Output screen in Module pool

I am using 'call screen 1001' statement in my report. This is like my selection screen but is a module pool screen.
After pressing F8, execution and download takes place.
After that i want to output some statistics. Now if i set screen 0 and output some statistics with write statement, I am able to see output.
But on this screen when i press F3(Back), it goes to SE 38 initial screen or SAP easy access screen depending on whether its called through SE38 or through transaction.
I want to display screen 1001 again when i press back on output screen. Like when we press back on output screen it takes us to Selection screen in a report with selection screen.

Hi,
You could try ti call it with CALL SELECTION-SCREEN, to make it behave as a selection screen.
Or other option would be to display the statistics in another screen (or maybe with ALV) and program the correct screen flow with user-command..
Hope it helps,
MaryM

Similar Messages

  • Selection- screen in module pool

    hi all,
            how to create selection screen in module pool programing,
    in screen attributes of module pool, 4 screens are present, but selection screen radio button has been disabled.
    how to work by using selection screen radio button.
    Regards
    Suprith

    HI Suprith,
    You ll find a LAYOUT button on the application tool bar just click that button sceen painter sceen will be opend there you have to design your selection screen. Letf side of the sceen painter you see the options use the options as per your requiment and activate . If you  are using module pool program go to SE93 create the t-code and give the program name and the screen name which you have created in se51.
    hope this will help you...
    reward if useful
    regards,
    sunil kairam.

  • How to set the size of the screen in module pool.

    how to edit  the actual size of the screen in module pool  programing.

    Hi purshothaman,
    1. use the FM RPY_DYNPRO_READ
    2. Pass the programname and screen number
    3. We will get back various values in HEADER structure
        LINES
    COLUMNS
    regards,
    amit m.

  • Call report selection screen in module pool program with tab strip control

    Hi,
    Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
    Thanks
    Mano

    Hi,
    Refer std program:
    demo_sel_screen_in_tabstrip.
    demo_sel_screen_with_tabstrip.
    Call your program with SUBMIT stmt form module program.
    Reward points if this Helps.
    Manish

  • How to cal selection screen in module pool

    Hi abapers,
    I have to use selection screen in module pool programme..How to call selection screen in module pool.
    Regards,
    ramya

    YOU HAVE TO DEFINE YOUR SELECTION SCREEN LIKE THIS
    SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
      SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
                                          NO INTERVALS.
        SELECT-OPTIONS SEL1 FOR SY-SUBRC.
        PARAMETERS     PAR1 LIKE SPFLI-CARRID.
        SELECTION-SCREEN COMMENT /10(20) TEXT-COM.
      SELECTION-SCREEN END OF BLOCK BL1.
    SELECTION-SCREEN END OF SCREEN 123.
    SELECTION-SCREEN ULINE.
    SELECTION-SCREEN BEGIN OF SCREEN 99.
      SELECTION-SCREEN PUSHBUTTON 15(25) PUBU
                       USER-COMMAND US01.
      SELECT-OPTIONS SEL2 FOR SPFLI_WA-CONNID.
      PARAMETERS     PAR2 TYPE I.
    SELECTION-SCREEN END OF SCREEN 99.
    THEN YOU HAVE TO CALL THAT
    CALL SELECTION-SCREEN scr.
    AFTER THAT YOU CAN CALL THE ANOTHER SCREEN..
    CALL SCREEN..
    REGARDS
    SHIBA DUTTA

  • To get a pop up screen in Module pool

    Hi,
    Can any one tell me how to get a pop up screen while clicking a button in selection screen in module pool program.
    regards,
    Ruchika saini

    Hi Ruchika,
    This is the function module used in the program .
    CALL FUNCTION 'POPUP_TO_CONFIRM'
               EXPORTING
                    titlebar              = 'Question'
                    text_question         = 'Want delete records old table'
                    text_button_1         = 'YES'
                    text_button_2         = 'NO'
                    display_cancel_button = ' '
                    start_column          = 25
                    start_row             = 6
               IMPORTING
                    answer                = answer.
    Regards,
    Nihar Swain.

  • Tutorial for Screen programming & Module-Pool programming

    Hi Experts,
    I have no previous knowledge of Screen programming & Module-pool programming.
    Please provide me good tutorials on those so that I can master those in a couple of days as I need to use those in my current assignment.
    I require those badly.
    Rewards assured.
    Thanks.
    Anirban.
    Moderator message: please do not ask for documents or tutorials, search for available information, do not use terms that assign a higher priority to your issue compared to all others, do not promise rewards.
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    Edited by: Thomas Zloch on Nov 15, 2010 2:14 PM

    hai guru,
    use abapdocu----- tcode give ur keyword and search it.
    or
    sap technical .
    search in sap sdn ok.
    thanks.
    anji

  • Is it possible to print the current screen in Module pool program(Dynpro)?

    Is it possible to print the current screen in Module pool program(Dynpro)?
    I create a Module pool program , and customer hope can print the screen when they click print button, Is it possible?

