Output type for printing payment voucher

Dear freinds,
Can any one tell me what is the output type for printing Payment Voucher.
Thanks & Regards,
Santosh.

For FI config will be done by the functional team you may not see it in NACE tcode, do consult your functional consultant...
Close the thread once your question is answered.
Regards,
SaiRam

Similar Messages

Maintain Output type for invoice

Hi experts ,
I am using a bapi "BAPI_BILLINGDOC_CREATEMULTIPLE" for inter company billing and its working fine but it is not maintaining the output type for print this invoice from vf02/vf03 ...
Is there any BAPI to save the output type and device whenever invoice document is created ...
Thanks & Regards
Alok Vishnoi

Hi Alok,
Output types need to maintained in the system through transaction NACE. Your program would be triggered by a concept called message control.
For maintaining your program and the corresponding smartform you need to know the correct application area for its maintenance in NACE. For this you need to take the help of functional guys to determine the output type that your program is triggereing and the necessary maintenance that needs to be done.
In order to understand the concept of message control please go through the link below:-
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm

Creating Format type for printing ALV output.

Dear Friends,
I am using a format type for printing ALV output print which displays 65 rows and 255 columns on DINA4 page. I want to create a format type which will print 65 rows and 310 columns on 'LEGAL' page format .
So plz suggest the ways along with help links if any.
Regards,
Madan.

Hi Mandan,
As long as I know the maximum column for printing is 255.
Might be you can split your output into 2 rows...
Regards,

Custom Report to list Output type to Print Program link

Has anyone achieved this? Can anyone give hints as to the tables where I would find this information?

Hi ,
table TNAPN contains the Output Control: Output By Partner Function information..
select KSCHL '' output type
from tnapn
into table itab
where KAPPL = 'EF' " application Purchase Order
and NACHA = 1 . " transmission medium for print output
gives the list of 'Output Types' for application Purchase Order and for transmission medium -print output.
hope it helps.....
Regards.

