Output problem: printer commands are printed

Hi ,
I have created a new page format ( 300 mm * 330 mm ) and i have assigned to a new format in the device type .But what command need to be changed in the printer initialization?
At present when i print my sap script output it prints out the printer commands.
Thanks and Regards,
C.Abhinay

closing

Similar Messages

Smartforms output problem: printer commands are printed on paper

Hi ,
I have created a new page format ( 300 mm * 330 mm ) and i have assigned to a new format in the device type .But what command need to be changed in the printer initialization?
At present when i print my sap script output it prints out the printer commands.
Thanks and Regards,
C.Abhinay

closing

Print commands are disabled in File menu (Multisim 10)

I want to print my circuit, but all Print commands in the File menu are grayed out. I do have a printer installed on my system, which works on other applications. I'm running Multisim 10 (Student Evaluation) on Windows Vista Ultimate 32-bit.
Thanks,
Ricardo Costa

The print option is disable in the evaluation version, it not your printer problem. When you activate this version, the print option will be active.
Tien P.
National Instruments

Print problems only pictures are print not text

Macbook air with caonon mx870.
fonts (text) are not printing anymore only pictures ?

Hello there, marcvdw.
The following Knowledge Base article offers up some great steps for troubleshooting printer issues:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Mail quits when APPLE P comand or menu "PRINT" command are given

When I attempt to print from the menu or from keyboard shortcut to print ie an email, Mail quits as if I've done APPLE key "Q". This does not occur in any other application. This happens no matter what user account it is attempted in.

When an application crashes (i.e. quits unexpectedly), the system writes information about the state of the application at the moment of the crash to a log file. That information is called a crash report and makes troubleshooting easier. In order to find and post the relevant part of the crash report here, proceed as follows:
1. Open ~/Library/Logs/CrashReporter/Mail.crash.log. The whole crash log appears in a Console window (you can also open that file with any text editor). It may contain many crash reports. We only want the latest, which is located at the bottom of the file.
2. Look for a line that begins with “Date/Time:” as close to the bottom as possible, and another that says “Thread N Crashed:”, where N is a number. Select everything from the “Date/Time:” line down to (and including) the lines immediately following “Thread N Crashed:”. Copy that text and paste it in your post. Do not post the whole crash log, and do not include anything beyond the lines immediately following “Thread N Crashed:” either, just the relevant part.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

IPhoto freezing on print command before print menu appears

Has anyone encountered iPhoto freezing when selecting "print" from the file menu, before the actual print menu appears? I'm not using huge files here -- 600 KB photo, for example -- but I get the spinning beach ball of death every time I try to print a photo.
I have 3000 photos in my library, use Panther, have a five-year-old ibook with a 10 g hard drive so I house my library on an external hard drive.
Sound like a preferences file problem, for example? Any advice anyone can offer would help immensely.
Thanks!

That's a whole different animal. You didn't move or rename any of the files from the Finder did you?
Do try cleaning out the cache files with OnyX. Also I'd run the 10.3.9 COMBO updater followed by a repair of permissions with Disk Utility. Reinstalling the latest combo updater can clear up a multitude of issues. Finally, is those don't work make a backup copy of your iPhoto Library folder and then launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all of the options except the last one regarding orphans. Do empty your iPhoto library before the rebuild.
If the rebuild doesn't go as intended and is worse than the original library just trash it and go back to the backup copy. Sometimes it's necessary, most times not. Good luck.

Problem sending output directly to a shared printer

Hi.
I am having problems in generating character reports output directly to my printers, my situation is as follows:
We have a Windows 2003 server running an application server 10g and a forms and reports application, if I connect a printer directly to the server my report output is printed perfectly, the problem starts when I try to print from any client machine, since windows does not let you rename a shared printer (it lets you rename the printer in the machine to witch it is connected but in any other machine sharing this printer Windows appends a "on machineX" to the printer name so this poses a problem when trying to pass a desname parameter to reports since it contains spaces.
I solved this issue by adding a local printer to the server machine pointing to a local port that connects this printer to the physical printer in the client machine, this works all right to print from windows (notepad, DOS print command everything prints perfectly). But my reports won’t print. Whenever I send a report to this printer the job gets into the spool but in the status says "error-printing", this only happens when the jobs are sent directly to the printer. If I lookup the job in the reports server queue it appears as correctly finished.
I can even lookup the .txt file from the reports cache and issuing a DOS print command prints the job without issues in my shared printer.
Hope someone can help me out in this one since I am running out of ideas as to how to solve this issue.
Thanks

I forgot one important piece which is why I am asking the question. I am running the report within an Oracle 10g form. I pass all the parameters across to the Reports Server, as seen above. When I run via the PDF option, I just change the DesType to Cache and DesFormat =PDF. When I run with this, it works and displays the report in a new browser window.
I just want to run the report with the exact same parameters but instead of generating a PDF, I want to run the report and send it directly to the printer without previewing it.
Chris

Problem with printer HPLJ 2430N (Printing only one copy)

Hi Gurus,
Here is my problem,
When we are printing to a printer (AAAA) from SAP it is printing out only one copy, even after mentioning to print N number of copies. It is happening only with this printer (AAAA) with all the users.
It is working fine with word & other excel documents
OS :UNIX (AIX)
SAP: 4.6c
Printer model: HPLJ 2430N
I am using access method: U
Devuce type: ZHP2200: HP LajestJet2200 R.4x+
Please help me out to resolve this issue,

Hi Manu,
Goto SPAD. Select the concerned printer in change mode. Goto its Output Attributes. Under Output request processing you will find several options. There will be a dropdown allowing you to pass number of copies to host spool system. Select that and save. After this check again.
Regards.
Ruchit.

