Output to 16:9 for iPod

When I use Convert using Quicktime, I have difficulty getting it to preserve the 16:9 HDV 1080i format for output.
Basically I want to create a .MOV file with the correct apsect ratio for download from the web. I also want to generate another .MOV file for the corresponding PodCast.
When I use the converter in FCP, it compresses the image into 4:3.
In the Sequence Settings the 16:9 ratio is displayed but Anamorphic is NOT checked. Do I need to check that and if so, will I need to do this with each new 16:9 project?

Bob -- try this workflow on a small piece and see if it doesn't work for you...
File - Export - Quicktime Conversion - make sure it's set for Quicktime Movie export.
Change compression method to BROADBAND HIGH. THEN click OPTION and then SIZE... change size to 480x270 and click out to save.
Let it run.
Then, open THAT in iTunes and using iTunes, select the video file and right click (control-click) and choose 'convert for iPod.'
That's always worked for me.
When you are done, do another right click on the video file in iTunes and do a SHOW FILE IN FINDER (or something like that.) Look for the .m4v file... that's the iPod video one. Open it up and see if it isn't 16:9.
Good luck,
CaptM

Similar Messages

The best output device for iPod?

Hallo Everybody,
Somedays ago I have seen an heard the T+A Caruso(http://www.taelektroakustik.de/deu/ta2/caruso/caruso.htm). This was it! Yes! Internetradio, CD and iPod in a perfect Combination of Sound! - and then the cold shower - 1700 Euro not $!
Who know a ultimative solution under this price?
DENON S52 is it not! no sound calibration!

You can connect an iPod to any sound system. So the best "output device for iPod" is the same as the +best output device, period.+
I'm told you get better sound (for the purpose of feeding into a sound system) if you connect the audio output through the docking connector, instead of from the headphone jack. You get +line level audio out+ like with other audio system components.
You can do so if you have a Docking Station device with a stereo jack, or if you get a cable like this one.
[Example of cable with docking connector and mini-stereo jack|http://www.restockit.com/Cables-To-Go-IPod-Audio-Cable-Apple-Dock-Connecto r-Mini-phone-Stereo-3-5-Mm-M-White-(73679B).html?source=froogle&Bvar5=100F1&Bvar 6=100F1&Bvar7=100F1]

HT2537 Apple charger for iPod.... Output Power 12 V ???????

Apple charger for iPod.... Output Power
12 V??????

Newer USB charger output is 5.1 volts. Older FireWire chargers would be 12 volts or higher.

Want to output video for iPod - with subtitles set in DVDSP

Ok, now that the DVD is done, I would like to make some downloadable tracks that would be optimized for iPod (640x480). I can easily export the tracks from Final Cut Pro using compressor, but then I don't get the subtitles.
Is there a clever way to
- get the subtitles I have in the DVDSP project back to Final Cut OR
- import the .STL files into Final Cut OR
- export to iPod from DVDSP with only one of three subtitle streams?

There is now a new discussion on this same subject here on the DVDSP forum (dvdsp3 subtitles -> .mov/.mp4), and so far, the only solution seems to be ripping the DVD with Handbrake.
It's a shame there's neither an easy subtitling solution in Final Cut nor an export option in DVDSP.

