Output to monitor problem

Hi guys,
I have upgraded to FCP 6 in FCS2, and am having problems watching my projects on the monitor. There is a lot of flickering with rows and columns of grey squares appearing, and the film appears to stutter, while making some scratching noises through the speakers.
Refreshing the video solves the problem for a few seconds, and I have trashed the preferences using FCP Rescue 6. I have restarted both FCP and my G5 quad but nothing is solving it. It feels that it is software related, but I cannot be positive.
Hope that is enough info - I searched the forum to see if anyone else had had an issue, but I couldn't see any similar problem, so if I missed something - sorry!
Thanks
Stephen (UK)
G5 Quad   Mac OS X (10.4.8)   4.5GB RAM Quadro FX 4500 graphics card, Final Cut Studio 2, AE 7 pro, 2 x Sony Z1E

Hi there, well this is not excatly a reply, but I have just upgraded FCS2=FCP 6.0 and I have been using for at least 3 years on previous FCP versions a Formac DV converter to send signal to a normal TV set, specially for colour correction without any problem and know FCP 6.0 does not recognize the converter. On the system profile it appears as a DV Converter Firewire. I have tried all kind of switching it off and re-connecting the firewire without success. Maybe that we are suffering some kind of similar software problems???
G5   Mac OS X (10.4.9)   2 x 2 PowerPC - 4GB DDR SDRAM

Similar Messages

  • FCE HD Output to Sony Trintron Monitor Problems

    I am trying to output my Program Canvas to my Sony monitor, via a Hollywood Dazzle Firewire converter. When the Dazzle is trying to output to monitor, I get a very pixelated image and distorted audio.
    All the settings under view appear to be correct, with Apple Firewire NTSC. Are there any thoughts at to what I might be missing here that could help fix this problem.
    Thanks

    Connect your DV cam & see if you can play your Canvas to your camera. If that works ok, then the problem is either in the Dazzle, the TV or your cables. I would suspect the Dazzle first, or perhaps the FW cable second. Check whatever you can on the Dazzle setup - there might be some DIP switches on the bottom that need to be set.
    You might find some informative/revealing material in this review.
    (fwiw, I've never been wild about the Dazzle products myself, the quality never seemed up to other products on the market.)

  • Possibly mundane Mini-DVI to VGA into an external monitor problem

    Hi,
    I've had a look over the interwebs regarding my problem and it seems as if it's not unusual to have external monitor problems but I'm not sure if mine is slightly different:
    I had a perfectly working set up with my new Macbook (the white one, '06 model I believe), that was connected to my Hanns-G HU196D monitor via a mini-DVI to VGA adapter, no problems whatsoever. But for a couple of weeks now my Macbook just flickers a light blue colour, with nothing at all on the monitor, and my macbook is unusable until I remove the adapter. I've read about updating firmware but I can't see my desktop once the macbook is connected to the monitor so it's not possible to configure anything. I've read somewhere that my external monitor isn't compatible with this set up, but it was until a couple of weeks ago!
    My Macbook's 4 months old now and since then I've bought a new mini-dvi to vga adapter and a new VGA cable, no connections seem loose on either mini-dvi port or my monitor's vga port.
    Thanks if you can help!
    Jack

    You will need to use a mini Dvi-dvi and a dvi-svideo/rca adapter.
    Joy joy hallelujah.
    Pardon the sarcasm...I just wasted 3 hours of my life trying to sort the issue out.
    Heard a KWORLD PlusTV PCTOTV Converter SA235 USB 2.0 Interface would sort the issue out for under 40$ but it's not Mac.
    Hope that helps.
    ~r

  • Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

    Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
    Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

    Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
    Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
    Make sure SD DVD is selected:
    (If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
    Build your DVD and you'll be fine.
    Patrick
    P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

  • Output channel mapping problem for surround encoder

    vista 64 bit
    sound blaster titanium x-fi sound card
    logitech 5.1 speaker set up
    hello, i am trying to mix a movie i made into 5.1. when i open the surround encoder, go to the audio hardware setup and try to set my output channel mapping i only get two speakers. i have a card that supports 5.1, 5.1 speakers, and get surround sound when i play a DVD. yet audition only recognizes my left and right speaker. any help on how i get my output channel mapping set correctly?
    thanks in advance!

    Thank you for the info, though I admit I'm still a bit confused.
    My card is a creative x-fi extreme gamer.  It has 3 line out jacks and one line in jack.  T  Oh, here it is in the manual...thats just not good enough.
    But what is the surround encoder dialog box doing, if not encoding surround mixes?  The manual says I can exportsurround sound from a multitrack session. 
    Date: Mon, 1 Jun 2009 21:58:08 -0600
    From: [email protected]
    To: [email protected]
    Subject: output channel mapping problem for surround encoder

  • M93p dual monitor problems; monitor turns off and cannot be turned on again

    Hi,
    we have multiple M93p tiny computers causing problems in dual monitor setup (VGA / Displayport->DVI). Our users (already >5)  keep telling us, they leave their workplace, return, then DVI attached monitor if off and they do not find a way to turn it on. This is true; the only workaround that has been found by our users is to bring Win7/32bit into standby mode and awaking it again.
    Needless to say, we turned all windows energy saving options off (computer standby/hibernate, monitor turn off). Still the problem appears.
    Maybe there is something wrong with DVI power/DVI signal?
    - Monitor independent, as far as I can see
    - Independent from Windows energy saving modes
    - BIOS updates did not help
    [todo]: Try Intel/(AMD?) drivers, let users test.
    I haven't seen exactly when the monitor turns off because it is reported by users. I had a testing machine, but was not able to reproduce.
    http://forums.lenovo.com/t5/A-M-and-Edge-Series-Th​inkCentre/Dual-monitors-problem-VGA-and-Displaypor​... is related.
    Anyone?
    Thx

    Make a "Genius" appointment at an Apple Store to have the machine tested.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • Activity Monitor problems increase CPU and power burn

    Migration Assistant worked very nicely, transferring from a Powerbook G4 with 30GB of files and data in about 45min via Firewire.
    However, after 2 days of usage, the CPU was still running at 80% and applications were incredibly sluggish. My battery calibration at full charge only showed a little over 1 hour. Activity Monitor also would not show any processes -- the list was completely blank.
    The solution was to rename the Preferences folder, allowing programs to create a new Preferences folder. I then selectively populated the new folder with the main old preferences for mail, Safari, etc. This not only solved the Activity Monitor problem, but immediately drove down the CPU usage to about 10% where I'd expect it. Now the battery shows over 2.5 hrs on a full charge with the screen on full brightness (and it's BRIGHT!)
    Also, Microsoft Word/Powerpoint/Excel/Entourage: trial software on the MacBookPro will mess up your migration, so delete the trial software BEFORE MIGRATION ASSISTANT.
    Hope this helps some of you out there!