Output type for the managed codes cut letter is hard coded

Hello,
Very Good afternoon!
I have a requirement to create new Output Types for a Smart Form.
The already existing Output types are hard coded as shown Below :
CONSTANTS : c_kschl_order LIKE nast-kschl
 VALUE 'ZUS0',
 c_kschl_order1 LIKE nast-kschl
 VALUE 'ZUS1',
Now they do not want to use ZUS1. Insted they wnat to use New Output Types.
u2022 Remove ZUS1 as we no longer use this one.
u2022 Add ZAU0
u2022 Add ZNZ0
u2022 Add ZJP0
u2022 Add ZCN0
u2022 Add ZKR0
How to add these Output types without Hardcoding as shown ABove.
Any Suggestions will be appreciated.....
For reference..I will paste the code of the Program here.
Here is the code :
 PROGRAM DECLARATION
PROGRAM ID Z_RVADOR01_SALES_CUT_LETTER
TABLES: vbak, "Sales Document: Header Data
 vbap, "Sales Document: Item Data
 vbpa, "Sales Document: Partner
 vbep, "Sales Document: Schedule Line Data
 kna1, "General Data in Customer Master
 MARA, "Material Master
 KOMK, "Communicationarea for conditions
 KOMP, "Communicationarea for conditions
 KOMVD, "Communicationarea for conditions
 VBCO3, "Communicationarea for view
 VBDKA, "Headerview
 VBDPA, "Itemview
 VBDPAU, "Subitemnumbers
 CONF_OUT, "Configuration data
 SADR, "Addresses
 TVAG, "Reason for rejection
 VEDKA, "Servicecontract head data
 VEDPA, "Servicecontract position data
 VEDKN, "Servicecontract head notice data
 VEDPN, "Servicecontract pos. notice data
 RISERLS, "Serialnumbers
 KOMSER, "Serialnumbers for print
 TVBUR, "Sales office
 TVKO, "Sales organisation
 ADRS, "Communicationarea for Address
 FPLTDR, "billing schedules
 WTAD_ADDIS_IN_SO_PRINT, "additional
 WTAD_BUYING_PRINT_EXTRA_TEXT, "texts belonging to additional
 adrc,
 adr6,
 t247.
INCLUDE RVADTABL.
INCLUDE RVDIREKT.
INCLUDE VEDADATA.
data for access to central address maintenance
INCLUDE SDZAVDAT.
TYPE-POOLS: ADDI.
DATA PRICE_PRINT_MODE(1) TYPE C. "Print-mode
DATA: RETCODE LIKE SY-SUBRC. "Returncode
DATA: REPEAT(1) TYPE C.
DATA: XSCREEN(1) TYPE C. "Output on printer or screen
DATA: BEGIN OF STEU, "Controldata for output
 VDKEX(1) TYPE C,
 VDPEX(1) TYPE C,
 KBKEX(1) TYPE C,
 KBPEX(1) TYPE C,
 END OF STEU.
DATA: BEGIN OF TVBDPA OCCURS 0. "Internal table for items
 INCLUDE STRUCTURE VBDPA.
DATA: END OF TVBDPA.
DATA: BEGIN OF TKOMV OCCURS 50.
 INCLUDE STRUCTURE KOMV.
DATA: END OF TKOMV.
DATA: BEGIN OF TKOMVD OCCURS 50.
 INCLUDE STRUCTURE KOMVD.
DATA: END OF TKOMVD.
DATA: BEGIN OF TVBDPAU OCCURS 5.
 INCLUDE STRUCTURE VBDPAU.
DATA: END OF TVBDPAU.
DATA: BEGIN OF TKOMCON OCCURS 50.
 INCLUDE STRUCTURE CONF_OUT.
DATA: END OF TKOMCON.
DATA: BEGIN OF TKOMSERVH OCCURS 1.
 INCLUDE STRUCTURE VEDKA.
DATA: END OF TKOMSERVH.
DATA: BEGIN OF TKOMSERVP OCCURS 5.
 INCLUDE STRUCTURE VEDPA.
DATA: END OF TKOMSERVP.
DATA: BEGIN OF TKOMSERVHN OCCURS 5.
 INCLUDE STRUCTURE VEDKN.
DATA: END OF TKOMSERVHN.
DATA: BEGIN OF TKOMSERVPN OCCURS 5.
 INCLUDE STRUCTURE VEDPN.
DATA: END OF TKOMSERVPN.
DATA: BEGIN OF TKOMSER OCCURS 5.
 INCLUDE STRUCTURE RISERLS.
DATA: END OF TKOMSER.
DATA: BEGIN OF TKOMSER_PRINT OCCURS 5.
 INCLUDE STRUCTURE KOMSER.
DATA: END OF TKOMSER_PRINT.
DATA: BEGIN OF TFPLTDR OCCURS 5.
 INCLUDE STRUCTURE FPLTDR.
DATA: END OF TFPLTDR.
DATA: TADDI_PRINT TYPE ADDI_SO_PRINT_ITAB WITH HEADER LINE.
TYPES:BEGIN OF ty_orders ,
 xblnr LIKE mkpf-xblnr, "delivery number
 erfmg LIKE mseg-erfmg, "goods issue quantity
 custname LIKE kna1-name1, "customer name
 bstnk LIKE vbak-bstnk, "purchase order number
 ean11 LIKE vbap-ean11, "upc
 kdmat LIKE vbap-kdmat, "customer material code