Comparison for iPod Users: Free Online Converter & DVD to iPod Converter

Compare two channels of obtaining video sources for iPod: one is using online converter, the other is DVD to iPod Converter. After the general introduction of the two methods, I will analyze their advantages and disadvantages for you to choose according to your need.
Part One: Enjoy YouTube (online videos) on iPod
Instruction: a useful website to convert online video freely: http://www.vixy.net/
For vixy, you can just copy the URL of the online video into the âURLâ blank of the vixy, then choose the format you want to convert to. Click âStartâ. For a short time, the conversion will be finished. You can click the âDownload the converted videoâ to restore the file.
http://www.aiseesoft.com/images/guide/vixy.jpg
Advantages: Free online video converter. No software to install. Only a few clicks you can get the converted file after a short while. The most important thing is that online video sources are numerous and original, so you can get the first-hand sources in time through it. Some personal DVs are also shared with you.
Disadvantages: They set limitation of the length and size of the video. The classical movies usually are not on line available. Even if existed, the quality of image and sound is inferiors.
Part Two: Enjoy DVD movies on iPod Touch, iPod Nano, iPod Classic, iPhone, iPhone (3G), Apple TV
We usually bought classical DVD movies for collection or regular watching later, but DVD cannot be copied directly into iPod for us to appreciate it at anytime and anywhere. On this occasion, we need to convert DVD to the format, video and audio settings (Resolution, Bitrate, Frame Rate, etc) supported by your iPod player.
Instruction: the way to convert DVD to iPod: using Aiseesoft DVD to iPod Converter http://www.aiseesoft.com/dvd-to-ipod-converter.html
Install and run Aiseesoft DVD to iPod Converter
http://www.aiseesoft.com/download/dvd-to-ipod-converter.exe
http://www.aiseesoft.com/images/guide/screen.gif
Step 1: Click âLoad DVDâ button to import your DVD
Step 2: Use âProfileâ drop-down list to choose your output format.
Step 3: Click âSettingsâ for setting your video parameters.
At last click âStartâ button to start your conversion.
More tips:
1. Merge into One File
If you want to merge the selected contents into one file you can check the "Merge into one file" option. As default the merged file is named after the first selected file (either a title or a chapter)
2. Movie Effect
You can set the brightness, contrast, saturation of the video and volume of the audio.
3. Trim Movie
It can help you to capture the segment of your movie.
http://www.aiseesoft.com/images/guide/dvd-to-ipod-thread-trim.jpg
4. Crop Video
You can remove black edge of your DVD movie and get any playing area of the video by using its "Crop Mode" function. You can also select "Zoom Mode" to extrude your video slightly to adjust to your portable devices so you can get the best video quality.
http://www.aiseesoft.com/images/guide/dvd-to-ipod-thread-crop.jpg
5. Take Snapshot
It allows you to capture your favorite pictures from your movie.
Advantages: In this way, you can make full use of your DVD: not only in DVD player, but your iPod player. The function of effecting and trimming allows you to clip the segment of the DVD movies complying with your will. You can enjoy more movies taking full advantage of your spare time while relaxing or traveling.
Disadvantages: DVD movies are usually popular, lacking of individualization. You can not share others' DVs.
With these two ways, we can enjoy the pleasure videos bring to us as much as we like. Have fun!

Depending on what update your iPod is, you may need
to dowload YAMB to make sure the videos play well on
your iPod. If you are watching a converted video on
your iPod and it freezes suddenly and this problem
continues, you need to download YAMB and convert the
files already converted with videora iPod converter
with YAMB, this will only take a few minutes.
I hope this helps you out.
Nope. All that a person with that problem should have to do is just update their iPod firmware to 1.1.1 with the newest updater, as that issue has been resolved in the latest firmware.

Tutorial: Converting Video for iPod (Read BEFORE You Post)

