Output Sharpening for Screen Still Not Sharpening?

There's obvious sharpening differences for matte and glossy, high and low, but when I export JPG for screen, using Lightroom 2.4, PS2 shows no difference between the two layers using difference blend mode.
John Gregson

I just tested it and it appears to work normally now although the difference is still a little too subtle for my taste. You should use Apply Image in Photoshop and set it to substract to really see it. Then you use a levels adjustment layer to see the differences. I see a very clear difference in sharpening. In 2.3 there used to be no difference whatsoever between standard and high. Below is the result for substracting a high output sharpened image (screen) minus a standard output sharpening followed by a levels operation at 100 and 149. Clearly the high sharpening sharpens more than the standard.

Similar Messages

Navigation for screen is not supported

Dear experts,
I am translating a screen and i can see the changes on this system from every clients. but when i want to transport changes to target sistem i am creating a request from se38 with report RS_LXE_RECORD_TORDER. then i am assigning what it wants, when i am looking from se01 to my trasport of changes request there are object list. but if i am clicking twice on it the status message is "navigation for screen is not supported". after transport i can't see the changes on target sistem. how can i solve this problem?
Thanks

No cross posting
Read the "Rules of Engagement"
Regards
Juan

Output type for ORDCHG is not created in PO

Hi,
We have a problem for the output type autogeneration when a PO is changed (ORDCHG).
The scenario is the next:
- We have a Z output type for the creation of the PO. It works fine (the outputy type is generted and the idoc sent)
- We have another Z output type (ZCG3) for th PO change. The output type is not generated automatically whe you change the quantity for example. The strange thing is that if you create the output type manually and you send the idoc and later you change again the PO, now the output type is generated automatically. So it is like it is necessary a previous output type ZCG3.
Do you know where could be the problem?
We have the condition records as the other output type. Also we have marked Multiple issuing and in WE20 we have 2 entries for message ORDCHG in message control (one entry with change message flag marked and the other one without to mark).
Thank you in advance,
Manel

check the "MULTIPLE ISSUING" option in NACE.
NACE -> Select Application EF -> Click on Output types -> Select output type -> Click on Details Button -> Go to General Tab -> Select Multiple Issuing option
Regards
Vinod
Edited by: Vinod Kumar on May 3, 2010 4:43 PM

Output Type for Deleting Delivery Notes completely

Hello,
I've a problem that in case of complete deletion of a delivery note I want to get message of deletion via IDOC DELVRY05. Normally the complete document will be deleted without any outbut determination.
Where do I have to implement this? Is it in normal output determination for outbound deliveries?
Thank you for your effort.
Kind Regards
Norbert

*

Loaded OS 4.5 Link for email still not highlighted 8330 sprint

OS 4.5 Is loaded on my BB but my Link from my e-mail is still not highlighted so I can open it.... Please help Yes I did take my battery out
Solved!
Go to Solution.

Hi,
Okay first, stay in one thread, go back and resolve the other one. OK?
Try this:
GO TO OPTIONS/ADVANCED OPTIONS/HOST ROUTING TABLES/menu key REGISTER NOW
You will an activation email when complete, this refreshes the tables.
I would then login to the BIS site to send service books. When complete
you will get an activation email per account.
If you want to use the BIS site via PC send me the carrier and I'll send you the site.
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Javadoc for NW2004s Still Not Available

Hello,
I would like to ask why is the javadoc for NetWeaver 2004s still not available?
The SPS07 (which was promised to be the oficially first version released globally) was published some month ago. The sneak preview is also free for download for some time.
But the installations of both released versions do not contain the javadoc.
There is some javadoc for older libraries included in NWDS help; but there is no javadoc for newer components like CAF/GP. And all references to javadoc point to a page on SDN mentioning that NW2004s javadoc is not released yet.
Why you keep the NW2004s javadoc hidden from the developers' eyes? What is so secret in it?
We need the javadoc! Please publish it!
Thanks in forward!
Regards
Tomas Kuba
System Architect
LogicaCMG CEE

The Javadoc for NW2004s is now available. See https://www.sdn.sap.com/irj/sdn/javadocs