 arktx LIKE vbap-arktx, "description
 csrno LIKE kna1-kunnr, "customer service rep number
 spras LIKE kna1-spras, "customer language key
 csrname LIKE kna1-name1, "customer service rep name
 csremail LIKE adr6-smtp_addr, "csr email
 csrphone LIKE kna1-telf1, "csr telephone
 csrext LIKE adrc-tel_extens, "csr extension
 csrfax LIKE kna1-telfx, "csr fax
 total LIKE lips-lfimg, "cut quantity
 ldate(18) TYPE c,
 END OF ty_orders.
CONSTANTS: c_kschl_order LIKE nast-kschl
 VALUE 'ZUS0',
 c_kschl_order1 LIKE nast-kschl
 VALUE 'ZUS1', c_parvw_shipto LIKE vbpa-parvw
 VALUE 'WE',
 c_parvw_csr LIKE vbpa-parvw
 VALUE 'ZS',
 c_eng(1) TYPE c VALUE 'E',
 c_sep(1) TYPE c VALUE '/',
 c_sale(25) type c VALUE 'Sales Order'.
DATA: WA_VBAK TYPE VBAK,
 tbl_ord TYPE ty_orders OCCURS 0 WITH HEADER LINE,
 w_csrname(30) TYPE c,
 w_csrno(30) TYPE c,
 w_email LIKE adr6-smtp_addr,
 f_shipto_found TYPE c,
 w_custname(30) TYPE c,
 w_month(2),
 w_ldate(18),
 w_total LIKE lips-lfimg,
 w_lines TYPE i VALUE 0,
 f_mail(1) TYPE c,
 cnt_1 TYPE i VALUE 0,
 cnt_2 TYPE i VALUE 0,
 tbl_otf LIKE itcoo OCCURS 0 WITH HEADER LINE,
 w_type(25) TYPE c,
 st_doc_data LIKE sodocchgi1,
 tbl_objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
 tbl_line LIKE tline OCCURS 0 WITH HEADER LINE,
 tbl_attach LIKE solisti1 OCCURS 10 WITH HEADER LINE,
 tbl_objhead LIKE solisti1 OCCURS 10 WITH HEADER LINE,
 tbl_proc_para LIKE soparai1 OCCURS 10 WITH HEADER LINE,
 tbl_maillist LIKE somlreci1 OCCURS 10 WITH HEADER LINE,
 tbl_pack_list LIKE sopcklsti1 OCCURS 10 WITH HEADER LINE,
 tbl_cpo LIKE itcpo OCCURS 0 WITH HEADER LINE,"SAPscript output
 " interface
 tbl_cpp LIKE itcpp OCCURS 0 WITH HEADER LINE,"SAPscript output
 " parameters
 tbl_smtp TYPE szadr_adsmtp_line OCCURS 0 WITH HEADER LINE,
 tbl_cdhdpos LIKE cdshw OCCURS 0 WITH HEADER LINE,
 tbl_cdpos LIKE cdshw OCCURS 0 WITH HEADER LINE,
 wrk_lines LIKE sy-tabix,
 hltlines TYPE i,
 off1 TYPE p,
 fle1(2) TYPE p,
 fle2(2) TYPE p,
 htabix LIKE sy-tabix,
 hfeld(500) TYPE c.
FORM ENTRY USING RETURN_CODE US_SCREEN.
if sy-tcode = 'VA01'.
IF nast-kschl = c_kschl_order.
SELECT SINGLE * FROM VBAK INTO WA_VBAK WHERE vbeln = nast-objky.
IF SY-SUBRC = 0.
CLEAR RETCODE.
XSCREEN = US_SCREEN.
PERFORM PROCESSING USING us_screen.
IF RETCODE NE 0.
 RETURN_CODE = 1.
ELSE.
 RETURN_CODE = 0.
ENDIF.
 ELSE.
 retcode = sy-subrc.
 syst-msgid = 'ZVERROR'.
 syst-msgno = '000'.
 syst-msgty = 'E'.
 syst-msgv1 = NAST-KSCHL.
 syst-msgv1 = 'Sales Order cut letter
 for this order already issued'.
 syst-msgv2 = ' '.
 PERFORM protocol_update.
 ENDIF.
ELSE.
 CLEAR retcode.
 xscreen = us_screen.
 PERFORM processing USING us_screen.
 IF retcode NE 0.
 return_code = 1.
 ELSE.
 return_code = 0.
 ENDIF.
ENDIF.
endif.
ENDFORM.
 FORM PROCESSING *
FORM PROCESSING USING proc_screen.
CASE nast-kschl.
 WHEN c_kschl_order.
 PERFORM get_orders.
 CHECK retcode = 0.
 PERFORM openform USING proc_screen vbak-landtx.
 CHECK retcode = 0.
 PERFORM layout.
 CHECK retcode = 0.
 CHECK proc_screen NE 'X'.
 w_type = c_sale.
 PERFORM send_email USING proc_screen.
WHEN c_kschl_order1.
 PERFORM get_orders.
 CHECK retcode = 0.
 CHECK proc_screen NE 'X'.
 w_type = c_sale.
 PERFORM send_email USING proc_screen.
 WHEN OTHERS.
 retcode = 1.
 syst-msgid = 'E0'.
 syst-msgno = '430'.
 syst-msgty = 'E'.
 PERFORM protocol_update.
ENDCASE.
IF retcode EQ 0.
 syst-msgid = '69'.
 syst-msgno = '254'.
 syst-msgty = 'S'.
 syst-msgv1 = nast-kschl.
 PERFORM protocol_update.
ELSE.
 syst-msgid = 'CKCC'.
 syst-msgno = '036'.
 syst-msgty = 'E'.
 PERFORM protocol_update.
ENDIF.
ENDFORM.