Since 1/2 the bandwidth is about the same question - how to convert (Filetype X) to iPod video (MPEG-4 or H264) - here is the simplest and FREE method using one piece of FREE software and the ability to do a bunch at a time in a batch process.
-------------------MPEG-4 CONVERSION FOR IPOD----------
Start with a muxed file, e.g. MPEG-1 or 2. I am starting with an MPEG-1 music video clip. Update: MPEG Streamclip 1.5 now accepts almost all video clips, AVI (with the right DIvX or 3ivX codecs installed) and QT. So open whatever you have in Streamclip and follow these steps:
Open in Streamclip
Select File Export to QT (or new setting: File Export to MPEG4)
Big window opens. Select the codec from the top pulldown- Apple MPEG-4 Compressor
Select 40% quality (this lowers the bit rate and makes the file smaller and conform - at 80% the file is 120MB vs. 10 MB at 40%) as you don't want huge files.
Under Sound Select AAC audio codec and 128 kbps
Under frame size pick 320X240
Click Make Movie and where it will go of course.
On my G5 a 3'46" MPEG-1 music video was converted to a 10.1 MB mov MPEG-4 file in about 25 seconds. With a single G4 that might be 3 minutes. Bitrate is: 370 kbps video and looks fine at the actual size in QT and will look OK on the similarly tiny iPod screen. I was quite impressed by quality for such a small movie. I could goose it up to 50% or 60% to see how bit it gets but it looks good at 40% There may be a sizeable increase in size per 10% increase so before btach processing 100 try one at 40 or 50%.
-----------IF YOU MUST HAVE H264------------
Open MPEG file in Streamclip: Select the (new) Export to H264 setting that doesn't crash like 1.3.1 did - or you can use these steps and see which is faster if at all. Which allow you to use the preset in QT Pro to export to iPod format (which is H264 and takes a long time).
Select Apple Animation as the codec for Compression at 100% quality
Same sound setting as above
Pick the frame size that says (Unscaled) next to it such as
352X240 is common for MPEG-1 videos.
Make Movie - this results a huge file. But you can get rid of it later.
Open that huge file in QT Pro.
Do file export and pick the preset at the bottom that is "Movie to iPod"
It will figure out the settings. It may (it will)take a while but you get a M4V file in H264. My clip done this way took about 40 seconds to the Animation step and about 10 minutes for the QT to H264 step.
--------------------BATCH PROCESSING-------------
Select the batch list - it opens, you add files as many as you like, select convert to Quicktime, then follow the step above once, select the destination directory and then start and it will do one after another in sequence. Note the preview window that opens is the actual post-processed file and you can see at roughly iPod size how it looks in real time or as fast as you can process anyway.

H.264 is going to be slow. No doubt about that. It's still a new codec so it's expected to take a while to compress versus MPEG-4.
I remembered when MP3 was still new ... my 233 MHz P2 machine was just chugging along.
When Ogg Vorbis came along, I would expect the encoding time to be somewhat slower. I was right to a point but that was when I have yet to own a computer that's 1 GHz.
The same deal with compression schemes. For instance, I have found RAR, StuffItX, and 7zip to take it's sweet time, if using the highest settings, compared to ZIP on max compression.
I expected no different with H.264, albeit the encoding time is a bigger difference compared to, say MP3 vs Ogg, but I have learned that when new codecs and compression schemes come by, I expect them to take longer than what I've been accustomed to as I used different machines. It's either that or I buy a faster computer. For the record, it takes me between 2.5~4 hours to convert a 24 minute video to H.264 using my iBook listed below, depending on the complexity of the video.
The quality of H.264 is rather nice for 320x240, sometimes even better than MPEG-4 using the same bitrate and resolution setting, but the output filesize is sometimes smaller than the H.264 cousin because it compresses rather well.
However, let me tell you that I'm rather spoiled when it comes to certain technologies. If the iPod says that it supports 2.5 Mbps MPEG-4, I'll use that setting first and then compare the visual quality of a 768 kbps H.264 file. Most of the time though, the DVDs I've encoded doesn't even come near 2.5 Mbps. It's more like 500~1500 kbps.
Personally, I usually stick at 100% quality and use the Limit Data Rate feature. It's just that I get annoyed even by the smallest artifacts on portable video and the less artifacts I see, the less annoyed I get.
Just thought I'd share my 2 cents.

What is the best way to format Videos for ipod touch?

What is the best way to format Videos for ipod touch? Used Quicktime Pro/ Export (iPhone setting). Videos aren't as crisp as downloaded Videos. Compressors /ipod video Setting also looks crapy (with bitrate med & High). What should I use?

