Output to only Desktop and then only some formats
Speedgrade will only Output to my Desktop and in Quicktime. If I poini it to another location or drive it zips through the file and I get a done message but nothing is written to file. Any ideas???
Please make sure you're running 6.0.1. Can you upload a screengrab of your render settings ?
Thanks.
Dennis
Similar Messages
-
i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?
If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.
-
I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? As of now, I get the following bracket opening on screen when I click on the Acrobat icon for attachment within the email: Thank you
Adobe Acrobat has stopped working
Windows can check online for a solution to the problem.
-Check online for a solution and close the program
-Close the program
Problem signature:
Problem Event Name: APPCRASH
Application Name: Acrobat.exe
Application Version: 11.0.7.79
Application Timestamp: 536b812b
Fault Module Name: Acrobat.dll
Fault Module Version: 11.0.7.79
Fault Module Timestamp: 536b80ff
Exception Code: c0000005
Exception Offset: 00cbf281
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtHi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave -
Using iPhoto, I want to move photo from one event to another I export it to desktop and then reimport. Titles and other info vanish; only the original jpg number comes thru. How do I avoid this?
Don't do that - flag the photo and go to the target event and use the add flagged photo to selected event command to move it intact within iPhoto
LN -
I have a FreeAgent GoFlex backup drive (for Mac) after a while the icon disappears from the desktop and can only be restored by reconnecting the firewire. This also happens when I use the USB connection as well. Thanks
Did you use any of the "sleep" drivers supplied? I have found it best to just totally reformat/erase the drives and let the OS handle them.
-
Could 'export button' show only pdf, and excel only?
Hai,
I am using report viewer, it has export button in that header.
Could 'export button' show only pdf, and excel only?
So the report just only export pdf only or excel only.
Technology:
Asp.net Vs2010
SSRS2012
Windows 7I found the solution:
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/74dad27b-ef7e-4b9b-8922-666b317b3094
This is the additional code, to hide all type of export.
DisableUnwantedExportFormat((ReportViewer)sender, "XML");
DisableUnwantedExportFormat((ReportViewer)sender, "CSV");
DisableUnwantedExportFormat((ReportViewer)sender, "IMAGE");
DisableUnwantedExportFormat((ReportViewer)sender, "PDF");
DisableUnwantedExportFormat((ReportViewer)sender, "MHTML");
DisableUnwantedExportFormat((ReportViewer)sender, "EXCELOPENXML");
DisableUnwantedExportFormat((ReportViewer)sender, "WORDOPENXML"); -
hey plz help me out!! i am using macbook pro 10.5.8..... and was using photobooth...and then after some time i opened it and there was no green light on cam, and it displayed nothing! plz tell me how to fix it! i want to see my face again!!! plz help me
iSight troubleshooting
http://support.apple.com/kb/HT2090 -
My laptop turns on, reaches the desktop and then suddenly fades to black as if it was put to sleep but never comes back to life until I turn it off and on again. What do you think is the problem and how can I fix it?
If your phone got wet, try this first:
How to Fix a Wet iPod or iPhone
If this does not help, you'll have to get it serviced:
Apple - Support - Service Answer Center -
Hi,my apple tv show me only computers and settings only after update the new software
Hi my apple tv show me only computers and settings only after update the new software
Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.
-
Since updating to OS X Yosemite, I am unable to save files into another computer or server. I have to save it on my desktop and then drag it into the server. How do i correct this?
Ok this worked to solve the error.
Use cmd prompt in windows 7 or 8 and run as admin:
sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
No need for all that power shell nonsense as shown elsewhere for windows 8.
That's it. Also force smb2 disabling on the apple side for good measure.
With the above I was able to network mavericks and windows 8.1 pro flawlessly. He issues I had before where I could not read video, ISO and audio files (but could open documents and pictures from the windows machine connected to an apple network share folder went away. -
imovie won't let me drag the songs from the music and sound effects into my 'project'... I have tried everything, restarting itunes and imovie, dragging the songs to my desktop and then onto imovie, youtube tutorials...
Don't drag them, import them from Media.
-
Why is Time machine making a few incrementals and then only full back ups?
Is there anybody out there using Time Machine and Time capsule with a laptop? After 3 weeks I am extremely frustrated!
I made an initial full back up and everything went well for a couple of days. Then one day and I think it was after I took my laptop away on my return it started making a full back up again (takes 8 hours to do so). I let it do its thing, thinking it might for some reason not be feeling comfortable with the gap in between or that perhaps it had been at some crucial phase in its backing up and I should perhaps have stopped it making the incremental back up when I took the laptop away. So, after that I tried stopping the back up when I needed to go away. Same result: Next time I open my laptop a full back up starts.
Last Tuesday when I wanted to restore something I discovered it had not made any back up's since Sunday. Only reason I can think off the fact that I had been out of the house most of the time and perhaps hadn't connected to the time capsule long enough for it to do its thing. Yesterday I had a full back up finishing at 12.54pm, then I had incrementals until 5.54 pm and then suddenly (I did not move or close the laptop) at 6.54 it started on a full back up. I stopped that back up at 7.15 because I needed to go somewhere, but started it again at 10.30pm when I got back. I left the laptop open, but this morning it had not got any further than 5. something gb.
I should probably start all over again, but if I don't know what I am doing wrong I can see myself end up in the same pickle again.
On Tuesday I did have another interesting thing happen that may or may not have anything to do with it: I closed my laptop and opened it again and all the settings of anything that is connected through time capsule to the internet had gone as well as the content of my inbox.
Anybody any ideas?
AnnekeTM recognizes that the drive is different, so it will want to do a full backup. I believe there may be a workaround listed here:
http://web.me.com/pondini/Time_Machine/Troubleshooting.html -
External keyboard only now and then work in Logic Express. Why?
I use a Roland JX 305 Synthgroove as keyboard with Logic Express. If I want to use it as Audio instrument, -using the sounds that are in Logic available - It only works now and then. I can play the keyboard, but after i changed a setting or switched shortly to another track, I have to start up Logic again, before I can get any music out of the keyboard. How come?
Also send you requests in using this link so Apple will see them and not just other users:
http://www.apple.com/feedback/ipad.html -
When you click on the drop-down menus like File or Tools the menu only flashes and will not stay opened long enough to make a selection.
Thank you very much that solved the problem.
-
Started after I updated to the new itunes, i have tried reinstalling itunes but that does nothing. I have also tried to use a different cable. I'm using a Windows 8.1 computer.
I fixed it by uninstall all apple programs had on my computer and then reinstalling itunes.
Maybe you are looking for
-
I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?
-
Correction feature from keyboard no longer working
After installing the last iPhone software update 1.0.2, I noticed that the correction feature from the keyboard is no longer working, does not pop-up to suggest corrections or words. Even if I prefer this feature off since it let me type faster, I am
-
OS9 version of Outlook Express to Leopard version of Mail
Hello, I have to help a friend migrate from an early 2000 iMac running OS9 to a current new iMac running Leopard (still to be purchased). According to MacTracker her old iMac does have Fire Wire so I imagine I should be able to hook up the two comput
-
Transportable Tablespace Issue
Hi all, I dont know somebody else has posted this error here before, I am sorry If so.. I am getting an error when I am transporting tablespace's metadata... can anyone help me about this issue ? My OS is RH 4 ========================================
-
When I upgraded to 10.4.11, I noticed there was also an upgrade for GarageBand. How do I create a ringtone? Is there a Manual out with instructions? Thanks for the help, in advance.