Output Timing in CVS

The timing chart in the manuel shows that signals Inspection in progress, Camera Ready, and System Busy are timed the same. What is the difference in these signals.

The timing chart in the manuel shows that signals Inspection in progress, Camera Ready, and System Busy are timed the same. What is the difference in these signals
Hello WTOR.
Before specifically answering your question, I would just like to clarify exactly what signals you are asking about. If you wouldn't mind giving me the page number in the manual to which you are referring, I would be happy to clarify any information about the various IO on the Compact Vision System.
Thanks,
Colin C.
Applications Engineering
Colin Christofferson
Community Web Marketing
Blog

Similar Messages

  • Purchase Order Output Timing Error

    Upon creation/change of a purchase order, the system defaults an output timing of '2' instead of '4'. I checked NACE for the affected output type and found it to be listed as '4'. Where else can I check to see why the system is proposing a defualt of '2'?
    Thanks - points will be rewarded.

    in MN05 enter Output Type then check all Key Combinations. In one them you must have had it selected as 2.
    Please check all Key combinations
    Regards
    Adeel

  • How to Schedule Report Output in EXCEL (.cvs) format for Planning 11.1.2.1

    Hi all,
    I'm using Planning 11.1.2.1 for entering data and generating reports manually via Workspace. I wanna set up an automation process with a batch scheduler.
    I've gone over the documentation. I've read about creating batches first then scheduling batches next.
    However, the biggest issue I have is that I want to extract all my reports into EXCEL Spreadsheet (.cvs) format and according to the docs, it only supports output in PDF or HTML for 11.1.2.1.
    Is this true? Is there a way to work around this by using Business Rules at command prompt?
    Thanks,
    N

    If you have the Financial Report open there are two options:
    - in the bottom right hand corner of the report click the link: "Export In Query ready Mode"
    (this opens the report so you can use it as an Excel retrieve)
    - from the Hyperion menu, select File>Export>Excel
    (this exports the headers as objects and the data grid, so you can manipulate in Excel).
    Cheers, Iain

  • Sync output timing to hardware trigger (PFI?)

    I'd like to sync the output of my cards (2 PCI-6733 connected with an RTSI cable, and using  BNC-2110's) to the AC power line of the lab I work in. That is, when told to output, they will always wait and output at the same point in the 60Hz cycle.  
    To that end, I've built a circuit that gives a TTL signal that is synced to the building's AC line. I now need to find a way to take this TTL signal and use it as the starter for my experimental sequence. If there is a delay that's ok, however it needs to be a consistant delay (to within a few microseconds preferably). This is so that everytime I run my experimental sequence, I'm starting at the same point in the AC power cycle.
    Is it correct to use the PFI port to try and do this? Other suggestions?
    The sequence would be:
    Step 1: Cards are ready to write
    Step 2: Cards write once, started by hardware trigger of the TTL from the circuit I built.
    Step 3: Other Labview code runs, and then returns to step 1.
    Solved!
    Go to Solution.

    Ok. Knowing about DAQmx export signal is definitely helpful. I don't think I've got everything set up quite right though, as it's giving me an error with what I tried. 
    Error -89136 occurred at DAQmx Start Task.vi:1
    Possible reason(s):
    Specified route cannot be satisfied, because the hardware does not support it.
    Property: StartTrig.OutputTerm
    Destination Device: Dev1
    Destination Terminal: PFI0
    Task Name: _unnamedTask<1E>
    I'm not sure on the correct order of the DAQmx functions. I currently have: Create Channel -> Timing -> Write -> Export Signal (?) -> Start Task. This doesn't seem to be the correct way to do this though. The sample you linked to had the Write after the Start Task... which doesn't quite make sense to me... In addition, I'm not sure where to put the DAQmx Trigger.vi in this sequence.
    Any pointers to set me in the right direction? I've attached a screenshot and vi of my current code to show you what I do now. 
    Attachments:
    Write2PCI6733 (SubVI).vi ‏54 KB
    WriteToPCIscheme_Mar9_2012.PNG ‏59 KB

  • Output timing mismatch problem

    I am still very new to programming with LabVIEW, and infact programing in any languege at all (as an engineer this is only a part time role of mine) and yesterday I noticed a bug with one of my programs. I am attaching photos and descriptions of my code below. Non the less I have two programs. The first is called "Continious Pulse Firing" it takes a series of pulses that I write up and it fires them off at the correct time. It then writes these pulses to a shared global variable "Waveform" which you can see in the image as well as I send it up to the DAQ assistant for output.
    The second program which I have commonly used it or variations of it as a replacement for the DAQ assistant on many programs I have written. This tool takes the input from the global variable waveform and plays it out. I have also included a screen shot of the front panel from this program.
    Next suspecting that something was wrong the other day when looking at it in a scope, I went and connected the outputs from the 2 separate programs and overlaid them on a plot over oneanother. I modified some code from one of the sample programs that is included with LabVIEW to create this tool.  (It looks like this site is only allowing 3 pictures so I will try to include them in a reply to this post,) but the end result is that I am playing out at approximately 6 times the rate I should be. Now this has me wondering where am I going wrong in my program.
    Attachments:
    Continious Pulse Firing.jpg ‏115 KB
    wavegen program.jpg ‏66 KB
    Front panel of Wavegen program.jpg ‏49 KB

    Here's the photo of my probed signal. The white wave was generated with the Daq assitant while the red wave was generated by my code with the help of the global variable. The white plot is what the signal should be giving me while the red plot is wrong.
    Any ideas where I am going wrong?
    Attachments:
    Picture of Probe.jpg ‏211 KB

  • Photo Center Output (Costco, Walgreens, CVS, Meijer, etc.)0

    I am exporting images with the following "maximum" settings and getting very good results but the images are averaging 4 MB (I have a Nikon D70). The self-serve kiosks are a bit sluggish when reading from CD and it can be very time consuming to upload through the Internet.
    Has anyone experimented with lower quality or size, and/or processing them through Photoshop/ImageReady to reduce the size?
    Image Format: JPG
    Image Quality: 12
    Size To: Original Size
    Gamma Adjust: 1.00
    Black Point Compensation: Yes
    ColorSync Profile: (as appropriate)

    I always crop the images at home.
    So extrapulating from what you've both said... a 4 x 6 image at 320 ppi would be 1280 x 1920 so I can adjust the quality slider so the exported image is about this size. Unfortunately since every crop is a little different I would just need to find a setting that tended to work for every image.
    Shouldn't Aperture do this for me? It seems like the dpi setting should be ppi, then Aperture could perform the quality adjustment for each exported image.
    Right?
    I can try 10 and see what the output is.

  • Show Front Panel form VGA output of CVS

    I have built a stand-alone Real-Time Application on my CVS by following the method in ‘RT_Getting_Started.pdf’ file, and I think it is successful (because the ‘startup.rtexe’ file is already created in the startup folder in CVS). I was set the application file as a startup.
    Is it possible to show a Front Panel of Real-Time Application (Startup program) from a VGA output of CVS without using any PC?  I want to use only CVS and Monitor (from VGA output).

    hello MFarid,
    Thank you for your post.
    It is only possible to show some images and counters on the VGA output of an CVS. You will need a graphical operating system (like windows) to present the complete front panel of your VI. There are complete panel PC's (like PPC 2015 and PPC 2115) which are complete PC's with a touch screen.
    If you want to make a simple user interface (only some buttons to control the CSV and some simple data presenting) a touch panel (Windows CE device) can be used. Please be aware that you need a Labview touch panel module to deploy to this kind of device. The simple user interface can communicate throug shared variables with your Labview application on the CVI.
    So I'm sorry to say that with only a monitor and a CVS it isn't possible.
    Many greetings,
    Martijn
    Martijn S
    Applications Engineer
    NI Netherlands

  • Can image be shrunk to fit on CVS Monitor

    I have a Point Gray Scorpion camera with a resolution of 1600x1200 pixels. Is there a way to shrink the image so the entire image is shown on the CVS monitor without being cropped. I am using VBAI 2.0.2

    The VGA output on the CVS has a maximum resolution of 1280x1024. The only way to see the full field of view at this capture resolution is to add a Vision Assistant step that resamples the image to 1280x1024 (or smaller). If you resample before making measurements, you will be able to see the default overlays on the monitor, but lose some of the advantage of the high resolution. If you resample after your measurements, then you lose the display of the default overlays, but keep the full measurement accuracy of the high 1600x1200 image. You can always add custom overlays which will show up after resampling.
    Regards,
    Brent

  • Output processing

    hi gurus,
    here is an issue which I have regarding output processing.
    I  need to print a label as a batchjob at any time the user wants. For this, the ABAPERS  created a Z transaction from which it will take u to a selection screen. So once the user execute it, it should trigger the output printing of label for  each of the sales orders selected.
    So I will be using output determination and selecting dispatch time 3 (APPLICATION OWN TRANSACTION) . and use a seperate driver program.  My question is how I can link the Z transaction which will be exected for label printing  to  the  determination procedure.  If you check the TIMING tab in V/30  you can see an Output timing program and Form Routine. Do we need to maintain this if I am selecting the dipatch time as 3? Is it like Z transaction program will call the output timing program and  start the batch job.
    Any help will be greatly appreciated
    thanks in advance

    if you use V/30 select your cond. type
    and set Processing routines : Medium, Program, Form outline, Form
    to set other parameters just select  your cond. type and
    goto Details (F8) and set General Data,Default values, ...etc

