Output type & example sales doc

Hi all,
As we all know, we can get example billing doc which use the definited output type to print through T-code: VF31.
Similarly, we also want there existed T-code which can help us to find the example sales doc which used the definited output type.
But finally, we found it is impossible.
Anyone can do me a favor?
Thanks for reading this info.

Good Morning!
Please note that you can use transaction VOK2.
At the top of the screen select "SD Document".
In this dropdown list you can select which type of SD document output you wish to view. You can choose between viewing the output types, access sequences, determination procedures etc.
Another useful transaction is NACE which works in a similar manner.
I hope you find this helpful!
Martina McElwain

Similar Messages

Add an output type in sales order header

Hi Dear Experts,
I try to find a way to add an output type in sales order header after the order was created.
I also need the output to be sent immediately to the FAX.
Do you know any BAPI or Function that can help me or have any idea how it can be done?
Thanks and best regards,
Sagit.

Hi,
You can use the FM ..RV_MESSAGE_UPDATE..
Thanks
Naren

User exist for controlling the OutPut type in sales order

Hi
Is their any exist which controls the output type based on header data of the order? VA01/02.
Best regards
Satish Kumar K

Hi,
IN the VOFM routine you can use the structure KOMKBV1 which will be populated with the sales org (VKORG), division (SPART) and order type (AUART).
Example
SY-SUBRC = 4.
IF KOMKBV1-VKORG = '0001' AND
KOMKBV1-SPART = '12' AND
KOMKBV1-AUART = 'ZXXX'.
SET THE return code to 0 to propose the output type.
SY-SUBRC = 0.
ENDIF.
Hope this helps..
Thanks,
Naren

Default Output Type for Sales Order Header

Hi Guru
I created 2 output types for hardcopy printout and for mail.
I want both should be selected as default when a sales order is created. (using NACE)
Output will be manually from VA02 -> issue output to. Here I must get 2 output types.
As of now, this is manual process.
Please help.
sunil Kolambkar.

Hi Sunil,
For this you need to maintain condition record for output type. for the sales order type, [V V11].
Do the output determination in the same way as Pricing procedure determination.
OUTPUT DETERMINATION:
SPRO- IMG- Basic Functions- Output Control- Output Determination- Output Det using Cond Tech- Output Det for Sales Documents & output det for billing documents.
Create Condition Table: select the field Sales Doc Type from field catalog & Save
Maintain Access Sequence: 4-digits code & description.
Assign condition table to access sequence. Select Accesses line item and Go To Fields. Fields will display the fields we have selected in the condition table i.e. sales doc type.
Maintain Output Types:
AF00: Inquiry
AN00: Quotation
BA00: Order Confirmation
LD00: Delivery
Select BA00 & Copy & Rename. Give the same 4-digit code as given to acc seq.
You Can Maintain:
Languages of Output
Partners (to whom we want to send output)
Print Program- print specification
Sap Script- layout
Assign Output Types to Partner Functions: go to new entries & assign your output type to partner functions.
Maintain Output Determination Procedure: V10000 (Standard Procedure). Go to new entries & create your own 6-digit code with descp. Select the procedure & go to Control Data. Here mention the output type i.e. cond type & leave requirement and manual only columns as blank.
Determination Rule: link the 6-digit procedure code to doc types.
Create Condition Records: VV11. Select document type and click on Communication. Mention partner function, medium, time. Output device: LP01, Spool request Name: SD_003, Suffix 2: order_confir & flag on print immediately.
Once you press enter you will come across 2 key combinations:
Sales organisation/ Customer Number: fill SO, Customer No, Partner Function Abbreviation, Partner to whom the output should be sent, time, medium, language. {It contains: Sales Orgn, Customer, Partner Function (The abbreviated form of the name that identifies the Partner) (During output determination, the system determines the recipient of the output from the master record for the specified partner function. In this field, you can explicitly specify a recipient that will override the standard partner. There must also be a master record for the partner that is specified explicitly.), Medium, Time & Language.}
Order Type: Document Type, Partner Function (abbreviation), Partner, Medium, Time & Language.
Hope this would be helpful.
Regds,
Rupali

Output type config -- Sales Order

Hi All,
We have a requirement where we need to trigger a custom output type for the condition "Sales Org./ Div./Doc. type/Plant (Item)". This should be triggered at the header level. The settings have been done. Now while creating an SO, the output type is getting triggered automatically only when I check for the output at item level and then come back to header level. In case if I don't check the output at item level, the output type at the header is not getting triggered automatically.
Please let me know of any work around to get this done.
Thanks,
Raj.

Hi Mohit,
Go to [VA02], using the standard toolbar select Extras -> Output -> Header / Item -> Edit and go to the Output Screen. Again using the standard toolbar select Goto -> Determin Analysis. Now select your output condition type and see what could be the reason for why the output type has not been picked.
Regards
NP

Incorrect requirements type in sales doc.

