Output type determination in Billing document

Hi,
I have a query reg automatic determination of output type in the billing document. The scenario is, For an invoice, two output types are determined automatically for all invoices. But the third output type is determined based on Shipping point. For Example say, output type IFIB should be determined if Sh.pt is A and IFIT if sh.pt is B. This is controlled thru "Requirement" assigned to the output types in output det procedure.
The problem is, for a particular document IFIB appears though the sh.pt is B, Now i have to find out whether it is determined automatically or manually. I have checked the following
1. The "manually changed" field is not flagged in the "further data" of this output type. I believe, if it is not ticked, then the output type is determined automatically and no manual change was carried out. Am I right?
2. When i checked the "determination analysis", I find that the output type with the message "Output ignored (Requirement not fulfilled)". If the output was determined automatically, then "output xxx found" should appear right? When the analysis says it is ignored, then how come it can appear automatically?
I am confused over this contradictory findings. Plz tell me whether my assumptions stated above are right. Kindly suggest me alternative ways to find out whether it is determined automatically or manually? If it is determined automatically, on what conditions?
Thanks in advance
Suresh

Hi Suresh,
In an output determination, it may tell  u that the output type is ignored because of un-fulfilled requirement, but it will still automatically appear in Header-> output, but u need to check the actuall processing status, whether is 0,1, or 2. I assume for your case it will be 0 (not processed, meant for manual processing instead), 1 (processed) and 2 (error occurred).
Another thing which is essential is that, in order to let the system successfully fulfill your determination criteria, u need to assign output type with correct access sequence, for example 1 access sequence by sales org/billing type for output, another 1 is by sales org/shipping point. Or u can simply create 1 access sequence with 2 condition tables.
After that u need to create condition record for each output type, u do this in t-code VV31.
By rite, during transaction (issue output), system will be able to search for those condition record and output type will be automatically appear, providing if there is any rquirement routine in your output det. proc (appl = V3) returns TRUE.
Cheers,
Benny Andre

Similar Messages

  • Multiple Output types to existing Billing document type

    Dear Gurus
    I have a requirement. I need to assign multiple output types to existing Billing document type. But there is only one output type/procedure can be assigned in the Billing document type. My client wants another print output format for the same document type. I can get a new smart form created and assigned to the output type.
    But wher would i assign that to the billing doc type? Or is there any other way out?
    Can u pl help me out?
    Thanks in advance...
    regards
    Gansub

    Hi,
      Create a new output type and assign the new smartform and program and add this new output type in the existing procedure assigned to the billing document type.Maintain the condition record inVV31 for this new output type.So both existing and new output type will be available in the billing doucment to take the print out.
    Regards,
    Gopal.

  • Need Billing doc. number based on header Output type and also billing docum

    Hi
    I have header Output type and also billing document type.
    will you please help me to get the billing document no. based on above combination, any SAP table, i was aware about the same. but i forgot the table name.
    Thanks
    Vanraj

    Hi,
    Check the Table NAST for the Billing documents associated with the OUTPUT type.
    regards,
    santosh

  • Repeat Output-Type determination

    Dear all,
    We have a new output-type for printing invoices. Now we have to reprint a lot of "old" invoices with this new output-type.
    Is there a possibility to repeat the output-type determination for a big quantity of invoices (like mass change)?
    Thanks for your reply.
    Best regards,
    Thomas

    Hi,
    Use the T.Code "VF31" for this purpose.
    Goto the T.Code "VF31".
    Give the Output type.
    Give the transmission medium.
    Give the processing mode as "1" if it is for the first time.Else give the value as "2" for repeat processing.
    Enter the sort order as "01".
    Enter the billing document number range.
    Regards,
    Krishna.

  • Output Settings for a Billing Documents

    Where do I make the setting for output for a specific billing type. I will use the standdard layout for testing purposes.
    Thank you.

