Output routine fails but still output is issued....Urgent

I have an output routine attached to a output type which generates IDOC. There are different conditions placed in the routine under which SY-SUBRC is made either 4 or 0.
In one of the cases Sy-subrc is 4 but still output is issued and IDOC is generated...
My question is even though output routine is not fulfilled is there a chance of output getting issued on the document ???
Need you help urgently..........

Hi,
Yes the IDOC will be triggered with the different status.
Regards,
Sharath

Similar Messages

AAA authorization fails, but still command is executed...

Hi everyone,
i've implemented authorization and it basically works. The user can only use a limited set of commands (show int status, conf t, interface ethernet, interface gigabitethernet, interface fastethernet, shut, no shut).
Now I try to configure a loopback or Vlan interface, which should not be allowed.
COMMANDS IMPLEMENTED:
aaa authorization config-commands
aaa authorization commands 0 vty group tacacs+ none
aaa authorization commands 1 vty group tacacs+ none
aaa authorization commands 15 vty group tacacs+ none
line vty 0 15
authorization commands 0 vty
authorization commands 1 vty
authorization commands 15 vty
COMMAND AND OUTPUT FROM TESTING:
SWITCH(config)#int vlan 2
Command authorization failed.
DEBUG AAA AUTHORIZATION:
SWITCH#
Dec 7 14:31:50: AAA: parse name=tty1 idb type=-1 tty=-1
Dec 7 14:31:50: AAA: name=tty1 flags=0x11 type=5 shelf=0 slot=0 adapter=0 port=1 channel=0
Dec 7 14:31:50: AAA/MEMORY: create_user (0x46603F4) user='USER1' ruser='SWITCH' ds0=0 port=
'tty1' rem_addr='10.10.255.249' authen_type=ASCII service=NONE priv=15 initial_task_id='0', vrf= (id=0)
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): Port='tty1' list='SCAS' service=CMD
Dec 7 14:31:50: AAA/AUTHOR/CMD: tty1 (60725991) user='USER1'
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV service=shell
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd=interface
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd-arg=Vlan
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd-arg=2
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd-arg=<cr>
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): found list "SCAS"
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): Method=tacacs+ (tacacs+)
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): user=USER1
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV service=shell
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd=interface
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd-arg=Vlan
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd-arg=2
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd-arg=<cr>
Dec 7 14:31:50: AAA/AUTHOR (60725991): Post authorization status = FAIL
Dec 7 14:31:50: AAA/MEMORY: free_user (0x46603F4) user='USER1' ruser='SWITCH' port='tty1' r
em_addr='10.10.255.249' authen_type=ASCII service=NONE priv=15
As you can see the reply from the Tacacs is a "FAIL", but still the command is executed.
RESULT:
SWITCH#sh run int vlan 2
Building configuration...
Current configuration : 38 bytes
interface Vlan2
no ip address
end
QUESTION:
I don't understand what the problem is...Since I get a FAIL from the Tacacs Server I assume that the configuration on that side is fine.
But why would the switch ignore a FAIL and still execute the command? Same problem exists with the Loopback-Interface.
Is this me not understandig the basic concept of AAA or is this some other problem?
The Switch is a Cisco WS-C3750-24TS (running c3750-ipbasek9-mz.122-50.SE2.bin).
The Tacacs runs Cisco Secure ACS4.2.0.124
Thanks,
Tom

Hi Tom,
this is CSCtd49491 : TACACS+ command authorization for interface configuration fails .
The bug is currently in a Closed state, meaning that the "Bug report is valid, but a conscious decision has been made not to fix it at all or in all releases."
As far as I can tell, the impact is rather limited since the interface that gets created will have no effect unless the vlan exists, and even then the effect is minimal since it cannot be configured.
You may want to open a TAC case or work with your account team to get the bug re-opened if this is still a concern though.
hth
Herbert

I cannot install iTunes. I get a Windows Error 126 and missing msvcr80.dll. I've tried uninstalling and re-installing based on all the suggestions, but still have an issue

I cannot install iTunes. I get a Windows Error 126 and missing msvcr80.dll. I've tried uninstalling and re-installing based on all the suggestions, but still have an issue. I've removed all the services, tried moving the dll files as suggested, but I still have no success. Spent all day on this issue. I am running windows 7.

