Output.systems

I have a screen that comes up and freezes my system on my Mac Mini.
It starts with OUTPUT.SYSTEMS and trys to redirect me to another website. It also has an 800 number to call.
Please help!!!!

This is spam/scam adware. Quit Safari, then relaunch it while holding down the SHIFT key. This should prevent Safari from re-opening the window.
Remove Adware and Pop-ups
The Safe Mac » Adware Removal Guide
AdwareMedic
Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support

Similar Messages

How do I get rid of output.systems pop up and halt Safari?

When I open Safari it goes to output.systems and a pop up window appears with what I consider an ad to call 1--866-560-5093 to get assistance. I can't browse with Safari. How do I fix the problem. I refuse to call a ph. number to get rid of the pop up with the ph. number in it.   I can't access Safari Preferences to turn off extensions.   I'm using iMac 3.06 GHz, 12 GB, 999 GB HD, OS X Yosemite 10.10.2.    I'm assuming I need to take all Safari software off and reinstall. Please advise what you suggest to do.

This is a scam, please don't call the number.
1. Force Quit .
    Press command + option + esc keys together at the same time. Wait.
    When Force Quit window appears, select Safari if not already.
    Press Force Quit button at the bottom of the window.   Wait.
    Safari will quit.
2. Relaunch Safari holding the shift key down.
3. Turn off wifi and turn it back on.
    Turn off Wifi. Click Wifi icon in the menu bar and select “Turn Wifi off”.
    Visit another website.
    You won’t have internet connection.
    Turn on Wifi. Click Wifi icon in the menu bar and select “Turn Wifi on”.
    Select your Network.
4. Safari > Preferences > Security > Privacy
    Cookies and website data:
    Click “Details” button.
    Remove the cookie related to this, if there is one.

Outputting System User Name in Ad Hoc Query (S_PH0_48000513)

I am trying to create an HR Ad Hoc Query and one of the fields that I am trying to output is System User Name from infotype 0105 Communications. If I choose this field and do not choose the Communication Type, I get two records per employee - one record with the System User Name populated and one record with a blank value for System User Name.
If I choose the System User Name field for output and also make a selection on Communication Type (= subtype 0001), employees with no System User Name (i.e. no Infotype 0105, subtype 0001) are eliminated from the report.
I want the report to show all selected employees, including those without a System User Name; however, I do not want the same employee to appear on the report twice.
Has anyone else experience this problem? If so, have you figured out how to eliminate the extraneous record for each employee when you do not select the Communication Type?
Thanks in advance.

Hi,
Love to know if you managed to find a solution for this issue as I'm experiencing the same problem. However I'm reporting on both system user and email address which are distinct fields and would prefer to see this information only on a single line. With my report I get communication system user on one line and then email address on the another, I'd also like to be able to include those users where the info types have not been maintained.
With the query I have created I also included logon data from the USR02 table.
Cheers
Bill

Message output systems

Hi Gurus,
I am a Functional Consultant and do not know much about the ABAP. I am making a Functional specification for the change Message out put which is for Remittance advise for the Vendors. I read few of the Threads an I am sure now I can get some help here.
The scenarios is that the ERS (auto MIRO or invoice generation) is done with the help of self billing (automated). This has 7 different steps in which it calculated and the creats and invoice document. I have tried to view the program and at the end it has RSNAST00 program.
Now I am a bit confused here as there is another custom program "ZPMWO_SBHS_MESSAGE_NAST" i went through the code for this and I think this program is to fetch the data that is to be populated in the Smart forms as at some point in the program the smart forms are called and populated with Data.
As this whole thing is confusing to me My basic question is whats the role of RSNAST00 when data is fetched by the Custom program. Is it thats the custom program is getting the data and populating the Smart form and then creating the message and RSNAST00 is then Checking the NAST table for the unprocessed messages and picking up unprocessed messages and send to the respective vendors.
Can anyone please explain me the purpose of RSNAST00 and how it can be used and if the above scenario makes sence or not?
thanks in advance
Anoop Sharma

Yes you are right. RSNAST00 is a generic program.
The program that actually extracts the data is setup in NACE for that output type's processing routines.
Here you will usually see the following :
1. Medium ( 1, 5, etc..)
2. Short text (Print , Fax etc)
2. Name of the program that the system calls up to process the output.
3. The subroutine within that program.
4. Form name if applicable .
5. Smart form name is applicable.
Example :
For output type ERS of application MR, I have the following processing routine :
Medium Short text Program Form routine Form
1 Print output RM08NAST ENTRY_ERS ZF_AP_SBINVOICE
So subroutine ENTRY_ERS of program RM08NAST is responsible to extract the data and write the form.
You can refer to the documentation of NACE t.code for further details.
Also note that you can assign custom program and custom form name too in the processing routine.
regards,
Advait
Edited by: Advait Gode on Feb 13, 2009 2:14 PM