    Another thing users who run Migration Assistant should know is that many of your background processes and helpers may slow down the Macbook.
    For example, I notice that a bunch of PowerPC menu items running under Rosetta slowed things down. Also, the Microsoft Office Autoupdate background process, which is started from System Preferences > Accounts > Login Items constituted one Rosetta process running all of the time.
    When I remove/disabled these background processes, I noticed a significant difference.

  • External monitor: problem to enable video output

    Hello,
    I try to use an external monitor.
    I usually use it by a camcorder and a Firewire PAL in FCP without any problem.
    In Color, if I go in User preferences, Video output is set on disabled and the others (for example Digital Cinema preview or Firewire Pal) are all gray and I cannot set them.
    Thank you for your help.

    Luca,
    Please refer to the included documentation. Color does not and will not send external video through firewire to any device, save one, and that is the Aja IO HD and then that device is limited to standard definition video only.
    This "issue" has also been well covered in this and other forums: you need an input/output card manufactured by [Aja|http://www.aja.com/html/products_macintosh.html] or by [Blackmagic Designs|http://www.blackmagic-design.com/products>.

  • PLEASE HELP - COLOR SHIFTING PROBLEM on output NTSC monitors

    http://www.smmlv.com/testproject/
    Above is a link to a layered photoshop file that has a USA map and over a dozen network overlays used in a section of our video. I animate each layer on sepeartely in the video and have noticed a major problem recently, the color of the art does not hold true to placement. I created the art originally in Illustrator and then converted the file to Photoshop at 640x480, 72dpi. This has always worked perfectly in the past to display and animated artwork in FCP.
    Right now, in FCP I am using the NTSC DV 3:2 frame size, and the compressor of DV/DVCPRO - NTSC. I have a JVC Profressional DV deck that hooks up through firewire and sends S-Video to my monitors. This setup has always given me a great picture even though it is not completely upcompressed. Using these settings and this art, the color lines on this map in red, light blue, yellow and purple all have a "color shift" to the left about 5 pixels. It makes it appear that the line is where it is in the file, but the color overlaying the line is offset to the left 5 pixels and transperant to about 50%. This occurs only when viewed on some TV's and NTSC monitors and projectors. The strange thing is, some monitors display the color aligned almost perfectly on these maps and other monitors and projectors show this "digital halo" of color shifting really bad. If I take the layered network overlays in these colors and color tint them to black or grey, white, light green, or even light orange, they no longer have the color shifting and the detail is perfect.
    Is there any way to fix this problem? I have tried duplicating the sequence and setting the compressor to 8bit Uncompressed, and while my captured footage is not this compression, in theory the art should render at this higher resolution setting. This did nothing to solve the problem.
    I also have tried using different Broadcast safe and Y/C corrector filters with different results. The Y/C filter allowed me to reposition the color problem and thus removing most of the problem, but also removing most of the color. Nothing else has allowed me to seemingly move the color into the proper possition.
    What is causing this color shift on the displayed NTSC image?
    In FCP 4.5 I can see my rendered video in the program viewer screen and besides the pixel compression appearing on the lines, overall the video looks great paused or even better when playing. Then you view it through my deck onto my Pro Sony NTSC 19" color monitor and it also appears great, with a slight color halo to the left of these colors, but the color in the lines are there. If you are a few feet from the screen and know what you are looking for you might see it, but doubtful. Then you view it using the same signal on a 17" Samsung TV and the color shifting makes the map and other art, like the clients blue logo, look horrible, with each color line appearing twice and offset left from each other as if you had double vision. Normally I would think it is the TV causing this, but then we tested this same movie on 2 differnt projectors. The $700 Epson projector displayed everything beautifully, again with only the slightest color halo to the left, but then the Panasonic $4000 projector made everthing in these colors look double vision again. What is going on???
    One more thing to keep in mind, my color bars also show this problem with these colors as well as shot footage of these facilities. There are tall red poles in the shots and everything displays fine except for the red pole color looks like it's glowing off the pole to the left.
    PLEASE tell me there is a solution to this.

    I have tried Degaussing, using filters, changing cables, and testing other monitors and systems on these monitors, everthing I can think of to solve the issue. Is it FCPo or is it the monitors?... or is it a signal strength thing. Can monitors and projectors shift color when the signal is read from a DVD or Mini DV Deck? Is there a fequency difference (Ie: 75mgz or 80 mgz) that might be causing the shift in some monitors and not so badly in others. But if this was true, how would some DVD's (like Baby Einstein DVDs that use really bright colors) display red and blue perfect using these same player and monitor, while my projects is shifting color? Doesn't that rule out the signal from the DVD player if other DVD's do not have this issue?
    I have uploaded the original art used, an exported .jpg file from the FCP timeline and sample photos of 2 different monitors to show to show this problem as best I can. http://www.smmlv.com/testproject/
    Someone out there must have had this problem before. There's no way a color shift problem like this with Mini DV has gone on this long without someone seeing it.
    One last thing about what I have tried... I do understand that with editing in Mini DV instead of uncompressed or HD video I lose a bit of resolution (4:2:2) and I see this compression occuring in some of the areas in the video where these problems persist. But, I did remake the art and rerender this project in an 8bit uncompressed settings and then displayed that up on the screen and I get the same color shift. I keep going in circles trying to find the culprit that is causing the delema.
    PLEASE HELP! There are large tours going through our facilities daily and the large screen projector is displaying this problem as well. Let's just hope they don't notice and that their TV's at home or office does not display it on our final DVD's made.