Sorry to hear this isn't going smoothly for you. Try Troubleshooting issues with iTunes for Windows updates. You may have seen some of the suggestions here before but is has taken some users more than one attempt.
tt2

I unregistered my iphone but still am having issues getting texts from iphone users. Anyone know how to fix this?

I unregistered my iphone but still am having issues getting texts from iphone users. Anyone know how to fix this?

Turn off iMessage on the old iPhone.
Restore the iPhone as new.
Have the other iPhone users delete the current message thread, and start a new messae to you.
Have the other iPhone users delete your contact, then re-add it.
Go to ww.icloud.com and remove the device from your Find My iPhone.
Go to appleid.apple.com and change your primary email address and/or password.
Contact Apple Support at getsupport.apple.com for further assistance if these steps don't work.
Wait about 30 days for the iMessage server to self-correct the issue.

Could not connect to internet even when my cellular data is ON. Have tried the steps mentioned in "trouble shooting cellular data" but still the same issue exists. Can anyone please help me out

I am unable to connect to internet on My iphone 5. I have turned on Cellular data and also 3G but still could not connect.
I have also tried the steps mentioned for touble shooting cellular data, restarted my phone, turned on airplane mode and turned off. removed my sim and inserted back. Still internet connection in not getting connected.
Please can anyone help me out from this issue.
Regards,
Josh

Do you have voice service? If you have voice service but just no cellular data service, I would suggest calling your carrier as you may just have an improperly provisioned account with them, or a bum SIM card.

Optical out fail, but still shining?

Hi,
I have previously used my optical out fine. Recently I have tried using it to no luck. There is light shining through my optical cable. The mac automatically sets the output to optical. But no luck with my devices. (Surround sound a DAC) Anybody know anything I can try? Can this be a hardware issue if its still emmiting light and registering it automatically?
Thanks

Hi there Jmttdr,
While the symptom listed is not the exact issue your are experiencing, I would still recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
-Griff W.

Displaylink usb monitor adapter - working but still a few issues

hello,
i didn't want to necro this post
so at work i'm using arch on a 2013 mac air. works very well.
i have a 2nd monitor using the mini-displayport, works very well.
i can run this in portrait or landscape mode.
i was given a displaylink usb to dvi external monitor link. i believe it is this model.
so, i followed the directions on the wiki...
- installed `xf86-video-fbdev`
- blacklisted `udl`
- and ran `xrandr --setprovideroutputsource 1 0`
now in arander i can enable the 3rd monitor and use it
but there are 2 remaining issues:
1. i can only use the external monitors in landscape mode. if i rotate it into portrait x crashes. when i do not use the usb link the mini-dp monitor works in portrait, but w/ both neither can be in portrait mode
2. i cannot seem to script the `xrandr --setprovideroutputsource 1 0` in my .xinirc file. i tried to run it in the beginning or at the end right before loading my wm (herbstluftwm) and neither seems to work.
any suggestions?
thank you
--- update ---
so i wrote a script that automates the xrandr provider output source bits. it's kind of hacky but i can live w/ it. i still cannot get monitors in portrait mode ;~;
Last edited by xero (2015-05-01 16:53:52)

This is what I am running:
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(fuse !eeepc_laptop !snd-pcsp)
and I load eeepc_laptop in the background in rc.local - that makes my boot considerably faster.
For daemons:
DAEMONS=(syslog-ng crond hal rpcbind nfs-common netfs wicd alsa @laptop-mode @firestarter @openntpd)
You can replace fam with gaim (and you don't need it in your daemons) and you don't need dbus...
For policy kit:
<config version="0.1">
<match user="jason">
<match action="org.freedesktop.hal.storage.*">
<return result="yes"/>
</match>
<match action="hal-storage-mount-fixed-extra-options">
<match user="jason">
<return result="yes" />
</match>
</match>
<match action="hal-storage-mount-removable-extra-options">
<match user="jason">
<return result="yes" />
</match>
</match>
<match action="org.freedesktop.hal.power-management.shutdown">
<return result="yes" />
</match>
<match action="org.freedesktop.hal.power-management.reboot">
<return result="yes" />
</match>
<match action="org.freedesktop.hal.power-management.suspend">
<return result="yes" />
</match>
<match action="org.freedesktop.hal.power-management.hibernate">
<return result="yes" />
</match>
</match>
</config>
-that should see you able to mount SD cards and power down.
Let me know how you get on.

Having trouble sync'ing. Receiving Overcapacity error on my 64GB iPhone 5. Backed up and restored but still having sync issues.