Visualhub is a transcoder with multiple input and output formats with specific setting for iPod,iPod touch. Costs around $19-used to work great but recently everything I convert suffers audio crash than closes out the player. Hopefully they will fix it.
Elgato H.264 hardware transcoder is $99 dollars(USB stick that plugs in to Mac)-speeds up encoding of any file quicktime can handle, settings for apple tv, iphone/touch, ipod,Sony PSP. Worth the cost if you transcode a lot of video for the Touch or own an elgato HD tuner. Files work flawlessly and look great.
Mpeg streamclip-free. Works great, has presets or can customize the output.

Exporting video for iPod - audio OK but video is "white"

I know this issue has been raised before but I cannot find a clear resolution anywhere - happy to be pointed to the right place.
Some time ago I converted some old VHS home movies to DVD and they play fine. To view them via AppleTV I've converted them to MP4 using H.264/AAC via MEGUI, and they work fine in iTunes on the PC and on AppleTV.
Once they were in iTunes I tried converting them for iPod but the output is a blank white video screen though the audio is fine.
To diagnose the problem I tried loading the MP4 version directly into Quicktime (Version 7.6.8)where the play fine. Then I tried exporting them for iPod and I get the same white screen plus audio.
I've seen this issue dismissed as due to some form of DRM but I doubt that is the case here. The video is my own, the DVDs I created are not CSS protected and the MP4s are also unprotected.
I've also seen it attributed to a missing codec, but that is unlikely given both iTunes and Quicktime play the videos without a hitch.
Any clues on how to proceed?
John

Last post before I leave things alone for a while.
I've uninstalled and reinstalled iTunes and Quicktime and iTunes no longer chews up lots of CPU when trying to convert one particular Quicktime created file.
I've also recreated each file again from the same source, the AVI encoded as DV-PAL with screen res of 720x576. I created a series of test cases to try to pin the problem down and I think the best exposition is the following -
The problem
An MPEG4 file exported from Quicktime loads and plays in iTunes, plays on AppleTV and can be converted for iPod.
An almost identical MPEG4 file created by MEGUI using the x264 encoder, latest build 1649, and all the same settings as Quicktime loads and plays in iTunes, plays on AppleTV but when converted for iPod produces a file with audio but the video is "white". Looking at the file size, less than 2mb, it is pretty obvious that the video stream is simply not there.
Clues
Quicktime Movie Inspector reports the screen resolution of the file it exported as 720x540 while for the MEGUI created file it reports a very odd 787x576. Note that Windows Media Player and YAMB (MP4Box utility) both report this same file as 720x576 which is what I would expect as MEGUI did not resize the video. As an aside, WMP and YAMB also report the Quicktime created file as 720x540 so they agree with Quicktime on that score at least.
Obvious Question
Why does Quicktime report an incorrect screen resolution, and is this contributing to the conversion problem in iTunes?
My understanding is that MPEG4 uses 16x16 macroblocks and so the dimensions of anything to be encoded must be in multiples of 16 and 787 is not a multiple of 16.
Of course, the 787x576 screen resolution could be a red herring.
Details from Quicktime Movie Inspector follow:
File that converts successfully
Source: scene0005c created QT as MPEG4.mp4
Format: AAC, Stereo (L R), 48.000 kHz
H.264, 720x540, Millions
Movie FPS: 25.00
Playing FPS: 25.00
Data Size: 31.32 MB
Data Rate: 2.39 mbits/sec
Current Time: 00:00:00.00
Duration: 00:01:49.84
Normal Size: 720x540
Current Size: 720x540
File that does not convert successfully
Source: scene0005e created MEGUI as MPEG4 AAC-LC 320Kbps.mp4
Format: H.264, 787x576, Millions
AAC, Stereo (L R), 48.000 kHz
Movie FPS: 25.00
Playing FPS: 25.00
Current Time: 00:00:00.00
Duration: 00:01:49.89
Normal Size: 787x576
Current Size: 787x576

Compression settings for iPods?

I have some native 640x480 .mov files that my client wants me to make available for download from their web site so that their clients can load them on their video capable iPods.
What are the best settings/format for me to use in Compressor?