  • Intensity Pro output to Sony monitor problem

    I'm monitoring the output from FCP 6.0.2 (OSX 10.5.2) on a MacPro, but the picture has a blue/desaturated colour cast to it (I get the same cast when outputting from Color & After Effects through the Intensity Card). Outputting to a Sony PVM 1454 via the Intensity PAL setting.
    I've tested the monitor is OK by plugging the component output from my Canon XH A1 into the monitor via the R G B cables into the corresponding R/R-Y, G/Y and B/B-Y inputs on the monitor & it works fine (color is correct).
    The interesting this is though, that the Intensity component cables out of the card are labelled '3R-Y OUT', '4 -Y OUT' and '10 AES/EBU OUT'.
    '3R-Y OUT' is plugged into R/R-Y on the monitor
    '4-Y OUT' is plugged into G/Y on the monitor
    10 AES/EBU OUT' is plugged into B/B-Y on the monitor
    Is this correct? I'm also getting (also lots of stripy diagonal lines across the screen).
    (I've also tried other combinations of cables - this combination is the only one which gives me any picture at all)
    I've checked that the monitor is set to component & that I've not got the monitor set to blue only!!!
    Any ideas would be most welcome

    Hello Simon,
    I assume you're using an Intensity Pro (with Component I/O).
    AES is for digital audio, it has nothing to do video.
    Please see page 30 of the Intensity Pro manual for the component output connection diagram.
    The AES cable should be gray/black.
    The video component cables should be red, green and blue.
    You also need to set the video output mode in the Intensity preference pane to "HDMI & Y, R-Y, B-Y".
    Hope this helps.
    Best regards, Oliver

  • Output monitoring problem

    Hello All,
    My problem is that my sequence plays perfectly in FCP. However, when I either want to check it on an external monitor, or, I try to print to tape - I get audio but no video, even stranger, when I hit the space bar, the picture comes up displaying the position the cursor has mover to. To make matters worst, I have other sequences in different project on the same external drive, and they work fine. My record deck is a Sony HDV, connected via firewire 800
    Any ideas?

    The original footage was recorded in Digital Betacam, Captured in another system, then exported to my External drive as a .mov file. I do suspect that it may have something to do with the sequence settings because since posting I copied the assembled clips on to a sequence that was working fine in another project and it worked fine. So I copied the sequence and pasted it back into the current project. So now I want to do another version, when I copy and paste the second version the shots a blown up and no amount of attempt to resize it works.
    Very frustrating

  • Having Monitoring Problems with in Adobe Audition using built in outputs No playback while recording?

    I was using Adobe audition to Record Audio and some how the output throught the hardware settings got changed to airplay. Now even if I change the settings to built in output the is no playback through the computer speakers!! aAny Help would be great! I Put this quesion in the Adobe Forums as well. Just thought I might get some help here quicker. Thanks for your time.

    "This program is too expensive to have such an amateur limitation."
    To help you, Eric.. this is a conclusion to the question the precedes it. I never blamed the program for my lack of knowledge. I wouldn't waste my time in a message board asking how to accomplish a task if I felt it was impossible.
    And, Arrogance? The extent of my description was to prevent people from responding with suggestions I've already tried. The second response fixed the problem (not the first, mind you) so it seems my message suited the situation... and no others found the need to tell me I was the problem.
    MY attitude is in response to YOUR arrogance. After asking a friendly question, you respond with the limitation only being mine, but there is also a limitation with the software. Contradictory? I see you have a reputation to uphold, and now understand the driver that came with Audition does have limitation. It's nice to see you have people that give you credit, because your posts merely tell me that (1) I don't know what I'm doing .. and (2) Yeah, Audition has the limitation you need help getting around.
    Well thanks for your help. My first and last point is why you find the need to tell people they don't understand something, when that's clearly why they've come to you and your peers. You'd make a great firefighter -- showin' up with flashing lights, to deliver the news to people that they don't know how to work an oven.

  • New eMachine w/Windows 7 and HP f1703 monitor problem

    Truly fed up at this moment, and not really tech savvy, but will try to be brief with problem:
    Had an HP Pavilion a767c which came with f1703 monitor - purchased around 2005 or so ... ran great, no problems, monitor functioned beautifully.  Had some storms come through area about 2 weeks ago, lost power several times, a767c started acting up (shutting itself off at night, but would come back on ... finally died, went through all the diagnostics, yesterday decided to purchase new controller, got an emachine at Best Buy, want to use HP monitor).
    About a minute into boot, f1703 changes from a "starting Windows" message to a "PC video resolution setting out of range" moving message ... never comes up to Windows desktop screen.  If I plug in an older CRT type monitor, everything comes up fine.  Have checked Control Panel, shows emachine hooked up to generic monitor ... found resolution settings, they are set for the 1280 x 1024 and made sure was at 60 Hz.  Just went through the diagnostic procedure here on HP for message during boot ... do not get any OSD when Menu button on monitor pressed ... I don't believe we've EVER pushed/accessed this feature in all the years we've had the monitor ... so I'm stuck at this point in going through diagnostics.
    Any help greatly appreciated.

    Dave, so sorry, but telling me my monitor is "VGA only" really isn't helping my confusion (original post did state I'm not too tech savvy).  I had my stepson (who is more tech savvy) work with the link you provided previously to download updated driver info from Intel.  Here is a rundown of everything we worked on yesterday with this beast:
    As a recap - if I hook up the f1703 directly to the emachine (video port states HDMI on back panel) and boot the machine, get the normal starting boot display and also a "Windows starting" display ... before the desktop screen comes up, the monitor goes into an error message stating resolution not set correctly at 1280 x 1024 @ 60Hz.  From that point, I never get to the desktop, the monitor is basically frozen.  emachine is running Windows 7 64bit.
    Pressing F8 during boot will allow me to get into Safe Mode, but in Safe Mode I can't download anything, and I'm very limited in what I can/cannot change.
    If I hook up an old CRT style monitor FIRST and boot the emachine, everything comes up normally ... I was able to find the HP f17093 driver in Windows 7 and get that driver set up with the 1280 x 1024 @ 60Hz resolution.  AT THAT POINT, if I unplug the CRT and plug in the f1703, I can use the computer normally and the display is excellent ... so to my way of thinking, there has to be an issue with some video command during boot that is sending a false signal to the monitor.  Make sense???
    I hooked the f1703 up to a different emachine (also running Windows 7) and I have the exact same problem ... locks up during boot before desktop screen.  For the heck of it, I'm going to try hooking the monitor up to a Sony Vaio laptop running Vista later tonight to see what, if anything, I get with that.
    Downloading the updated driver info from Intel really didn't accomplish anything positive ... although the Intel site stated there was updated drivers available, after downloading the emachine had picked up some kind of generic flatscreen driver to use and same issue existed, so that's not what's doing it.
    Oh, one other thing:  after getting the complete boot on the CRT, then switching plugs to hook up the f1703 I was able to access the monitor's OSD menus ... went through and reset to factory settings ... no difference ... monitor still hangs during boot when hooked up first directly.
    Dave, when you said VGA only, are you trying to tell me the output on the video card is not correct for the f1703 monitor?  Sorry, I just don't understand the HDMI stuff (what that is in layman's/idiot's terms).  Do I have to have a different video card?  Adapter?
    Thank you both (CherylG and Dave) for your patience and assistance ... this is just so frustrating.  I used to understand alot more back in the DOS/CPM days.