  • Issue with spamassassin, now mail not working

    Hi ! I installed spamtrainer almost two months ago. Been feeding the [email protected] for several weeks now , 700 emails each day at least .
    There was very little improvement if none at all. Tried to add "@local_domains_maps = (1)" to amavisd.conf last night thinking it might be the problem , though no virtual domain exist. This was one of the issue on the default Amavisd config. The other one is adding the symbolic link which I already done.
    Computer froze while adding the parameter "@local_domains_maps = (1)", so I manually turn off the Power Mac, then mail stopped altogether. The mails are filing up but the clients couldn't send or receive since this incidence .
    FF is the maincf. and amavis.conf
    All help are greatly appreciated.
    mail:/Users/sysadmin root# postconf -n
    alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
    always_bcc =
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debug_peer_level = 2
    enable_server_options = yes
    html_directory = no
    inet_interfaces = all
    local_recipient_maps = proxy:unix:passwd.byname $alias_maps
    luser_relay =
    mail_owner = postfix
    mailbox_size_limit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 31457280
    mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
    mydomain = cpplaw.com
    mydomain_fallback = localhost
    myhostname = mail.cpplaw.com
    mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    owner_request_special = no
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost =
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpd_client_restrictions = permit_mynetworks permit
    smtpd_tls_key_file =
    unknown_local_recipient_reject_code = 550
    virtual_mailbox_domains =
    virtual_transport = virtual
    mail:/Users/sysadmin root# postconf -n
    alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
    always_bcc =
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debug_peer_level = 2
    enable_server_options = yes
    html_directory = no
    inet_interfaces = all
    local_recipient_maps = proxy:unix:passwd.byname $alias_maps
    luser_relay =
    mail_owner = postfix
    mailbox_size_limit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 31457280
    mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
    mydomain = cpplaw.com
    mydomain_fallback = localhost
    myhostname = mail.cpplaw.com
    mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    owner_request_special = no
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost =
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpd_client_restrictions = permit_mynetworks permit
    smtpd_tls_key_file =
    unknown_local_recipient_reject_code = 550
    virtual_mailbox_domains =
    virtual_transport = virtual
    mail:/Users/sysadmin root#
    _______________________Amavisd.cof_________________________
    use strict;
    # Configuration file for amavisd-new
    # This software is licensed under the GNU General Public License (GPL).
    # See comments at the start of amavisd-new for the whole license text.
    #Sections:
    # Section I - Essential daemon and MTA settings
    # Section II - MTA specific
    # Section III - Logging
    # Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
    # Section V - Per-recipient and per-sender handling, whitelisting, etc.
    # Section VI - Resource limits
    # Section VII - External programs, virus scanners, SpamAssassin
    # Section VIII - Debugging
    #GENERAL NOTES:
    # This file is a normal Perl code, interpreted by Perl itself.
    # - make sure this file (or directory where it resides) is NOT WRITABLE
    # by mere mortals, otherwise it represents a severe security risk!
    # - for values which are interpreted as booleans, it is recommended
    # to use 1 for true, and 0 or undef or '' for false.
    # THIS IS DIFFERENT FROM OLDER AMAVIS VERSIONS where "no" also meant false,
    # now it means true, like any nonempty string does!
    # - Perl syntax applies. Most notably: strings in "" may include variables
    # (which start with $ or @); to include characters @ and $ in double
    # quoted strings, precede them by a backslash; in single-quoted strings
    # the $ and @ lose their special meaning, so it is usually easier to use
    # single quoted strings. Still, in both cases a backslash need to be doubled
    # - variables with names starting with a '@' are lists, the values assigned
    # to them should be lists as well, e.g. ('one@foo', $mydomain, "three");
    # note the comma-separation and parenthesis. If strings in the list
    # do not contain spaces nor variables, a Perl operator qw() may be used
    # as a shorthand to split its argument on whitespace and produce a list
    # of strings, e.g. qw( one@foo example.com three ); Note that the argument
    # to qw is quoted implicitly and no variable interpretation is done within
    # (no '$' variable evaluations). The #-initiated comments can not be used
    # within the string. In other words, $ and # lose their special meaning
    # withing a qw argument, just like within '...' strings.
    # - all e-mail addresses in this file and as used internally by the daemon
    # are in their raw (rfc2821-unquoted and nonbracketed) form, i.e.
    # Bob "Funny" [email protected], not: "Bob \"Funny\" Dude"@example.com
    # and not <"@example.com>; also: '' and not ''.
    # Section I - Essential daemon and MTA settings
    # $MYHOME serves as a quick default for some other configuration settings.
    # More refined control is available with each individual setting further down.
    # $MYHOME is not used directly by the program. No trailing slash!
    #$MYHOME = '/var/lib/amavis'; # (default is '/var/amavis')
    # : $mydomain serves as a quick default for some other configuration settings.
    # : More refined control is available with each individual setting further down.
    # : $mydomain is never used directly by the program.
    $mydomain = 'cpplaw.com'; aol.com'; # (no useful default)
    # Set the user and group to which the daemon will change if started as root
    # (otherwise just keep the UID unchanged, and these settings have no effect):
    $daemon_user = 'clamav'; # (no default; customary: vscan or amavis)
    $daemon_group = 'clamav'; # (no default; customary: vscan or amavis)
    # Runtime working directory (cwd), and a place where
    # temporary directories for unpacking mail are created.
    # (no trailing slash, may be a scratch file system)
    $TEMPBASE = $MYHOME; # (must be set if other config vars use is)
    #$TEMPBASE = "$MYHOME/tmp"; # prefer to keep home dir /var/amavis clean?
    # $helpers_home sets environment variable HOME, and is passed as option
    # 'home_dir_for_helpers' to Mail::SpamAssassin::new. It should be a directory
    # on a normal persistent file system, not a scratch or temporary file system
    #$helpers_home = $MYHOME; # (defaults to $MYHOME)
    #$daemon_chroot_dir = $MYHOME; # (default is undef, meaning: do not chroot)
    #$pid_file = "$MYHOME/amavisd.pid"; # (default is "$MYHOME/amavisd.pid")
    #$lock_file = "$MYHOME/amavisd.lock"; # (default is "$MYHOME/amavisd.lock")
    # set environment variables if you want (no defaults):
    $ENV{TMPDIR} = $TEMPBASE; # wise, but usually not necessary
    # MTA SETTINGS, UNCOMMENT AS APPROPRIATE,
    # both $forward_method and $notify_method default to 'smtp:127.0.0.1:10025'
    # POSTFIX, or SENDMAIL in dual-MTA setup, or EXIM V4
    # (set host and port number as required; host can be specified
    # as IP address or DNS name (A or CNAME, but MX is ignored)
    #$forward_method = 'smtp:127.0.0.1:10025'; # where to forward checked mail
    #$notify_method = $forward_method; # where to submit notifications
    # NOTE: The defaults (above) are good for Postfix or dual-sendmail. You MUST
    # uncomment the approprate settings below if using other setups!
    # SENDMAIL MILTER, using amavis-milter.c helper program:
    #$forward_method = undef; # no explicit forwarding, sendmail does it by itself
    # milter; option -odd is needed to avoid deadlocks
    #$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -odd -f ${sender} -- ${recipient}';
    # just a thought: can we use use -Am instead of -odd ?
    # SENDMAIL (old non-milter setup, as relay):
    #$forward_method = 'pipe:flags=q argv=/usr/sbin/sendmail -C/etc/sendmail.orig.cf -i -f ${sender} -- ${recipient}';
    #$notify_method = $forward_method;
    # SENDMAIL (old non-milter setup, amavis.c calls local delivery agent):
    #$forward_method = undef; # no explicit forwarding, amavis.c will call LDA
    #$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -f ${sender} -- ${recipient}';
    # EXIM v3 (not recommended with v4 or later, which can use SMTP setup instead):
    #$forward_method = 'pipe:flags=q argv=/usr/sbin/exim -oMr scanned-ok -i -f ${sender} -- ${recipient}';
    #$notify_method = $forward_method;
    # prefer to collect mail for forwarding as BSMTP files?
    #$forward_method = "bsmtp:$MYHOME/out-%i-%n.bsmtp";
    #$notify_method = $forward_method;
    # Net::Server pre-forking settings
    # You may want $max_servers to match the width of your MTA pipe
    # feeding amavisd, e.g. with Postfix the 'Max procs' field in the
    # master.cf file, like the '2' in the: smtp-amavis unix - - n - 2 smtp
    $max_servers = 2; # number of pre-forked children (default 2)
    $max_requests = 10; # retire a child after that many accepts (default 10)
    $child_timeout=5*60; # abort child if it does not complete each task in n sec
    # (default: 8*60 seconds)
    # Check also the settings of @av_scanners at the end if you want to use
    # virus scanners. If not, you may want to delete the whole long assignment
    # to the variable @av_scanners, which will also remove the virus checking
    # code (e.g. if you only want to do spam scanning).
    # Here is a QUICK WAY to completely DISABLE some sections of code
    # that WE DO NOT WANT (it won't even be compiled-in).
    # For more refined controls leave the following two lines commented out,
    # and see further down what these two lookup lists really mean.
    #@bypass_virus_checks_acl = qw( . ); # uncomment to DISABLE anti-virus code
    #@bypass_spam_checks_acl = qw( . ); # uncomment to DISABLE anti-spam code
    # Any setting can be changed with a new assignment, so make sure
    # you do not unintentionally override these settings further down!
    # Lookup list of local domains (see README.lookups for syntax details)
    # NOTE:
    # For backwards compatibility the variable names @local_domains (old) and
    # @local_domains_acl (new) are synonyms. For consistency with other lookups
    # the name @local_domains_acl is now preferred. It also makes it more
    # obviously distinct from the new %local_domains hash lookup table.
    # local_domains* lookup tables are used in deciding whether a recipient
    # is local or not, or in other words, if the message is outgoing or not.
    # This affects inserting spam-related headers for local recipients,
    # limiting recipient virus notifications (if enabled) to local recipients,
    # in deciding if address extension may be appended, and in SQL lookups
    # for non-fqdn addresses. Set it up correctly if you need features
    # that rely on this setting (or just leave empty otherwise).
    # With Postfix (2.0) a quick reminder on what local domains normally are:
    # a union of domains spacified in: $mydestination, $virtual_alias_domains,
    # $virtual_mailbox_domains, and $relay_domains.
    @local_domains_acl = ( ".$mydomain" ); # $mydomain and its subdomains
    # @local_domains_acl = qw(); # default is empty, no recipient treated as local
    # @local_domains_acl = qw( .example.com );
    # @local_domains_acl = qw( .example.com !host.sub.example.net .sub.example.net );
    # @local_domains_acl = ( ".$mydomain", '.example.com', 'sub.example.net' );
    # or alternatively(A), using a Perl hash lookup table, which may be assigned
    # directly, or read from a file, one domain per line; comments and empty lines
    # are ignored, a dot before a domain name implies its subdomains:
    #read_hash(\%local_domains, '/var/amavis/local_domains');
    #or alternatively(B), using a list of regular expressions:
    # $local_domains_re = new_RE( qr'[@.]example\.com$'i );