    Does the customer want a screen shot or what? Please elaborate on your requirement.
    Maybe you should create a smartform first, which is called when one clicks on print button. But in fact, we need a bit more info than this.

  • Uploding sub screens in module pool programs

    HI,
       Can any one help in uploading sub screens in module pool program .
    Regards,
    Mahendra.

    Hi
    Debugging of module pool is same as reports, use /h or put breakpoint
    but u shud know what u want to check
    there are generally two event used in module pool
    PBO
    This event is used before displaying the screen,It is used to clear fields table, show table control, tabstrip and most important conditionally modify the scrren .
    PAI
    is used to validate the fields which are entered on the screen with database values and then fetch records from table.
    i mean all values to make available in internal table
    now u would be sure which part u want to debug.
    <REMOVED BY MODERATOR>
    Regards,
    Chandru
    Edited by: Alvaro Tejada Galindo on Feb 19, 2008 6:19 PM

  • Copying from report output to a module pool screen

    Hi to all experts
    My requirement is to call a transaction when i click a button in module pool programme .when i execute that transaction an alv report is displayed and user selects some records that should be copied over to the module pool screen.

    Yous should use ALV OOps concept to capture the selected data in the ALV report , and once you return back you can update yr module pool .

  • How to get center alignment of Input/Output field in Module Pool

    Hi Friends,
    I am using Input/Output field in my Module pool program. Dynamically i am submitting the text to Input/Output field. What i want is i want to display the submitted text as center. By default It is displaying left aligned.
    Thank U in advance.
    Mahender.

    Hi,
    Use syntax "Centered".
    take one variable push into the field
    write w_variable1 to w_variable2 centered.
    next push the varaible to Destination screen input/output Field .
    Make sure the Field the Character Type.
    Prabhud@s

  • How to get the cursor position from screen in module pool program

    Hi,
    I am doing the module pool program, I have one table control in one screen.
    I have to give functionality to the user that when the user enters first record in the table control and after filling the last field
    when he presses enter the cursor will have to come in the starting field of the second record.
    I know the logic , but i m bit confused.
    Can any body help me to solve this....
    thanks

    Hi,
    Check this code,
    Write it in the PBO
    MODULE SET_CURSOR_WERTKONTRAKT.
    MODULE SET_CURSOR_WERTKONTRAKT OUTPUT.
      PERFORM SET_CURSOR USING 'VBAP-ZWERT'.
    ENDMODULE.                 " SET_CURSOR_WERTKONTRAKT  OUTPUT
    FORM SET_CURSOR USING US_FELDNAME.
      DATA: DA_TFILL LIKE SY-TFILL.
      DESCRIBE TABLE IVBAP LINES DA_TFILL.
    FCODE 'Create Position':
    ==> Cursor to the first free line set to make the new position
    Can be created directly
        IF DA_TFILL EQ 0.
          SET CURSOR FIELD US_FELDNAME LINE 1.   -> set cursor position
        ELSE.
          SET CURSOR FIELD US_FELDNAME LINE 2.
        ENDIF.
    Product proposal actively
    Set ==> cursor in the first row
      IF DPP_ACTIVE   EQ CHARX AND
         XVBAP_UMFANG_OPV IS INITIAL.
    in the 'target volume' if available
        IF KOPGR_MIT_ZMENG CS TVAK-KOPGR.
            SET CURSOR FIELD 'VBAP-ZMENG' LINE 1.
            EXIT.
        ELSE.
    Else in the field 'Order quantity'
          SET CURSOR FIELD 'RV45A-KWMENG' LINE 1.
          EXIT.
        ENDIF.
      ENDIF.
    Hope it helps you,
    Regards,
    Abhijit G. Borkar

  • Checking Records in multiple screens using module pool programming

    Hi,
        I created student registration form using module pool programming.In first SCREEN i designed like the Below.
              Name:     <INPUT/OUTPUT Field>
             Emailid:    <INPUT/OUTPUT Field>
             Password:<INPUT/OUTPUT Field>
              CREATE<Push Button>    SIGNIN<Push Button>       cancel<Push Button>
    in  screen 1000 I created like the above screen and i wrote the code for it.It's successfully inserted records in ZSTUDENT database.
    BUT
        when i call the second screen 2000.I design the screen like below.And database table is ZSTU_LOGIN.
          username : <INPUT/OUTPUT Field>
         password  : <INPUT/OUTPUT Field>
             LOGIN<push Button>   EXIT<Push Button>
    AND i created Third screen 3000.Like full of detail of student details like First Name,Last Name,DOB,Education Details,Contact Details etc...
    BUT I'm facing the pbm is
                  whatever the record is stored in table ZSTUDENT-Name & password when i call the screen 2000 that USERNAME & PASSWORD are same
    Then go to THIRD screen 3000.BUT i wrote the code for second screen 2000 by using SELECT statement.without my code check it will go to third
    screen 3000 By the Statement of Call screen 3000.
    PLZ any one help me HOW to CHECK the Exact Record From second Screen 2000 to First Screen 1000.
    HOW to Check the code AND can u provide me any code available.
    thanks,
    Anusha