  • [solved] ThinkPad connect with extern Monitor Problem

    Hello community
    I have installed arch on my T420 integrated HD 3000 and i have the Problem that when i start arch and the boot messages comes i can see the deamon starts ok,ok,ok who should be on the right side but on the NEC they was displayed 5 cm inside. Also when iam on the console and i type dmesg all the output scroll down and broke 5 cm from the roof. And when iam on openbox and i will maximize one window it would be maximized on the size from the Laptop LCD.
    I have made an .xinitrc
    #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    #xrandr --output DP2 --auto --output LVDS --right-of LVDS
    #xrandr --output DP1 --auto --output LVDS --auto --same-as DP1
    xrandr -d DP2 -s 1900x1200
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    # exec gnome-session
    # exec startkde
    # exec startxfce4
    and here is my Xorg.0.log
    [ 81.298]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 81.298] X Protocol Version 11, Revision 0
    [ 81.298] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 81.298] Current Operating System: Linux bullitt 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64
    [ 81.298] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b8780ba-278c-4d61-a1ec-ba2a6f96c6ba ro quiet
    [ 81.299] Build Date: 27 August 2012 08:04:39AM
    [ 81.299]
    [ 81.299] Current version of pixman: 0.26.2
    [ 81.299] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 81.299] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 81.306] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 7 16:33:34 2012
    [ 81.307] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 81.308] (==) No Layout section. Using the first Screen section.
    [ 81.308] (==) No screen section available. Using defaults.
    [ 81.308] (**) |-->Screen "Default Screen Section" (0)
    [ 81.308] (**) | |-->Monitor "<default monitor>"
    [ 81.308] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 81.308] (==) Automatically adding devices
    [ 81.308] (==) Automatically enabling devices
    [ 81.308] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 81.308] Entry deleted from font path.
    [ 81.308] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 81.308] Entry deleted from font path.
    [ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 81.308] Entry deleted from font path.
    [ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 81.308] Entry deleted from font path.
    [ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 81.308] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 81.308] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 81.308] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 81.308] (II) Loader magic: 0x7c8b00
    [ 81.308] (II) Module ABI versions:
    [ 81.308] X.Org ANSI C Emulation: 0.4
    [ 81.308] X.Org Video Driver: 12.1
    [ 81.308] X.Org XInput driver : 16.0
    [ 81.308] X.Org Server Extension : 6.0
    [ 81.308] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
    [ 81.308] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 81.308] (II) LoadModule: "extmod"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 81.309] (II) Module extmod: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension MIT-SCREEN-SAVER
    [ 81.309] (II) Loading extension XFree86-VidModeExtension
    [ 81.309] (II) Loading extension XFree86-DGA
    [ 81.309] (II) Loading extension DPMS
    [ 81.309] (II) Loading extension XVideo
    [ 81.309] (II) Loading extension XVideo-MotionCompensation
    [ 81.309] (II) Loading extension X-Resource
    [ 81.309] (II) LoadModule: "dbe"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 81.309] (II) Module dbe: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension DOUBLE-BUFFER
    [ 81.309] (II) LoadModule: "glx"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 81.309] (II) Module glx: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (==) AIGLX enabled
    [ 81.309] (II) Loading extension GLX
    [ 81.309] (II) LoadModule: "record"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 81.309] (II) Module record: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.13.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension RECORD
    [ 81.309] (II) LoadModule: "dri"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 81.309] (II) Module dri: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension XFree86-DRI
    [ 81.309] (II) LoadModule: "dri2"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 81.309] (II) Module dri2: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.2.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension DRI2
    [ 81.309] (==) Matched intel as autoconfigured driver 0
    [ 81.309] (==) Matched vesa as autoconfigured driver 1
    [ 81.309] (==) Matched fbdev as autoconfigured driver 2
    [ 81.309] (==) Assigned the driver to the xf86ConfigLayout
    [ 81.309] (II) LoadModule: "intel"
    [ 81.310] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 81.310] (II) Module intel: vendor="X.Org Foundation"
    [ 81.310] compiled for 1.12.4, module version = 2.20.9
    [ 81.310] Module class: X.Org Video Driver
    [ 81.310] ABI class: X.Org Video Driver, version 12.1
    [ 81.310] (II) LoadModule: "vesa"
    [ 81.310] (WW) Warning, couldn't open module vesa
    [ 81.310] (II) UnloadModule: "vesa"
    [ 81.310] (II) Unloading vesa
    [ 81.310] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 81.310] (II) LoadModule: "fbdev"
    [ 81.310] (WW) Warning, couldn't open module fbdev
    [ 81.310] (II) UnloadModule: "fbdev"
    [ 81.310] (II) Unloading fbdev
    [ 81.310] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 81.310] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 81.310] (--) using VT number 7
    [ 81.313] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 8, (OK)
    [ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 8, (OK)
    [ 81.314] drmOpenByBusid: drmOpenMinor returns 8
    [ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 9, (OK)
    [ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 9, (OK)
    [ 81.314] drmOpenByBusid: drmOpenMinor returns 9
    [ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 81.314] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 81.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 81.314] (==) intel(0): RGB weight 888
    [ 81.314] (==) intel(0): Default visual is TrueColor
    [ 81.314] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
    [ 81.314] (**) intel(0): Relaxed fencing enabled
    [ 81.314] (**) intel(0): Wait on SwapBuffers? enabled
    [ 81.314] (**) intel(0): Triple buffering? enabled
    [ 81.314] (**) intel(0): Framebuffer tiled
    [ 81.315] (**) intel(0): Pixmaps tiled
    [ 81.315] (**) intel(0): 3D buffers tiled
    [ 81.315] (**) intel(0): SwapBuffers wait enabled
    [ 81.315] (==) intel(0): video overlay key set to 0x101fe
    [ 81.315] (II) intel(0): Output LVDS1 has no monitor section
    [ 81.315] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 81.315] (II) intel(0): Output VGA1 has no monitor section
    [ 81.340] (II) intel(0): Output HDMI1 has no monitor section
    [ 81.380] (II) intel(0): Output DP1 has no monitor section
    [ 81.393] (II) intel(0): Output HDMI2 has no monitor section
    [ 81.406] (II) intel(0): Output HDMI3 has no monitor section
    [ 81.464] (II) intel(0): Output DP2 has no monitor section
    [ 81.506] (II) intel(0): Output DP3 has no monitor section
    [ 81.507] (II) intel(0): EDID for output LVDS1
    [ 81.507] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0
    [ 81.507] (II) intel(0): Year: 2010 Week: 33
    [ 81.507] (II) intel(0): EDID Version: 1.4
    [ 81.507] (II) intel(0): Digital Display Input
    [ 81.507] (II) intel(0): 6 bits per channel
    [ 81.507] (II) intel(0): Digital interface is undefined
    [ 81.507] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
    [ 81.507] (II) intel(0): Gamma: 2.20
    [ 81.507] (II) intel(0): No DPMS capabilities specified
    [ 81.507] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 81.507] (II) intel(0): First detailed timing is preferred mode
    [ 81.507] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 81.507] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560
    [ 81.507] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
    [ 81.507] (II) intel(0): Manufacturer's mask: 0
    [ 81.507] (II) intel(0): Supported detailed timing:
    [ 81.507] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm
    [ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
    [ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
    [ 81.507] (II) intel(0): Supported detailed timing:
    [ 81.507] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm
    [ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
    [ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
    [ 81.507] (II) intel(0): AUO
    [ 81.507] (II) intel(0): B140RW02 V1
    [ 81.507] (II) intel(0): EDID (in hex):
    [ 81.507] (II) intel(0): 00ffffffffffff0006af3e2100000000
    [ 81.507] (II) intel(0): 21140104901f11780261959c59528f26
    [ 81.507] (II) intel(0): 21505400000001010101010101010101
    [ 81.507] (II) intel(0): 010101010101f82a409a61840c30402a
    [ 81.507] (II) intel(0): 330035ae10000018a51c409a61840c30
    [ 81.507] (II) intel(0): 402a330035ae10000018000000fe0041
    [ 81.507] (II) intel(0): 554f0a202020202020202020000000fe
    [ 81.507] (II) intel(0): 004231343052573032205631200a00d0
    [ 81.507] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 81.507] (II) intel(0): Printing DDC gathered Modelines:
    [ 81.508] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 81.508] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 81.508] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Printing probed modes for output LVDS1
    [ 81.508] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 81.508] (II) intel(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 81.508] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 81.508] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 81.508] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 81.508] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 81.508] (II) intel(0): EDID for output VGA1
    [ 81.533] (II) intel(0): EDID for output HDMI1
    [ 81.573] (II) intel(0): EDID for output DP1
    [ 81.586] (II) intel(0): EDID for output HDMI2
    [ 81.600] (II) intel(0): EDID for output HDMI3
    [ 81.657] (II) intel(0): EDID for output DP2
    [ 81.657] (II) intel(0): Manufacturer: NEC Model: 67d1 Serial#: 0
    [ 81.657] (II) intel(0): Year: 2011 Week: 33
    [ 81.657] (II) intel(0): EDID Version: 1.4
    [ 81.657] (II) intel(0): Digital Display Input
    [ 81.657] (II) intel(0): 10 bits per channel
    [ 81.657] (II) intel(0): Digital interface is DisplayPort
    [ 81.657] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32
    [ 81.657] (II) intel(0): Gamma: 2.20
    [ 81.657] (II) intel(0): DPMS capabilities: StandBy Suspend Off
    [ 81.657] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 81.657] (II) intel(0): First detailed timing is preferred mode
