Output type not coming automatically

HI
Whenever i am creating using t.code mb11 t.code i have to give output type wa03 manually,is this possible automaticaly output type generation in mb11 t.code
Below settings also i completed
NACE-Select ME Click on Condition records- Select WA03-Trans/Event Type-"WA" Print Version " 2" and Execute it
In the next scren P-1, madium-1, Language EN and enter,, Now select the line and click on the communication method LP01 and save it,,
Regards
sam

Hi
Bijay and nisha thanks for reply still not come my output type automaticaly,i have completed my configuration in omj3 t.code for my plant and storage location.nacz t.code i give 173 GR/GI requirement,
Regards
sam

Similar Messages

Output message not coming automatically for PO

hi
i cerated new output message sending PO to vendor by e-mail. I maintained condition records in MN04. Condition table, access sequence all are maintained. I included new output type into the control data of the existing schema RMBEF1 and the schema is assigned to PO also. Also maintain entry in following string SPRO- Material Management-Purchasing-Messages-Output control-Message Types-Define Message type for PO---Fine-Tuned Control: Purchase Order
Still the output message is not coming automatically while creating PO every time i add output type namually. please guide
regards

Hope you have maintained condition for combination. preferrably -
1) Purch Doc type > PORG > Vendor
2) Please make sure that, you have maintained the fileds which are relavant for output.(if you are making any changes in existing PO and you need output)
Hope this will help you

Output type not trigerring Automatically for inbound delivery

Hi all
We have created a custom output type for Delivery idoc processing ZPOD copy of OPOD and maintained all the settings also condition record for the same has been maintained.
But when we are creating inbound delivery the output type ZPOD is not coming automatically.
In the Delivery document and in the Output screen i have checked Determine analysis for output(VL32N -> Enter IBD No -> Select menu option Extras -> Delivery output -> Header
Go to menu option GoTo -> Determin.Analysis.)
It is showing me ->Message 502-Output ignored (requirement 017 not fulfilled)
Can u please throw some light so that in output message determination the Output type should come automatically for Proof of delivery
Thanks and regards
shailesh

Um... I think the message is pretty clear on this - the reason is "requirement 017 not fulfilled".
Requirements for output control may be found in VOFM transaction, under Requirements -> Output control. 017 is the standard one, the description says 'POD on goods issue'. According to the comments, the output is not issued if "POD status is initial" or "No output, if no goods receipt".
Either correct the document or remove this requirement in output configuration, if it's not applicable.

Output type not showing automatically

Hi All,
I'm creating IDocs thru Message control for Purchase Order ME21N. When I create a PO, after filling all the heade and item details on the screen of ME21N for a particular vendor, I go to 'Messages' tab but can't find the output, medium, partner etc on that screen. I manually enter the details here and IDoc is created.
Earlier, this ouput detail was populating automatically but now It's not coming. I checked all settings in NACE, WE20 etc for that particular vendor but I couldn't find any clue.
Please help me. It's very urgent.

Hi,
Just check whether earlier condition records were maintained for the PO output type which you are using.
Condition records missing situation can create such problem.
Thanks.
Mark points if helpful

Output types not defaulted automatically

Hi experts,
I have problems on two areas:
1. Upon creation of Sales order, the output type was not defaulted automatically for picking list.
2. In Outbound delivery after PGI, it does not default output type for Delivery
My settings are:-
In config. - VP01 Define print parameters in Sales (for selected output types)
In master data - VV11, VV21 and VV31 all setup by output type and key combination Sales Organization/Order Type.
Any clue where I have gone wrong or missed out?
Regards
PSK

Hi there,
For those output types check what are the default values --> dispach time. It should be "send immediately which saving the application". Only tehn the O/p will trigger immediately. Else you will have to rpocess RSNAST00 prog.
Also check if the condition records are maintainted properly & printers are asigned in condition record --> communications.
Regards,
Sivanand

Delivery Output Type not updated automatically in change mode

Hello,
I am dealing with a strange problem.
If i open delivery to change using VL02N then, output type configured for reissue is updated properly and on save ouput type is getting successfully processed also.
Now if i open VL03N and then using change mode button on application toolbar i go to change of delivery, then output type is not getting created. The issue was figured out when i tried to open delivery from shipment and then using change button i tried to change and save delivery....
Expectiing solution from experts.
Thanks
Hari

Hi,
May be this behaviour is due to the application in which you are opening the delivery. When you open the delivery from shipment, check the transaction code in the screen in system status. If it is VL03N, then it is correct. But if it is VT03N, then it is expected that even in change mode, the output is not triggered. Pls check this once.
I tried the same thing in an invoice from where i opened a SO and then went in change mode, and the otuput is getting retriggered.
I hope teh configuration of your output is correct. Ensure that the Multiple Issuing button is ticked on, if you want yoru output type is to be triggered everytime you go in change mode.