    # see README.lookups for syntax and semantics
    # Section II - MTA specific (defaults should be ok)
    # if $relayhost_is_client is true, IP address in $notify_method and
    # $forward_method is dynamically overridden with SMTP client peer address
    # if available, which makes possible for several hosts to share one daemon
    #$relayhost_is_client = 1; # (defaults to false)
    #$insert_received_line = 1; # behave like MTA: insert 'Received:' header
    # (does not apply to sendmail/milter)
    # (default is true)
    # AMAVIS-CLIENT PROTOCOL INPUT SETTINGS (e.g. with sendmail milter)
    # (used with amavis helper clients like amavis-milter.c and amavis.c,
    # NOT needed for Postfix and Exim)
    $unix_socketname = "$MYHOME/amavisd.sock"; # amavis helper protocol socket
    #$unix_socketname = undef; # disable listening on a unix socket
    # (default is undef, i.e. disabled)
    # (usual setting is $MYHOME/amavisd.sock)
    # Do we receive quoted or raw addresses from the helper program?
    # (does not apply to SMTP; defaults to true)
    #$gets_addr_in_quoted_form = 1; # "Bob \"Funny\" Dude"@example.com
    #$gets_addr_in_quoted_form = 0; # Bob "Funny" [email protected]
    # SMTP SERVER (INPUT) PROTOCOL SETTINGS (e.g. with Postfix, Exim v4, ...)
    # (used when MTA is configured to pass mail to amavisd via SMTP or LMTP)
    $inet_socket_port = 10024; # accept SMTP on this local TCP port
    # (default is undef, i.e. disabled)
    # multiple ports may be provided: $inet_socket_port = [10024, 10026, 10028];
    # SMTP SERVER (INPUT) access control
    # - do not allow free access to the amavisd SMTP port !!!
    # when MTA is at the same host, use the following (one or the other or both):
    #$inet_socket_bind = '127.0.0.1'; # limit socket bind to loopback interface
    # (default is '127.0.0.1')
    @inet_acl = qw( 127.0.0.1 ); # allow SMTP access only from localhost IP
    # (default is qw( 127.0.0.1 ) )
    # when MTA (one or more) is on a different host, use the following:
    #@inet_acl = qw(127/8 10.1.0.1 10.1.0.2); # adjust the list as appropriate
    #$inet_socket_bind = undef; # bind to all IP interfaces
    # Example1:
    # @inet_acl = qw( 127/8 10/8 172.16/12 192.168/16 );
    # permit only SMTP access from loopback and rfc1918 private address space
    # Example2:
    # @inet_acl = qw( !192.168.1.12 172.16.3.3 !172.16.3/255.255.255.0
    # 127.0.0.1 10/8 172.16/12 192.168/16 );
    # matches loopback and rfc1918 private address space except host 192.168.1.12
    # and net 172.16.3/24 (but host 172.16.3.3 within 172.16.3/24 still matches)
    # Example3:
    # @inet_acl = qw( 127/8
    # !172.16.3.0 !172.16.3.127 172.16.3.0/25
    # !172.16.3.128 !172.16.3.255 172.16.3.128/25 );
    # matches loopback and both halves of the 172.16.3/24 C-class,
    # split into two subnets, except all four broadcast addresses
    # for these subnets
    # See README.lookups for details on specifying access control lists.
    # Section III - Logging
    # true (e.g. 1) => syslog; false (e.g. 0) => logging to file
    $DO_SYSLOG = 0; # (defaults to false)
    #$SYSLOG_LEVEL = 'user.info'; # (defaults to 'mail.info')
    # Log file (if not using syslog)
    $LOGFILE = "/var/log/amavis.log"; # (defaults to empty, no log)
    #NOTE: levels are not strictly observed and are somewhat arbitrary
    # 0: startup/exit/failure messages, viruses detected
    # 1: args passed from client, some more interesting messages
    # 2: virus scanner output, timing
    # 3: server, client
    # 4: decompose parts
    # 5: more debug details
    $log_level = 4; # (defaults to 0)
    # Customizeable template for the most interesting log file entry (e.g. with
    # $log_level=0) (take care to properly quote Perl special characters like '\')
    # For a list of available macros see README.customize .
    # only log infected messages (useful with log level 0):
    # $log_templ = '[? %#V |[? %#F ||banned filename ([%F|,])]|infected ([%V|,])]#
    # [? %#V |[? %#F ||, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]#
    # |, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]';
    # log both infected and noninfected messages (default):
    $log_templ = '[? %#V |[? %#F |[?%#D|Not-Delivered|Passed]|BANNED name/type (%F)]|INFECTED (%V)], #
    <%o> -> [<%R>|,][? %i ||, quarantine %i], Message-ID: %m, Hits: %c';
    # Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
    # Select notifications text encoding when Unicode-aware Perl is converting
    # text from internal character representation to external encoding (charset
    # in MIME terminology)
    # to be used in RFC 2047-encoded header field bodies, e.g. in Subject:
    #$hdr_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
    # to be used in notification body text: its encoding and Content-type.charset
    #$bdy_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
    # Default template texts for notifications may be overruled by directly
    # assigning new text to template variables, or by reading template text
    # from files. A second argument may be specified in a call to read_text(),
    # specifying character encoding layer to be used when reading from the
    # external file, e.g. 'utf8', 'iso-8859-1', or often just $bdy_encoding.
    # Text will be converted to internal character representation by Perl 5.8.0
    # or later; second argument is ignored otherwise. See PerlIO::encoding,
    # Encode::PerlIO and perluniintro man pages.
    # $notify_sender_templ = read_text('/var/amavis/notify_sender.txt');
    # $notify_virus_sender_templ= read_text('/var/amavis/notify_virus_sender.txt');
    # $notify_virus_admin_templ = read_text('/var/amavis/notify_virus_admin.txt');
    # $notify_virus_recips_templ= read_text('/var/amavis/notify_virus_recips.txt');
    # $notify_spam_sender_templ = read_text('/var/amavis/notify_spam_sender.txt');
    # $notify_spam_admin_templ = read_text('/var/amavis/notify_spam_admin.txt');
    # If notification template files are collectively available in some directory,
    # use read_l10n_templates which calls read_text for each known template.
    # read_l10n_templates('/etc/amavis/en_US');
    # Here is an overall picture (sequence of events) of how pieces fit together
    # (only virus controls are shown, spam controls work the same way):
    # bypass_virus_checks set for all recipients? ==> PASS
    # no viruses? ==> PASS
    # log virus if $log_templ is nonempty
    # quarantine if $virus_quarantine_to is nonempty
    # notify admin if $virus_admin (lookup) nonempty
    # notify recips if $warnvirusrecip and (recipient is local or $warn_offsite)
    # add address extensions for local recipients (when enabled)
    # send (non-)delivery notifications
    # to sender if DSN needed (BOUNCE) or ($warnvirussender and D_PASS)
    # virus_lovers or final_destiny==D_PASS ==> PASS
    # DISCARD (2xx) or REJECT (5xx) (depending on final_*_destiny)
    # Equivalent flow diagram applies for spam checks.
    # If a virus is detected, spam checking is skipped entirely.
    # The following symbolic constants can be used in *destiny settings:
    # D_PASS mail will pass to recipients, regardless of bad contents;
    # D_DISCARD mail will not be delivered to its recipients, sender will NOT be
    # notified. Effectively we lose mail (but will be quarantined
    # unless disabled). Not a decent thing to do for a mailer.
    # D_BOUNCE mail will not be delivered to its recipients, a non-delivery
    # notification (bounce) will be sent to the sender by amavisd-new;
    # Exception: bounce (DSN) will not be sent if a virus name matches
    # $viruses_that_fake_sender_re, or to messages from mailing lists
    # (Precedence: bulk|list|junk);
    # D_REJECT mail will not be delivered to its recipients, sender should
    # preferably get a reject, e.g. SMTP permanent reject response
    # (e.g. with milter), or non-delivery notification from MTA
    # (e.g. Postfix). If this is not possible (e.g. different recipients
    # have different tolerances to bad mail contents and not using LMTP)
    # amavisd-new sends a bounce by itself (same as D_BOUNCE).
    # Notes:
    # D_REJECT and D_BOUNCE are similar, the difference is in who is responsible
    # for informing the sender about non-delivery, and how informative
    # the notification can be (amavisd-new knows more than MTA);
    # With D_REJECT, MTA may reject original SMTP, or send DSN (delivery status
    # notification, colloquially called 'bounce') - depending on MTA;
    # Best suited for sendmail milter, especially for spam.
    # With D_BOUNCE, amavisd-new (not MTA) sends DSN (can better explain the
    # reason for mail non-delivery, but unable to reject the original
    # SMTP session). Best suited to reporting viruses, and for Postfix
    # and other dual-MTA setups, which can't reject original client SMTP
    # session, as the mail has already been enqueued.
    $final_virus_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
    $final_banned_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
    $final_spam_destiny = D_PASS; # (defaults to D_REJECT)
    $final_bad_header_destiny = D_PASS; # (defaults to D_PASS), D_BOUNCE suggested
    # Alternatives to consider for spam:
    # - use D_PASS if clients will do filtering based on inserted mail headers;
    # - use D_DISCARD, if kill_level is set safely high;
    # - use D_BOUNCE instead of D_REJECT if not using milter;
    # There are no sensible alternatives to D_BOUNCE for viruses, but consider:
    # - use D_PASS (or virus_lovers) and $warnvirussender=1 to deliver viruses;
    # - use D_REJECT instead of D_BOUNCE if using milter and under heavy
    # virus storm;
    # Don't bother to set both D_DISCARD and $warn*sender=1, it will get mapped
    # to D_BOUNCE.
    # The separation of *_destiny values into D_BOUNCE, D_REJECT, D_DISCARD
    # and D_PASS made settings $warnvirussender and $warnspamsender only still
    # useful with D_PASS.
    # The following $warn*sender settings are ONLY used when mail is
    # actually passed to recipients ($final_*_destiny=D_PASS, or *_lovers*).
    # Bounces or rejects produce non-delivery status notification anyway.
    # Notify virus sender?
    #$warnvirussender = 1; # (defaults to false (undef))
    # Notify spam sender?
    #$warnspamsender = 1; # (defaults to false (undef))
    # Notify sender of banned files?
    #$warnbannedsender = 1; # (defaults to false (undef))
    # Notify sender of syntactically invalid header containing non-ASCII characters?
    #$warnbadhsender = 1; # (defaults to false (undef))
    # Notify virus (or banned files) RECIPIENT?
    # (not very useful, but some policies demand it)
    #$warnvirusrecip = 1; # (defaults to false (undef))
    #$warnbannedrecip = 1; # (defaults to false (undef))
    # Notify also non-local virus/banned recipients if $warn*recip is true?
    # (including those not matching local_domains*)
    #$warn_offsite = 1; # (defaults to false (undef), i.e. only notify locals)
    # Treat envelope sender address as unreliable and don't send sender
    # notification / bounces if name(s) of detected virus(es) match the list.
    # Note that virus names are supplied by external virus scanner(s) and are
    # not standardized, so virus names may need to be adjusted.
    # See README.lookups for syntax.
    $viruses_that_fake_sender_re = new_RE(
    qr'nimda|hybris|klez|bugbear|yaha|braid|sobig|fizzer|palyh|peido|holar'i );
    # where to send ADMIN VIRUS NOTIFICATIONS (should be a fully qualified address)
    # - the administrator address may be a simple fixed e-mail address (a scalar),
    # or may depend on the SENDER address (e.g. its domain), in which case
    # a ref to a hash table can be specified (specify lower-cased keys,
    # dot is a catchall, see README.lookups).
    # Empty or undef lookup disables virus admin notifications.
    $virus_admin = '[email protected]';
    # $virus_admin = undef; # do not send virus admin notifications (default)
    # $virus_admin = {'not.example.com' => '', '.' => '[email protected]'};
    # $virus_admin = '[email protected]';
    # equivalent to $virus_admin, but for spam admin notifications:
    #$spam_admin = '[email protected]';# $spam_admin = undef; # do not send spam admin notifications (default)