Skype for android still not working

Since nearly to months now skype for android is not working on my phone. Reinstalling and uninstalling and then reinstalling does not help. Erasing and cleaning up eather.
It seems that the skype account is not being accepted on the phone . any sugestions?
Greetings

Long hold on the Skype installation item in the Store application and select "Cancel". Then move to your phone's application list, find Skype there and select "Uninstall".
After that reboot your phone and install from the Store again.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

After i made update to ios system the auto brightness for screen is not working any more although i am turning it on

Before i make update the auto brightness was working properly
The screen was very low bright in the dark automatically and high bright in light
But now after i made update it is nit working
I am surprised that apple system is not stable
Please support
<Email Edited By Host>

This is a user to user support forum and not Apple employees so it is best to not post your email address in an open discussion group.
Have you tried a reboot of the iPhone? Hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.
My iPhone went to full brightness all the time after updating to iOS 6.1.3. A reboot seems to have helped make it work as it should. Also check Settings > Brightness and Wallpaper and see how it is set, reduce the brightness level it is too bright for you.

10.0.2 reader for Windows still not available

hi - over 6 hours after the security bulletin was released there is still no 10.0.2 reader for Windows available - please could Adobe advise when this will be online?
I'm looking at both of these locations and 10.0.1 is the latest...
http://www.adobe.com/support/downloads/new.jsp
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/

The advisory makes perfect sense - you're getting mixed up between "Adobe Reader" and "Adobe Acrobat".
Acrobat X users on Windows and Mac should update to 10.0.2 now. The patch is deployed, use "check for updates" to download it.
Adobe Reader X users on Mac should update to 10.0.2 now. The patch is deployed, use "check for updates" to download it or click here.
Adobe Reader X users on Windows should use Protected Mode, which will remove any threat until the quarterly cycle patch in June.
Adobe Acrobat and Adobe Reader 9.4.2 users should update to 9.4.3 now. The patch is deployed, use "check for updates" to download it.
If users have disabled Protected Mode for specific reasons, this is done at their own risk. Adobe does not recommend disabling Protected Mode except for closed environments where third-party tools are unsupported and the safety of PDF files opened by Adobe Reader can be warranted by other means.
The advisory released yesterday is very poorly written. The first
half of the second paragraph specifically recommends users update to
10.0.2 and 9.4.3 to mitigate the vulnerability:
Adobe
recommends users of Adobe Reader X (10.0.1) for Macintosh update to
Adobe Reader X (10.0.2). For users of Adobe Reader 9.4.2 for Windows and
Macintosh, Adobe has made available the update, Adobe Reader 9.4.3.
Adobe recommends users of Adobe Acrobat X (10.0.1) for Windows and
Macintosh update to Adobe Acrobat X (10.0.2). Adobe recommends users of
Adobe Acrobat 9.4.2 for Windows and Macintosh update to Adobe Acrobat
9.4.3.
Only at the end of the paragraph does it mention that the update will not be made available until June for 10.0.1.

Output form for Customer Credit Note - FB75

Dear Expert,
my client has demanded a Form Output in T-Code FB75 - Customer Credit Note.
we are ready with Logic & format of the Credit Note to the ABAPer.
Need your help :
1. From where & how do we activate form for this T-Code
2. Print a form once we finish a posting to Customer Credit Note in FB75

You have to develop a Z Transaction for the FORM developed in Transaction Code SE93
Regards
Sanil Bhandari

Output type for V2 does not show up in Vl02n

Hello all,
I have following problem:
in transaction NACE, I have marked V2 (Shipping) and clicked on the output type button to create a new output type. I've created the output type with all parameters required.
But now, when I go to Vl02n - Extras - Delivery Output - Header, I get the error message: output type does not exist, when I enter my output type.
What I am doing wrong?
Thanks
Anne

You need to maintain
1) Output types
with Processing routines with the medium and program etc (You must have already done that)
2) Add newly created output type in the respective procedure.
3) Check right access sequence is used if you want to maintain condition record.
4) Maintain the condition record for this output.
Please check onece again your settings.