 FORM PROTOCOL_UPDATE *
 The messages are collected for the processing protocol. *
FORM PROTOCOL_UPDATE.
IF xscreen EQ space.
 CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
 EXPORTING
 MSG_ARBGB = SYST-MSGID
 MSG_NR = SYST-MSGNO
 MSG_TY = SYST-MSGTY
 MSG_V1 = SYST-MSGV1
 MSG_V2 = SYST-MSGV2
 MSG_V3 = SYST-MSGV3
 MSG_V4 = SYST-MSGV4
 EXCEPTIONS
 OTHERS = 1.
 ELSE.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDFORM.
*& Form get_orders
 text
--> p1 text
<-- p2 text
FORM get_orders.
DATA : f_csr_found TYPE c.
SELECT SINGLE vbeln vkorg vdatu bstnk kunnr
 FROM vbak
 INTO (vbak-vbeln,vbak-vkorg,vbak-vdatu,vbak-bstnk,vbak-kunnr)
 WHERE vbeln EQ nast-objky.
IF sy-subrc NE 0.
 retcode = sy-subrc.
 syst-msgid = 'VN'.
 syst-msgno = '203'.
 syst-msgty = 'E'.
 syst-msgv1 = 'VBAK'.
 syst-msgv2 = sy-subrc.
 PERFORM protocol_update.
ENDIF.
SELECT vbeln posnr matnr pmatn arktx abgru kdmat werks
FROM vbap
INTO (vbap-vbeln,vbap-posnr,vbap-matnr,vbap-pmatn,
vbap-arktx,vbap-abgru,vbap-kdmat,vbap-werks)
WHERE vbeln = vbak-vbeln
AND abgru NE space "select items havng Rejection Reason
and PSTYV NE 'ZHDR'.
to check whether the reason for rejection was picked from the
managed codes tables
data: war_abgru type abgru,
 w_exist type c.
clear : war_abgru, w_exist.
select single abgru from ZMAT_REJ002
 into war_abgru
 where vkorg = vbak-vkorg
 and kunnr <> vbak-kunnr
 and MATNR = vbap-matnr
 and datef <= vbak-vdatu
 and datet >= vbak-vdatu.
 if sy-subrc <> 0.
 select single abgru from ZMAT_REJ003
 into war_abgru
 where vkorg = vbak-vkorg
 and kunnr <> vbak-kunnr
 and MATNR = vbap-matnr
 and datef <= vbak-vdatu
 and datet >= vbak-vdatu.
 if sy-subrc <> 0.
 select single abgru from ZMAT_REJ001
 into war_abgru
 where vkorg = vbak-vkorg
 and werks <> vbap-werks
 and matnr = vbap-matnr
 and datef <= vbak-vdatu
 and datet >= vbak-vdatu.
 if sy-subrc <> 0.
 select single abgru from ZMAT_REJ004
 into war_abgru
 where vkorg = vbak-vkorg
 and matnr = vbap-matnr
 and datef >= vbak-vdatu
 and datet <= vbak-vdatu.
 if sy-subrc <> 0.
 else.
 w_exist = 'X'.
 endif.
 else.
 w_exist = 'X'.
 endif.
 else.
 w_exist = 'X'.
 endif.
 else.
 w_exist = 'X'.
 endif.
if w_exist = 'X'.
end for check from managed codes table
*to find the quantity fields
 SELECT SINGLE wmeng bmeng
 FROM vbep
 INTO (vbep-wmeng,vbep-bmeng)
 WHERE vbeln EQ vbap-vbeln
 AND posnr EQ vbap-posnr.
*to get info about the customer
 SELECT SINGLE kunnr
 FROM vbpa
 INTO vbpa-kunnr
 WHERE vbeln EQ vbak-vbeln
 AND parvw EQ c_parvw_shipto.
 IF sy-subrc EQ 0.
 f_shipto_found = 'X'.
 SELECT SINGLE name1 spras
 FROM kna1
 INTO (kna1-name1,kna1-spras)
 WHERE kunnr EQ vbpa-kunnr.
 IF sy-subrc EQ 0.
 w_custname = kna1-name1.
 CLEAR kna1-name1.
 ENDIF.
 ENDIF.
 SELECT SINGLE kunnr
 FROM vbpa
 INTO vbpa-kunnr
 WHERE vbeln EQ vbak-vbeln
 AND parvw EQ c_parvw_csr.
 IF SY-SUBRC EQ 0.
 f_csr_found = 'X'.
 SELECT SINGLE kunnr name1 name2 adrnr
 FROM kna1
 INTO (kna1-kunnr,kna1-name1,kna1-name2,
 kna1-adrnr)
 WHERE kunnr EQ vbpa-kunnr.
 IF sy-subrc EQ 0.
 w_csrno = kna1-kunnr.
 w_csrname = kna1-name1.
 CLEAR kna1-name1.
 SELECT SINGLE tel_number tel_extens fax_number
 FROM adrc
 INTO (adrc-tel_number,adrc-tel_extens,
 adrc-fax_number)
 WHERE addrnumber EQ kna1-adrnr.
 CLEAR: adr6, w_email.
 SELECT SINGLE * FROM adr6 WHERE addrnumber = kna1-adrnr.
 IF sy-subrc = 0.
 w_email = adr6-smtp_addr.
 ENDIF.
 ENDIF.
 ENDIF.
*to get the date format in french
 IF kna1-spras NE c_eng.
 w_month = sy-datum+4(2).
 SELECT SINGLE ltx
 FROM t247
 INTO t247-ltx
 WHERE spras EQ kna1-spras
