Output Tax Code In Purchase Order

Hi all,
It's possible to assign an output tax code to a purchase order?
The system gives me the error message 6164 'Please enter an input tax code, not an output tax code' when I use an output tax . Is there any customization to allow output taxes in purchase orders?
Thank you,
RS

Dear friend...
You cannot use output tax code in purchase order, since output tax codes are used only for sales. If you use output tax code in the PO it will obviously throw the error you said. If you want to have the taxes as shown in the output taxes, if not present in your input tax codes, you can create new tax code which you desire. Output codes are only for the Sales Order.
Hope it helps re-ward if so
Suraj

Similar Messages

How Create new Tax code in Purchase order

Dear Sir,
I have creat new tax code in Purchase order
Basic value          3976876.53
Ex Duty          10%     397687.6525
edu.cess          2%     7953.75305
s&h Edu.cess     1%     3976.876525
Toatal               4386494.81
CST          1%     43864.94807
Addition                12550.00
i have all ready tax code 1021+5vat

Hi Sneha Patel
Case1:
If tax is applicable on the freight charges then create a Z condition in (Tocde M/06) and assign it in ur pricing procedure (Tocde M/08) before the net value is calculated in ur pricing procedure so that it is taken for tax calculation.
Case2:
If tax is not applicable on the freight charges then create a Z condition in (Tocde M/06) and assign it in ur pricing procedure (Tocde M/08) after the net value is calculated in ur pricing procedure so that it is not taken for tax calculation.
For both the conditions select
Cond. class   A Discount or surcharge
Calculat.type B Fixed amount
Cond.category B Delivery costs
Also mark as a header or item condition with accruals checked.
If u are not sure then copy FRA1 condition in STD and change Calculat.type as B Fixed amount instead of % in FRA1 so that u can enter the amount directly in PO.
Also mark these conditions as manual in ur pricing procedure so that these can be entered manuall in PO if reqd.
While creating PO u can select the reqd condition (with or without tax) under conditions tab and enter the amount.
hope it clears ur issue
Chk and revert
Reg
Raja

BAPI for updating tax code for purchase order..

Hi friends,
I have one requirement to change tax code for multiple Purchase order but the
thing is they should not go for release.So what should I prefer BDC or BAPI.
I am thinking to implement it through BAPI, but I don't know what procedure to follow.
If somebody can provide me a small guiding steps or code then it will be very helpful for me..
Thnaks in advance..
Useful answers will be rewarded with points....
Regards,
Rajesh Akarte

Hi Friend,
BAPI_ACC_PURCHASE_ORDER_CHECK Accounting: Check Purchase Order
BAPI_ACC_PURCHASE_ORDER_POST   Accounting: Post Purchase Order
MEWP                           BAPIs Purchase order
BAPI_PO_CREATE                 Create Purchase Order
BAPI_PO_GETDETAIL              Display Purchase Order Details
BAPI_PO_GETITEMS               List Purchase Order Items
BAPI_PO_GETITEMSREL            List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO             Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_GET_LIST               List Purchase Orders - Only up to 4.0A
BAPI_PROCOPERATION_GETCATALOGS Determine Valid Catalogs as Value Help
BAPI_PROCOPERATION_GETINFO     Analysis of Objects to be Generated in Purchasing
<b>AND</b>
Use condition type NAVS with access sequence 0003 to default the taxcode in the purchase order item using conditions. Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level. Search for the transaction ME21.Double click on ME21. Then search for TaxCode
Use condition type NAVS with access sequence 0003 to default the taxcode in the purchase order item using conditions.
A2: Go to IMG.
Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level.
Search for the transaction ME21.Double click on ME21. Then search for TaxCode. It is advisable to configure also the info record. The tax code should be a required entry, and whatever you specify here will be the default value in the Purchase order.
Materials Management -> Purchasing -> Purchasing info record -> define screen layout.
When you get here you search for the transaction ME12 ,double click here; search for Input VAT indicator.
Regards ,
Kumar.