Condition type is not coming automatically

Hi,
There is a condition type JECS (A/R Education Cess) and access sequence is MWST, in normal order it is coming automatically but in other order type (Subsequence delivery free of charge - SD) I have to put it manually that means it is not coming automatically.
Please guide me how I can resolve this issue
Regards
Yogesh

I dont know what exactly you want. You want the condition type JECS to flow automatically or manually for Subsequent Delivery Free of Charge ??
If you want to flow automatically, then, assuming that you have a different pricing procedure for Free of Charge Delivery, check in your pricing procedure for this where against the condition type JECS, the box "Manual" would have been ticked. You have to change it to Mandatory
thanks
G. Lakshmipathi

Output type not automatically determined (no output device specified)

the output device is already specified for this output
we dont want to manually add the output on all the invoices where the output was not automatically determined before... what should we do?
is there a way not to manually add them?
thanks in advance
Pablito

Hi
You really dont need to add the output in all these documents.
You have to maintain the masterdata for output records in VV31.
Now just open all the invoice documents one by one in Change mode through transaction code VF02 and just save it
Whenever a document is opened in change mode, the output gets automatically triggered. Hence the output type will be automatically populated in the output screen. Once you save the document, the output gets successfully executed, and you will get the desired document
Reward if this helps you

ALV output is not Coming

Hi Friend ,
I ve a problem with the ALV output. Actually i am getting all the value in the internal table and then i am binding the table with the node . But i wonder why the output is not coming in the ALV table only the blank table is coming .
Regards,
Satya

Hi
first u instantiate the alv component with the use of wizard.
then u call the method "GET_MODEL".
Then u call the method "SET_DATA" and set the alv table with the node in which u have ur data.
check this code.....
DATA lo_cmp_usage                 TYPE REF TO if_wd_component_usage.
DATA lo_interfacecontroller       TYPE REF TO iwci_salv_wd_table .
*declaration of alv usage
*declare config model
DATA lo_config_model_value        TYPE REF TO cl_salv_wd_config_table.
lo_cmp_usage =   wd_this->wd_cpuse_alv_requi_list( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
    lo_cmp_usage->create_component( ).
ENDIF.
lo_interfacecontroller =   wd_this->wd_cpifc_alv_requi_list( ).
lo_config_model_value = lo_interfacecontroller->get_model( ).
lo_interfacecontroller->set_data(
      r_node_data =      lo_nd_req_list
here lo_nd_req_list is the name of my node.
Regards
chythanya

The prices are not coming automatically

Hi gurus,
In batch determination. When i am creating a sales order the batch number is coming automatically. But the thing is the prices are not coming automatically. what could be the reason. Even though i maintained the prices conditon records in vch1 but the system not picking up automatically. Please give the solution. It is urgent
Thanks & Regards
cheers

Hi,
Batch valuation is possible with the std functionality.
It will allow to valuate each batch saperately.
More information,
http://help.sap.com/saphelp_46c/helpdata/en/61/969838e914a20de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/25/2839124f7811d18a150000e816ae6e/frameset.htm
Valuation for a Single Batch
Use
You use valuation for a single batch if you want to separate costs for externally processed batches from costs for internally processed batches, and if you want to keep the price and value of each individual batch in inventory management on a value basis.
Integration
Valuation for a single batch is carried out using separate values, just as partial stocks for a material are distinguished according to origin, for example. In valuation for a single batch, a separate characteristic category is created for each batch (batch number = characteristic category).
Valuation for a single batch is a special kind of valuation type for batches.
Prerequisites :To work with valuation for a single batch, you must choose valuation for a single batch (indicator X in the standard system) as substance characteristic type in the material master record.
regards,
Siddharth.