    Hi,
    Go to SPRO --> Sales and Distribution -->Basic Functions -->Output Control -->Output Determination -->Output Determination Using the Condition Technique -->Maintain Output Determination for Billing Documents
    -->Maintain Output Types (V/40). Here you should select the Standard Output type for Billing RD00. If you want to copy, you may copy the standard and Rename it ZRD0.
    Then assign the condition type ZRD0 to the Output determination procedure V10000 in Maintain Output Determination Procedure.
    Then Assign the Output determination procedure V10000 with the Billing type F2 in Assign Output Determination Procedures.
    Then maintain the condition record in VV31.
    Regards
    M. Lakshmi Narasimhan

  • Maintain output condition table for billing documents

    Hi
    I need to create new output condition table for billing document with the key combination of "Billing type and Export Indicator". In Field catalog: Messages for billing documents I am able to find field Export Indicator but the same field i am not able to find creation of new condition table (V/63).. Kindly let me know is there any settings required to show the same in V/63.
    Thnaks
    Srinivas

    Hi Ram
    The filed already is there in in structure" KOMKBV3" ....
    Thanks
    RAO

  • Multiple output type against a billing type

    Hi All,
    I have a small requirement, I have created 2 output types and I want to assign it to the same billing document.
    As per requirement, I can choose 2 different prints for same document.
    But, when I am checking through issue output to through a billing document no., its only showing a single output type.
    Please guide me on the missing settings aspect.
    I have maintained the condition record also for billing docs through VV31....

    Hi Aurin,
                   Have your created  different access sequences for both the out put types? You  have to create the the condition records for both. These output types should be there in the procedure which has been assigned to the billing type.In the Condition Record you have to maintain the communication strategy aswell.There  will be a check box "Print Immediately. Tick that check box and check If there is any requirement has been assigned to the Access Sequence. Some times the Access Sequences have Requirements associated with it(Unless until some conditions get fulfilled you wont be able to generate the output). Last but not least try to enter the second out put which is not getting picked up and it should tell you why its not getting picked up. Kindly please let me know If you could solve it.
    Regards
    Ram Pedarla

  • Text determination for billing document

    pls tell me text determination for billing document.pls tell me each and every phace for text determination for header billing document;
    when am creting text determination am getting so many problems,
    i saw in text form in header text,but i didnot get it in  out put invoice,
    pl send each and every phace of the text determinations,if possible send screen shots for text determination,
    its urjunt

    hi
    1) T-code VOTXN ,for the text object Customer>Sales and distribution>click the Text types-->create your 4 digit Text ID
    2) Come back to initial screen of this t-code and again selct the text object Customer-->Sales and distribution and click change. Select the text procedure and double click on the Text IDs in text procedure.Here you create a new sequence and select the 4 digit Text ID you have created initialy.
    3)Asign the Text procedure which you have selected in step2 and double click onText procedure assignment .Here you assign the Text ID to the Customer Accout group.
    4) In the customer master,sales area tab>Extras menu>text,Select the text which you have created now and enter text into it. and save.
    The text which you have created now ,can be used for multiple purpose(Ex.sales order,delivery,billing,pricing,inforecords,legal). for example in this case, You just want to display this text during sales order processing,then proceed as follows,
    5)T-code VOTXN ,for the text object Sales document>Header>click the Text types-->create your 4 digit Text ID.
    6) Come back to initial screen of this t-code and again selct the text object Sales document-->Header and click change. Select the access sequence and create new acces sequence(This access sequence is similar to that of in Pricing).Select this acces sequence and double click the access sequence for text ids.Here in the first column this is Serial no.second column is text object(This is the area from which text has to be refer.In our case we have created the customer Text object for sales and distribution area,so i.e.KNVV) and the next column is Text id,This is the id which we have created at customer text object for sales and distribution initialy,at step 1). The next column is partner function,it will identify for which parter this text has defined.Next 2columns are Languages(if you want to define for all langugage or specififed language),next column is for specified languge for partner function.if you have any requirement to be fulfilled you can create those requirements in the next columns or else leave blank,save and come back to text proceudure.id.
    7)Select the text procedure(for ex.01-Sales header) and double click on the Text IDs in text procedure.Create new entries Fill in the sequence and the text id which we have created for sales document-header(in step 5).There is a small check box in the 3rd column which is used whether the text should be refered or copied(this is used if you want to modify the text during the sales order processing or just dispaly the originail text as it is),next column is whether the text should be displayed while creating or it is not obligatory, last column is acces s sequce,this is nothign but the sequence which we have created in step 6) and save.
    8)in the final step assign the text proceudre id to the particualre sales order.