 AND mnr EQ w_month.
 CONCATENATE sy-datum+6(2)
 t247-ltx
 sy-datum+0(4)
 INTO w_ldate
 SEPARATED BY space.
 ELSE.
 CONCATENATE sy-datum+4(2)
 sy-datum+6(2)
 sy-datum+0(4)
 INTO w_ldate
 SEPARATED BY c_sep.
 ENDIF.
 w_total = vbep-wmeng - vbep-bmeng.
 IF w_total GT 0.
 PERFORM fill_orders.
 ELSE.
 IF vbap-abgru NE space.
 w_total = vbep-wmeng.
 PERFORM fill_orders.
 ENDIF.
 ENDIF.
 CLEAR vbap.
 endif. " check for w_exist for Managed Codes entry
ENDSELECT.
IF tbl_ord[] IS INITIAL.
 retcode = 1.
 syst-msgid = 'FZ'.
 syst-msgno = '027'.
 syst-msgty = 'E'.
 PERFORM protocol_update.
ENDIF.
IF f_csr_found IS INITIAL.
 syst-msgid = '8B'.
 syst-msgno = '127'.
 syst-msgty = 'W'.
 syst-msgv1 = c_parvw_csr.
 PERFORM protocol_update.
ENDIF.
IF f_shipto_found IS INITIAL.
 syst-msgid = '8B'.
 syst-msgno = '127'.
 syst-msgty = 'W'.
 syst-msgv1 = c_parvw_shipto.
 PERFORM protocol_update.
ENDIF.
ENDFORM. " get_orders
*& Form layout
 text
--> p1 text
<-- p2 text
FORM layout.
SORT tbl_ord BY bstnk kdmat.
LOOP AT tbl_ord.
 AT FIRST.
 PERFORM writeform_text.
 ENDAT.
 PERFORM writeform.
 AT LAST.
 PERFORM writeform_footer.
 ENDAT.
ENDLOOP.
CLEAR : cnt_1,cnt_2.
PERFORM closeform.
ENDFORM. " layout
*& Form openform
 text
FORM openform USING us_screen us_country.
DESCRIBE TABLE tbl_ord LINES w_lines.
IF w_lines EQ 0.
 retcode = '1'.
 syst-msgid = 'FE'.
 syst-msgno = '078'.
 syst-msgty = 'E'.
 PERFORM protocol_update.
ENDIF.
CHECK retcode EQ 0.
INCLUDE zrvadopfo.
ENDFORM. " openform
*& Form send_email
 text
 -->P_PROC_SCREEN text
FORM send_email USING PROC_SCREEN.
f_mail = 'X'.
PERFORM openform USING proc_screen vbak-landtx.
LOOP AT tbl_ord.
 AT FIRST.
 PERFORM writeform_text.
 ENDAT.
 PERFORM writeform.
 AT LAST.
 PERFORM writeform_footer.
 ENDAT.
ENDLOOP.
CLEAR cnt_2.
PERFORM closeform.
CALL FUNCTION 'CONVERT_OTF'
 EXPORTING
 format = 'PDF' "'ASCII'
 IMPORTING
 bin_filesize = st_doc_data-doc_size
 TABLES
 otf = tbl_otf
 lines = tbl_line
 EXCEPTIONS "DEVK912166
 err_max_linewidth = 1
 err_format = 2
 err_conv_not_possible = 3
 OTHERS = 4.
IF sy-subrc NE 0.
 retcode = sy-subrc.
 syst-msgid = 'OA'. "DEVK912166
 syst-msgno = '186'. "DEVK912166
 syst-msgty = 'E'. "DEVK912166
 PERFORM protocol_update.
ENDIF.
REFRESH tbl_objtxt.
CLEAR tbl_objtxt.
CLEAR tbl_proc_para.
REFRESH tbl_proc_para.
CLEAR tbl_maillist.
REFRESH tbl_maillist.
CLEAR tbl_pack_list.
REFRESH tbl_pack_list.
st_doc_data-obj_name = 'Sales Order Cut Letter'.
st_doc_data-obj_langu = 'E'. "DEVK905849
st_doc_data-sensitivty = 'F'. "DEVK905849
st_doc_data-obj_prio = 1. "DEVK905849
CONCATENATE w_type 'Cut Letter' INTO "#EC NOTEXT
 st_doc_data-obj_descr SEPARATED BY space.
DATA w_line(3) TYPE c.
PERFORM format_pdf. "DEVK905849
concatenate VBAK-VBELN '.PDF' into tbl_objhead.
tbl_objhead = 'Sales Order Cut Letter.PDF'.
APPEND tbl_objhead.
 "DEVK905849
CLEAR wrk_lines.
DESCRIBE TABLE tbl_attach LINES wrk_lines.
fields needed for email
tbl_maillist-com_type = 'INT'.
tbl_maillist-receiver = w_email.
tbl_maillist-rec_type = 'U'.
APPEND tbl_maillist.
send email
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
 STARTING NEW TASK 'MAIL'
 EXPORTING
 document_data = st_doc_data
 document_type = 'PDF'
 COMMIT_WORK = 'X' " added after ECC6.0 upgrade
 TABLES
 object_header = tbl_objhead
 object_content = tbl_objtxt
 receivers = tbl_maillist
 EXCEPTIONS "DEVK912166
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8
IF sy-subrc NE 0.
 retcode = sy-subrc.
 syst-msgid = 'ZA_G'. "DEVK912166
 syst-msgno = '922'. "DEVK912166
 syst-msgty = 'E'. "DEVK912166
