Output to PDF not supported image files

In generating a pdf from Output to PDF in Bridge CS5, I get this dialog: "Contact Sheet Processed. Some of the selected files are not supported image files." Some of the files are included in the PDF and some are not. I'm making a PDF of INDD files, and can not find a difference between the files that generate and those that don't. I've never had this problem before. Any thoughts, anyone?
Thank you,
Emmy

" Some of the files are included in the PDF and some are not. I'm making
a PDF of INDD files, and can not find a difference between the files that
generate and those that don't.
That should not happen, double check if the filenames all contain the
correct extension and there is only one dot in the filename, the one in
front of the extension (.indd)
Also use the purge cache for folder option (menu tools/cache/purge cache for
folder) when having Bridge poited to the folder with the problem files.

Similar Messages

  • Image cannot be rendered because Aperture does not support image format

    Dear all,
    I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
    • Dfine 2.0 for Aperture
    • Color Efex Pro 3.0 Complete for Aperture
    • Silver Efex Pro for Aperture
    • Sharpener Pro 3.0 for Aperture
    • Viveza 2 for Aperture
    History
    Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
    • I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
    • My library contains just over 10000 images / approximately 140GB
    • I have recently updated the OSX software update including the security update 2010-005
    • as well as the Snow leopard graphic update 1.0
    • As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
    • As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
    After all, Several times I continued using the system / still no noticeable problem until the following was happening:
    Problem:
    After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
    After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
    *"This image cannot be rendered for editing because Aperture does not support the image format"*
    Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
    • I am still able to eddied normally with Aperture ( so far I do not find any other issue)
    • A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
    The following actions have been taken to overcome the issue (all not successful):
    • I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
    • Uninstallation of all Nick software Plug-In selection
    • Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
    • Repairing the library ( all three possibilities)
    • installation of latest EOS utilitys
    Questions
    • Can you support me to overcome this issue?
    • Have you heard similar issues of Nick user Running the Aperture plug-ins?
    For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
    I would be happy if you could support me in this issue.
    Best regards,
    Matthias
    PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
    Harware:
    Modellname: MacBook Pro
    Modell-Identifizierung: MacBookPro5,1
    Prozessortyp: Intel Core 2 Duo
    Prozessorgeschwindigkeit: 2,66 GHz
    Anzahl der Prozessoren: 1
    Gesamtzahl der Kerne: 2
    L2-Cache: 6 MB
    Speicher: 4 GB
    Busgeschwindigkeit: 1,07 GHz
    Boot-ROM-Version: MBP51.007E.B05
    SMC-Version (System): 1.41f2

    Dear Ma-Le / All
    I have just had the same problem
    I use
    • Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
    • Camera Nikon D300, with probably 75,000+ images on 2 hard drives
    • Photoshop CS2 with PhotoTools 2.5 plugin
    This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
    Since then on most of my files it has not been possible to use an external editor.
    A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
    The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
    The following have each been tried, all unsuccessfully:
    - Using each of Aperture's library 3 first aid options
    - Rebuilding directory using Diskwarrior
    - Checking for virus using Virus Barrier X4
    - Defragmenting library hard disk using TechTool pro
    - Changing permissions settings
    - Using Disk Utility first aid to repair permissions and checking main disk
    - Removing some plist elements when open 'show package contents' of library
    - Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
    Several things seem to me to be totally bizarre:
    1 - The problem is the same on the other library hard disk which was not in use at the time
    2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
    3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
    4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
    I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
    Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
    Eric
    PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One

  • Signature Scribble field not retaining image file after saving

    I have 2 issues with my PDF dynamic file I sent out
         1) The add/remove controls is adding a random amount of extra blank rows upon saving the PDF
         2) The image files selected for the Signature Scribble field is not retaining the image file after saving. It also doesn't give an opportunity to actually draw in a signature.
    I even tried to use the Subform Instance Controls Insert/Remove/Move in my table, but I keep receiving the error "You have reached the maximum number of items allowed"
    I would appreciate any help you can give me! I have been farting around with this for too long.
    Thanks!
    Rhonda

    Thanks Pat.  Tried each, restarted computer each time; tried the "Accept" routine several days ago - it worked briefly and then stopped.  Uninstalled Reader and Flash as well.  Strange thing with Flash, one of my online broker programs provides streaming of CNBC.  When I clicked on the CNBC option to initiate CNBC, I got a message saying that I needed to load Flash.  I did, and it loaded again with no mention of Flash having already been installed.
    Using Internet Explorer works, as well as, clicking on the .pdf file within Windows Explorer (WE).  Expanding the window in WE makes it large enough to read.  I would still like to find a way to open the files as they are designed to open.
    I have done all of the Adobe updates as they have been presented.  Microsoft updates load automatically, and restart my computer in the process.  I do not look to see what the updates have been.  I figure if there was not a need, Microsoft would not make the updates.
    [private data removed]

  • InDesign may not support this file format message?