HI,
Due to incorrect requirements types of material the costs and sales volume are posted directly to sales doc instead of posting
to WBS element.
How can this be fixed (after cancellation of posting)?
How can we identify already created u201Cincorrectu201D sales docs?
Regards,
Anup
Edited by: anup12 on Jun 3, 2011 7:29 AM

Hi !
regarding your query, there may be various sales documents type which might be created during configuration.
Some of these might not be required by end users and need to be blocked so that wrong document types are not chosen. so an indicator 'X' is placed againt these document types and these can not be used.
There may be some documents wherein manual creation might not be allowed, and auto creation is desired. so againt these doc types-'A' is placed by which these doc types can not be created manually,
Other sales doc types might not be blocked so that they can be used or created manually, hence kept blank against the indicator field.
Plz reward point if useful.

Triggering output type when sales order is saved

Hello all,
            I have a small question. Whenever I create a drop ship sales order it triggers a custom output type and prints the form by default even though this output type hasnt been saved in the sales order messages. Similarly from a drop ship PO when it is created with reference to the drop ship order and a requisition it tries to call this cusotm output type and prints the form.
Please advice how to find the settings and make it not print this form.
Thanks in advance.

Hello,
         There are few other custom output types configured for a sales order. I wonder why it picks this particular output type and prints the form.
         If I uncheck 'Print Immediately' then would it stop from just printing or even calling the form too.
          Please advice if there might be any other config which tells to call this particular form whenever a drop ship sales order is created.

OUTPUT TYPES FOR SALE ORDER(VA01)

Hi All,
When i create a sale order, the data can be downloaded thru output type BA00 & standard program RSNASTED into SAPScript, but i wanted to download it to internal table. Can u please tell me the changes to be made after copying the standard program into Z... Program.

Hello Rafi,
Better U debug the report. Since the data will be in the internal table, if it is downloaded to the Script. So u no need to copy and make the changes.
Vasanth

How to add a new output type in sales order header via ABAP program

Hi All,
I have to add new output type (ex Z001) in sales order header via an ABAP program. please let me know how to do this.
Thank you all in advance.

Hi,
You can use the FM ..RV_MESSAGE_UPDATE..
Thanks
Naren

Output Type in Sales Order

Hi All.. Output type is not automatically selecting/ coming in sales order.. Condition record has been maintained in VV11 and I have also checked the configuration which seems okay to me.. Pls suggest where is the problem?
thanks in advance

Hi Mohit,
Go to [VA02], using the standard toolbar select Extras -> Output -> Header / Item -> Edit and go to the Output Screen. Again using the standard toolbar select Goto -> Determin Analysis. Now select your output condition type and see what could be the reason for why the output type has not been picked.
Regards
NP

Output Type on Sales Order delete

Is it possible to activate Output Type, sending iDoc, on Sales Order deletion?
On Sales Order create, change it works well, but not on delete.

hi,
this is Possible.
but it is not possible through Message Control ..
you need to write custom program..
that program read deletion data from CDHDR and CDPOS table and append data to idoc and post.
Prabhudas

FM to update output type in sales order

Hi folks,
my problem it's the following, if you update a sales order in tcode va02 and I change the status, automatically it's assigned the output type to this status, that is working fine, I'm maintaining a report that it changes the status to the sales order but kind of the output type is not maintained, somebody knows a FM or Bapi to update the output type?
Many thanks.

Please check the BAPI BAPI_SALESORDER_CHANGE
*" CONDITIONS_IN STRUCTURE BAPICOND OPTIONAL
COND_TYPE
Kanagaraja L

Regarding output type for billing doc

i have one billing doc. i want to find out type for that billing doc. through that i need to find the program name and form name.
i have lot of out put types. In that how to find the out put for my requirement

HI pavan,
It is not a good idea to check with the Program name or Layout set name without knowing the OUtput types because, Billing docu number can work with multiple Output types...you never know it. So in your case to check TNAPR table would be the best option...but again it is never recomended to go ahead without knowing the output type.
And for one Output type there will be only one smart form/ script form and a Zprogram will be configured.
It is not possible to configure multiple Smart forms for a same Output type.
You can use single smart form in Multiple Output types but not single output type for diff Smart forms.
Try to either know the smart form/script from name or the Zprogram so that you can search it in TNAPR table or by using Where used list icon.
Regards,
Kittu

Email Output type : No Automatic trigger of output type while saving doc.

Hi Gurus - To trigger an email from the output type, I've configured a output type with medium as 5(external send) with communication strategy and created condition records with medium as 5 to trigger immediately.
While creating corresponding document, the output is not automatically determined, it required to manually feed the output type every time. Can you please provide if any settings were missed to trigger immediately!!
In Output analysis showing a message as "No print data determined for the communication strategy"
Steps:
1. Configured the output type with Medium as"5" and associated partner functions.
2. Created the condition records with medium as 5 and trigger immediately.
Thanks,
Sree

Hi ,
while maintaining condition record for output type when you click on communication method, give logical destination as 'LP01'.Hope this will solve.PLease let me know if you have any issues on this.
Thanks and regrads,
Rajeshwar

Output type in Billing Doc

Hello,
I am having a requirement, I need to pick an output type in transaction VF02 based upon some conditions.
We can't to this through NACE transaction since it requires some custom table involvement and it is not possible to handle those conditions through NACE.
Is there any BADI or User-exit is available for VF02 Transaction. which will get trigger while selecting Output and where we can change the NAST entries

Hi Nav ,
let me know what kind of logic do u want to put for Output , based on that i can say which one u can use .
Regards
Peram

Output type & example sales doc

Similar Messages

Maybe you are looking for