was whatever was specified in the Application class of an mxml. For example, now "red" and "#FF0000" will be convert to "0xFF0000".
QE Notes: none.
Doc Notes: none.
Bugs: SDK-21723
Reviewer: Paul
tests: checkintests
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21723
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java

clfarron4 wrote:
So you have nVidia's Hybrid Graphics system, also known fondly as nVidia Optimus. These links should get you started:
https://wiki.archlinux.org/index.php/NVIDIA
https://wiki.archlinux.org/index.php/NVIDIA_Optimus
The point is that I don't want to install Nvidia drivers. It should be a mobile system, that's why I need Nouveau.
I want it to work with ATI's, Intel's and Nvidia's graphic cards,
The funny thing is that I've already done it before - I've successfully installed Arch on USB with Nouveau drivers, so I know that it is possible.

Problem generating manifest. Could not load file or assembly or one of its

Dear all,
i am using visual studio 2008 on windows7 (32 bit). my project was running very fine but today i received the following error when i build my project
"Problem generating manifest. Could not load file or assembly or one of its dependencies. An attempt was made to load a program with an incorrect format"
i have deleted all the refrences and then added all one by one , all refrences added successfully, but when i added "CrystalDecisions.ReportSource" and build the application i found the above error. '
i will be very thankfull if anyone could help me
Regards.

What version of Crystal Reports?
- Ludek

Premiere Elements 12 output problem

I am having problems outputting my project. Different errors messages. One says transcoding error. Another time it says export error. Other times it crashes. And then the program won't even open.
Any suggestions?
bwatson9

Steve,
First, thank you for your prompt response. This is the first time I have used Premiere Elements 12. I don't seem to have a manual for the software.
The product was bought with my new computer. I am using windows 8.1 (64-bit) with Intel Core i7-4770 CPU @ 3.40GHz. I have 12 GB of installed RAM. I have 1TB hard drive of which this is the first project I done.
I have checked to make sure that I am getting all Windows and Microsoft Updates. I even manually went to Windows Update and installed the optional updates.
The project is a 20 min. video using mostly photos and 2 small video clips. The project is saved in its own folder.
When I go to the timeline in Expert view I do see an orange-yellow line above the timeline. It runs the whole length of the project.
I understand from reading the FAQ's that each photo cannot be larger than 1000 x 750 pixels. I will check that and reduce their size. Is there anything else that I need to do?
Where can I find a manual?
Thanks,
bwatson9
Date: Sun, 23 Mar 2014 06:31:03 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Elements 12 output problem
    Re: Premiere Elements 12 output problem
    created by Steve Grisetti in Premiere Elements - View the full discussion
A lot depends on a lot.
What operating system are you using? What processor do you have and how much RAM and how much free space is on your hard drive?
How long is your project? What model of camcorder is your video coming from and what format and resolution is it?
Have you ensured that your project file is saved to its own folder, with no other project files in this folder?
When you add your video to your timeline in Expert view, do you see a yellow-orange line above the clips, along the top of the timeline? This indicates a mismatch between project settings and video specs.
If you are on a Windows computer, have you set up your computer to get both Windows and Microsoft Updates -- and have you manually gone to Windows Update and ensured you have even the optional updates that don't install automatically?
When did you last run Disk Cleanup and Disk Defragmenter?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6234402#6234402
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6234402#6234402
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6234402#6234402. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Graphic output problems in most programs - triangles ...

- often at scrolling in the Finder
- it appears spontaniously and dissappers/flicker if mouse is moving ...
- in some programs it is permanent for example 3D Coat
- different often and strong in different programs - in some there is no problem (5% - for example ZBrush)
- Mountain Lion does not fix it - only some changes - for example Quicktime (not Fullscreen) a big triangle in the down left
- little greeen/red pionts, like defect Pixels, in little groups are appearing too! - Photoshop, Final Cut Video Output...

A screenshot give you a copy of what is actually sitting in the screen buffer.
So this is not an "output" problem. That stuff has been messed up in the screen buffer.
to draw the mouse cursor, the area around the pointer must be re-constructed. That is why moving the mouse cursor seems to "repair" it.

Print Output problem in ECC6

Hi Friends,
I am getting print output problem in ECC6.
In VF03 I am giving issue output for invoice printing. Whenever I am presseing issue output one screen is coming for selecting output type. I have selected one output type and I pressed print preview then in print preview one item and corresponding amounts it is showing properly for the first time. But the problem is after the print preview if I come back and again if i press print preview button values are not getting refreshed and same item is repeated for twice and the amounts are also getting added. Again for the third time if i come back and again if i press print preview one more item is getting repeated and the amounts are also getting added which should not suppose to happen.
What could be the problem and how to resolve it?
Rewarded,
Steve

Hi,
clear those variables in the program .
Regards,
Bharat.
Reward points if helpful

J Option Pane Output Problem

Hi guys,
I am new to Java and I am having trouble compiling this program via which I can calculate the number of months to pay off a loan.
I am not sure why it is not compiling and would really appreciate some solutions or suggestions
Thanks a lot.
import javax.swing.JOptionPane;
public class Final
public static void main(String[] args)
String LoanAmount;
String Months;
String AnnualInterestRate;
String MonthlyPayments;
double balance;
double interest;
double payment;
int months=1;
LoanAmount=JOptionPane.showInputDialog("Enter Loan Amount:");
AnnualInterestRate=JOptionPane.showInputDialog("Enter Interest Rate:");
MonthlyPayments=JOptionPane.showInputDialog("Monthly Payments:");
balance=Double.parseDouble(LoanAmount);
interest=Double.parseDouble(AnnualInterestRate);
payment=Double.parseDouble(MonthlyPayments);
months=Integer.parseInt(Months);
while (balance>0)
{balance=(balance+(interest/12)*(balance))-payment;
months=months+1;
JOptionPane.showMessageDialog(null, "Number of Months ", +months);
Edited by: Java1001 on Sep 15, 2009 11:45 PM

A: J Option Pane Output Problem

Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
You are passing 3 parameters -- a null, a String and an int -- to the JOptionPane#showMessageDialog method. In the [_API_|http://java.sun.com/javase/6/docs/api/javax/swing/JOptionPane.html], do you find a variant of this method that accepts these three parameters?
db

Output Problem: Generating

Similar Messages

Maybe you are looking for