I have an iPHone 5 64GB with iTunes 11 installed on an 2 yr old HP laptop running Windows 7. I am having sync'ing issues. I am receiving an overcapacity error I have not seen before even though I can manually remove audiobooks I have previously loaded to get the overcapacity down below the available 64GB limit. I have removed most of them now and can get the sync to begin. Not sure if it will actually complete. But now I do not have but a relatively few audio books loaded. I have backed up and restored to see it that helps but am still getting the same overcapacity error. Seems whatever I had included was doubled in an "other" category. Also, in the recent upgrade to iTunes, it takes forever to sync when I change content. Sync'ing takes a lot longer than before. Has anyone else experienced similar performance issues.

Lawrence Finch has previously provided the following helpful info...
"Other" data is real data that you put on your phone by using the built in apps. It is not music, not videos, not pictures and not App Store app data. It is "OTHER" meaning everything that does not fall into these categories. Such as:
email messages and attachments
Reminders
Calendar entries
Contacts
Text messages (*** this can take up a lot of space)
MMS messages and attachments
Genius data
Music cover art
Operating system settings
Safari cache
bookmarks
Game Center status
Music catalog
If you have a lot of text messages stored, that can make "Other" very large. Another problem area is corrupted files. When app and data files become corrupted, they may end up in "Other". To fix that, perform a restore from a recent backup. That prevents corrupt files from showing up.

Video download failed but still charged me!!!!

I had just recently bought a music video from itunes but the download didn't work then when i looked it still charged me for the incomplete download!!!!! how do i get my money back?

If your download gets interrupted mid-flow it usually resumes next time you start iTunes. Just occasionally however the item may complete the transfer to your download folder, but fail to be copied into your main library. Have a look inside the download folder to see if you can see any evidence of the file in question. It might also be worth checking the Movies section in case iTunes has failed to set the Media Kind as Music Video.
tt2

Routine fails but the condition record is picked up

Hi,
I have a situation here. Where in we have a condition type for customer specific discounts that ZDSP. Now there is requirement routine attached to the condition type. The funny thing is when I look at the analysis. I see that the condition had been ignored. Which is correct as the requirement was not fulfilled. But then after thay it shows that it continued to find the condition record and fetched it. This lead to the discount being applied.
My question is when the requirement was not fulfilled the system ofcourse through a message 111 stating ''Condition ignored (requirement 939 not fulfilled)'. But then why does it proicees to find the condition record and apply the discount.
Any help would be really appreciated.
Regards,
Imran.

No, it is the 'Pricing type'. It is not the one in the condition type. I am pasting part of the code which is causing the problem.
*-- compare old <-> new
    check <lv_value_old> ne <lv_value_new>.
*-- change on field -> set pricing type to C
    cv_knprs = lcv_knprs_c.
In this code for the pricing procedure (KALSM), the system is trying to get the KOMP fields to compare. Below is the list of fields it brings to compare.
QUSTR           QUFNA
KOMP     /DBM/LABVAL
KOMP     KONDM
KOMP     PMATN
KOMP     USR00
Now it checks if the old KOMP values match with the new KOMP values.
I guess, what I have to do is add one more field ZZJBTYP to this list and things should fall in place.
The problem is I do not know where this customization is to be done. I need some help here friends.
Regards,
Imran.

MacBook "repaired" but still having overheating issues? Help needed

I just got my 13" MacBook Pro back from being repaired (apple replaced the display and the logic board), and now it is running at 83 degrees C (according to iStat Pro) and the fans are only at 2000rpm. Is that normal? My computer never used to be this hot. I can't even hear the fans running.
Thanks
PS Can I still call apple free of charge for technical support questions after the 90 day period if I don't have Apple Care (I am within the one year warranty)?

I am only web browsing, and I am holding it on my lap, though my knees are supporting the edges and there is nothign but air underneath of the machine, so the fan air exit is not being blocked.

Mail delivery fail but still received mail

hi
i keep receiving 2 messages straight after receipt of the original which is readable..
1st message: mail delivery fail
2nd message: undeliverable
i have no problem reading the original message
regards
kel

This is a problem with your recipients ISP not delivering the email, or with Comcast in not sending it once it reaches their mail servers. You should check with your recipients to find out if they use the same ISP, and have them check with the ISP to ask why mail sent from a Comcast account is not being delivered.
If this affects all your recipients (assuming there are many more than just the two you mentioned), then its a Comcast issue and you should call them and insist they make any necessary changes so everyone can receive email from you. If it only affects those two recipients, they would need to call their ISP and have them make the necessary changes.