Orientation is wrong when delivery note, pick ticket are printed together!

Hi All,
I am facing this peculiar problem.
When delivery notes and pick ticket both are printed at the same time from VL02N, then the pick ticket is being printed in portrait instead of landscape.
The delivery note should print as portrait and pick ticket should print as landscape.But these when printed together from VL02N transaction, the second one pick list is printed as Portrait rather than Landscape.
The spool is generating correctly (DELIVERY NOTE as PORTRAIT and PICK LIST as LANDSCAPE) but when passed to printer both are printing in PORTRAIT format.
The printer settings are same in PRODUCTION as well as QA.In Production system it is working fine but the same settings are there in QA behaving differently.
The printer model we are using is HP Laserjet 4350.
Please advice.
Regards,
Pratyusha
Edited by: pratyushasdn on Jul 12, 2010 4:59 PM
Edited by: pratyushasdn on Jul 13, 2010 7:26 AM

Dear Pratyusha,
Kindly chck on the production and quality system version of the form. The landscape/ potrait option is passed on to the smartform and should be independent of the driver program / Tcode. Kindly chck on it again and revert

What about a print command?

it´s just a small request: a print command.
file > print > go to printer
what do you think?
thanks a lot
kind regards
ps - by the away, edge code is not listed on adobe wish form, sorry if i´m not on the right path.

Hi Ana,
Edge Code is based on the open-source Brackets project, so most future feature ideas are tracked on its public backlog here. You can upvote the print feature here: https://trello.com/c/6mJSwhYU/934-print-source-code. If you don't see a feature listed on the Brackets backlog, feel free to post a request here.
Printing source code is a relatively uncommon use case these days, so we're unlikely to add this feature in the near future. However, as a workaround you can use the Copy as HTML extension to copy the fully color-coded HTML source code of a file (or part of a file), and then paste it into an app like Word to print it from there. To install this extension, go to File > Extension Manager, click "Install From URL," and then enter the URL I linked to above.
Hope that helps!
- Peter

Colors are printing incorrectly when exported to PDF but print fine from InDeisgn and Photoshop

Documents I create in Photoshop and InDesign and export to PDF print in different/wrong colors. The colors are fine when printed directly from Photoshop or InDesign, they look correct when viewing the PDF, but change when printed from the PDF (specifically blues print as purple). How do I fix this?

This really sounds like a color management issue.
How are you creating the PDF files from InDesign or Photoshop? We recommend using the PDF/X-4 settings for proper printing from Acrobat or any direct PDF RIP/printer.
Also would like to know what type of printer you are printing to.
- Dov

Unnecessary black lines being printed in the printed document

I have an year old HP M1136 Laser jet printer ( Serial No. - CND8B9QJ65 ) and use orignal HP cartridges.
And I use Windows 7 ultimate (32-bit) as my operating system.
I guess, The problem isn't regarding the software. It might have something to do with hardware.
The issue is whenever I give the print command to printer, it prints the document as it is but also adds a bunch of blurred black lines on the left side of the printed A4 sheet. This thing ruins the whole look of the document.
Nothing like this happens when Scan command is given. Its only when the printer receives a Print or Photocopy command.
This problem started appearing in the month of February. At the start I adjusted but now the problem has got bigger. Please help.
An earliest response in this reagrd would be highly grateful.

Hello Shubham22,
First, let me welcome you to the HP Consumer Printer Forums.
I am not sure what would cause the issue you are experiencing. Check out the following link for possible troubleshooting you can try:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02003606&tmp_task=solveCategory&cc=us&dlc=en&la...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Applescript for printing pdf to printer

Anyone that can help me with this:
I need to print a pdf file to a printer from filemaker (applescript i guess)
The filemaker records holds all information needed:
The filename and the path to the pdf file
The number of copies needed
The printer to send it to (different because of duplex simplex)
Anyone who have a script i can implement ?

Assuming you can get the data out of Filemaker (I don't use Filemaker so my example might not be right), it's pretty easy to print PDF files. This should get you started:
tell application "FileMaker Pro"
tell current record
-- the syntax here might not be right!
set theJob to contents of cell "Job"
set thePrinter to contents of cell "printer"
end tell
end tell
tell application "Printer Setup Utility"
set current printer to thePrinter
open alias theJob
end tell
The first part of the script extracts the data from Filemaker (check this, please), then calls Printer Setup Utility to change the current printer to the printer named in thePrinter (which should be the printer name as defined in Printer Setup, and it opens the PDF file (assuming that 'theJob' is a full path to the file itself.
For the number of copies element it's probably easiest to just wrap the 'open' command in a repeat n times block. There is also a print command in Printer Setup which takes an optional with properties but couldn't get it to work in my quick test here.

I have a Windows 8.1 machine. I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

I accidentally solved my mystery. For some reason it was set to "print to file". I changed it to "printer" and now I am able to print.

Output problem: printer commands are printed

Similar Messages

Maybe you are looking for