SLED date not coming automatically

hi,
As per my client requirement they will enter the production date only in goods receipt and SLED date have to come automatically at GR time. I already maintain the Total shelf life and minimum remaining shelf life in material master.i activated SLED for plant and movement type but SLED date not coming automatically.
If i l enter SLED date more than my Total shelf life period , then system automatically updating the total shelf life period in batch master record. how to avoid this issue? i want whatever shelf life entered in GR should have to recorded not system calculated based on master data(Total-shelf life)
Thanks
Muthuraman.D

Dear all,
i am using internal batch numbers at the time of goods receipt provide me some solution for above issue?.....
Thanks
Muthuraman.D
Edited by: muthuraman d on Nov 7, 2011 12:18 AM

Output type should come Automatically in the material document

Hi All,
How the output type will come automatically in the material document after doing some material movement through MB1C.
Regards
Bapu

Hi Bapu
Are u asking how it is coming or you want the output to come for MB1C.
Please check Tcode OMBR there select print version, and you can see for Tcode MB1C settings should be there.(i.e. print version must be maintained there).
regards
Yogesh

Output Type not automatically determined at invoice creation

Hi Friends,
I am facing a problem that while i am generating the invoice for a particular billing document type, the output type is not automatically being determined. Instead, I have to go into the invoice in change mode (VF02) Header>Output and assign the output type to it and select the local printer and save in order to print the invoice.
I am generating the invoice for this Invoice Type/Output type for the first time.
Please suggest the possible causes.
Regards,
Pankaj

Hello Pankaj,
Suppose you are using output type RD00 for invoice print out. You have maintained the condition record for RD00 in transaction code VV31. The most important thing here is the assignment of the printer.
Suppose for output type RD00 you are maintaining the condition record for key combination - Sales Organization + Distribution Channel + Division.
At the header level you will see the Sales Organization & Distribution Channel & at the item level you will see the Division.
Sales Organization = BP01
Distribution Channel = 01
Division.............Name..........Funct.........Partner............Medium......Disp. Time.....Langu
01............... Std Division..........BP............--......................1......................3................---
Select the line item & click on Communication. Here assign the output type which you will use for the print out. Now Save the condition record.
After doing this try running one sales cycle - sales order - delivery - invoice. Save the invoice & now check in the change mode (transaction code VF02) the system will determine the output type RD00 automatically.
Note:
1. In the create mode the system will not display the output type RD00, after you have saved the invoice the output type will be determined automatically.
2. Also check if there is any requirement assigned for the key combination in the access sequence (IMG - Sales and Distribution - Basic Functions - Output Control - Output Determination - Output Determination Using the Condition Technique - Maintain Output Determination for Billing Documents - Maintain Access Sequences)
With best regards,
Allabaqsh.
(Idhasoft Ltd.)

Output type not automatically triggered in billing

Dear all,
Output type is not automatically triggered while creating billing,every billing need to maintain it
manually but output type is already maintained for all customers in VV31.
How to solve this issue or any configuration setting need to be done ?
Jeyakanthan

Hi
Kindly check the belwo path
Sales and Distribution
     Basic Functions
         Output Control
          Maintain Output Determination for Billing Documents
            Maintain Output Determination Procedure
in the billing out put procedure check against the billing out oput condition type any tick is maintained in the manual only
Regards
Damu

Output type not automatically triggered on invoice creation

Hi,
I want to set three output types ZCUM, ZCUR and ZPCC upon invoice creation.
I have configured it correctly. For Output types ZCUM and ZCUR i have maintained condition record in key combination "Billing Type" and for ZPCC condition record is maintained in " Sales Org /Cust. Grp. 5/Ord. reason / Bill. Type" that's the difference.
In NACZ procedure is Z10000 with requirement is 902 for all three.
Output types ZCUM and ZCUR defaulting upon initial creation. But ZPCC is not defaulting.
Can you please suggest me the solution ...
Thank You,
Archana

Hi,
As suggested by Brad, check the Output Determination analysis in Billing document .
Menu option -> Go to -> Output
Select the output type -> Select menu option Go to -> Determin. Analysis
Expand the Output type determination details of ZPCC by expnading the node in analysis.
Check whether Green button is displayed against the access sequence mentioned by you.
Regards
Vinod

Output type not coming automatically

Similar Messages

Maybe you are looking for