Smartforms: Output Options for Field Contents not working within table

Hello,
to display an amount and its unit I am using &GS_MM_IT_GEN-MENGE(R)& &GS_MM_IT_GEN-MEINS& with a line of a table. Unfortunatly it seams that the output option "R" (right-justified) is not working with the table context. Has anyone an idea, what to do?
Thanx,
Peter

Dear all,
thank you for your suggestions. I have found out, that the output option work pretty well as described in the documentation. The are output options of a field and not of a column! To get a right justified column, I had to change the attribute of the parapraph assigned to the column.
Regards
Peter

Recomended output settings for screen recordings

I am fairly new at this and all of the options for outputs, inuts, codecs and the like are bit overwelming. I was wondering if anyoen could share me me some of their seetings that they use for the output of video for the web. I will be outputting at 880 X 660 if that metters.
Many thanks,
Houston

Here is the (perfectly working) code that this resulted in:
/// <summary>
/// Using the export function (instead of hard-to-understand-output-script in the SaveForWeb function below)
/// We have not yet found a way to respect the output setting (regarding) åäö in saving files tab of the flyout-menu
/// in Save for web and devices (no matter using the export function or the old "script" way).
/// Currently using a workaround, by setting the final name AFTER that the file has been exported.
/// </summary>
/// <param name="docRef">The document to export</param>
/// <param name="filePath">The path to the file to write</param>
/// <param name="percentage">Jpeg compression in percent</param>
private void SaveJpegForWebUsingExport(dynamic docRef, string filePath, int percentage)
    // Begin with deleting the destination image if it already existed on disk.
    if (System.IO.File.Exists(filePath))
        System.IO.File.Delete(filePath);
    //var options = new ExportOptionsSaveForWeb;
    dynamic options = Activator.CreateInstance(Type.GetTypeFromProgID("Photoshop.ExportOptionsSaveForWeb"));
    options.quality = percentage;
    options.format = 6; // JPEG = 6 (according to Object Model Viewer i Extenscript Toolkit) .Type.GetTypeFromProgID("SaveDocumentType.JPEG");   // Save Format for the file
    var mockupValidFilePath = System.IO.Directory.GetParent(filePath).FullName + "\\tempfile.jpg";
    // dynamic exportType = Type.GetTypeFromProgID("ExportType.SAVEFORWEB"); fungerar inte
    // ExportType.SAVEFORWEB = 2 (according to Object Model Viewe in Extenscript Toolkit)
    docRef.Export(mockupValidFilePath, 2, options);
    // Since "Save for web and devices" (export document) renders unpredictable results,
    // neglecting the output settings, we rename the file after it has been exported.
    System.IO.File.Move(mockupValidFilePath, filePath);

Output Medium for SRM PO not saved

Hi Gurus,
We just upgraded the landscapes with the recent servicepack level. We are using SRM 5.0 Extended classic on SP level 15.
The issue now is when PO is ordered for first time, output medium defaults to what ever the config setting has. It was not necessary to select output medium(Printer/fax/email).
But when PO is changed(not necessarily change PO data) and either check/order is selected, message 'No output medium identified' is thrown.
If you select any one of the output medium and then do the check/order, PO is processed/ordered. I am not sure if the output medium settings are not saved or being overridden during PO change. Please advise.
thanks
Rao.

Hi Rao
some thing makes default medium as spaces.
Note 1072367 - No output medium identified error even if medium selected.
A Purchase Order is created with a vendor containing no default medium specified in the vendor master data. Now, even after selecting a valid output medium, the error message 'No output medium selected' does not go off
check with technical resource ? is it really internally makes SPACES (empty)
check any logic in your smartform.
if yu have time create one OSS mesaage too.
muthu

Output Message for Purchase order not being created Automatically

Hi all,
I created a Condition type for Purchase order in MN04 with key combination "Doc.Type/Purch.Org/Vendor". The problem arises when i delete this condition record. After deletion when i create purchase order in me21n for that condition type, the system gives an error.
Message no. 06261 - No message generated for output of purchasing document.
Is there anyway the purchase order message is created automatically again when its condition type has been deleted from MN04.
- Regards
Sahar Khalid

Before creating the entry in MN04 the message was being created automatically. I want the system to create the same output message as it was creating before the creation of the entry in MN04.

Output Sharpening for Screen Still Not Sharpening?

Similar Messages

Maybe you are looking for