    # $spam_admin = {'not.example.com' => '', '.' => '[email protected]'};
    #advanced example, using a hash lookup table:
    # - $virus_admin = {
    # '[email protected]' => '[email protected]',
    # '.sub1.example.com' => '[email protected]',
    # '.sub2.example.com' => '', # don't send admin notifications
    # 'a.sub3.example.com' => '[email protected]',
    # '.sub3.example.com' => '[email protected]',
    # '.example.com' => '[email protected]', # catchall for our virus senders
    # '.' => '[email protected]', # catchall for the rest
    # whom notification reports are sent from (ENVELOPE SENDER);
    # may be a null reverse path, or a fully qualified address:
    # (admin and recip sender addresses default to $mailfrom
    # for compatibility, which in turn defaults to undef (empty) )
    # If using strings in double quotes, don't forget to quote @, i.e. \@
    $mailfrom_notify_admin = "virusalert\@$mydomain";
    $mailfrom_notify_recip = "virusalert\@$mydomain";
    $mailfrom_notify_spamadmin = "spam.police\@$mydomain";
    # 'From' HEADER FIELD for sender and admin notifications.
    # This should be a replyable address, see rfc1894. Not to be confused
    # with $mailfrom_notify_sender, which is the envelope address and
    # should be empty (null reverse path) according to rfc2821.
    # $hdrfrom_notify_sender = "amavisd-new <postmaster\@$mydomain>";
    # $hdrfrom_notify_sender = 'amavisd-new <[email protected]>';
    # (defaults to: "amavisd-new <postmaster\@$myhostname>")
    # $hdrfrom_notify_admin = $mailfrom_notify_admin;
    # (defaults to: $mailfrom_notify_admin)
    # $hdrfrom_notify_spamadmin = $mailfrom_notify_spamadmin;
    # (defaults to: $mailfrom_notify_spamadmin)
    # whom quarantined messages appear to be sent from (envelope sender)
    $mailfrom_to_quarantine = undef; # original sender if undef, or set explicitly
    # (default is undef)
    # Location to put infected mail into: (applies to 'local:' quarantine method)
    # empty for not quarantining, may be a file (mailbox),
    # or a directory (no trailing slash)
    # (the default value is undef, meaning no quarantine)
    $QUARANTINEDIR = '/var/virusmails';
    #$virus_quarantine_method = "local:virus-%i-%n"; # default
    #$spam_quarantine_method = "local:spam-%b-%i-%n"; # default
    #use the new 'bsmtp:' method as an alternative to the default 'local:'
    #$virus_quarantine_method = "bsmtp:$QUARANTINEDIR/virus-%i-%n.bsmtp";
    #$spam_quarantine_method = "bsmtp:$QUARANTINEDIR/spam-%b-%i-%n.bsmtp";
    # When using the 'local:' quarantine method (default), the following applies:
    # A finer control of quarantining is available through variable
    # $virus_quarantine_to/$spam_quarantine_to. It may be a simple scalar string,
    # or a ref to a hash lookup table, or a regexp lookup table object,
    # which makes possible to set up per-recipient quarantine addresses.
    # The value of scalar $virus_quarantine_to/$spam_quarantine_to (or a
    # per-recipient lookup result from the hash table %$virus_quarantine_to)
    # is/are interpreted as follows:
    # VARIANT 1:
    # empty or undef disables quarantine;
    # VARIANT 2:
    # a string NOT containg an '@';
    # amavisd will behave as a local delivery agent (LDA) and will quarantine
    # viruses to local files according to hash %local_delivery_aliases (pseudo
    # aliases map) - see subroutine mail_to_local_mailbox() for details.
    # Some of the predefined aliases are 'virus-quarantine' and 'spam-quarantine'.
    # Setting $virus_quarantine_to ($spam_quarantine_to) to this string will:
    # * if $QUARANTINEDIR is a directory, each quarantined virus will go
    # to a separate file in the $QUARANTINEDIR directory (traditional
    # amavis style, similar to maildir mailbox format);
    # * otherwise $QUARANTINEDIR is treated as a file name of a Unix-style
    # mailbox. All quarantined messages will be appended to this file.
    # Amavisd child process must obtain an exclusive lock on the file during
    # delivery, so this may be less efficient than using individual files
    # or forwarding to MTA, and it may not work across NFS or other non-local
    # file systems (but may be handy for pickup of quarantined files via IMAP
    # for example);
    # VARIANT 3:
    # any email address (must contain '@').
    # The e-mail messages to be quarantined will be handed to MTA
    # for delivery to the specified address. If a recipient address local to MTA
    # is desired, you may leave the domain part empty, e.g. 'infected@', but the
    # '@' character must nevertheless be included to distinguish it from variant 2.
    # This method enables more refined delivery control made available by MTA
    # (e.g. its aliases file, other local delivery agents, dealing with
    # privileges and file locking when delivering to user's mailbox, nonlocal
    # delivery and forwarding, fan-out lists). Make sure the mail-to-be-quarantined
    # will not be handed back to amavisd for checking, as this will cause a loop
    # (hopefully broken at some stage)! If this can be assured, notifications
    # will benefit too from not being unecessarily virus-scanned.
    # By default this is safe to do with Postfix and Exim v4 and dual-sendmail
    # setup, but probably not safe with sendmail milter interface without
    # precaution.
    # (the default value is undef, meaning no quarantine)
    #$virus_quarantine_to = '[email protected]'; # traditional local quarantine
    #$virus_quarantine_to = 'infected@'; # forward to MTA for delivery
    #$virus_quarantine_to = "virus-quarantine\@$mydomain"; # similar
    #$virus_quarantine_to = '[email protected]'; # similar
    #$virus_quarantine_to = undef; # no quarantine
    #$virus_quarantine_to = new_RE( # per-recip multiple quarantines
    # [qr'^user@example\.com$'i => 'infected@'],
    # [qr'^(.*)@example\.com$'i => 'virus-${1}@example.com'],
    # [qr'^(.*)(@[^@])?$'i => 'virus-${1}${2}'],
    # [qr/.*/ => 'virus-quarantine'] );
    # similar for spam
    # (the default value is undef, meaning no quarantine)
    #$spam_quarantine_to = '[email protected]';
    #$spam_quarantine_to = "spam-quarantine\@$mydomain";
    #$spam_quarantine_to = new_RE( # per-recip multiple quarantines
    # [qr'^(.*)@example\.com$'i => 'spam-${1}@example.com'],
    # [qr/.*/ => 'spam-quarantine'] );
    # In addition to per-recip quarantine, a by-sender lookup is possible. It is
    # similar to $spam_quarantine_to, but the lookup key is the sender address:
    #$spam_quarantine_bysender_to = undef; # dflt: no by-sender spam quarantine
    # Add X-Virus-Scanned header field to mail?
    $X_HEADER_TAG = 'X-Virus-Scanned'; # (default: undef)
    # Leave empty to add no header field # (default: undef)
    $X_HEADER_LINE = "by amavisd-new at $mydomain";
    $remove_existing_x_scanned_headers = 0; # leave existing X-Virus-Scanned alone
    #$remove_existing_x_scanned_headers= 1; # remove existing headers
    # (defaults to false)
    $remove_existing_spam_headers = 0; # leave existing X-Spam* headers alone
    #$remove_existing_spam_headers = 1; # remove existing spam headers if
    # spam scanning is enabled (default)
    # set $bypass_decode_parts to true if you only do spam scanning, or if you
    # have a good virus scanner that can deal with compression and recursively
    # unpacking archives by itself, and save amavisd the trouble.
    # Disabling decoding also causes banned_files checking to only see
    # MIME names and MIME content types, not the content classification types
    # as provided by the file(1) utility.
    # It is a double-edged sword, make sure you know what you are doing!
    #$bypass_decode_parts = 1; # (defaults to false)
    # don't trust this file type or corresponding unpacker for this file type,
    # keep both the original and the unpacked file
    # (lookup key is what file(1) utility returned):
    $keep_decoded_original_re = new_RE(
    qr'^(ASCII|text|uuencoded|xxencoded|binhex)'i,
    # Checking for banned MIME types and names. If any mail part matches,
    # the whole mail is rejected, much like the way viruses are handled.
    # A list in object $banned_filename_re can be defined to provide a list
    # of Perl regular expressions to be matched against each part's:
    # * Content-Type value (both declared and effective mime-type),
    # including the possible security risk content types
    # message/partial and message/external-body, as specified by rfc2046;
    # * declared (recommended) file names as specified by MIME subfields
    # Content-Disposition.filename and Content-Type.name, both in their
    # raw (encoded) form and in rfc2047-decoded form if applicable;
    # * file content type as guessed by 'file(1)' utility, both the raw result
    # from file(1), as well as short type name, classified into names such as
    # .asc, .txt, .html, .doc, .jpg, .pdf, .zip, .exe, ..., which is always
    # beginning with a dot - see subroutine determine_file_types().
    # This step is done only if $bypass_decode_parts is not true.
    # * leave $banned_filename_re undefined to disable these checks
    # (giving an empty list to new_RE() will also always return false)
    $banned_filename_re = new_RE(
    qr'\.[a-zA-Z][a-zA-Z0-9]{0,3}\.(vbs|pif|scr|bat|com|exe|dll)$'i, # double extension
    # qr'.\.(exe|vbs|pif|scr|bat|com)$'i, # banned extension - basic
    # qr'.\.(ade|adp|bas|bat|chm|cmd|com|cpl|crt|exe|hlp|hta|inf|ins|isp|js|
    # jse|lnk|mdb|mde|msc|msi|msp|mst|pcd|pif|reg|scr|sct|shs|shb|vb|
    # vbe|vbs|wsc|wsf|wsh)$'ix, # banned extension - long
    # qr'^\.(exe|zip|lha|tnef)$'i, # banned file(1) types
    # qr'^application/x-msdownload$'i, # banned MIME types
    # qr'^message/partial$'i, qr'^message/external-body$'i, # rfc2046
    # See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
    # and http://www.cknow.com/vtutor/vtextensions.htm
    # A little trick: a pattern qr'\.exe$' matches both a short type name '.exe',
    # as well as any file name which happens to end with .exe. If only matching
    # a file name is desired, but not the short name, a pattern qr'.\.exe$'i
    # or similar may be used, which requires that at least one character preceeds
    # the '.exe', and so it will never match short file types, which always start
    # with a dot.
    # Section V - Per-recipient and per-sender handling, whitelisting, etc.
    # %virus_lovers, @virus_lovers_acl and $virus_lovers_re lookup tables:
    # (these should be considered policy options, they do not disable checks,
    # see bypas*checks for that!)
    # Exclude certain RECIPIENTS from virus filtering by adding their lower-cased
    # envelope e-mail address (or domain only) to the hash %virus_lovers, or to
    # the access list @virus_lovers_acl - see README.lookups and examples.
    # Make sure the appropriate form (e.g. external/internal) of address
    # is used in case of virtual domains, or when mapping external to internal
    # addresses, etc. - this is MTA-specific.
    # Notifications would still be generated however (see the overall
    # picture above), and infected mail (if passed) gets additional header:
    # X-AMaViS-Alert: INFECTED, message contains virus: ...
    # (header not inserted with milter interface!)
    # NOTE (milter interface only): in case of multiple recipients,
    # it is only possible to drop or accept the message in its entirety - for all
    # recipients. If all of them are virus lovers, we'll accept mail, but if
    # at least one recipient is not a virus lover, we'll discard the message.
    # %bypass_virus_checks, @bypass_virus_checks_acl and $bypass_virus_checks_re
    # lookup tables:
    # (this is mainly a time-saving option, unlike virus_lovers* !)
    # Similar in concept to %virus_lovers, a hash %bypass_virus_checks,
    # access list @bypass_virus_checks_acl and regexp list $bypass_virus_checks_re
    # are used to skip entirely the decoding, unpacking and virus checking,
    # but only if ALL recipients match the lookup.
    # %bypass_virus_checks/@bypass_virus_checks_acl/$bypass_virus_checks_re
    # do NOT GUARANTEE the message will NOT be checked for viruses - this may
    # still happen when there is more than one recipient for a message, and
    # not all of them match these lookup tables. To guarantee virus delivery,
    # a recipient must also match %virus_lovers/@virus_lovers_acl lookups