Validation of Tax Codes in Purchase Order

Dear All,
We have different tax codes like v0, v1, v2 maintained in system and we have projects(WBS) like Project1, Project2 etc.
The scenario is such that if i am trying to create an account assigned purchase order for a project with account assignement as Project1, system should allow only tax code v1. System should not allow other tax codes for project1.
Can we have tax code validation with respect to projects during PO creation.
Request, please provide steps that are required to mainatined to achive the above.
regards,
Suresh

Hi Suresh,
You can use SMOD enhancement MM06E005 component EXIT_SAPMM06E_012. This user exit is designed for checking custom data on the purchase order header, but can also be used for checking the standard PO data.
Some of the tables passed to the user exit are TEKPO and TEKKN, all items of the purchasing document and all account assignments, so you can compare the tax code with the project and produce an error message if the combination is incorrect.
Regards,
Monika

Danger of using old tax code in purchase order

Materials management, Finance and controlling modules are active in
system.we have created new tax codes at the end of Dec 2007 in system
as per the legal requirement.Also condition types are maintianed with
validity period. We have updated existing purchase orders (which are
going to be continued in year 2008) with new tax codes.
But now if by mistake while creating purchase order, user picks up old
tax code and saves PO, system does not give any error.
Is there any way by which we can restrict using of old tax codes at the
time of creating / changing Purchase orders?
Thank you for your time.

hi,
check the same in FTXP,limit the validity period of the old tax to 2007 only.

Default tax code in Purchase Order

hi,
somehow, is it possible to get default tax code (at "Item overview" under "Invoice"), as soon as enter material group (or by other means) in purchase order?
thanks

Dear Yogi,
Sorry, for posting in to Closed thread.
I had visited your same thread in to MM-Forum. Apart, whatever, suggestions have been provided, you may give a try to:
To default the taxcode in the purchase order item, use Condition Type: NAVS, with Access Sequence: 0003
Path: SPRO -> IMG -> Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level
T. Code: ME21 and Double click. Look for TaxCode. The tax code should be a required entry, and whatever you specify here will be the default value in the Purchase order.
It is advisable to configure also the info record.
Path: SPRO -> IMG -> Materials Management -> Purchasing -> Purchasing info record -> Define screen layout.
When you get here you search for the T. Code: ME12 (Change Purchasing Info Record), and double click here; search for Input TAX indicator.
You may also seek Advise from MM-Consultants, over this, by referring the whole solution in to your MM-thread.
Best Regards,
Amit

Tax Code in Purchase order

Hi Friends,
While creating purchase order, I am getting below error:
Tax code X2 does not exist for jurisdiction code CNM9W1N40
What could be the reason?Can anybody please help me?
Thanks,
Bhairav

It is giving below instructions. I am not able to get...
Tax code X2 does not exist for jurisdiction code CNM9W1N40
Message no. FF718
Diagnosis
You have entered tax codes and jurisdiction codes in the G/L account items. The amounts of these items are used as the tax base to check the tax amounts you have entered or to determine the taxes. The system has now determined that one or more of the "tax code / jurisdiction code" combinations do not exist in Customizing.
System response
Calculation of the taxes or checking of the taxes entered had to be terminated.
Procedure
Check the tax codes and the jurisdiction codes in the G/L account items or asset items. If these are correct, inform your system administrator.
Procedure for System Administration
Change the tax jurisdictions you specified in Customizing under Financial Accounting -> Financial Accounting Global settings -> Tax on Sales/Purchases -> Basic Settings -> Define Tax Jurisdictions
Thanks,
Bhairav

Reg. Output tax calcultion in purchase order.

Dear Experts
I have configured VAT (Tax code,jurisdiction code,FV11 entry) but it is not calculated with total
price. pls help me. I have configured Outpur tax.
Thanks
Rajakumar.k

Create Tax code in FTXP
Let us SAy A1 --Note : for purchasing it should be input tax only
Then in FV11 Create condition record with plant material and vendor combination with cond type as JVRD
Maintain the TAx rate as 4 % or whatever is applicable
also enter the Tax code as A1 which u have created for ur tax procedure TAXINN
SAve it
Create a PO for the same material,vendor and plant combination
and enter the Tax code as A1
I think with the above details ur tax should get calculated
regards
shailesh

Update Taxes in PO without Tax code in Purchase Order

Hi Experts,
Taxes percentage are frequently change in Indian business and create new input tax codes for updating the same changes in PO.
Please suggest without create new tax codes how can we maintained tax details in PO?
Thanks in advance.
Regards,
Shatrughan Singh

Hi,
Tax code creation required or not-Depends on which access sequence (JST1 or MWST ) used in your tax procedure.
If tax condition types have access sequence JST1,then you can maintain to change tax rate with validity period without creating a new tax code.
Validity Period available for tax condition types which have access sequence JST1 not access sequence MWST
Regards,
Biju K

Restrict changing the tax code in purchase order after goods receipt.

