Output type not determined in Sales Order

Hello Friends,
I am facing a problem.
I have maintained the O/P condition record for O/P type for order confirmation.
While creating sales order, in the determination analysis for O/P , it shows as O/P found, but the same is not added in the sales Order outputs.
Can somebody advise me what is missing ?
Regards

Harsh Mathur ,
1. You need to maintain Condition records in VV11 for BA00 (Key combination - order type)
2. If already created Check whether the records are existing through VV12
3. If yes, then enter into your sales order in VA02 Mode
4. Check Extras --> Output --> Header --> Edit
If status is yellow or green then it is ok. Output = BA00, Medium = Print output, Function = SP
Then Choose the line and click "Communication Method" Enter Logical destination - LP01 and activate the indicator against "Print Immediately"
Click Back button --> Click "Further Data"
Under "Requested Processing" header
Dispatch time = Choose the option accordingly
save it.
Then counter check the config by running sales transaction without saving check
Check Extras --> Output --> Header --> Print Preview
if the output is shown then you have succeded
Regards
Sathya

Similar Messages

Condition type not determine in sales order

I have condition record maintained for the condition type as per the order reason. When I create the sales order system is not reading the condition record so no condition type is getting determined. Pricing date from the sales order is within the validity period of condition record.Parmeters are also matching but still in the sales order condition type is not getting determine.
Thanx
PNU

In that case, do update of pricing.
To do that, Sales Order - Item data - Condition Tab - Click Update button and choose option B - Carry out new pricing.
To know who manually remove this.
Choose Enviroment from menu bar in sales order - choose Change for display of change in the doc.
Regards
JP

How can i find differnet output types for a given sales order ?

hi all,
answer my question please........?
how can i find differnet output types for a given sales order ?

hi
check in NACO transaction if you have assigned access sequence to your output ytpes and if you have ticked checkbox "Access to output conditions" - otherwise it will not even try to access condition records.
From help :
Access to output conditions
Indicates whether the system determines the output by searching for valid
condition records.
Procedure
If you want the system to search condition records for the appropriate
output, mark the field.
Note
If you leave the field blank and if you are processing sales, shipping,
or billing documents, the system automatically determines output from
information stored in the customer master record.
regards
ravish
<b>plz reward points if helpful</b>

Partner determination functions are not determine in sales order

Dear Sap Gurus,
I have made a new partner function (P2) and have been configure it in partner determination procedure, although i hv made new customer master for the same account group. All th partner function are showing in the customer master data but these are not determine in sales order, one error is coming...this partner procedure is not defined.......kindly give me advide how to resolve this problem.
Regards
Parul Deshwal

Hi
Have you assigned the Partner determination procedure to your sales document type?
Also have you assigned the Partner function to your Partner determination procedure.
Also do the same to the sales order item partner determination
regards
Prashanth

Condition type not coming in sales order

Hi,
we have a condition type Z026. The issue is that it is not set in the order but the condition records exists. The pricing analysis shows that condition reocrd is missing but the fact is the condition record is there. The acess seq is Z026 and there are many tables in the acess sequence.
The first table in the access seq is 906 and the condition record exists but still the system says that the condition record is not found using cond preliminary step (header fields like customer/sales org/div). the cond record is maintained for relevant sales org/dist channel/customer/material. cond preliminary step means that system first looks for the header fields but everything is there.
The condition is active and the conditon is created on 21.7.10 with validitity from 21.7.10 to 31.1.2010 and the pricing date in sales order is 27.7.10. so everyhting is fine but yet the condition is not coming in sales order
what could be the issue.
regds

Hi,
Now try creating a sales order with 20.07.2010 as the pricing date. It will work. Create another order with 21.07.2010 and it will not work. If so, it is due to the validity date. When you give 21.07.2010 as validity date and there is already another record which was valid on that date, the gap of one day can happen and we have experienced this. There is even an OSS note explaining this concept, which makes sense business-wise.
However you check the scenarios I have mentioned. If the behaviour is as I have mentioned, then you have to change the pricing date of your problamatic sales order to one day earlier, or move the validity date one day earlier.
If the behaviour is different, pls lemme know

Output type not determined during background Job

Hi Experts,
we have scheduled a Job to create Billing. In few of the billing documents, output type is not getting determined. Condition records are maintained correctly. This is happening only for few billing documents in spite of maintaining condition records?
Can some one help me on this issue.