Open the settings and put ipod into the search filed, you'll see the two presets ready to go.
From the compressor manual:
H.264 Workflows for iPod and Apple TV
The efficiency and quality of H.264 creates a number of options for iPod and Apple TV
video producers:
Â Compressor includes two video sizes specifically designed for playback on an iPod: iPod
320 (QVGA) and iPod 640 (VGA). Both sizes create output media files that are
compatible for playing on an iPod, and both will look good on the display of the iPod.
Â As long as you intend the output media files to be viewed on the iPod itself, you
can use the iPod 320 encoder size, which produces files that are about one half the
size of the iPod 640 encoder size.
Â If you expect the output media files to be played on larger displays, whether in
iTunes or on a monitor connected to an iPod, you should use the iPod 640 encoder
size with its higher quality.
Â If you have assigned chapter markers to the video using the Preview window, iTunes
will automatically use the first marker as the poster frame. If you assigned an image
to any markers in Compressor, the first marker with an image becomes the poster
frame in iTunes. You can change the poster frame in iTunes if necessary. See the
iTunes help for more information. See “Adding Chapter or Podcast Markers to a Clip”
on page 300 for more information about adding chapter markers in Compressor.
Â The Apple TV HD encoder size produces video files that are about four times the size
of the iPod 640 encoder size. These are not compatible with iPod playback and may
not play smoothly on older Macintosh computers.
bogiesan

Suggest Best headphone for iPod Touch

Hi,
Recently I bought iPod Touch 4G. It now 5 months old, but the bad thing about apple is its headphone. After using apple standard headphone, now i am feel degrading the sound quality i.e. the loudness of output has reduced when i compare to the now headphones. Could some one suggest best In Ear Head phone for iPod Touch.

I have been using Ultimate ears for years and am very happy with them.

Convert for iPod vs Apple TV

Movies from the iTunes store play on both iPods and Apple TV but I have some non-iTunes movies that I need to convert so they will play. I didn't realize there was a difference between the video destined for iPods vs Apple TV. What exactly is the difference between these two conversion commands under the Advanced menu in iTunes?

The following is from: http://www.apple.com/itunes/store/podcaststechspecs.html#formattingvideo
You format any video for iPod or Apple TV the same way. It used to be a slightly different story, but now however, they recommend not modifying specifically for iPod. The specs below should enlighten you...
Formatting Video for the iPod, the iPhone or Apple TV
Back to top
Although iTunes can play a variety of .mp4, .m4v, and .mov video formats, Apple TV, the iPod, and the iPhone require more specific formats.
The iPod and the iPhone support up to 640x480 while Apple TV supports up to 1280x720. To optimize for all three platforms, we recommend that your source file is at least 640 pixels wide and that you use the built-in iPod converters in Compressor ("H.264 for iPod"), QuickTime Pro ("Movie to iPod") or iTunes ("Convert Selection for iPod"). Each of these maintains the aspect ration of your source file and results in an M4V file containing H.264 video (Low Complexity version of the Baseline profile) and AAC-LC audio. If you want to maximize the screen area of a wide-screen TV, your source file should have an aspect ratio of 16:9 (e.g., 640x360). If you want to maximize the screen area on the iPod, your source file should have an aspect ratio of 4:3 (e.g., 640x480).
Because it uses H.264 Main Profile, QuickTime Pro's "Movie to Apple TV" converter will result in a video that will not sync with the iPod.
Refer to the specifications below if you are not using the built-in converters in Compressor, QuickTime Pro, or iTunes.
iPod and iPhone can play the following video formats:
H.264 video, up to 1.5 Mbps, 640 x 480, 30 frames per sec., Low-Complexity version of the Baseline Profile with AAC-LC audio up to 160 kbps, 48 Khz, stereo audio in .m4v, .mp4, and .mov file formats
H.264 video, up to 768 kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 kbps, 48 Khz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video, up to 2.5 Mbps, 640 x 480, 30 frames per sec., Simple Profile with AAC-LC audio up to 160 kbps, 48 Khz, stereo audio in .m4v, .mp4, and .mov file formats
Apple TV can display H.264 video, up to 5mbps, 1280x720, 24 fps, Progressive Main Profile. Apple TV supports AAC-LC audio up to 320 Kbps. The gating factors for video are bit rate and frame rate. The following are some sample conversions generated by the QuickTime Pro when choosing "Movie to Apple TV":
Input Output
640x480, 30fps 640x480, 30fps, 3mbps*
1280x720 24fps 1280x720, 24p 5mbps*
1280x720, 30fps 960x540, 30fps 4mbps*
1920x1080, 24fps 1280x720, 24fps 5mbps*
1920x1080, 30fps 960x540, 30fps 4mbps*
1080i up to 60fps 960x540, 30fps 4mbps*
*Represents an average bit rate.
Beavis2084