    [ 81.657] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 81.657] (II) intel(0): redX: 0.679 redY: 0.310 greenX: 0.210 greenY: 0.686
    [ 81.657] (II) intel(0): blueX: 0.149 blueY: 0.047 whiteX: 0.313 whiteY: 0.329
    [ 81.657] (II) intel(0): Supported established timings:
    [ 81.657] (II) intel(0): 720x400@70Hz
    [ 81.657] (II) intel(0): 640x480@60Hz
    [ 81.657] (II) intel(0): 640x480@67Hz
    [ 81.657] (II) intel(0): 640x480@72Hz
    [ 81.657] (II) intel(0): 640x480@75Hz
    [ 81.657] (II) intel(0): 800x600@56Hz
    [ 81.657] (II) intel(0): 800x600@60Hz
    [ 81.657] (II) intel(0): 800x600@72Hz
    [ 81.657] (II) intel(0): 800x600@75Hz
    [ 81.657] (II) intel(0): 832x624@75Hz
    [ 81.657] (II) intel(0): 1024x768@60Hz
    [ 81.657] (II) intel(0): 1024x768@70Hz
    [ 81.657] (II) intel(0): 1024x768@75Hz
    [ 81.657] (II) intel(0): 1280x1024@75Hz
    [ 81.657] (II) intel(0): 1152x864@75Hz
    [ 81.657] (II) intel(0): Manufacturer's mask: 0
    [ 81.657] (II) intel(0): Supported standard timings:
    [ 81.657] (II) intel(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 81.657] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 81.657] (II) intel(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
    [ 81.657] (II) intel(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
    [ 81.657] (II) intel(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 81.657] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 81.657] (II) intel(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 81.657] (II) intel(0): #7: hsize: 1920 vsize 1200 refresh: 60 vid: 209
    [ 81.657] (II) intel(0): Supported detailed timing:
    [ 81.657] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm
    [ 81.657] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 81.657] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
    [ 81.657] (II) intel(0): Ranges: V min: 50 V max: 85 Hz, H min: 31 H max: 92 kHz, PixClock max 165 MHz
    [ 81.657] (II) intel(0): Monitor name: PA241W
    [ 81.657] (II) intel(0): Serial No: 18107120UB
    [ 81.657] (II) intel(0): EDID (in hex):
    [ 81.657] (II) intel(0): 00ffffffffffff0038a3d16700000000
    [ 81.657] (II) intel(0): 21150104b5342078e2de45ad4f35af26
    [ 81.657] (II) intel(0): 0c5054bfef8081c0818090408bc09500
    [ 81.657] (II) intel(0): a940b300d100283c80a070b023403020
    [ 81.657] (II) intel(0): 360006442100001a000000fd0032551f
    [ 81.657] (II) intel(0): 5c10000a202020202020000000fc0050
    [ 81.657] (II) intel(0): 41323431570a202020202020000000ff
    [ 81.657] (II) intel(0): 00313831303731323055420a2020004b
    [ 81.657] (II) intel(0): Printing probed modes for output DP2
    [ 81.657] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
    [ 81.657] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 81.657] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x84.8 157.00 1440 1544 1696 1952 900 903 909 948 -hsync +vsync (80.4 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 81.657] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x84.9 122.50 1280 1360 1496 1712 800 803 809 843 -hsync +vsync (71.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 81.657] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x84.8 117.50 1280 1360 1496 1712 768 771 778 809 -hsync +vsync (68.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 81.658] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 81.658] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 81.658] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz e)
    [ 81.700] (II) intel(0): EDID for output DP3
    [ 81.700] (II) intel(0): Output LVDS1 connected
    [ 81.700] (II) intel(0): Output VGA1 disconnected
    [ 81.700] (II) intel(0): Output HDMI1 disconnected
    [ 81.700] (II) intel(0): Output DP1 disconnected
    [ 81.700] (II) intel(0): Output HDMI2 disconnected
    [ 81.700] (II) intel(0): Output HDMI3 disconnected
    [ 81.700] (II) intel(0): Output DP2 connected
    [ 81.700] (II) intel(0): Output DP3 disconnected
    [ 81.700] (II) intel(0): Using exact sizes for initial modes
    [ 81.700] (II) intel(0): Output LVDS1 using initial mode 1600x900
    [ 81.700] (II) intel(0): Output DP2 using initial mode 1600x900
    [ 81.700] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 81.700] (II) intel(0): Kernel page flipping support detected, enabling
    [ 81.700] (**) intel(0): Display dimensions: (310, 170) mm
    [ 81.700] (**) intel(0): DPI set to (131, 134)
    [ 81.700] (II) Loading sub module "fb"
    [ 81.700] (II) LoadModule: "fb"
    [ 81.701] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 81.701] (II) Module fb: vendor="X.Org Foundation"
    [ 81.701] compiled for 1.12.4, module version = 1.0.0
    [ 81.701] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 81.701] (II) Loading sub module "dri2"
    [ 81.701] (II) LoadModule: "dri2"
    [ 81.701] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 81.701] (II) Module dri2: vendor="X.Org Foundation"
    [ 81.701] compiled for 1.12.4, module version = 1.2.0
    [ 81.701] ABI class: X.Org Server Extension, version 6.0
    [ 81.701] (==) Depth 24 pixmap format is 32 bpp
    [ 81.702] (II) intel(0): [DRI2] Setup complete
    [ 81.702] (II) intel(0): [DRI2] DRI driver: i965
    [ 81.702] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
    [ 81.704] (II) UXA(0): Driver registered support for the following operations:
    [ 81.704] (II) solid
    [ 81.704] (II) copy
    [ 81.704] (II) composite (RENDER acceleration)
    [ 81.704] (II) put_image
    [ 81.704] (II) get_image
    [ 81.704] (==) intel(0): Backing store disabled
    [ 81.704] (==) intel(0): Silken mouse enabled
    [ 81.704] (II) intel(0): Initializing HW Cursor
    [ 81.704] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 81.707] (==) intel(0): DPMS enabled
    [ 81.707] (==) intel(0): Intel XvMC decoder enabled
    [ 81.707] (II) intel(0): Set up textured video
    [ 81.707] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 81.707] (II) intel(0): direct rendering: DRI2 Enabled
    [ 81.707] (==) intel(0): hotplug detection: "enabled"
    [ 82.106] (--) RandR disabled
    [ 82.107] (II) Initializing built-in extension Generic Event Extension
    [ 82.107] (II) Initializing built-in extension SHAPE
    [ 82.107] (II) Initializing built-in extension MIT-SHM
    [ 82.107] (II) Initializing built-in extension XInputExtension
    [ 82.107] (II) Initializing built-in extension XTEST
    [ 82.107] (II) Initializing built-in extension BIG-REQUESTS
    [ 82.107] (II) Initializing built-in extension SYNC
    [ 82.107] (II) Initializing built-in extension XKEYBOARD
    [ 82.107] (II) Initializing built-in extension XC-MISC
    [ 82.107] (II) Initializing built-in extension SECURITY
    [ 82.107] (II) Initializing built-in extension XINERAMA
    [ 82.107] (II) Initializing built-in extension XFIXES
    [ 82.107] (II) Initializing built-in extension RENDER
    [ 82.107] (II) Initializing built-in extension RANDR
    [ 82.107] (II) Initializing built-in extension COMPOSITE
    [ 82.107] (II) Initializing built-in extension DAMAGE
    [ 82.119] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 82.119] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 82.119] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 82.119] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 82.119] (II) AIGLX: Loaded and initialized i965
    [ 82.119] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 82.119] (II) intel(0): Setting screen physical size to 423 x 238
    [ 82.158] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 82.158] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 82.158] (II) LoadModule: "evdev"
    [ 82.159] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 82.159] (II) Module evdev: vendor="X.Org Foundation"
    [ 82.159] compiled for 1.12.3.901, module version = 2.7.3
    [ 82.159] Module class: X.Org XInput Driver
    [ 82.159] ABI class: X.Org XInput driver, version 16.0
    [ 82.159] (II) Using input driver 'evdev' for 'Power Button'
    [ 82.159] (**) Power Button: always reports core events
    [ 82.159] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 82.159] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 82.159] (--) evdev: Power Button: Found keys
    [ 82.159] (II) evdev: Power Button: Configuring as keyboard
    [ 82.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 82.160] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 82.160] (**) Option "xkb_rules" "evdev"
    [ 82.160] (**) Option "xkb_model" "evdev"
    [ 82.160] (**) Option "xkb_layout" "de"
    [ 82.160] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.193] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 82.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 82.193] (II) Using input driver 'evdev' for 'Video Bus'
    [ 82.193] (**) Video Bus: always reports core events
    [ 82.193] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 82.193] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 82.193] (--) evdev: Video Bus: Found keys
    [ 82.193] (II) evdev: Video Bus: Configuring as keyboard
    [ 82.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
    [ 82.193] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 82.193] (**) Option "xkb_rules" "evdev"
    [ 82.193] (**) Option "xkb_model" "evdev"
    [ 82.193] (**) Option "xkb_layout" "de"
    [ 82.193] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.195] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 82.195] (II) No input driver specified, ignoring this device.
    [ 82.195] (II) This device may have been added with another device file.
    [ 82.195] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 82.195] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 82.195] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 82.195] (**) Sleep Button: always reports core events
    [ 82.195] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 82.195] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 82.195] (--) evdev: Sleep Button: Found keys
    [ 82.195] (II) evdev: Sleep Button: Configuring as keyboard
    [ 82.195] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
    [ 82.195] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 82.195] (**) Option "xkb_rules" "evdev"
    [ 82.196] (**) Option "xkb_model" "evdev"
    [ 82.196] (**) Option "xkb_layout" "de"
    [ 82.196] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 82.197] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 82.197] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 82.197] (II) No input driver specified, ignoring this device.
    [ 82.197] (II) This device may have been added with another device file.
    [ 82.197] (II) config/udev: Adding input device Integrated Camera (/dev/input/event10)
    [ 82.197] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
    [ 82.197] (II) Using input driver 'evdev' for 'Integrated Camera'
    [ 82.197] (**) Integrated Camera: always reports core events
    [ 82.197] (**) evdev: Integrated Camera: Device: "/dev/input/event10"