    # (but see milter limitations above),
    # NOTE: it would not be clever to base virus checks on SENDER address,
    # since there are no guarantees that it is genuine. Many viruses
    # and spam messages fake sender address. To achieve selective filtering
    # based on the source of the mail (e.g. IP address, MTA port number, ...),
    # use mechanisms provided by MTA if available.
    # Similar to lookup tables controlling virus checking, there exist
    # spam scanning, banned names/types, and headers_checks control counterparts:
    # %spam_lovers, @spam_lovers_acl, $spam_lovers_re
    # %banned_files_lovers, @banned_files_lovers_acl, $banned_files_lovers_re
    # %bad_header_lovers, @bad_header_lovers_acl, $bad_header_lovers_re
    # and:
    # %bypass_spam_checks/@bypass_spam_checks_acl/$bypass_spam_checks_re
    # %bypass_banned_checks/@bypass_banned_checks_acl/$bypass_banned_checks_re
    # %bypass_header_checks/@bypass_header_checks_acl/$bypass_header_checks_re
    # See README.lookups for details about the syntax.
    # The following example disables spam checking altogether,
    # since it matches any recipient e-mail address (any address
    # is a subdomain of the top-level root DNS domain):
    # @bypass_spam_checks_acl = qw( . );
    # @bypass_header_checks_acl = qw( [email protected] );
    # @bad_header_lovers_acl = qw( [email protected] );
    # See README.lookups for further detail, and examples below.
    # $virus_lovers{lc("postmaster\@$mydomain")} = 1;
    # $virus_lovers{lc('[email protected]')} = 1;
    # $virus_lovers{lc('[email protected]')} = 1;
    # $virus_lovers{lc('some.user@')} = 1; # this recipient, regardless of domain
    # $virus_lovers{lc('[email protected]')} = 0; # never, even if domain matches
    # $virus_lovers{lc('example.com')} = 1; # this domain, but not its subdomains
    # $virus_lovers{lc('.example.com')}= 1; # this domain, including its subdomains
    #or:
    # @virus_lovers_acl = qw( [email protected] !lab.xxx.com .xxx.com yyy.org );
    # $bypass_virus_checks{lc('[email protected]')} = 1;
    # @bypass_virus_checks_acl = qw( some.ddd !butnot.example.com .example.com );
    # @virus_lovers_acl = qw( [email protected] );
    # $virus_lovers_re = new_RE( qr'(helpdesk|postmaster)@example\.com$'i );
    # $spam_lovers{lc("postmaster\@$mydomain")} = 1;
    # $spam_lovers{lc('[email protected]')} = 1;
    # $spam_lovers{lc('[email protected]')} = 1;
    # @spam_lovers_acl = qw( !.example.com );
    # $spam_lovers_re = new_RE( qr'^user@example\.com$'i );
    # don't run spam check for these RECIPIENT domains:
    # @bypass_spam_checks_acl = qw( d1.com .d2.com a.d3.com );
    # or the other way around (bypass check for all BUT these):
    # @bypass_spam_checks_acl = qw( !d1.com !.d2.com !a.d3.com . );
    # a practical application: don't check outgoing mail for spam:
    # @bypass_spam_checks_acl = ( "!.$mydomain", "." );
    # (a downside of which is that such mail will not count as ham in SA bayes db)
    # Where to find SQL server(s) and database to support SQL lookups?
    # A list of triples: (dsn,user,passw). (dsn = data source name)
    # Specify more than one for multiple (backup) SQL servers.
    # See 'man DBI', 'man DBD::mysql', 'DBD::Pg', ... for details.
    # @lookup_sql_dsn =
    # ( ['DBI:mysql:mail:host1', 'some-username1', 'some-password1'],
    # ['DBI:mysql:mail:host2', 'some-username2', 'some-password2'] );
    # ('mail' in the example is the database name, choose what you like)
    # With PostgreSQL the dsn (first element of the triple) may look like:
    # 'DBI:Pg:host=host1;dbname=mail'
    # The SQL select clause to fetch per-recipient policy settings.
    # The %k will be replaced by a comma-separated list of query addresses
    # (e.g. full address, domain only, catchall). Use ORDER, if there
    # is a chance that multiple records will match - the first match wins.
    # If field names are not unique (e.g. 'id'), the later field overwrites the
    # earlier in a hash returned by lookup, which is why we use '*,users.id'.
    # No need to uncomment the following assignment if the default is ok.
    # $sql_select_policy = 'SELECT *,users.id FROM users,policy'.
    # ' WHERE (users.policy_id=policy.id) AND (users.email IN (%k))'.
    # ' ORDER BY users.priority DESC';
    # The SQL select clause to check sender in per-recipient whitelist/blacklist
    # The first SELECT argument '?' will be users.id from recipient SQL lookup,
    # the %k will be sender addresses (e.g. full address, domain only, catchall).
    # The default value is:
    # $sql_select_white_black_list = 'SELECT wb FROM wblist,mailaddr'.
    # ' WHERE (rid=?) AND (sid=mailaddr.id) AND (mailaddr.email IN (%k))'.
    # ' ORDER BY mailaddr.priority DESC';
    # To disable SQL white/black list, set to undef (otherwise comment-out
    # the following statement, leaving it at the default value):
    $sql_select_white_black_list = undef; # undef disables SQL white/blacklisting
    # If you decide to pass viruses (or spam) to certain recipients using the
    # above lookup tables or using $final_virus_destiny=1, you can set
    # the variable $addr_extension_virus ($addr_extension_spam) to some
    # string, and the recipient address will have this string appended
    # as an address extension to the local-part of the address. This extension
    # can be used by final local delivery agent to place such mail in different
    # folders. Leave these two variables undefined or empty strings to prevent
    # appending address extensions. Setting has no effect on recipient which will
    # not be receiving viruses/spam. Recipients who do not match lookup tables
    # local_domains* are not affected.
    # LDAs usually default to stripping away address extension if no special
    # handling is specified, so having this option enabled normally does no harm,
    # provided the $recipients_delimiter matches the setting on the final
    # MTA's LDA.
    # $addr_extension_virus = 'virus'; # (default is undef, same as empty)
    # $addr_extension_spam = 'spam'; # (default is undef, same as empty)
    # $addr_extension_banned = 'banned'; # (default is undef, same as empty)
    # Delimiter between local part of the recipient address and address extension
    # (which can optionally be added, see variables $addr_extension_virus and
    # $addr_extension_spam). E.g. recipient address <[email protected]> gets changed
    # to <[email protected]>.
    # Delimiter should match equivalent (final) MTA delimiter setting.
    # (e.g. for Postfix add 'recipient_delimiter = +' to main.cf)
    # Setting it to an empty string or to undef disables this feature
    # regardless of $addr_extension_virus and $addr_extension_spam settings.
    $recipient_delimiter = '+'; # (default is '+')
    # true: replace extension; false: append extension
    # $replace_existing_extension = 1; # (default is false)
    # Affects matching of localpart of e-mail addresses (left of '@')
    # in lookups: true = case sensitive, false = case insensitive
    $localpart_is_case_sensitive = 0; # (default is false)
    # ENVELOPE SENDER WHITELISTING / BLACKLISTING - GLOBAL (RECIPIENT-INDEPENDENT)
    # WHITELISTING: use ENVELOPE SENDER lookups to ENSURE DELIVERY from whitelisted
    # senders even if the message is recognized as spam. Effectively, for the
    # specified senders, message RECIPIENTS temporarily become 'spam_lovers', with
    # further processing being the same as otherwise specified for spam lovers.
    # It does not turn off inserting spam-related headers, if they are enabled.
    # BLACKLISTING: messages from specified SENDERS are DECLARED SPAM.
    # Effectively, for messages from blacklisted senders, spam level
    # is artificially pushed high, and the normal spam processing applies,
    # resulting in 'X-Spam-Flag: YES', high 'X-Spam-Level' bar and other usual
    # reactions to spam, including possible rejection. If the message nevertheless
    # still passes (e.g. for spam loving recipients), it is tagged as BLACKLISTED
    # in the 'X-Spam-Status' header field, but the reported spam value and
    # set of tests in this report header field (if available from SpamAssassin,
    # which may have not been called) is not adjusted.
    # A sender may be both white- and blacklisted at the same time,
    # settings are independent. For example, being both white- and blacklisted,
    # message is delivered to recipients, but is tagged as spam.
    # If ALL recipients of the message either white- or blacklist the sender,
    # spam scanning (calling the SpamAssassin) is bypassed, saving on time.
    # The following variables (lookup tables) are available, with the semantics
    # and syntax as specified in README.lookups:
    # %whitelist_sender, @whitelist_sender_acl, $whitelist_sender_re
    # %blacklist_sender, @blacklist_sender_acl, $blacklist_sender_re
    # SOME EXAMPLES:
    #ACL:
    # @whitelist_sender_acl = qw( .example.com );
    # @whitelist_sender_acl = ( ".$mydomain" ); # $mydomain and its subdomains
    # NOTE: This is not a reliable way of turning off spam checks for
    # locally-originating mail, as sender address can easily be faked.
    # To reliably avoid spam-scanning outgoing mail,
    # use @bypass_spam_checks_acl .
    #RE:
    # $whitelist_sender_re = new_RE(
    # qr'^postmaster@.*\bexample\.com$'i,
    # qr'^owner-[^@]*@'i, qr'-request@'i,
    # qr'\.example\.com$'i );
    $blacklist_sender_re = new_RE(
    qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou|greatcasino)@'i,
    qr'^(investments|lose_weight_today|market.alert|money2you|MyGreenCard)@'i,
    qr'^(new\.tld\.registry|opt-out|opt-in|optin|saveonlsmoking2002k)@'i,
    qr'^(specialoffer|specialoffers|stockalert|stopsnoring|wantsome)@'i,
    qr'^(workathome|yesitsfree|your_friend|greatoffers)@'i,
    qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i,
    #HASH lookup variant:
    # NOTE: Perl operator qw splits its argument string by whitespace
    # and produces a list. This means that addresses can not contain
    # whitespace, and there is no provision for comments within the string.
    # You can use the normal Perl list syntax if you have special requirements,
    # e.g. map {...} ('one user@bla', '.second.com'), or use read_hash to read
    # addresses from a file.
    # a hash lookup table can be read from a file,
    # one address per line, comments and empty lines are permitted:
    # read_hash(\%whitelist_sender, '/var/amavis/whitelist_sender');
    # ... or set directly:
    # $whitelist_sender{''} = 1; # don't spam-check MTA bounces
    map { $whitelist_sender{lc($_)}=1 } (qw(
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    returns.groups.yahoo.com
    # ENVELOPE SENDER WHITELISTING / BLACKLISTING - PER-RECIPIENT
    # The same semantics as for global white/blacklisting applies, but this
    # time each recipient (or its domain, or subdomain, ...) can be given
    # an individual lookup table for matching senders. The per-recipient lookups
    # override the global lookups, which serve as a fallback default.
    # Specify a two-level lookup table: the key for the outer table is recipient,
    # and the result should be an inner lookup table (hash or ACL or RE),
    # where the key used will be the sender.
    #$per_recip_blacklist_sender_lookup_tables = {
    # '[email protected]'=>new_RE(qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i),
    # '[email protected]'=>[qw( [email protected],org .d2.example,org )],
    #$per_recip_whitelist_sender_lookup_tables = {
    # '[email protected]' => [qw( [email protected] .other.example.org )],
    # '.my1.example.com' => [qw( !foe.other.example,org .other.example,org )],
    # '.my2.example.com' => read_hash('/var/amavis/my2-wl.dat'),
    # 'abuse@' => { 'postmaster@'=>1,
    # '[email protected]'=>1, '[email protected]'=>1 },
    # Section VI - Resource limits
    # Sanity limit to the number of allowed recipients per SMTP transaction
    # $smtpd_recipient_limit = 1000; # (default is 1000)
    # Resource limitations to protect against mail bombs (e.g. 42.zip)
    # Maximum recursion level for extraction/decoding (0 or undef disables limit)
    $MAXLEVELS = 14; # (default is undef, no limit)
    # Maximum number of extracted files (0 or undef disables the limit)
