Output to phone isn't full screen

Hey,
I've searched the forum for a solution but have not had much luck.
Whenever I preview to a mobile device, the content isn't 100%.
My stage is set up to the correct resolution of the target device (1280px X 720px)
I'm using Edge Inspect but this is also the case when I load the .html locally from of the SD card.
There must be a way to view and interact with the content at 100% on a device...
Any help would be much appreciated.

Have you tried maybe adding a viewport meta tag to the header?
Like this:
<meta name="viewport" content="width=device-width, initial-scale=1">
Hope that helps.

Similar Messages

HT204291 Mirroring isn't full screen

I can connect using airplay but the display isn't full screen. How can I adjust it?

Welcome to the Apple Community Kjk.
Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you.

Full screen isn't full screen,unless I use "maximize" and later goes back

I used to be able to press full screen and it would be fine and when I closed ff, upon restarting it would restart in full screen. Something has gliched. When I press full screen in regular size, the full screen isn't full, only about 90-95% of screen. I can make it go full screen if I click
"maximize " and then full screen , but if at any time the screen isn't maximized, the same thing happens. If I close maximized and full screen
it opens with the reduced full screen. I can't move or stretch it out in anything except normal screen, and again, not I click full screen from there. I never had this problem.

You provided no information about installed extensions. <br />Do you have any extensions installed?
Does Firefox do that while running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode]

It isn't full screen on tv

Hi the picture that encore created, is not full screen although it is 720*576 vob file.how can I correct it?
thank you so much.

Go to Interprete footage and set it to widescreen, then burn in Encore.
Also check the dvd player.

Twitter app isn't full screen on 4s

Recently, my 4s crashed after updating it to the new IOS 7.0.3. It erased all of my data but thankfully I had most of it backed up to my computer. Once I finally got everything updated (because I hadn't backed my phone up since September) I got on twitter and facebook. They are both not functioning correctly. The screen is like a little box and there is no way for me to expand it or anything. Same for facebook. I have tried deleting it multiple times and reinstaling it and just about everything else i can think of and it wont work! Please please help me if you know how to fix it!!!

I have no clue what is their deal! All my other apps are fine its just these two!!

IPad 2, Digital AV Adapter not full screen

Hi,
I bought an Apple Digital AV Adapter three days ago.
I use my iPad 2 connect with Sony Bravia 32' television via Digital AV Adapter,
The iPad 2 instantly connect to the television, but the problem is that the screen that display isn't full screen. I tried with every setting on my iPad and also on the television but still no luck and the scree still appear to be 1/4 of the size.
I also tried with other television from my brother's house and give the same result and I tried with my brother's iPad and samething.
I went to the Apple store and change the cable because I read one of the article in this site and said they change and work so I tried but still giving the same result.
This is a bit out of the topic but I tried with my iPhone 4 (with some hack) and iPhone 4 give full resolution which is kinda weird why not with iPad :/
can anybody give any advice what should I do?

there is a bug in this device, and it's all apples fault with iso 7.
Here is what you need to do to fix it this annoying problem. What you need to do is first power on everything and connect your device up. IN settings look for Settings, General. there will be a little Magic box that shows up only when it's connected and working called video out. select that and look for widescreen, change it to off or no. but the selection you make here does nothing tell you reboot the device. so unplug the video out adapter and reboot the device and once connected up it should show the video in its right aspect ratio now. I played around with this for an hour tell I figured out it needs to be rebooted.
Enjoy.
and for me for some odd reason windscreen turned off means it's on.

Full screen picture for contacts

I have recently upgrade to the iphone 5. I use MS Exchange to sync contacts and email. I want to have full screen picture for caller ID but it only gives me a thumbnail. Any suggestions to get full screen picture for caller ID?

It used to be that if you assigned the picture while on the phone, it was full screen. I remember reading around iOS 5 I believe that it only allowed for full screen, but I still have a couple that are only thumbnails that have been synced over from contacts in LinkedIn. Try assigning the picture from the phone itself and see if that changes it.

Full screen incoming caller

Why Apple removed full screen incoming call photo. It was an awesome feature. I hope Apple will consider this and return in next version of iOS. Everyone has got their own happines to see loved ones photo, which makes them happy, relaxed and lot more, when phone rings with full screen photo.. Thanks

Venkat Varada wrote:
Thank you for such a polite reply Courcoul
And thank you for taking the time to read the Terms & Conditions of this forum, which state that this forum is for technical assistance only, not for complaints or feature requests.

Full screen screwed up.

Ok. I downloaded iTunes like 9.1 or something, the most recent version. Anyway, now the viewing screen for my movies is messed up. It's too small on the iTunes screen and full screen isn't full screen. It is a black background with the movie the same size it was in normal view. Anybody know how to fix this?

I'm having the same problem. Never had the issue before I upgraded to iTunes 9. I'm running a MBPro 2009 with MacOS 10.6.3. Interestingly even though the "full screen" only makes the image about 1/2 the size of the actual screen, I think it is playing a full resolution. I can make play in a separate window (for example by clicking on the lower left image in iTunes) and make it "fit to screen" and the window becomes full height of my screen. But then going to "full screen" does the same thing described.