    What do I do when I get a Adobe InDesign may not support this file format, a plug-in that supports this file format may be missing message?

    Do you understand the difference between embedded (all of the image data is stored within the file) and linked (what happens when you use File > Place.... where a pointer to the file stored in the file along with a screen preview)? You must deliberately embed images -- there's no way to do it automatically. Pasted graphics are also stored internally.
    As to why it no longer works? Probably a write error while saving, especially if this is saved on a network drive. Writing 9 gb takes some time, if the file was really that big and isn't cross-linked to something else.
    To keep ID file sizes down always Place images and graphics rather than pasting, and do a periodic Save As to remove old change data that will become useless file bloat when you close the file. I tend to add a version suffix when doing the Save As at any major change point, rather than overwriting the original, as it gives me an automatic backup chain and a way to go back to a previous version if I need to move in a different direction.
    Do you have a backup?

  • How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file for

    How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing , or the file may be open in another application?

    Shouldn't the CC version be able to open any file created in an older version on InDesign?
    Yes, it ought to.
    If the older file wasn't yours (if someone emailed it to you,or burned it on a disc, or whatever), then I am almost willing to bet you a beverage in the city of your choice that it's not a complete InDesign file. That is, maybe it was zipped and renamed, or the beginning or end of the file was chopped off during download, or something like that. The only reason I'm not actually making the bet is that there is a remote chance that I'd lose, and maybe you're in Adelaide or Khabarovsk or somewhere where the cost of airfare to me would make that bet a very expensive bet for me to to lose. So no latte for you if I'm wrong!
    The script that Jongware posted will tell you what version of InDesign made the file to begin with. Additionally, if someone did something like rename YourFile.PDF to YourFIle.INDD, it'll report that it's Not An InDesign File. Because while SpectrumPCS is kinda right and that message can be generated when attempting to open a CS5 file in CS3 or whatever, it also spits out the same message when you just try to open an Autocad file, or a Windows system file, or a PDF, or any file that InDesign actually cannot open at all.

  • IMAQ ClipboardToImage IMAQ Vision does not support the file type you specified.

    Hi.
    I have been trying out the inventeering INVENTvisionIMAQexample.vi. But i always encoutered
    an error in the INVENTvisionVFWcopy.vi of "IMAQ ClipboardToImage IMAQ Vision
    does not support the file type you specified." And the video window does not
    appear full size with real-time capture image. Does anyone encountered this problem as well? Please enlightened me. Thank you.

    What error it is throwing ? if you could attach the vi then it will be easy to find out the problem

  • Lightroom 3 does NOT support raw files for the  Canon Sureshot S95

    Have just bought the new Canon Sureshot S95
    after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
    Canon Sureshot S95.
    Come on Adobe.....please provide an update asap.

    (1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW.  Hardly a satisfactory solution.
    (I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ). 
    (2) SUGGESTION-  even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting).  I am sure users with that preference would still prefer a JPEG than no picture at all!
    Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs.  So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
    JJ
    *  (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

  • Error....PDF not supported in Content Viewer (even with PDF stacks removed)

    I started this project by changing the default Image Format to PDF not realising that the desktop viewer would not display them. Subsequently I have rebuilt them as Automatic. I am now trying to view the entire project in the desktop viewer in order to make a screen capture movie (moving between articles) but I am still receiving the Error....PDF not supported in Content Viewer despite the fact that I now have no PDF Stacks! Is this because I set the default to PDF originally?
    How do I get out of this?

    Thanks Bob
    I initially set my default to PDF but then after realising that I could not then use the desktop viewer I had to re-build the "offending" 5 articles as Automatic, so far so good but having done that I still get the same error message! So then I have to rebuild the entire magazine of  825 mb because somewhere the folio builder still thinks it contains PDF stacks even though it doesn’t. This is another example of the failings of this application. As I have said numerous times before Adobe is requiring us to buy a product that is in reality still beta software!
      Please submit this as a bug.

  • I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

    I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

    Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
    You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X  or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • Getting error "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

    How to fix this problem
    "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

    When I have seen this message it is either when I try to open a document with an older version of Indesign E.g. an indesign 2014 document with Indesign CC.
    The other time I have seen it is to open an Indesign CC document with Indesign 2014 which does not have Mindsuite - a plugin I use. Mindsuite, as yet, has not upgrade the plugin for Indesign 2014 therefore it recognises that a the document was created withe a plugin that the 2014 version does not have installed.
    I believe your problem will be something like that.