    $MAXFILES = 1500; # (default is undef, no limit)
    # For the cumulative total of all decoded mail parts we set max storage size
    # to defend against mail bombs. Even though parts may be deleted (replaced
    # by decoded text) during decoding, the size they occupied is _not_ returned
    # to the quota pool.
    # Parameters to storage quota formula for unpacking/decoding/decompressing
    # Formula:
    # quota = max($MIN_EXPANSION_QUOTA,
    # $mail_size*$MIN_EXPANSION_FACTOR,
    # min($MAX_EXPANSION_QUOTA, $mail_size*$MAX_EXPANSION_FACTOR))
    # In plain words (later condition overrules previous ones):
    # allow MAX_EXPANSION_FACTOR times initial mail size,
    # but not more than MAX_EXPANSION_QUOTA,
    # but not less than MIN_EXPANSION_FACTOR times initial mail size,
    # but never less than MIN_EXPANSION_QUOTA
    $MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
    $MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
    $MIN_EXPANSION_FACTOR = 5; # times original mail size (must be specified)
    $MAX_EXPANSION_FACTOR = 500; # times original mail size (must be specified)
    # Section VII - External programs, virus scanners
    # Specify a path string, which is a colon-separated string of directories
    # (no trailing slashes!) to be assigned to the environment variable PATH
    # and to serve for locating external programs below.
    # NOTE: if $daemon_chroot_dir is nonempty, the directories will be
    # relative to the chroot directory specified;
    $path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';
    # Specify one string or a search list of strings (first match wins).
    # The string (or: each string in a list) may be an absolute path,
    # or just a program name, to be located via $path;
    # Empty string or undef (=default) disables the use of that external program.
    # Optionally command arguments may be specified - only the first substring
    # up to the whitespace is used for file searching.
    $file = 'file'; # file(1) utility; use 3.41 or later to avoid vulnerability
    $gzip = 'gzip';
    $bzip2 = 'bzip2';
    $lzop = 'lzop';
    $uncompress = ['uncompress', 'gzip -d', 'zcat'];
    $unfreeze = ['unfreeze', 'freeze -d', 'melt', 'fcat'];
    $arc = ['nomarch', 'arc'];
    $unarj = ['arj', 'unarj']; # both can extract, same options
    $unrar = ['rar', 'unrar']; # both can extract, same options
    $zoo = 'zoo';
    $lha = 'lha';
    $cpio = 'cpio';
    # SpamAssassin settings
    # $sa_local_tests_only is passed to Mail::SpamAssassin::new as a value
    # of the option local_tests_only. See Mail::SpamAssassin man page.
    # If set to 1, no tests that require internet access will be performed.
    $sa_local_tests_only = 1; # (default: false)
    #$sa_auto_whitelist = 1; # turn on AWL (default: false)
    $sa_mail_body_size_limit = 64*1024; # don't waste time on SA if mail is larger
    # (less than 1% of spam is > 64k)
    # default: undef, no limitations
    # default values, can be overridden by more specific lookups, e.g. SQL
    $sa_tag_level_deflt = -999; # add spam info headers if at, or above that level
    $sa_tag2_level_deflt = 3.0; # add 'spam detected' headers at that level
    $sa_kill_level_deflt = 22.0;
    #$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
    # at or above that level: bounce/reject/drop,
    # quarantine, and adding mail address extension
    # The $sa_tag_level_deflt, $sa_tag2_level_deflt and $sa_kill_level_deflt
    # may also be hashrefs to hash lookup tables, to make static per-recipient
    # settings possible without having to resort to SQL or LDAP lookups.
    # a quick reference:
    # tag_level controls adding the X-Spam-Status and X-Spam-Level headers,
    # tag2_level controls adding 'X-Spam-Flag: YES', and editing Subject,
    # kill_level controls 'evasive actions' (reject, quarantine, extensions);
    # it only makes sense to maintain the relationship:
    # tag_level <= tag2_level <= kill_level
    # string to prepend to Subject header field when message exceeds tag2 level
    $sa_spam_subject_tag = '*** JUNK MAIL ***'; # (defaults to undef, disables)
    # (only seen when spam is not to be rejected
    # and recipient is in local_domains*)
    $sa_spam_modifies_subj = 1; # may be a ref to a lookup table, default is true
    # Example: modify Subject for all local recipients except [email protected]
    #$sa_spam_modifies_subj = [qw( [email protected] . )];
    # @av_scanners is a list of n-tuples, where fields semantics is:
    # 1. av scanner plain name, to be used in log and reports;
    # 2. scanner program name; this string will be submitted to subroutine
    # find_external_programs(), which will try to find the full program
    # path name; if program is not found, this scanner is disabled.
    # Besides a simple string (full program path name or just the basename
    # to be looked for in PATH), this may be an array ref of alternative
    # program names or full paths - the first match in the list will be used;
    # As a special case for more complex scanners, this field may be
    # a subroutine reference, and the whole n-tuple is passed to it as args.
    # 3. command arguments to be given to the scanner program;
    # a substring {} will be replaced by the directory name to be scanned,
    # i.e. "$tempdir/parts"
    # 4. an array ref of av scanner exit status values, or a regexp (to be
    # matched against scanner output), indicating NO VIRUSES found;
    # 5. an array ref of av scanner exit status values, or a regexp (to be
    # matched against scanner output), indicating VIRUSES WERE FOUND;
    # Note: the virus match prevails over a 'not found' match, so it is safe
    # even if 4. matches for viruses too;
    # 6. a regexp (to be matched against scanner output), returning a list
    # of virus names found.
    # 7. and 8.: (optional) subroutines to be executed before and after scanner
    # (e.g. to set environment or current directory);
    # see examples for these at KasperskyLab AVP and Sophos sweep.
    # NOTES:
    # - NOT DEFINING @av_scanners (e.g. setting it to empty list, or deleting the
    # whole assignment) TURNS OFF LOADING AND COMPILING OF THE ANTIVIRUS CODE
    # (which can be handy if all you want to do is spam scanning);
    # - the order matters: although _all_ available entries from the list are
    # always tried regardless of their verdict, scanners are run in the order
    # specified: the report from the first one detecting a virus will be used
    # (providing virus names and scanner output); REARRANGE THE ORDER TO WILL;
    # - it doesn't hurt to keep an unused command line scanner entry in the list
    # if the program can not be found; the path search is only performed once
    # during the program startup;
    # CORROLARY: to disable a scanner that _does_ exist on your system,
    # comment out its entry or use undef or '' as its program name/path
    # (second parameter). An example where this is almost a must: disable
    # Sophos 'sweep' if you have its daemonized version Sophie or SAVI-Perl
    # (same for Trophie/vscan, and clamd/clamscan), or if another unrelated
    # program happens to have a name matching one of the entries ('sweep'
    # again comes to mind);
    # - it DOES HURT to keep unwanted entries which use INTERNAL SUBROUTINES
    # for interfacing (where the second parameter starts with \&).
    # Keeping such entry and not having a corresponding virus scanner daemon
    # causes an unnecessary connection attempt (which eventually times out,
    # but it wastes precious time). For this reason the daemonized entries
    # are commented in the distribution - just remove the '#' where needed.
    @av_scanners = (
    # ### http://www.vanja.com/tools/sophie/
    # ['Sophie',
    # \&ask_daemon, ["{}/\n", '/var/run/sophie'],
    # qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
    # qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
    # ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
    # ['Sophos SAVI', \&sophos_savi ],
    # ### http://clamav.elektrapro.com/
    # ['Clam Antivirus-clamd',
    # \&ask_daemon, ["CONTSCAN {}\n", '/var/amavis/clamd'],
    # qr/\bOK$/, qr/\bFOUND$/,
    # qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
    # # NOTE: run clamd under the same user as amavisd,
    # # match the socket name in clamav.conf to the socket name in this entry
    # ### http://www.openantivirus.org/
    # ['OpenAntiVirus ScannerDaemon (OAV)',
    # \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
    # qr/^OK/, qr/^FOUND: /, qr/^FOUND: (.+)/ ],
    # ### http://www.vanja.com/tools/trophie/
    # ['Trophie',
    # \&ask_daemon, ["{}/\n", '/var/run/trophie'],
    # qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
    # qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
    # ### http://www.f-prot.com/
    # ['FRISK F-Prot Daemon',
    # \&ask_daemon,
    # ["GET {}/*?-dumb%20-archive HTTP/1.0\r\n\r\n",
    # ['127.0.0.1:10200','127.0.0.1:10201','127.0.0.1:10202',
    # '127.0.0.1:10203','127.0.0.1:10204'] ],
    # qr/(?i)<summary[^>]*>clean<\/summary>/,
    # qr/(?i)<summary[^>]*>infected<\/summary>/,
    # qr/(?i)<name>(.+)<\/name>/ ],
    ['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp','kavscanner'],
    "-* -P -B -Y -O- {}", [0,3,8], [2,4], # any use for -A -K ?
    qr/infected: (.+)/,
    sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
    sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
    ['KasperskyLab AVPDaemonClient',
    [ '/opt/AVP/kavdaemon', 'kavdaemon',
    '/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
    '/opt/AVP/AvpTeamDream', 'AvpTeamDream',
    '/opt/AVP/avpdc', 'avpdc' ],
    '{}', [0,8], [3,4,5,6], qr/infected: ([^\r\n]+)/ ],
    # change the startup-script in /etc/init.d/kavd to:
    # DPARMS="-I0 -Y -* /var/amavis"
    # adjusting /var/amavis above to match your $TEMPBASE.
    # NOTE: cd /opt/AVP/DaemonClients; configure; cd Sample; make
    # cp AvpDaemonClient /opt/AVP/
    ### http://www.hbedv.com/ or http://www.centralcommand.com/
    ['H+BEDV AntiVir or CentralCommand Vexira Antivirus',
    ['antivir','vexira'],
    '--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/,
    qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
    (?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/ ],
    # NOTE: remove the -z if you only have a demo version
    ### http://www.commandsoftware.com/
    ['Command AntiVirus for Linux', 'csav',
    '-all -archive -packed {}', [50], [51,52,53],
    qr/Infection: (.+)/ ],
    ### http://www.symantec.com/
    ['Symantec CarrierScan via Symantec CommandLineScanner',
    ['cscmdline','savsecls'],
    '-a scan -i 1 -v -s 127.0.0.1:7777 {}',
    qr/Files Infected: 0/, qr/^Infected: /,
    qr/Info:\s+(.+)/ ],
    ### http://drweb.imshop.de/
    ['DrWeb Antivirus for Linux/FreeBSD/Solaris', 'drweb',
    '-al -ar -fm -go -ha -ml -ot -sd -up {}',
    [0], [1], sub {('no-name')} ],
    ### http://www.f-secure.com/products/anti-virus/
    ['F-Secure Antivirus', 'fsav',
    '--dumb --archive {}', [0], [3,8],
    qr/(?:infection|Infected): (.+)/ ],
    ['CAI InoculateIT', 'inocucmd',
    '-sec -nex {}', [0], [100],
    qr/was infected by virus (.+)/ ],
    ['MkS_Vir for Linux (beta)', ['mks32','mks'],
    '-s {}/*', [0], [1,2],
    qr/--[ \t]*(.+)/ ],
    ['MkS_Vir daemon',
    'mksscan', '-s -q {}', [0], [1..7],
    qr/^... (\S+)/ ],
    ### http://www.nod32.com/
    ['ESET Software NOD32', 'nod32',
    '-all -subdir+ {}', [0], [1,2],
    qr/^.+? - (.+?)\s*(?:backdoor|joke|trojan|virus|worm)/ ],
    ### http://www.nod32.com/
    ['ESET Software NOD32 - Client/Server Version', 'nod32cli',
    '-a -r -d recurse --heur standard {}', [0], [10,11],
    qr/^\S+\s+infected:\s+(.+)/ ],
    ### http://www.norman.com/products_nvc.shtml
    ['Norman Virus Control v5 / Linux', 'nvccmd',
    '-c -l:0 -s -u {}', [0], [1],
    qr/(?i).* virus in .* -> \'(.+)\'/ ],
    ### http://www.pandasoftware.com/
    ['Panda Antivirus for Linux', ['pavcl','pavc'],
    '-aut -aex -heu -cmp -nor -nso -eng {}',
    qr/Number of files infected\.*: 0(?!\d)/,
    qr/Number of files infected\.*: 0*[1-9]/,
    qr/Found virus :\s*(\S+)/ ],
    # Check your RAV license terms before fiddling with the following two lines!
    # ['GeCAD RAV AntiVirus 8', 'ravav',
    # '--all --archive --mail {}', [1], [2,3,4,