  • Table for output type of a delivery document

    Hi guys,
    Would you know where could I find the output type of a delivery document espcially after I posted a GI in Shipment? Basically, It should reflect in devlivery document. So I am not sure if I should look at the delivery tables or goods issue.
    Help me guys!
    POints for the helpful ideas.
    THanks!

    Hi,
    There are 2things to be noted here.
    1. If your output type was already triggered once, then it should be visible in display mode also, with a Green colour button (if it is processed and the print out  is obtained). The fact that the output type is not seen in display  mode, says that the output type so far has nto been triggered.
    2. Seeing the output type coming in yellow colour in change mode of delivery document is expected. This means that the output is getting triggered now.If you save teh document now, you will get the print out.When you go in display mode again after a gap of say 1min, you can see the same output in Green colour as mentioned earlier.
    I hope this clarifies your doubt.Please let me know if you need some more info
    You can reward me if it helped you

  • Picking output type determination

    Hello,
    In fact, the output type determined by the system for the picking is EK00.
    Now, I need to create a new output type and determine it or EK00 depending on the user (in order to use a printer on another).
    By the moment, I have created an output type called ZEKS using tcode V/38 and I defined the program and form using V/53.
    Now I'm stalled, where can I configure the output determination and conditions tables for the picking output types?
    I found a transaction called ovlt where expedition point and output type is informed, but I can't add any information there.
    Thanks in advance.
    Ricard.

    Hi Oscar,
    Picking Output Type is determined in transaction v/23. You can only have one per shipping point unfortunately. If you need more flexibility, you should use delivery output or lean WM and transfer order output.
    Best regards,
    Stratis

  • Tax code determination in billing documents

    Hi,
    In the intercompany billing document, system has picked tax condition type(MWAS) value as 19 percentage with condition records.
    We have not maintained any condition records for that tax condition type. We have maintained that vale only in tax code settings under one country.
    How system is picking that tax vale in to billing documents with reference to condition type.
    Regards
    Lakshmikanth

    Tax rates are maintained in tax codes via transaction code FTXP. All tax condition elements are maintained via OBYZ (OBQ1 for tax condition type, OBQ2 for access sequence, and OBQ3 for tax procedure). And each country is asssigned a tax procedure via OBBG. In your case, MWAS must exist in OBQ1 and the corresponding tax procedure, the rate of MWAS must have been entered in the tax code of output tax type.  The SD condition types with condition category D and with the account key for tax (such as MWS) in the SD pricing procedure are used to determine the tax code during document processing.
    To find out how this tax code is captured, on the condition tab in the billing document, click on the Analysis and locate the SD condition type(s) for output tax, identify which record is read. Then on VK13, enter this condition type and specify other selections, the condition records for tax code determination appear.

  • Automatic Output Type Determination

    Dear All,
    I have a situation where I want my system to determine which Output Type to be selected automatically, by which I dont have to select for the particular output type.
    Can u suggest me some input pls ?
    Rgds,
    Indrajit

    Hi Indrajit,
    For Automatic Output Determination
    1. Use Condition Technique
    2. Create  Condition Records
    You need to maintain ouput condition records from below T-Codes
    T.Code: VV11 - Sales Documents for Sales orders (Output type = BA00)
    T.Code: VV21 - Shiiping Activities  for Deliveries (Output type = LD00)
    T.Code: VV31 - Billing Dcouments..for Billing   (Output type = RD00)
    T.Code: VV71 - Shipment              for Transportation
    T.Code: VV61 - Handling Units       for Packaging
    T.Code: NACE (Group)
    Just maintain them and you will get the output type automatically.
    It will help you,
    Regards,
    MH

  • Output Type determination with BAPI call

    Hello SAP experts,
    Thank you in advance for any guidance or ideas you may have.
    We are modifying an outbound delivery document with the following functions:
    bapi_outb_delivery_change and ws_delivery_update
    and we need to cause an outbound type to be determined(executed) 
    This process works when we post goods issue manually but does not work when we post goods issue via an ABAP program using the above mentioned functions
    Sincerely,
    Jim