 syst-msgv1 = sy-subrc. "DEVK912166
 syst-msgv2 = tbl_smtp-adsmtp-smtp_addr. "DEVK912166
 PERFORM protocol_update.
 syst-msgid = 'VW'.
 syst-msgno = '001'.
 syst-msgty = 'E'.
 syst-msgv1 = 'Print successful:email Recepient Invalid'."#EC NOTEXT
 PERFORM protocol_update.
ENDIF.
ENDFORM. " send_email
*& Form fill_orders
 text
--> p1 text
<-- p2 text
FORM fill_orders.
tbl_ord-bstnk = vbak-bstnk.
tbl_ord-kdmat = vbap-kdmat.
tbl_ord-xblnr = vbak-vbeln.
tbl_ord-ean11 = vbap-pmatn.
tbl_ord-arktx = vbap-arktx.
tbl_ord-csrno = w_csrno .
tbl_ord-csremail = w_email.
tbl_ord-spras = kna1-spras .
tbl_ord-csrphone = adrc-tel_number.
tbl_ord-csrfax = adrc-fax_number.
tbl_ord-csrext = adrc-tel_extens.
tbl_ord-total = w_total.
tbl_ord-custname = w_custname.
tbl_ord-csrname = w_csrname .
tbl_ord-ldate = w_ldate.
APPEND tbl_ord.
CLEAR tbl_ord.
CLEAR w_total.
CLEAR w_ldate.
ENDFORM. " fill_orders
*& Form writeform_text
 text
--> p1 text
<-- p2 text
FORM writeform_text.
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = 'WTEXT'
 window = 'WINDOW2'
 EXCEPTIONS
 element = 1
 window = 2.
IF sy-subrc NE 0.
 retcode = sy-subrc.
 syst-msgid = 'EBR'.
 syst-msgno = '056'.
 syst-msgty = 'E'.
 syst-msgv1 = 'WTEXT'.
 syst-msgv2 = 'WINDOW2'.
 PERFORM protocol_update.
ENDIF.
ENDFORM. " writeform_text
*& Form writeform
 text
--> p1 text
<-- p2 text
FORM writeform.
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = 'EMAIN'
 window = 'MAIN'
 EXCEPTIONS
 element = 1
 window = 2.
IF sy-subrc NE 0.
 retcode = sy-subrc.
 syst-msgid = 'EBR'.
 syst-msgno = '056'.
 syst-msgty = 'E'.
 syst-msgv1 = 'WTEXT'.
 syst-msgv2 = 'WINDOW2'.
 PERFORM protocol_update.
ENDIF.
ENDFORM. " writeform
*& Form writeform_footer
 text
--> p1 text
<-- p2 text
FORM writeform_footer.
IF nast-spras = 'N'.
 CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = 'FOOTER'
 window = 'MAIN'
 EXCEPTIONS
 element = 1
 window = 2.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = 'WFOOTER'
 window = 'WINDOW12'
 EXCEPTIONS
 element = 1
 window = 2.
IF sy-subrc NE 0.
 retcode = sy-subrc.
 syst-msgid = 'EBR'.
 syst-msgno = '056'.
 syst-msgty = 'E'.
 syst-msgv1 = 'WFOOTER'.
 syst-msgv2 = 'WINDOW12'.
 PERFORM protocol_update.
ENDIF.
ENDFORM. " writeform_footer
*& Form closeform
 text
--> p1 text
<-- p2 text
FORM closeform.
CALL FUNCTION 'CLOSE_FORM'
 TABLES
 otfdata = tbl_otf
 EXCEPTIONS
 unopened = 1
 bad_pageformat_for_print = 2
 OTHERS = 3.
IF sy-subrc NE 0.
 retcode = sy-subrc.
 syst-msgid = 'PS'.
 syst-msgno = '005'.
 syst-msgty = 'E'.
 PERFORM protocol_update.
ENDIF.
ENDFORM. " closeform
*& Form format_pdf
 text
--> p1 text
<-- p2 text
FORM format_pdf.
FIELD-SYMBOLS <fs>.
DESCRIBE TABLE tbl_line LINES hltlines.
DESCRIBE FIELD tbl_line LENGTH fle1 IN BYTE MODE . Defect#1579-
DESCRIBE FIELD tbl_objtxt LENGTH fle2 IN BYTE MODE . Defect#1579-
Start of Defect#1579+
DESCRIBE FIELD tbl_line LENGTH fle1 IN CHARACTER MODE.
DESCRIBE FIELD tbl_objtxt LENGTH fle2 IN CHARACTER MODE.
End of Defect#1579+
CLEAR tbl_objtxt.
REFRESH tbl_objtxt.
LOOP AT tbl_line.
 htabix = sy-tabix.
 MOVE tbl_line TO hfeld+off1.
 IF htabix = hltlines.
 fle1 = strlen( tbl_line ).
 ENDIF.
 off1 = off1 + fle1.
 IF off1 GE fle2.
 CLEAR tbl_objtxt.
 tbl_objtxt = hfeld(fle2).
 APPEND tbl_objtxt.
 SHIFT hfeld BY fle2 PLACES.
 off1 = off1 - fle2.
 ENDIF.
 IF htabix = hltlines.
 IF off1 GT 0.
 CLEAR tbl_objtxt.
 tbl_objtxt = hfeld(off1).
 APPEND tbl_objtxt.
 ENDIF.
 ENDIF.
ENDLOOP.
ENDFORM. " format_pdf
ANy Suggestion or help will be appreciated!
Regards,
Kittu
Edited by: Kittu on Jun 30, 2008 12:32 PM