[Solved] Constructed a multi-purpose prompt but still have 1 issue

I didn't think re-opening my old thread was a good idea so I'm starting new one to address 1 issue I have left to conquer.
With some help from JWR I have built my prompt and it works for users and root logged into a local machine. Logging into a remote machine does change my user's prompt by appending :ssh: to it. However, as the root user logged into a remote machine, which should have the :ssh: appended to it, doesn't work. By that I mean that root logged in to a remote system doesn't get the correct prompt. I want the prompt to look like this for root:
:root: ~ :ssh:
Instead I get this prompt which lacks the word "root" in it:
: ~ ::ssh:
This is my prompt script so far and I'd really appreciate some help to nail down this glitch.
The script for root and user are identical apart from having a different prompt uncommented.
### Other prompt styles to use later
This is root's current script:
### A PS1 for each computer is on the respective lines in this order:
### ### White Yunzi / Silver Yunzi / Pink Yunzi / Rainbow EeePC
if [[ -n $SSH_CLIENT ]]; then
# PS1='\[\e[0;37m\]: \[\e[1;32m\]\W\[\e[0;37m\] :\[\e[0;37m\]:\[\e[1;33m\]ssh\[\e[m\]\[\e[0;37m\]: ' # WY SSH
PS1='\[\e[0;37m\]: \[\e[1;33m\]\W\[\e[0;37m\] :\[\e[0;37m\]:\[\e[1;33m\]ssh\[\e[m\]\[\e[0;37m\]: ' # SY SSH
# PS1='\[\e[0;37m\]: \[\e[1;35m\]\W\[\e[0;37m\] :\[\e[0;37\m]:\[\e[1;33m\]ssh\[\e[m\]\[\e[0;37m\]: ' # PY SSH
# PS1='\[\e[0;37m\]: \[\e[1;33m\]\W\[\e[0;37m\] :\[\e[0;37m\]:\[\e[1;33m\]ssh\[\e[m\]\[\e[0;37m\]: ' # EeePC SSH
elif [[ ${EUID} == 0 ]]; then ## :root: ~ :
# PS1='\[\e[0;37m\]:\[\e[1;32m\]\u\[\e[0;37m\]:\[\e[0;37m\]: \[\e[1;92m\]\W \[\e[0;37m\]:\[\e[m\] \[\e[0;37m\] ' # WY root
PS1='\[\e[0;37m\]:\[\e[1;34m\]\u\[\e[0;37m\]:\[\e[0;37m\]: \[\e[1;34m\]\W \[\e[0;37m\]:\[\e[m\] \[\e[0;37m\] ' # SY root
# PS1='\[\e[0;37m\]:\[\e[1;35m\]\u\[\e[0;37m\]:\[\e[0;37m\]: \[\e[1;35m\]\W \[\e[0;37m\]:\[\e[m\] \[\e[0;37m\] ' # PY root
# PS1='\[\e[0;37m\]:\[\e[1;33m\]\u\[\e[0;37m\]:\[\e[0;37m\]: \[\e[1;33m\]\W \[\e[0;37m\]:\[\e[m\] \[\e[0;37m\] ' # EeePC root
else ## : ~ :
# PS1='\[\e[0;37m\]: \[\e[1;32m\]\W\[\e[0;37m\] :\[\e[m\]\[\e[0;37m\] ' # WY user
PS1='\[\e[0;37m\]: \[\e[1;34m\]\W\[\e[0;37m\] :\[\e[m\]\[\e[0;37m\] ' # SY user
# PS1='\[\e[0;37m\]: \[\e[1;35m\]\W\[\e[0;37m\] :\[\e[m\]\[\e[0;37\m] ' # PY user
# PS1='\[\e[0;37m\]: \[\e[1;33m\]\W\[\e[0;37m\] :\[\e[m\]\[\e[0;37m\] ' # EeePC user
fi
## :root: ~ :ssh:
#PS1='\[\e[0;37m\]:\[\e[1;34m\]\u\[\e[0;37m\]:\[\e[1;34m\] \W \[\e[0;37m\]:\[\e[m\]\[\e[0;37m\]\[\e[1;33m\]ssh\[\e[0;37m\]: ' # SY root
## :root:: ~ :ssh:
#PS1='\[\e[0;37m\]:\[\e[1;34m\]\u\[\e[0;37m\]:\[\e[0;37m\]: \[\e[1;34m\]\W \[\e[0;37m\]:\[\e[m\]\[\e[0;37m\]\[\e[1;33m\]ssh\[\e[0;37m\]: ' # SY root
## :root:: ~ ::ssh:
# PS1='\[\e[0;37m\]:\[\e[1;34m\]\u\[\e[0;37m\]:\[\e[0;37m\]: \[\e[1;34m\]\W\[\e[0;37m\] :\[\e[m\]:\[\e[m\]\[\e[0;37m\]\[\e[1;33m\]ssh\[\e[0;37m\]: ' # SY root
Last edited by MoonSwan (2014-11-19 09:23:02)