    [ 82.197] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
    [ 82.197] (--) evdev: Integrated Camera: Found keys
    [ 82.197] (II) evdev: Integrated Camera: Configuring as keyboard
    [ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10/event10"
    [ 82.197] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
    [ 82.197] (**) Option "xkb_rules" "evdev"
    [ 82.197] (**) Option "xkb_model" "evdev"
    [ 82.197] (**) Option "xkb_layout" "de"
    [ 82.197] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.198] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event18)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event19)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event5)
    [ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
    [ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.199] (**) HID 046a:0101: always reports core events
    [ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event5"
    [ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.199] (--) evdev: HID 046a:0101: Found keys
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
    [ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5/event5"
    [ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 11)
    [ 82.199] (**) Option "xkb_rules" "evdev"
    [ 82.199] (**) Option "xkb_model" "evdev"
    [ 82.199] (**) Option "xkb_layout" "de"
    [ 82.199] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event7)
    [ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
    [ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.199] (**) HID 046a:0101: always reports core events
    [ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event7"
    [ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.199] (--) evdev: HID 046a:0101: Found 1 mouse buttons
    [ 82.199] (--) evdev: HID 046a:0101: Found scroll wheel(s)
    [ 82.199] (--) evdev: HID 046a:0101: Found relative axes
    [ 82.199] (II) evdev: HID 046a:0101: Forcing relative x/y axes to exist.
    [ 82.199] (--) evdev: HID 046a:0101: Found absolute axes
    [ 82.199] (II) evdev: HID 046a:0101: Forcing absolute x/y axes to exist.
    [ 82.199] (--) evdev: HID 046a:0101: Found keys
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as mouse
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
    [ 82.199] (II) evdev: HID 046a:0101: Adding scrollwheel support
    [ 82.199] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
    [ 82.199] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input7/event7"
    [ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 12)
    [ 82.199] (**) Option "xkb_rules" "evdev"
    [ 82.199] (**) Option "xkb_model" "evdev"
    [ 82.199] (**) Option "xkb_layout" "de"
    [ 82.199] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.199] (II) evdev: HID 046a:0101: initialized for relative axes.
    [ 82.199] (WW) evdev: HID 046a:0101: ignoring absolute axes.
    [ 82.199] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
    [ 82.199] (**) HID 046a:0101: (accel) acceleration profile 0
    [ 82.199] (**) HID 046a:0101: (accel) acceleration factor: 2.000
    [ 82.199] (**) HID 046a:0101: (accel) acceleration threshold: 4
    [ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event8)
    [ 82.200] (**) HID 046a:0101: Applying InputClass "evdev pointer catchall"
    [ 82.200] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.200] (**) HID 046a:0101: always reports core events
    [ 82.200] (**) evdev: HID 046a:0101: Device: "/dev/input/event8"
    [ 82.200] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.200] (--) evdev: HID 046a:0101: Found 9 mouse buttons
    [ 82.200] (--) evdev: HID 046a:0101: Found scroll wheel(s)
    [ 82.200] (--) evdev: HID 046a:0101: Found relative axes
    [ 82.200] (--) evdev: HID 046a:0101: Found x and y relative axes
    [ 82.200] (II) evdev: HID 046a:0101: Configuring as mouse
    [ 82.200] (II) evdev: HID 046a:0101: Adding scrollwheel support
    [ 82.200] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
    [ 82.200] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input8/event8"
    [ 82.200] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: MOUSE, id 13)
    [ 82.200] (II) evdev: HID 046a:0101: initialized for relative axes.
    [ 82.200] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
    [ 82.200] (**) HID 046a:0101: (accel) acceleration profile 0
    [ 82.200] (**) HID 046a:0101: (accel) acceleration factor: 2.000
    [ 82.200] (**) HID 046a:0101: (accel) acceleration threshold: 4
    [ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/mouse1)
    [ 82.200] (II) No input driver specified, ignoring this device.
    [ 82.200] (II) This device may have been added with another device file.
    [ 82.200] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 82.200] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 82.200] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 82.200] (**) AT Translated Set 2 keyboard: always reports core events
    [ 82.200] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 82.200] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 82.200] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 82.200] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 82.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 82.200] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 82.200] (**) Option "xkb_rules" "evdev"
    [ 82.200] (**) Option "xkb_model" "evdev"
    [ 82.200] (**) Option "xkb_layout" "de"
    [ 82.200] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.201] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 82.201] (II) LoadModule: "synaptics"
    [ 82.201] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 82.201] (II) Module synaptics: vendor="X.Org Foundation"
    [ 82.201] compiled for 1.12.2, module version = 1.6.2
    [ 82.201] Module class: X.Org XInput Driver
    [ 82.201] ABI class: X.Org XInput driver, version 16.0
    [ 82.201] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 82.201] (**) Option "Device" "/dev/input/event11"
    [ 82.203] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 82.203] (**) Option "TapButton1" "1"
    [ 82.203] (**) Option "TapButton2" "2"
    [ 82.203] (**) Option "TapButton3" "3"
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 82.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
    [ 82.204] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 82.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 82.204] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
    [ 82.204] (II) No input driver specified, ignoring this device.
    [ 82.204] (II) This device may have been added with another device file.
    [ 82.204] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event21)
    [ 82.204] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 82.204] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 82.204] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event21"
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 82.204] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input21/event21"
    [ 82.204] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
    [ 82.205] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 82.205] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
    [ 82.205] (II) No input driver specified, ignoring this device.
    [ 82.205] (II) This device may have been added with another device file.
    [ 82.205] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [ 82.205] (II) No input driver specified, ignoring this device.
    [ 82.205] (II) This device may have been added with another device file.
    [ 82.205] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
    [ 82.205] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 82.205] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 82.205] (**) ThinkPad Extra Buttons: always reports core events
    [ 82.205] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
    [ 82.205] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
    [ 82.205] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 82.205] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 82.205] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event9"
    [ 82.205] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
    [ 82.205] (**) Option "xkb_rules" "evdev"
    [ 82.205] (**) Option "xkb_model" "evdev"
    [ 82.205] (**) Option "xkb_layout" "de"
    [ 82.205] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.222] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 82.222] (II) intel(0): Printing DDC gathered Modelines:
    [ 82.222] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 82.222] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 82.415] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
    [ 106.807] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 117.740] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 117.740] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 117.767] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 117.767] (II) intel(0): Printing DDC gathered Modelines:
    [ 117.767] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 117.767] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 117.959] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    I have connect my ThinkPad per Dockingstation Displayport (I try also DVI) with an NEC PA241W. It seems arch takes the 1600x900 resolution from the Laptop :-(
    I dont know what to do makes the Kernel the Problem?
    On my second PC i have there an Nvidia when i start arch for install all are perfect on my NEC i connected it with DVI
    here is my xrandr
    [frank@bullitt ~]$ xrandr
    Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
    LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
    1600x900 60.0*+ 40.0
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 disconnected (normal left inverted right x axis y axis)
    HDMI1 disconnected (normal left inverted right x axis y axis)
    DP1 disconnected (normal left inverted right x axis y axis)
    HDMI2 disconnected (normal left inverted right x axis y axis)
    HDMI3 disconnected (normal left inverted right x axis y axis)
    DP2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
    1920x1200 60.0*+
    1600x1200 60.0
    1680x1050 60.0
    1680x945 60.0
    1400x1050 74.9 60.0
    1600x900 60.0
    1280x1024 85.0 75.0 60.0
    1440x900 84.8 75.0 59.9
    1280x960 85.0 60.0
    1360x768 59.8 60.0
    1280x800 84.9 74.9 59.8
    1152x864 75.0
    1280x768 84.8 74.9 59.9
    1280x720 60.0
    1024x768 85.0 75.1 70.1 60.0
    1024x576 60.0
    832x624 74.6
    800x600 85.1 72.2 75.0 60.3 56.2
    848x480 60.0
    640x480 85.0 72.8 75.0 66.7 60.0
    720x400 85.0 70.1
    640x400 85.1
    640x350 85.1
    DP3 disconnected (normal left inverted right x axis y axis)
    Does anybody have the same kind of connected an Laptop with an external Monitor and knows what was the Problem?
    I like arch very much but so it doesnt make fun :-(
    I hope someone can help me
    the picture shows openbox with the Thunar maximized
    Last edited by kerasi (2012-10-12 23:12:12)