Hi,
Po is created with tax code x1.
Gr is done for partial quantity.
IR is still pending.
User has changed the tax code to x2.
This case we want to restrict the tax code change in PO after goods receipt.
Please advice.
Regards
Ravi Kumar

Hi Sumit,
Po created with wrong tax code x1.
Stores person has done the receipt and consumed the stock.
Now user has suddenly realised that tax code is wrong and changed the tax code in PO.
In IR we will use correct tax code and post the accounting entry.
Stock values will be adjusted properly. to stock ac if stock is there and to price diff ac if stock is consumed.
Point is user's are asking that how system is allowing to change the tax code after receipt.
Point to be attended is restrict the change of tax code by any means after Gr has happened.
what are the possibilities to restrict the change of tax code.
Regards
Ravi Kumar

Enter an input tax code, not an output tax code in Txn CNMM

Hi All,
We are trying to use PROMAN transaction CNMM from Project systems for converting PR to PO. But when I try to do that I get the following error
"Enter an input tax code, not an output tax code"
So it seems that the system is picking the incorrect sales tax code in PO because of which the PR is not converted to PO then. But when I check in transaction CNMM there is no place to input a tax code anywhere. So the system is probably picking it from somewhere, but I am not able to figure out where is it picking it from.
Does someone have an idea about where the system is picking the tax code?
Regards,
V S

Hi,
Can you do one thing in your testing server....
Create purchase requisition manually for that material and with respect to that requisition try to create PO without putting any tax code, and see whether you are able to create PO, keep the same document types at PR and PO level, (it should be the same when you create PO thru CNMM)
-Saleel

POs that accept Output tax code

Hi all -
I am trying to create a PO with Output tax as the Tax code in the Invoice tab in ME21N. Could anyone please let me know the types of POs that could be created with Output Tax code.
Thanks -
Shilpa

For Sales Order's related PO Can you use this Tax type..

Error for output tax code:Tax code I4 may only contain one assignment line.

Hi
While posting customer invoice with output tax code, I am getting following error.
Tax code I4 may only contain one assignment line.
Please help me resolve.
Regards
Rekha

There are quite some answered questions in this forum for this issue.
Here is one.
Error in Sample document (Message no. FF731)
Also, please search the forum with the following search key words.
Tax AND code AND may AND only AND contain AND one AND assignment AND line
Make sure you select all posts, not just the past 90 days (the default option), and you will see quite some hits.

Changing Tax Code in Sales Order

Hi All,
I've a requirement to change the tax code of MWST CT from normal value XX to a new tax code in sales order for few excpetion cases.
For normal cases the tax code will always be XX for MWST CT in the sales order. However for very specific business need the tax code for the existing sales order needs to be changed to a new value. The need for changing the tax code always arise after creating the sales order.
Kindly suggest the possible ways to meet this requirement.
Regards,
Ashish

Changing the tax code in the sales order is not std sp procedure and I don;t think sp allow tampering with it either.
The taxes are based on the combination for customer and material and I suggest that you maintain all tax codes at the material and customer level for all combinations possible and each customer is alloted one unique one.
What are the possible reason why tax changes. It can only be the delivery address is changed. If the material iself changes then you may have to modify the sales order itself but if there is a change in the ship to party then....
Now if the shipto party changes then you can always redetermine taxes in billing where the actual taxes will be redetermined based on the new conditions.
If you see the tax line item in the sales order you will see that it is greyed out.
You can change the excise duty but not taxes.
This is the default where the condition type is prohibited from changing manually. But if you change the setting to Free or manual then you can change the value of tax bu the tax code will be as determined by the combination of material and shipto.
regds
Jude
Edited by: jude xavier on Sep 7, 2008 8:23 PM
Edited by: jude xavier on Sep 7, 2008 8:24 PM

Tables for VAT or CST and RATE OF TAX for a PURCHASE ORDER

i am developing a report(abap ALV)
i need to display the VAT or CST and RATE OF TAX for a PURCHASE ORDER that has been posted .
which tables to refer?

hi kumar gaurav
Check KONV table..
based on Condition TYpe you can get...
Regards
Deva

Output Tax Code In Purchase Order

Similar Messages

Maybe you are looking for