Urgent!! running system command in java

i am trying to run system command(windows) in java. I am getting
exception as java.io.IOException: CreateProcess: c:\dir
Please Help.
Here is the code
import java.io.*;
public class RunCommand {
public static void main(String[] args) {
try
//run dir command
Process p = Runtime.getRuntime().exec("c:\\dir");
BufferedReader stdInput=new BufferedReader(new
InputStreamReader(p.getInputStream()));
BufferedReader stdError =new BufferedReader(new
InputStreamReader(p.getErrorStream()));
//read the output
System.out.println("here is the output:\n");
while((s=stdInput.readLine())!=null){
System.out.println(s);
System.out.println("here is the error if any");
while((s=stdError.readLine())!=null){
System.out.println(s);
System.exit(0);
}//end try
catch (IOException e)
System.out.println("exception Happened" );
e.printStackTrace();
System.exit(-1);

It works fine if you replaceProcess p = Runtime.getRuntime().exec("c:\\dir");withProcess p = Runtime.getRuntime().exec("cmd /c dir");And don't forget to define your s variable.

How do I use the USB port on my MBP for audio output

I am a fairly new commercial sound provider running live sound and the occassional itunes type playback at events. I currently use a Y cable from the headphone output of my MBP osX into the RCA inputs on my audio mixer. On an older HP laptop I was able to use a USB output into the USB input of the mixer and the sound was a lot better in quality. I wish to do the same using the new MBP but when I plugged into the right side USB port I received no audio output. What am I doing wrong? Thanks howardfrom nh.

Have you gone into the Sound/Output system preferences to see if your mixer shows up there as a valid output device and if it does selected it there? If it doesn't appear, have you confirmed with the manufacturer of your mixer that it is compatible with Macs and if so asked if there are any drivers you need to install?
Regards.

Audio output device same for all users Yosemite

I use more then one account on my recent Macbook Pro. For the first account I like to have the audio output set to the speakers but for the other account I want the audio output set to the headphones.
With Mavericks the Macbook remembered the last audio settings for each user account.
With Yosemite any changes to the audio settings (input, output,system sound, etc.) on one account affects the audio setting on other the user account.
I tried various audio settings to see if it affected them all. It seems to.
I tried seeing if it happened only when the users accounts were logged in or it was different on boot etc. It seems to always change the settings for all users no matter what.
I tried resetting the PRAM but that did not solve it.
I tried a 3rd party program called AudiSwitcher from the App store to see if this could help but no luck.
I searched here and more widely to see if anyone else was reporting this and found one other person who seemed to mention the same problem and they concluded "I did some tests and came to the conclusion that the system now does not remember settings for each user, and applies the current setting of audio output for all accounts."
Curious to know:
     a) Does this affect other people? If not, I'll look for conflicting apps on my computer.
     b) Is this intended behavior or should I look for a way to report it as a bug?
     c) And most importantly if there is a way around it?
Thanks!

I'm also have the same problem. I tested it on fresh Yosemite installation without any additional software. Your mentioned my conclusion about tests.

SmartForm - Output could not be issued,Message no. VL086

Hi , i had create a smart form for the DO and it is working when i try to view it through the function. However, when i want to try it through issue the Delivery Output, system throw error , "Output could not be issued,Message no. VL086"
Please kindly advise.
thank you

Hi,
Pls check if it helps
VL086: Output cannot be issued
Siraj

Executing system command in java

I am trying to set ORACLE_SID value from java application.
when i echo $ORACLE_SID it shows me the old sid value
please help
my code --->
import java.util.*;
import java.lang.*;
import java.io.*;
public class runSysCommand{
     public static void main(String args[]){
     String osName=System.getProperty("os.name");
     System.out.println("the OS name is :" +osName);
     String s=null;
     String[] cmds = {"/bin/ksh","-c","export ORACLE_SID=pd3"};
try
Process p = Runtime.getRuntime().exec(cmds);
BufferedReader stdInput=new BufferedReader(new
InputStreamReader(p.getInputStream()));
BufferedReader stdError =new BufferedReader(new
InputStreamReader(p.getErrorStream()));
//read the output
System.out.println("here is the op:\n");
while((s=stdInput.readLine())!=null){
System.out.println(s);
System.out.println("here is the error if any");
while((s=stdError.readLine())!=null){
System.out.println(s);
System.out.println("the OS name is :" +osName);
System.exit(0);
}//end try
catch (IOException e)
System.out.println("exception Happened" );
e.printStackTrace();
System.exit(-1);
}

When you execute "/bin/ksh," you get a new shell - with a new environment. When you close the shell, it's environment (and any changes) go away. What you will need to do is write a shell script that takes the value as a parameter - the script then sets the environment and runs whatever other program you want to specify. When the script exists, the environment will also disappear.