Hello Julie Waller,
Very Good evening!
Thank you very much for your response!
Sometimes...I miss the basic things and start concentarcting on typical ways to fix the issue. ....which will only make my issue critical.
Hello Sathya,
Thank you for your response!
POints are rewarded..
Have a great day ahead!
Regards,
Kittu

Output type for Proforma Invoice for return delivery from delivery type RLN

Client require Output type Proforma Invoice for return delivery to vendor. As such return item category is not relevant for pricing so from delivery to proforma invoice can not have with p-ricing. I got quantity correct but pricing is coming Zero.
Client have ZPAC as packing list output type from delivery which shows quantity and pricing. So decided to use the same logic to pull pricing for proforma invoice from delivery.
Here delivery has standard output ZPAC as packing list with access sequence Z002 as Delivery Type.
I want to pop up output type for all return delivery so using access sequence with delivery type/vendor.
Vendor filed does not exist in delivery output type so brought that firld LIFNR.
It is assigned to procedure and maintained ZPRO output type for Proforma invoice. Asigned VV21 on front end.
Problem Still automatic output type ZPRO is not poping up. What type of access sequence will help me to pop up or what in configuration am I miising?
Appreciate help for solution at earliest.

Hi Padamsree,
I know Pricing & output very well. I need profomra invoice to be printed with quantity & value for return goods to the vendor. Pricing is associated with Item category RLLN for delivery type RLL which is return type delivery.
I need to have pricing in my Proforma invoice which is copied from delivery to billing document VTFL. Just check well how it is working in the system & if you know please answer so that it should be workable on the system. As theoretical answer may not be helpful. Appreciate for your time.
Thanks

Regarding Creation of Output types for SAP SCRIPTS

Hi All,
I want to create new output types for my SAP Script.
What is the procedure for creating new Z - Output Type.
Like ZA01 for Sales Order.
What is the procedure can any body help me in this regard.
It is not to use ZA01 in NACE & connect Print Program & Layout set against Form Entry.
It is for creation of ZA01 Output Type itself.
If anybody knows the procedure please post the steps.
Also please mention will there be any diffrence in creation from Module to Module (or) Transaction (Vs) Transaction. Just like Sales Order (Vs) Purchase Order (Vs) Production Order.
Thanks in advance.
Thanks & Regards,
Rayeez.

hi Shaik,
Steps for output type:
Go to NACE Transaction
Select V1 - Sales.
Click Output type
In edit mode , click on new entries.
Give output type as ZA01 with some descp.
Then enter , then u need to give the Access seq. as 0010
Rest proprties are more and less similar to the BA00 standard output type in V1 only.
After that u need to give the processing routines.
In that u need to give the Program name
followed by Form routine name
In this way u can create the output from NACE tran.
Let me know if u want anything else.
Cheers
Rewrd points, if found helpful

Need to configure output type for adobe form

Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
Chandra

Hi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it.

List of script and smart forms(except TNAPR) with output type or print prog

How to find out List of SAP SCRIPT and SMART FORMS (except TNAPR)with output type or print program..I like to chk in output type WMTA whch form should use.kindly help on this

Hi
WMTA is special msg and doesn't create any print: so you can't find a sapscript or smartform to link to it.
WMTA is a message for delivery, so you can find it by NACE trx or TNAPR table (It's the same): infact here it can find only all messages of logistic modules (SD & MM).
The routine ENTRY of RLAUTA20 is called by WMTA and creates a Transfer Order (for WM, Warehouse Management, module), so if you need to create a print for that msg you need to change prg RLAUTA20,
Max

New Output type for purchase return excise invoice..?