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • How Do I Configure the PFI Lines as input in PXI 6713 module

    Hi,
    I have PXI 6713 module in my PXI 1044 chassis. I have configured PXI 6713 module to geneate certain analogue signals to my board.
    Board inturn process this analogue signal and responds back the status signals through a status register on the board. In my application,the status bits in status register of  the board are mapped to the PFI 0:3 bits on PXI 6713 module ( pins 11,10 , 42 and 43).
    My query is how do i configue the PFI lines as input in PXI 6713 module to read these status bits ??
    May be below explanation could give you little bit more information w.r.to my query.
    When i use NI USB - 6008    module to read the same bits , since this device has 12 digital I/O lines, i could able to read the status bits in to the last 4 digital lines by configuring the those digital lines as input.
    In PXI 6713  module i have only 8 digital lines. These 8 digital lines i have used to send the digital signals to the board. I am left with no digital I/O lines. Hence i couldn't use these digital lines. I am left with only one option to use. Theya re PFI lines. Moreover the status bits in the pin out of board are mapped such that the bits can be read through the PFI lines.
    I am wondering do we have any example code to use  inorder to read these status bits on the board using the PFI lines.
    Please let me know if you need additional information to help me out.
    Thanks.
    Solved!
    Go to Solution.

    Hello There,
    When using the PFI pin as an input, you can individually configure each PFI for edge or level detection and for polarity selection.  This PFI information can be referenced in the DAQ Analog Output Series Manual on page 6-1 (http://www.ni.com/pdf/manuals/370735e.pdf).  Unfortunately, the PXI-6713 PFI lines are only capable of timing input and output signal for AI, AO, or counter/timer functions.  The option of creating static DI from the PFI lines is not available for the PXI-6713. However, some cards have this capability.  Newer National Instruments products with PFI lines have the option of setting PFI lines as:
    Static Digital Input 
    Static Digital Output
    Timing Input Signal for AI, AO, DI, DO, or counter/timer functions 
    Timing Output Signal from AI, AO, DI, DO, or counter/timer functions
    (http://digital.ni.com/public.nsf/allkb/14F20D79C649F8CD86256FBE005C2BC4)
    When set as static DIO, the PFI lines are assigned to a different port (eg. PFI0-7 is Port1).  More details about this can be referenced at:
    http://digital.ni.com/public.nsf/allkb/DA2D3CD0B8E8EE2A8625752F007596E1
    http://digital.ni.com/public.nsf/allkb/862567530005F09E8625677800577C27
    Regards,
    Roman Sandoval | National Instruments | RF Systems Engineer