Output type determination in Billing document

Hi,
I have a query reg automatic determination of output type in the billing document. The scenario is, For an invoice, two output types are determined automatically for all invoices. But the third output type is determined based on Shipping point. For Example say, output type IFIB should be determined if Sh.pt is A and IFIT if sh.pt is B. This is controlled thru "Requirement" assigned to the output types in output det procedure.
The problem is, for a particular document IFIB appears though the sh.pt is B, Now i have to find out whether it is determined automatically or manually. I have checked the following
1. The "manually changed" field is not flagged in the "further data" of this output type. I believe, if it is not ticked, then the output type is determined automatically and no manual change was carried out. Am I right?
2. When i checked the "determination analysis", I find that the output type with the message "Output ignored (Requirement not fulfilled)". If the output was determined automatically, then "output xxx found" should appear right? When the analysis says it is ignored, then how come it can appear automatically?
I am confused over this contradictory findings. Plz tell me whether my assumptions stated above are right. Kindly suggest me alternative ways to find out whether it is determined automatically or manually? If it is determined automatically, on what conditions?
Thanks in advance
Suresh

Hi Suresh,
In an output determination, it may tell u that the output type is ignored because of un-fulfilled requirement, but it will still automatically appear in Header-> output, but u need to check the actuall processing status, whether is 0,1, or 2. I assume for your case it will be 0 (not processed, meant for manual processing instead), 1 (processed) and 2 (error occurred).
Another thing which is essential is that, in order to let the system successfully fulfill your determination criteria, u need to assign output type with correct access sequence, for example 1 access sequence by sales org/billing type for output, another 1 is by sales org/shipping point. Or u can simply create 1 access sequence with 2 condition tables.
After that u need to create condition record for each output type, u do this in t-code VV31.
By rite, during transaction (issue output), system will be able to search for those condition record and output type will be automatically appear, providing if there is any rquirement routine in your output det. proc (appl = V3) returns TRUE.
Cheers,
Benny Andre

System error 86 while mapping c$

Hi, thanks for your time. I'm having the next issue:
I work on a domain network. Usually, we image computers and then join them to a domain.
However, i find it impossible to do anything to an unjoined computer because i get system error 86. Im trying to map c$ from my computer (which is in a domain) with the local administrator credentials from the other computer. The command goes like this:
net use k: \\ipaddress\c$ password /u:localadmin
output:
System error 86 has occurred.
The specified network password is not correct
I have checked many times the local administrator password and im typing it right, i have disabled the firewall, i have run all the services on the computer, and enabled netbios. Nothing works.
The problem is not exactly trying to map c$, i have noticed that once i'm able to map this drive, i can also connect to WMI on this machine from a remote computer. The objective of this is that i'm trying to run a couple of powershell scrits that involve
getting a wmi-object from a remote computer (this doesnt work either because i get ACCESS_DENIED using local admin credentials from the machine im trying to access.).
Im doing this from a Win7 machine to a XP machine. I've tried XP to XP but it doesnt work either.
gustavo morales IT department - Desktop Support

OK, I had this problem this morning, and I couldn't find a good answer, including this thread. I'm hoping that giving a thorough answer will help others.
scenario:
You have a computer in a domain (like your work computer). you would like to connect to a workgroup computer and see its files (like your home computer). you cannot browse to the computer and if you try to map the network path you get "system error 86" or system
error 1326". (To map the network path you may try NET USE \\computername\path password /USER:computername\username)
resolution:
To troubleshoot this please try to setup the ideal setup first. Once you have it going you can change to settings you like:
1. disable the workgroup/home computers firewall
you need to do this since both file sharing and kerberos can be stopped by the firewall
2. turn on file sharing on the workgroup/home computer on the network card used
3. create an administrator account on the workgroup/home computer that has the same username AND password as your domain useraccount on the domain computer
4. on your workgroup/home computer, start local security policies secpol.msc and turn on
a) local policies:audit policy: audit account login events: failure
b) security options: Network security: LAN Manager authentication level: Send LM & NTLM - use NTLMv2 session security if negotiated
c) network access:sharing and security model for local accounts : Classic
5. Make sure both computer clocks are showing correctly
Hope this helps

Errors in the output/result..