    Hi,
    For Output determination the condition technique has to be followed.
    1) Maintain Output condition table -V/57
    2)maintain Access sequence
    3)Maintain Output condition type-V-30
    4)Maintain Output determination procedure
    5)Maintain condition records in VV11
    Besides you should also assign the Output types to Partner function
    Assign Output det.pro to sales document header & sales document type (eg: OR)-V/43
    Assign Output det.pro to Item category-V/69
    The condition types for Output in your case is BA00(standard).
    Have you done all these ?
    I hope this would be helpful for you.
    Saplinx

  • Output Type Determination

    Hi experts,
    I have a requirement wherein if an EDI invoice output type is selected during the creation of the billing document, then all the remaining output types below that should not be selected. Please find below the screen shot of the output procedure used. Whether a customer is relevant for EDI output or not is based on different values provided in different fields and the business do not want to follow that approach.
    Please provide suggestions/pointers to achieve this requirement.
    Thank you,
    Som

    Hi
    In my opinion yes. In table NAST there will be a record ofr ZINV. Taking the VOFM 101 as a template (your EDI output is ZINV), maybe, your VOFM 901
    PERFORM KOBED_062.     "call vofm 62
    LOOP AT XNAST WHERE KSCHL EQ 'ZINV' AND
                                            OBJKY EQ MSG_OBJKY   AND
                                           AKTIV EQ SPACE       AND
                                           VSTAT EQ '0'.
        EXIT.
      ENDLOOP.
    IF sy-subrc = 0.  "it was found
    sy-subrc = 4.     "output not created
    ELSE.
    su-subrc = 0.
    ENDIF.
    Create your VOFM (remember the note I told you in my first answer), and change the VOFM 901 for the other output types different to EDI.
    Although it's for pricing, see also SAP Note 156230 - Requirements: What is permitted, what is not?.
    After, debug it and fit to your requirements. During the debugging, check how XNAST is populated.
    I hope this helps you
    Regards
    Eduardo

  • Output Type Default for Sales Document Header

    Hello,
    I have defined the Output Type ZTER and have assigned it to a print program and a form.  Now when I go to transaction VA03, in the Menu Bar select Sales Document -> Issue Output to, I don't see my new Output Type ZTER present.  I have to manually add it using VA02 and Extras -> Output -> Header -> Edit in order to add this Output Type. 
    My question is, how can I make it default to show when I select the Menu Bar (Sales Document -> Issue Output To) and then a prompt box comes up to allow the user to select.
    A bit of addition information, I have already maintained the Output Condition
    Thanks.
    Edited by: jamison2004 jordan2004 on Aug 26, 2008 10:57 AM

    Hi jamison,
    please check output determination and you need to maintain condition records(like with sales organization and condtion type etc)of  output type via tcode NACR. while saving the sales order it will condition records and populate output types automatically.
    Tks... Venkat

Maybe you are looking for

  • Exporting OS X Mail from Mountain Lion to Snow Leopard

    After upgrading to Mountain Lion, I partitioned my iMac HD to have two partitions: Macintosh HD has Mountain Lion; I reinstalled Snow Leopard on Macintosh HD 2. Best part: you can access your user-created files from EITHER disk partition. But not so

  • Help! Why is my 12" White iBook screen Black?

    Help! When I turned on my iBook, the White apple appeared center screen, then the screen became whitish gray. Thinking the operating system was lost, I erroneously tried a Pismo trick. I turned it off, then rebooted while holding down the X key. It h

  • CFL For Item groups

    hi, I need to set a item groups in cfl for  user defined form thanks & Regards B.Lakshmi Narayanan

  • Help on POS & POS DM---very Urgent

    Hi All, I am BI consultant and working for Retail Project. Correct me for my understanding. First off all the POS is not SAP POS. Client is not going to use SAP POS. But SAP POS DM is in scope. So data from non SAP POS will flow to SAP POS DM via use

  • [Ai] Align Text Script

    alinear texto en illustrator... ...cambiar el Alineamiento a Centrado....al estilo Illustrator... ...usando este script... descargar selecciona uno o mas Objetos (Text Frames) antes o despues de empezar el script La nota en ingles dice que la opción