    @trilby
    i use my Laptop at home 95% and at work 5%
    so my first choice would be to have the perfect resolution on my NEC external and when i opened a window it would display there and i dont have to open my Laptop to move the screen to see it on my external or is it so that you must have opened the laptop display to move the windows?
    And when i would take it at work it would be perfect if i see it on the laptop with his resolution 1600x900
    i hope i explained it well.
    @anoknusa
    i change your config to this
    xrandr --output LVDS1 --mode 1600x900 --pos 0x900 --rotate normal --output DP2 --mode 1920x1200 --pos 0x0 --rotate normal
    when i start firefox it was displayes well on my external but when i opened xterm or thunar pcman i have to open my laptop and move from it up to the external do i make a mistake?
    anoknusa wrote:I stuck that in a script to run when I start X; if the external monitor isn't plugged in, only the laptop display is used.  This sets each screen to act as a seperate display; I can still drag windows between them if I wish, as well as assign windows to open on one screen or the other through DWM's configuration file.  As mentioned earlier, this is also the only way (I think) to get each screen to display at its native resolution.  Note that I specify the resolution for both my T520 LCD and my external monitor, and specify their positions (my external is mounted to the wall above my desk, directly above my laptop); change those as necessary.
    what has xrandr to look like for my external monitor and laptop?
    and what would the script look like for me?
    external 1920x1200
    T420 1600x900
    and thank you for your patience and have a nice day
    ps: i know iam very close to find a solution for my problem
    Last edited by kerasi (2012-10-11 00:05:55)