Remote for iPod

Hi there.
I've bought the Apple Universal Dock for iPod with Apple Remote, and I wanna to know if there is any way to use this remote with the Remote app.
Thx all.
Obs.: I'm a PC user

Hi,
The menu button works with the new iMac:
b Apple Remote with Mac
Included with the new iMac G5, the Apple Remote gives you total command of your music, photos, videos and DVDs from anywhere in the room. It combines with Front Row a menu-driven, full-screen interface to make accessing your iMac's digital bounty from any seat in the room as simple as navigating your iPod. When you click the Apple Remote's
b Menu button
, your desktop fades and Front Row's sleek interface takes its place to give you control over your music in iTunes, your photos in iPhoto, the videos in your Movies folder and whatever DVDs you want to play. Turn up the volume. Shuffle. Skip to the next chapter on your DVD. Play a slideshow, a home movie you made in iMovie, even a movie trailer. Just sit back and enjoy the show.
Regards,
Colin R.

Remote for ipod touch

is there a way to use remote for ipod touch and iphone with only bluetooth?
i'm running 3.1 os for ipod touch and i have itunes 9

If you mean using the remote app for controlling itunes with your touch using only bluetooth, as others have said, that's a no. This might be an ignorant suggestion, but someone who knows more about it can maybe post after me. If you're connecting your macbook to the internet with an ethernet cable rather than a wifi router, can you set up a macbook as a wifi connection spot so that your ipod is connecting directly to the macbook via wifi? I would imagine you could use the remote app then.
I also sort of thought you were asking if there was a way to control your ipod touch using a remote via bluetooth, and that's also a no, but you can use a remote with a dock connector.

I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please help!

I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please HELP!

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. That is how it works
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

QuickTime Movie Files Won't Convert For iPod using iTunes and QuickTime Pro

I've got a ton, and I mean a ton of QuickTime movie files of music videos that I want to convert to use on the iPod. I tried using "Convert Selection For iPod" in the Advanced Menu on iTunes, but got the following message trying convert a QuickTime file of U2's Beautiful Day:
""Beautiful Day" could not be converted because this file does not allow for saving or conversion."
I purchased QuickTime Pro hoping that the features on Pro would convert the file. When I opened the same file to convert using QuickTime Pro, "Export" under the file menu was grayed out so I couldn't select it.
You'd think that an APPLE QuickTime Movie file that can be played on APPLE'S iTunes and APPLE'S QuickTime Player would be able to be converted to be used in APPLE'S iPod player. (Anybody notice how APPLE is capitalized to point out that the the hardware, software and file formats are ALL Apple?)
Instead I wasted money buying QuickTime Pro when it won't do what I specifically bought it for. Now I have all these QuickTime files which won't play on the iPod.
Can anybody provide some help or assistance on how to accomplish what I'm trying to accomplish???

If the file doesn't allow saving or conversions then it is protected by DRM (Fairplay).
Nothing can help QuickTime Pro convert protected files.

Output to 16:9 for iPod

Similar Messages

Maybe you are looking for