  • OSS crashes

    Hi
    Sound broken in Gnome with OSS. Every sound hangs and sounds like it was a helicopter  flying around. Restarting OSS fixes if, but the problem is right back.
    pacman.log:
    [2010-01-17 15:40] synchronizing package lists
    [2010-01-17 15:41] starting full system upgrade
    [2010-01-17 15:41] starting full system upgrade
    [2010-01-17 15:41] upgraded expat (2.0.1-4 -> 2.0.1-5)
    [2010-01-17 15:41] warning: /etc/group installed as /etc/group.pacnew
    [2010-01-17 15:41] adding new group: rfkill
    [2010-01-17 15:41] upgraded filesystem (2009.11-1 -> 2010.01-1)
    [2010-01-17 15:42] upgraded libraw1394 (2.0.4-1 -> 2.0.5-1)
    [2010-01-17 15:42] upgraded mpc (0.18-1 -> 0.19-1)
    [2010-01-17 15:42] upgraded picard (0.12.1-1 -> 0.12.1-2)
    [2010-01-17 15:42] upgraded smbclient (3.4.4-1 -> 3.4.4-1.1)
    [2010-01-17 15:42] upgraded samba (3.4.4-1 -> 3.4.4-1.1)
    [2010-01-17 15:42] upgraded xfsprogs (3.0.5-1 -> 3.1.0-1)
    dmesg:
    irq 17: nobody cared (try booting with the "irqpoll" option)
    Pid: 0, comm: swapper Not tainted 2.6.32-ARCH #1
    Call Trace:
    [<c108a244>] ? __report_bad_irq+0x24/0x90
    [<c108a400>] ? note_interrupt+0x150/0x190
    [<c108ab5b>] ? handle_fasteoi_irq+0xab/0xd0
    [<c10064e5>] ? handle_irq+0x15/0x30
    [<c1005a57>] ? do_IRQ+0x47/0xc0
    [<c1035543>] ? select_nohz_load_balancer+0x53/0x140
    [<c10040d0>] ? common_interrupt+0x30/0x38
    [<c100b0ed>] ? mwait_idle+0x4d/0xc0
    [<c1002904>] ? cpu_idle+0x94/0xe0
    [<c13e285d>] ? start_kernel+0x335/0x33a
    [<c13e2366>] ? unknown_bootoption+0x0/0x190
    handlers:
    [<f1fdcb00>] (osscore_intr+0x0/0x60 [osscore])
    Disabling IRQ #17
    osscore: Output timed out (sync) on audio engine 1
    199595 fifo errors were detected
    38 fifo errors were detected
    42 fifo errors were detected
    rc.conf:
    MOD_AUTOLOAD="yes"
    MODULES=(!soundcore)
    DAEMONS=(syslog-ng dbus hal network oss ntpdate ntpd @mpd @pcscd @openct)
    local/oss 4.2_2002-2
        Open Sound System UNIX audio architecture
    [hit@sahver ~]$ groups
    wheel dbus video audio optical floppy storage camera power hit samba sambashare input
    Then booted with "irqpoll" option, dmesg:
    osscore: Audio engine 1: Internal error in channel setup, err=-11008, ch=158258432
    175518 fifo errors were detected
    osscore: Output timed out (sync) on audio engine 1
    380907 fifo errors were detected
    osscore: Audio engine 1: Internal error in channel setup, err=-3328, ch=147256064
    osscore: Output timed out on audio engine 2/'Intel ICH5 (24D5) (vmix)' (count=0)
    osscore: Output timed out on audio engine 2/'Intel ICH5 (24D5) (vmix)' (count=757760)
    osscore: Output timed out (sync) on audio engine 1
    326953 fifo errors were detected
    "irqpoll" seems to get rid of OSS crashes, but i.e java applications (various games) in firefox make the system terribly slow and using them (apps) impossible.
    Last edited by hit (2010-01-17 17:44:05)

    Fresh install and still stuck on it!

  • Debugging Outbound Function module in EDI

    Hello All,
    I have a query regarding debugging function module which is used for creation of outbound Idoc for Purchase Order.
    We have a Z process code which is assigned to a Z function module which creates an IDOC while a PO is created in the system.
    But If I set break points in the Function module, the execution does stop there.
    Can any one please tell me how to debug outbound processing Functioon module while PO is created.
    Regards
    Arindam

    Hi,
    There are 2 ways to to debug an outbound idoc triggered by an output type. One way is to set the output timing to 1, and save the purchase order and then execute RSNAST00 which will take the control to the breakpoint.
    You can also debug the idoc with the output timing set as 4.
    Here the idoc is triggered in update mode. Hence any breakpoints you may have set before will not reflect. Hence you need to activate update debugging.
    Below are the steps for the same..
    1. Add the output type in purchase order.
    2. Enter '/h' to activate debugging in transaction window.
    3. Save purchase order.
    4. The process enters debugging mode.
    5. In Settings tab, select checkbox for Update Debugging.
    6. Click F8.
    7. The control will appear to go out and re-enter debugging mode.
    8. Now from the menu bar, in breakpoints option, choose Breakpoint At Function Module option, and give the name of the function module which is processing the idoc.
    9. Once breakpoint set, click F8.
    10. The control will now go to the function module. You can then debug the FM.
    Hope this information is helpful.

  • Emulatorsession list failed

    With the command "tarantella emulatorsession list" obtained this output:
    Timed out while waiting for reply from the JServer.
    In the logs appear :
    Tarantella Enterprise 3 (3.4) ERROR:
    Listing of emulator sessions failed.
    javax.naming.PartialResultException: Dereference failed [Root exception is javax
    .naming.NameNotFoundException: ErrDoesNotExist]
    at com.sco.tta.common.jndi.provider.views.ViewSearchEnumeration$LeafNode
    .getSearchResult(ViewSearchEnumeration.java:475)
    at com.sco.jndi.toolkit.search.AbstractSearchEnumeration.hasMore(Abstrac
    tSearchEnumeration.java:301)
    at com.sco.tta.server.soapcommands.ListSessions.emulator(ListSessions.ja
    va:413)
    at sun.reflect.GeneratedMethodAccessor75.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sco.tta.server.server.soap.SOAPControlledElement.invoke(SOAPContr
    olledElement.java:95)
    at com.sco.tta.server.server.soap.SOAPController.invoke(SOAPController.j
    ava:176)
    at com.sco.tta.server.server.soap.SOAPCalcTask.processEnvelope(SOAPCalcT
    ask.java:180)
    at com.sco.tta.server.server.CalcTask.runTask(CalcTask.java:125)
    at com.sco.tta.server.server.Task.run(Task.java:122)
    at com.sco.cid.common.WorkerPool$Worker.run(WorkerPool.java:524)
    at java.lang.Thread.run(Thread.java:534)
    Caused by: javax.naming.NameNotFoundException: ErrDoesNotExist
    at com.sco.tta.common.asadutils.AsadConvert.mapFromAsadError(AsadConvert
    .java:1138)
    at com.sco.tta.common.asadutils.AsadConvert.mapFromAsadError(AsadConvert
    .java:1078)
    at com.sco.jndi.provider.asadpeer.AbstractAsadContext.handleError(Abstra
    ctAsadContext.java:1724)
    at com.sco.jndi.provider.asadpeer.AbstractAsadContext.lookupAbsoluteObj(
    AbstractAsadContext.java:1090)
    at com.sco.jndi.provider.asadpeer.AbstractAsadContext.lookupAbsoluteCtx(
    AbstractAsadContext.java:1034)
    at com.sco.jndi.provider.asadpeer.AbstractAsadContext.lookupAbsoluteCtx(
    AbstractAsadContext.java:1015)
    at com.sco.jndi.provider.asadpeer.AbstractAsadContext.lookupRelativeCtx(
    AbstractAsadContext.java:996)
    at com.sco.jndi.provider.asadpeer.AbstractAsadContext.lookup(AbstractAsa
    dContext.java:370)
    at com.sco.jndi.provider.asadpeer.PeerServerContext.pc_lookup(PeerServer
    Context.java:275)
    at com.sco.jndi.toolkit.provider.PartialCompositeContext.lookup(PartialC
    ompositeContext.java:223)
    at com.sco.jndi.provider.asadpeer.PeerServerContext.lookup(PeerServerCon
    text.java:229)
    at com.sco.jndi.toolkit.provider.ToolkitContext.nns_lookup(ToolkitContex
    t.java:2019)
    at com.sco.jndi.provider.junction.JunctionContext.lookup(JunctionContext
    .java:154)
    at com.sco.jndi.toolkit.provider.ToolkitContext.nns_lookup(ToolkitContex
    t.java:2019)
    at com.sco.jndi.provider.junction.JunctionContext.lookup(JunctionContext
    .java:154)
    at com.sco.jndi.toolkit.provider.ToolkitContext.nns_lookup(ToolkitContex
    t.java:2019)
    at com.sco.jndi.toolkit.provider.PartialCompositeContext.lookup(PartialC
    ompositeContext.java:225)
    at com.sco.jndi.toolkit.provider.ToolkitContext.nns_lookup(ToolkitContex
    t.java:2019)
    at com.sco.jndi.provider.junction.JunctionContext.lookup(JunctionContext
    .java:154)
    at com.sco.jndi.toolkit.provider.BaseContext.lookup(BaseContext.java:103
    6)
    at com.sco.jndi.factory.InitialContextObjectFactory.getObjectInstance(In
    itialContextObjectFactory.java:77)
    at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:3
    01)
    at com.sco.jndi.toolkit.provider.BaseContext.getObjectInstance(BaseConte
    xt.java:266)
    at com.sco.jndi.toolkit.provider.BaseContext.getObjectInstance(BaseConte
    xt.java:171)
    at com.sco.tta.common.jndi.provider.views.ViewSearchEnumeration$LeafNode
    .getSearchResult(ViewSearchEnumeration.java:461)
    ... 12 more
    Emulator sessions were not fully listed.
    Re-try to fully list the emulator sessions.
    Anybody knows about this error?Thanks.

    That is a well known bug with SAP MMC. Next time you open SAP MMC, and you go to close it, make sure your last action was not looking at the Process List - open the syslog or whatever but get out of that Process List BEFORE you close the SAP MMC session.
    Next time you open the SAP MMC, you won't get that message.

  • Creating and controlling a sine wave

    I am a TA for Control Systems & Instrumentation at Texas State University. As the assistant I am required to assist students in their homeworks and projects. I have encountered a problem in assisting the students. How do I create a Sine Wave wit ha sampling frequency of 200 Hz? Obtain the power spectrum of the signal and change the sine wave frequency to 25 Hz. Determine if the resulting frequency is about the Nyquist frequency. Then increase the sine wave to 125 Hz and compare to the Nyquist frequency again.

    There is an example shipped with LabVIEW 2009 called "Resampling a Waveform (continuous).vi" I think this vi will demonstrate what you are trying to do. Change the sine wave frequency using the frequency control in the Test Signals (A) box and change the sampling frequency by updating the output rate control in the Output timing box. You will then see the original waveform spectrum at the original sampling rate (Fs) and the re-sampled spectrum will be shown in red so you can see the shift.
    Systems Test Engineer
    Certified LabVIEW Architect (CLA)

Maybe you are looking for

  • Eyedropper in PS CS6 picking wrong color

    My eyedropper started picking the wrong color!  I ahve reset and reinstalled PS - and still have this problem.  No matter what color I click the eyedropper on, it picks a shade darker than what I want.  Anyone have any ideas?  Like I said, I am runni

  • External Hard Drives and Time Machine

    I have all my music stored on an external hard drive. The drive shows up on Time Machine Preferences as a "Do Not Back Up" and the minus button is grey so I don't seem to be able to take it off the list and back it up on Time Machine. Any suggestions

  • Diagnostics and Agent Questions

    Hi We are currently installing the agents and need info onfollowing for our production installs: Version of Solution manager 7 sp19 1) If i have a single server with 2 sap systems: ECC and GTS, which of this agents do I have to install for each syste

  • F110 problem again .....

    Hi FICO Gurus, I am a new student in FICO, here i have a question as following, ask for help, have sent this thread before. but not got the solution, just paste the log also. 1. create a vendor invoice via FB60, put invoice date as today . 2. clearin

  • Route determination problem in Stock transport order

    Hi, At present,i am using the plant 0001 and storage location 0001.It is determining the Route as 000001.When i changed it in STO to 000002.It is automatically coming back to old one. How to change it to 000002? If we need to any customizing,please t