ITunes 10.2.2.12 crashes system with full screen visualizer

Can't seem to find a useful answer. 1 year old HP Pavillion running Win 7 (fully up to date), Core 2 Quad Q8200, 64-bit, 4Mb L2 cache, 6Gb DDR3, NVIDIA GeForce G210. A few months back I noticed that whenever I had iTunes full screen visualizer running, after about 1/2 hour or so (time varies but seems to play for a while before crapping out) my system would freeze and become completely unresponsive, requiring a hard power-down (keyboard and mouse - dead, monitor displays "no input signal").
I do not have this issue when visualizer isn't running. Also don't see this happening (yet) when visualizer isn't full screen.
My first round with this led me to believe there was a conflict with Windows going idle and iTunes not working with Windows to keep it active. So I disabled my idle times completely and that seemed to resolve it. Was able to listen to hours of playback without issue. Now, this week, it started happening again. Play iTunes, turn on full screen visualizer, after a short while sound will stop, screen will die, system will freeze.
Not interested in rolling back to earlier versions of iTunes. I want iTunes to work properly. I can't use it if it doesn't work.
Ideas on what I should be looking at/for? Video card problem? Temperature problem? ???
I work in IT, but not with hardware, so this is a little outside my area.

update: it's starting to happen much more quickly and frequently - basically all the time now. last time was 43 secs into the first song. I can no longer use the visualizer at all. This is the first real problem I've had with this machine since purchasing it 1/2010.
To clarify a little: my system doesn't go "dead" - if it means anything the indicator lights are blue whereas they're orange when inactive. It's the UI that dies - no signal to the monitor, no sound, no mouse or keyboard input, and no way to move forward without pulling the plug and restarting. Everything seeeems to come back ok when I restart, although I did start having wireless issues yesterday (a 3yr old linksys N). Separate issue or not, not sure.
I'm thinking it's gotta be hardware related, but i've been wrong once before.
Basic out of the box box:
64 bit Quad-Core
Intel G43
NVIDIA GeForce G210
512MB DDR2 dedicated to graphics
PCI Express 2.0 x16
Memory:
6GB DDR3 1066, max 8GB

Can't set window's title when full screen

Hello. I have seted window's title in Property Inspector, but
it isn't show it on the system Toolbar when full screen publish
setting.(Director 11 )
But it's OK when It isn't full screen.
Thanks.

what do you not understand in the mode "FULLSCREEN"????
Wolfgang
(full scream)

Motion output for Full Screen Computer Viewing

Hello,
i'm working on a project that needs to be able to scale. They want to be able to play it on a projector screen, tv, laptop, etc. What is a good project preset for this? I made a dvd of the project but when it's shown at full screen on a 15" laptop, it looks fuzzy. Is there a standard way to handle this kind of issue?
thanks.

NSC video is 640x480 pixels (more or less) and that's all. You cna make the pixels larger but you can't get any more of them. What you've got to settle on is the level of acceptable resolution required to pull it off. Then you decide on an application that will playing it back. Then you decide on how to do the production. Your output format isn't as important yet as figuring out what it's going to play on. SD DVD is out because of limited rez. QT can play h.264 at remarkably high density. But not many PCs will handle h.264 without a bit of help. Flash could be your playback app. You've got to consider each for availability within your organization, local expertise, and likelihood of completion.
Most data projection systems will go quite high. IN fact, when fed standard video, the image tends to get really crunchy because it is being heavily processed; a small number of video pixels are being processed to fill the much larger number of projection pixels.
You're going to be making lots of tests and you've got to get everyone to understand some compromises are necessary. You might want to get outside help, try your local Macintosh user group?
This is going to be a very difficult project but the next one will be easy.
bogiesan

How to output Macbook Pro VGA to LCD TV in full screen mode?

I Have a Macbook Pro 2007 with DVI to VGA output. I have connected it to my Toshiba LCD TV and am able to get a screen image on the TV without any difficulty. The problem is that the TV display is not full screen. I can't find any way to increase the size of the picture on the TV. Is this a limitation of the output or the TV display?
Thanks for any help.

Hi Macbook17Pro,
Thanks for visiting Apple Support Communities.
You may need to set the resolution on your Mac's display settings to match the resolution of your tv.
See this article for more information on using multiple displays:
How to use multiple displays with your Mac
http://support.apple.com/kb/HT5019
Best Regards,
Jeremy

I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?

I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Receiving phone call will in full screen mode

There's an annoying problem with the new continuity function for receiving phone call on Yosemite.
Let's see i'm watching a video in full screen mode, then i receive a phone call, the video Hide itself (Mission Control) but did not pause.
So if i answer the call, i still have the sound from the video, and i have to go in Mission Control (yes i'm using shortcut) to show the application to pause it.
First i would like the video to pause if i answer the call, and if not it disappear without hiding my video.
I would like to have the same notification has the Messages, when i receive and SMS or iMessage, there's a small notification rectangle that appear over the video and disappear after few second.
Both Message and FaceTime have the same settings in the Notification System Preference.
I've tried everything that i know, made some research on the internet with no luck.
I've tried that on 3 different macs (Mac Pro 2008 with upgraded Bluetooth card, MacBook pro Retina and Mac Mini) using iTunes, Quicktime, VLC and Safari for viewing full screen video.

Check the software/game settings
*** Say 'Thanks' with Kudos ***

Output to phone isn't full screen

Similar Messages

Maybe you are looking for