jasonwryan wrote:So it works for root locally, just not when you SSH in as root or change to root in an SSH session?
Yes, you're quite correct.
jasonwryan wrote:Also, it might help if you remove the commented lines, it is pretty hard to work out what is going on in there...
I agree and I found a bunch of \'s that I missed. Sorry about that!
Here's the config stripped of extraneous junk:
if [[ -n $SSH_CLIENT ]]; then
PS1='\[\e[0;37m\]: \[\e[1;32m\]\W\[\e[0;37m\] :\[\e[0;37m\]:\[\e[1;33m\]ssh\[\e[m\]\[\e[0;37m\]: ' # WY SSH
elif [[ ${EUID} == 0 ]]; then ## :root: ~ :
PS1='\[\e[0;37m\]:\[\e[1;32m\]\u\[\e[0;37m\]:\[\e[0;37m\]: \[\e[1;92m\]\W \[\e[0;37m\]:\[\e[m\] \[\e[0;37m\] ' # WY root
else
PS1='\[\e[0;37m\]: \[\e[1;32m\]\W\[\e[0;37m\] :\[\e[m\]\[\e[0;37m\] ' # WY user
fi
Edit: stripped out two comments I'd missed earlier.
Last edited by MoonSwan (2014-11-19 08:27:27)

N73 firmware update failed but still working?

Few days ago I saw new firmware for N73 is out. Downloaded program, stared to update firmware.
After cca. 90% of progress bar I heard same sound you hear every time you plug in/out your phone over USB cable. My heart almost stopped since I heard stories you must not unplug phone during firmware update, that it will not work after that. Suprisingly software offered me to repeat update process!
I clicked OK and it started all over again.
Once again after reaching about 90% progress bar instalation stopped with same un plugg sound. This time there was no repeat update offer. I tryed everything but update din't work.
I plugged USB out of comp and phone and tryed to turn on phone. I wasn't able to turn in on! Then I took out battery, put it back in and turned on phone.
All worked, menu was in english, but I had option to change it back to croatian again. Installed old programs and they all worked. Voice dialing working, camera working... all working.
What the hell happened?
Why installation stopped on 90% and my phone is working without problems on NEW firmware? Bug in Nokia Firmware update software?

I've understood it's quite normal that the update prosedure may seem to stop even for some minutes and then go on again. The connection between the phone and computer will also break and then reconnect couple of times...
Are you sure, you did wait long enough before unplugging your phone (at least some minutes)?
But if your phone has the new firmware now and everything is working fine so I hope there is no problem!
Nokia N97 v. 12.0.024

In app purchase failed but still got billed

I wanted to buy 51 gold for battle camp,so i tapped the option for 51 gold,and it prompted me for my password,so as usual i enter it in,and the circular loading icon shows up,and then asks me again whether i want to buy the 51 gold pack for confirmation,so i tap yes or buy,didnt really notice,and the loading icon popped up again and then it dissappeared,i checked my gold,3 gold left(that was the gold i left from previous transactions).So i got worried as this is my firt time and i restarted the app,still no gold,then it keeps prompting me to enter my password.I then turned on my computer and went to itunes and sure enough,i was billed.The date shows 28 december(today).So is there a fix to stop the app from prompting the signing in/password? I sent help requests to apple and pennypop(battlecamp publisher),any chance i will get refunded or be given my gold? P.S i was in the bedroom at the time of transaction and the internet was slow.
Thanks.

Start here
http://www.apple.com/support/itunes/contact/
and see what they can do to help you

Output routine fails but still output is issued....Urgent

Similar Messages

Maybe you are looking for