  • HP 2730p external Monitor problems Intel GMA 4500

    Hi,
    So far I'm really happy with Archlinux on my Laptop (HP 2730p), but I can't get it to work properly with my external monitor
    The monitor (HF287) is detected and connected just fine, but that's about it
    According to the OSD of the monitor it's running with 1680*1050 Pixel (native resolution 1920*1200), no matter what resolution I choose using xrandr or the Systemsettings GUI, but only shows a 1280*1024 area of the actual screen, stretched into 1680*1050. The rest is out of the screen (adjusting the monitor doesn't change anything)
    If I set the the monitor to its native resolution (1920*1200) I only get a image like this:
    This is the external monitor with the default LXDE Background Image and a window reaching into the monitor just a bit
    The same problem occurs in Ubuntu (tested with a liveCD)
    However it works fine using Windows7
    Xrandr output
    Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
    LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 261mm x 163mm
    1280x800 58.5*+
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 593mm x 371mm
    1920x1200 60.0 +
    1680x1050 60.0
    1400x1050 60.0
    1280x1024 75.0* 60.0
    1440x900 59.9
    1280x960 60.0
    1152x864 75.0
    1024x768 75.1 70.1 60.0
    832x624 74.6
    800x600 72.2 75.0 60.3 56.2
    640x480 72.8 75.0 66.7 60.0
    720x400 70.1
    DP1 disconnected (normal left inverted right x axis y axis)
    TV1 unknown connection (normal left inverted right x axis y axis)
    848x480 30.0 +
    640x480 30.0 +
    1024x768 30.0
    800x600 30.0
    I have no xorg.conf or any file for the monitor on /etc/X11/xorg.conf.d
    extra/xf86-video-intel is installed and up to date
    However, I've tried following 10-monitor.conf (unsuccessfully):
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    EndSection
    $lspci |grep -i graphics
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    I hope I have provided enough information and someone can help me to fix this problem.
    Last edited by grayscale (2011-08-30 08:18:20)

    Sorry for reviving this thread from the dead, but I found a workaround and wanted to share it:
    As mentioned on https://bugs.launchpad.net/ubuntu/+sour … bug/796030 this is a known(?) bug with Kernel versions newer than 2.6.34.
    So after downgrading to this version I was able to use the full resolution of the screen, but with a ~ 200pixel wide stripe missing between the monitors (External left of internal => virtual Screen of 3200*1200) and a equally sized stripe of the most left screen on the most right side. This stripe was only missing for the screen, but not for the mousecursor => If I wanted to press a button I had to press it ~200pixel right of it
    (But I was able to use Composite Effects in Compiz)
    This was resolved by disabling Composite in xorg.conf
    not the full xorg.conf
    Section "Extensions"
    Option "Composite" "Disable"
    EndSection

Maybe you are looking for