I tried to compile the program that should display the following side by side_:
Miles           Kilometers          Kilometers           Miles
1               1.609               201                  124.922
2               3.218               202                  125.544
3               4.827               203                  126.165
4               6.436               204                  126.787
5               8.045               205                  127.408However, the wrong output is shown as below:
Miles           Kilometers          Kilometers           Miles
1               1.609               201                  124.922
1               1.609               202                  125.544
1               1.609               203                  126.165
1               1.609               204                  126.787
1               1.609               205                  127.408
2               3.218               201                  124.922
2               3.218               202                  125.544
2               3.218               203                  126.165
2               3.218               204                  126.787
2               3.218               205                  127.408
3               4.827               201                  124.922
3               4.827               202                  125.544
3               4.827               203                  126.165
3               4.827               204                  126.787
3               8.045               205                  127.408
4               6.436               201                  124.922
4               6.436               202                  125.544
4               6.436               203                  126.165
4               6.436               204                  126.787
4               6.436               205                  127.408
5               8.045               201                  124.922
5               8.045               202                  125.544
5               8.045               203                  126.165
5               8.045               204                  126.787
5               8.045               205                  127.408I need your help to check and correct the mistakes. Thanks a lot.
What I compiled the program is shown as below:
import java.util.Scanner;
public class TwinConvTable
   public static void main(String[] args)
      //display the names
      System.out.println("Miles\tKilometers\t\tKilometers\tMiles");
      for (int m=1; m<=5; m++)
      for (int km=201; km<=205; km++)
         //display the output
         System.out.println(m + "\t\t" + (m*1.609) + "\t\t\t" + km + "\t\t" + (km/1.609));
   }//end of main
}//end of Twin1 classNote:
km = (m*1.609)
m = (km/1.609)
Edited by: soulhealer88 on May 25, 2008 12:01 PM
Edited by: soulhealer88 on May 25, 2008 12:09 PM

Sorry for replying late.
I realised that I forgot to use the brackets { } to close the loop body.
Thanks a lot for helping and correcting.
**Readers, I wonder whether you want to use the program compilation. Here is below:
public class TwinConvTable
     public static void main(String[] args)
          //display the names
          System.out.println("Miles\tKilometers\t\tKilometers\tMiles");
          int miles=0;
          for (int kilometers=201; kilometers<=205; kilometers++)
          //loop body
               miles++;
               //display the output
               System.out.printf(miles + "\t\t" + (miles*1.609) + "\t\t\t" + kilometers + "\t\t" + "%.3f\n",(kilometers/1.609));
          }//end of for loop
     }//end of main
}//end of TwinConvTable classEdited by: soulhealer88 on May 25, 2008 11:08 PM

No digital output OSX.8.3

I cannot get digital optical output in OSX.8.3 to work. I t is listed as an option in the system forlder, sound, but does not connect when I select it. I have four otions in the output system preferences: Stereo Line-out (rear Green)- this one works with the three plugs-tellow, black,white. The other options are as follows and none of them work: Stereo Headphones (front Green); Digital SPDIF-Out (CD); Digital SPDIF-Out (rear Orange). I am running the sound through a Logitech Z5500. Works with Windows 7 when connecting with digital optical and the LG TV that I have also works with digital optical through the Logitech system. So I know it is not the Logitech system problem. It is the MAC OS. Any suggestions to get this digital Optical output to work in OSX.8.3?

Exactly which computer is this?
MtD

How to get Variable name in output (Report Writer/Painter)

Hello Experts,
We have maintained one Repot by using Report Writer, this is the report for Cost center (periodic report), input fields are Fiscal year, Period and Cost Center. In out put system will display the selected cost center balances for individual cost element.
Output: Excel format: in first sheet it will display balance of the total cost centers selected and from second sheet it will display individual cost center balances.
My requirement is in the output system is displaying sheet name as CC1,CC2,CC3.......CC50, but my user want to display this as Cost Center 1, Cost Center 2, Cost Center 3...... like this. we have maintained variable name as Cost center 1, cost center 2....., but why system is displaying as CC1,CC2,.... .
Please help me how to get the full description as sheet name in excel.
Thanks ......Sudheer

Hello Everybody,
Please help me how to get variable name in Report Painter outout ( Excel format ).
Thanks

Pausing the output stream?

Ahh! Sorry bout that... stupid friend.
Anyway. I have a question. Is there a way to pause the output in a series of System.out.println commands?
Like I'm making a game with a friend and its all text based using the java console and... It would be very confusing if all this text popped up at once!
Something like...
System.out.println("Hello!")
//pauses
System.out.println("Nice to meet you!")
or perhaps a way to wait for the user to press a key to continue. That would actually be better :3
I tried searching in the java api but got lost XD. I'm new to java. thanks for reading and helping me if you can.
Edited by: Xanotros on Aug 2, 2008 11:46 AM

if you want to wait for user input you can use a method like this to pring to the console:
String printAndWait(String output) {
     System.out.println(output);
     BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
     try {
          return in.readLine();
     catch (Exception e) {
          return null;
}you can also try to get the current running thread and make it go to sleep, but i dont think that its a good idea.

Output.systems

Similar Messages

Maybe you are looking for