    Hi vikram,
        I wrote the code for screen 2000 like below.
    MODULE STATUS_2000 OUTPUT.
    *  SET PF-STATUS 'xxxxxxxx'.
    *  SET TITLEBAR 'xxx'.
       TABLES : ZSTUDENT_ENTER.
      TYPES: BEGIN OF ST_TAB1,
          USERNAME TYPE ZSTUDENT_ENTER-USERNAME,
         PASSWORD1 TYPE ZSTUDENT_ENTER-PASSWORD1,
         END OF ST_TAB1.
       DATA : W_TAB1 TYPE ZSTUDENT_ENTER.
       DATA : IT_TAB1 TYPE STANDARD TABLE OF ZSTUDENT_ENTER.
       DATA : USERNAME TYPE CHAR50,
             PASSWORD1 TYPE CHAR25.
    ENDMODULE.                 " STATUS_2000  OUTPUT
    *&      Module  USER_COMMAND_2000  INPUT
    *       text
    MODULE USER_COMMAND_2000 INPUT.
    CLEAR W_TAB1.
       MOVE-CORRESPONDING W_TAB TO W_TAB1.
    IF SY-SUBRC EQ 0.
       SELECT SINGLE MAILID PASSWORD
         INTO CORRESPONDING FIELDS OF W_TAB
           FROM ZSTUDENT_INFO
           WHERE USERNAME = W_TAB-MAILID AND
                PASSWORD1 = W_TAB-PASSWORD.
           CALL SCREEN 2000.
           ENDSELECT.
                 ELSEIF SY-SUBRC NE 0.
               MESSAGE 'INVALID USERNAME/PASSWORD'.
               ELSEIF SY-UCOMM = 'LOGIN'.
                 CALL SCREEN 3000.
                 ENDIF.
    ENDMODULE.                 " USER_COMMAND_2000  INPUT
    But i could not found whether code is write or not.
    syntax error is USERNAME is Unknown.
    could solve me my pbm anybody.....
    Thanks,
    Anusha

  • Regarding selection-screen in module pool

    hi
    experts,
    i am having doubt in module pool programing...
      i want create selection screen(pop screen with field)  in modulepool., before the display screeen deatils
    ex :   if i want display the   record   details  for  that particular
    record number.......
    while  i am click on display..
      pop-up-selection screen will come  with record number field..
    i f enter the record no, display s the  details...
    Ananand

    Please see Rich's answer here:
    [Dialog programming - How to place a select-option field in a dialog screen;
    Rob

  • Screen Programming(Module Pool ) using Abap Objects

    Hi gurus.,
    I need to create a module pool program with tabstrips and tablecontrols using Abap objects...plz guide me how i can achieve this... i am very much confused.. i dont know how and where to start .. plz send me documents and sample codes related to this topic..Also hoe i can implement f4 help in screen fields..
    Regards.,
    S.Sivakumar

    Hi Sivakumar,
    Go through the following links:
    [url]http://www.savefile.com/download/156691?PHPSESSID=c49d6bed6630d830f3270f7eab51e547 [url]
    [url]http://www.sapdb.info/category/sap-ebooks[url]
    [url]http://sap.niraj.tripod.com/id25.html[url]
    [url]http://abaplovers.blogspot.com/2008/03/sap-abap-tutorial-module-pool_17.html[url]
    Thank you,
    Prasad G.V.K
    Edited by: Craig Cmehil on Jul 1, 2008 9:48 PM

Maybe you are looking for

  • I receive a text from someone but it has an e-mail address at top of message. When I reply and send , it gets returned. Why? and how was original message sent?

    I have downloaded I-Cloud and the new ios program. Where do my text go through now if they don't show up on my bill in the data usage section? When I get a text from friends sometime their e-mail address shows at the top of the message instead of the

  • Checking no of records in a cube.

    Hi All, I am trying to check the number of records in a cube. I tried two ways . 1) Using listcube -> rowcount -> total 2) RSA1 -> Manage -> Count no of records for each request. I am getting different result for both . Can anyone help me on this? Re

  • File to multiple idoc issue

    Hi All, My issue is that the size of the file is huge . so maybe at one fil we might have 50 K idocs in one file. I got through the First step where the file got processed and 50000 record data got divided into on 50000 idocs. But when its is posting

  • Issue Installing Slipstreamed Acrobat (Pro & Standard)

    Good Afternoon - A few days ago, I slipstreamed both (Pro & Standard) of our Acrobat X installation files for deployment with SCCM.  After deployment failed, I looked up things in the event log, researched solutions, and slipstreamed again.  Still...

  • Cannot listen event

    I found that if I have some time consuming tasks performed in one handler. Another event cannot be listened. public function eventhandler1(event:event1):void time consuming tasks public function eventhandler2(event:event2):void sth actions If event1