  • Nokia E75 does not support sis files

    I've been trying to upgrade the Ovi maps on my E75, because navigation has kept me saying that I need to renew the license. I went to Nokia web site and found out that I need to upgrade Ovi maps in order to get the free navigation. I have a 202.12.01 firmware and I installed it once again when I had unsuccessfully tried to upgrade Ovi maps. I have Ovi maps v3.01 09wk44b01 (MW OpenGL LM MN) and Map version 0.1.24.114 (OpenBitLM 6.22.5). I've deleted all old maps and started to download new ones successfully over Nokia Ovi Suite. I've downloaded Nokia Ovi Suite and followed the instructions for downloading and installing the newest version of Ovi maps application (I suppose it must be newer than the one I have on now, because navigation still wants me to buy license, I guess it must be 3.03 or higher). I've tried it several times from the scratch, just to make sure I did it right. Of course I've also chosen the right E75 phone from the drop down menu and I downloaded the file nokia_maps_3.01_09wk44_b01_s60_3.2_lm_rom.sis. I double-clicked it and everything seems to be right, but when action on the phone should be required the installation guide says "Nokia E75 does not support sis files". From the sis file name I can only now see that I have this version already installed.
    Does this mean I can not use navigation for free on E75?
    Can anybody help me ASAP, because I need the navigation evey day very badly?

    I'v followed the directions of chanchan05 "Just uninstall the maps app, delete the folder and file I mentioned, then reboot your phone. Open the maps app, and it should recreate the qf file and cities folder in a version compatible to 3.03." on /t5/Maps-Navigation-and-GPS/Wasn-t-it-supposed-to-be-quot-Navigation-on-your-Nokia-Free/m-p/668305#M...
    Afterwards I installed the sis file you pointed me to and it worked. The maps on the phone were deleted, so I downloaded new ones over Nokia Ovi Suite and tried the navigation. Unfortunately it stills demands buying the licence for the navigation.
    I guess this is because the recommended sis file is v3.01 and not v3.03? Is that right?
    Any other solution?

  • Thunar does not recognize image file formats

    Hi Archers,
    My problem is that I use XFCE4 with Thunar file manager and Thunar does not recognize image file formats. I mean for example JPG format is an executable application fromat according to my Thunar, but I'd like Thunar to recognize JPG format as image or bitmap format appearing with small preview of the image.
    Any help is appritiated!
    gellb

    Yes, I did.
    Activating Show Thumbnails button in Preferences of Thunar does not work.

  • Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file

    Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file
    How do I fix this?

    That would probably be a question best taken up in on a site for Windows support questions. Not knowing anything about the movie you're trying to play, all I can suggest is to confirm that the format of the movie you wish to play is supported in your version of WMP. If it isn't, you'll either need to convert the movie or use some other player software.
    Regards.

  • Error message url not supported by file

    When I'm on the internet, I randomly get an error message that reads 'url not supported by file:' What does this mean?
    Okay, just read other comments on this and I shut off my Time Machine for now - hopefully this works.  Thanks

    Depends on which browser and it's version you are using?  Solution may be found if you search in the "More Like This" section over in the right column. 
    Are you wireless or ethernet connected? 

Maybe you are looking for

  • How can I edit docs created in Pages on my iMac?

    Can I import Pages docs through icloud, or is there a way to edit on-line?

  • How to use Connection.clientinfo with v$session table

    Hi everyone, I'm trying to keep tabs on the number of connections I create (via python and cx_Oracle) by monitoring Oracle's v$session table. From the cx_Oracle docs, it appears the preferred way to write my "module" and "action" parameters to v$sess

  • How to download FaceTime for iPhone 4s?

    How to download FaceTime for iPhone 4s? I m using phone in UAE

  • Estimated and actual number of rows at filtered statistics

    I have query like this: SELECT productID FROM dbo.table WHERE nar_closed=1 AND nar_status=0 I have filtered index: CREATE NONCLUSTERED INDEX [x_status] ON [dbo].[Table] (nar_status ASC) INCLUDE(productID) WHERE nar_closed=1 In execution plan I can se

  • Startup sound too loud

    I own a macbook pro 15" bought on may 2011, working with Snow Leopard OS. It worked very well until it presented troubles with startup sound which suddenly completely disappeared. I cleared this reseting PRAM / NVRAM as explained in the Apple Support