Hi all
For purchase return process with exisable material.
Here I m using the transaction
1.J1IS to create purchase return excise invoice and
2.J1IV for posting to accounts & print purchase return excise invoice
.In standard SAP the output for purchase return excise invoice is JEXC.
here my query is started,
ABAPer created the new program for purchase return output with all new layouts,
And from functional side i have defined new output type for the same as YEXC copying from JEXC.
While doing the transaction J1IV, i getting the output type YEXC, i m not able to print preview.
To proceed further i need some body guidence. Like where to assign the output type.
some body can give some inputs .
Thanks
sap-mm

Hi AP thanks for ur immediate response.
But i have done all the configuratuion in NACE only.
There in nace i m not able find out the mistake or missing configuration.
Can u expalin me step by step process end to end .
Thanks
sap-mm

Program name if no output type for dunning smartform

Hello Experts,
I want to know if smart form is not associated with any output type then how can I know which program is calling the smartform. I checked out in TNAPR with the smartform parameter value and system did not returns any hits. It means smartform is not associated with any output message type.
I am working with a dunning smart form where I need to make some changes, Transaction F150 displays the form print preview(One can also print from the transaction), But I have no idea which program is actually calling the smartform.
Secondly I made some changes in the text element but when through F150 I again viewed the form display, some thing I deleted from the text element still appearing in the preint preview. Could anyone throw some light on this and guide me.
secondly how to put breakpoint in the smartform, Normally in abap report you just press ctrl+shift and f12 but in breakpoint it is not applied.
Thanks,
Mark

FI Forms will not save under TNAPR table
FI Form names and Program Try to use below tables :
Tables : T001F or TTXFP
There is no output types for FI Forms,
Check the below link :
http://help.sap.com/saphelp_erp2004/helpdata/en/15/8c2239c2af4a04e10000000a11405a/frameset.htm
Path for see form name and print program - Dunning
path for configuration is :
SPRO
FInancial Accounting->Contract Accounts Receivable and Payable->Business Transactions->Dunning Notices.
Just goto SMARTFORMS Transaction -> use smartform name -> execute smartform -> it will go SE37 -> click on display -> here you can set up break point.
or you can use print program to setup debugging.
Now run F150 Transaction -> here you are able to see debugging mode
Thanks
Seshu

Output type to print pending schedule lines only

Hi,
Is there a standard Output type to print only pending schedule lines thru ME9E, with the respective delivery date, schedule Qty, delivered Qty and pending Qty,
Please revert.
Thanks & Regds,
Ritesh

Check this link:
output type is used for sending / printing "schedule lines" against sch agr
Re: Email output of PO
Edited by: Afshad Irani on Aug 30, 2010 12:26 PM

Want to change output type for 10000 sales orders through MASS

Hi Friends,
I would like to change the Output type in the sales order for 10000 sales orders.
Can I do with MASS transaction. If so, Plz let me know how ?
Is there any other process to change the output type for 10000 sales orders, as its difficult to manually in each and every sales order.
Its very urgent issue, Plz let me know at the earliest.
Thanks & Regards,
Praveen Kumar. A

This may be little tough for 10000 sales orders.
1. You have to remove the output record for the irrelevant output record using tcode VV12 for the relevant document type. So now for the document type, the old output wont be triggered.
2. Now, create output records for hte correct output type in VV11 tcode(for the output type BA03) for the document type. Now this output will be triggered for all the document types you are creating from now onwards.
3. To trigger the output type BA03, in all the old orders, you just have to open these sales orders in change mode (VA02), and just save it. When u open it the output type BA03 will be automatically triggered as the master data is maintained in VV11. But because just opening all the 10000 sales orders in VA02 one by one be a mechanical task, you have to think of some tool for this.
May be a CATT procedure can do the trick. Else, you can just create a small program, where you can upload these sales orders and the program will just open these orders in change mode and just saves it (without making any changes). Then the output will be retriggered.
Here again, if you are printing the output directly, it is advisable to trigger the output in batch mode(Date/Time field is 1 in VV11), and then you can again trigger the printing again using the program RSNAST00 after office hours for these 10k orders.
I hope I answered ur query.
Pls lemme know if you need some more info. (You can reward me too...)

Output type for transfer order (LT31)

Hi Friends,
could you please give me a hand with this. I would like to know what is the output type for transfer order (T code LT31). Wher can i find this? I looked for in "NACE" but i did't find.
Thank you for help.
Kasia.

Hi Kasia, For TO :
- driver program 'RVADOR01'
- application 'V1'
- output type 'KO00'
check Re: Transfer order print LT31 for details

Print Payment Voucher

Hi Experts,
My users want to print payment voucher for payment method Cheque and TT.
What configuration should i do. What's the Tcode to print the payment voucher.
Note: They do not use automatic payment program
Thanks,
Rashmi

Hi rashmiravi,
Payment voucher requires a print out which means you need
to develop New Forms with the help of your abaper.
You can use SAP standard Tcode - F-58 / FBZ5 which will call the New form based on the configuration in
OBVU -> Form Data -> SAP Script.
Other alternative which is not a right choice is go for a custom program with complete
ABAP work inside with your specific logics.
Hope this helps
regards
pbb

Output type for printing payment voucher

Similar Messages

Maybe you are looking for