shravan,
added: How do users come to know that in few documents output is not getting determined?
To check determination of output record - In VF02, give the billing document for which output was not determined.
Goto > Header > Output, check if the output has got determined.
If not then it is not getting determined.
any difference between the documents in which output is getting determined and in which not?
TW
Message was edited by: TW Typewriter

Urgent:pricing condition not determined in sales order

HI,
i have defined a pricing condition for a material . when i am creating a sales order the pricing condition is not determined;

hi
You must have done all the pricing related settings like access sequence, determination, condition type. Please cross check them once again. Also see if the condition record is picked up properly , is it bypassing ?
If every thing is fine, check the item category of that material and see if in business data of that item category Pricing is activated !!
regards
swapnil

WMTA output type not determining in outbound delivery

Hi,
Im in is-retail we are using lean WM for automatic transfer order creation, recently we made immediate delivery also, after this auto TO is not creating and WMTA output type also not determining in delivery.
pls help me any body why out put type is not determining and what is the solution?
Regards,
MMReddy.

There could be several reasons. Go to the document and in the extras-output check output determination analysis in the processing log.
If the output has been created successfully then you need to see your printer determination. Ask basis to check it up. If the problem is that even the print preview is not coming. Check your communication in the output analysis and ensure LOCL is selected. Any other printer will need to be configured.
If thats done already then check whether you have maintianed the condition record.
If that too is done then check whether your output type has been assigned to the output procedure and that the output type is listed in the procedure.
regds
Jude

Requirement Type not populated in Sale Order

Hi,
In our sales order a requirment type 041 is not getting populated into the sales order for one particular item category.
Regards,
Jagan

Requirement type determination in standard SAP is performed using a six-level hierarchical
sequence:
1. First, SAP tries to determine the requirement type using the strategy group from
the material master record.
2. If the strategy group is not maintained, SAP determines the requirement type
using the MRP group from the material master record.
3. If this is not maintained either, the SAP system determines the requirement type
using the material type from the material master record.
4. If this also fails, the SAP system determines the requirement type using a combination
of the item category and MRP type.
5. If this rule is not maintained, the SAP system at last tries to determine the
requirement type using the item category itself.
6. If no requirement type is found at this level, the system treats the transaction
as not relevant for the transfer of requirements or availability check.
Regards
Deb

Free goods should not determine in sales order

Hi,
I have maintained the free goods determination in SAP CRM with validity period in T Code: /sapcnd/gcm and have created a quotation for the material which has a free goods validity.The free goods are determined at quotation level, when i was converting the quotation to the sales order the free goods validity period got expaired.In this case the free goods are should not get determined in the sales order.But when i test it in IDES system the free goods are getting determined in the sales order eventhough free goods validity period expaired.
Can any one tell me how to restict the free goods in the sales order level when the validity period expaired at the time of sales order create.
Regards
Nagaraju

Hi ,
You can use the BADI CRM_COPY_BADI. Here you can implement the check for products which are free and have expired to be excluded from copying from quotation to sales order.
Regards
Kavindra

Free goods Not determine in Sales order(VA01)

Hello Gurus,
As Iam Creating Sales Order(VA01). In the back end I have done each and every configuration regarding free good determination then also the system is not determine the free goods
Apart from that Iam going through Exclusive free goods.
So please give me the Solution where Iam missing.
Regards,
Sukdev.

Hello Gurus,
As Iam Creating Sales Order(VA01). In the back end I have done each and every configuration regarding free good determination then also the system is not determine the free goods
Apart from that Iam going through Exclusive free goods.
So please give me the Solution where Iam missing.
Regards,
Sukdev.

Condition type not appearing in Sales order

Hi All,
Iam using TAXINN, Copied ZINFAC to KINFAC,
I have created JIVP and JIVC for VAT and CST,
I have maintained Condition Records for JIVP and JIVC.
Both these condition records are not reflecting in my sales order, i.e. the records are not coming.
Please help me in this regard
Siva Narayana.B

hi,
please check if the condition records are mentioned for the key combination matching the sales order. ie if the condition records are maintained for the required combinations. Then check if the correct tax codes are maintained in the condition record and properly determined at FTXP.
Thanks
Sadhu Kishore

Discount condition type not appearing in sales order but in invoice

Hi,
I have two discount condition types (MPDI,ZSDI) in my pricing procedure,at the time of sales order creation one discount condition is not appearing.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
In the billing ,i could see the condition type appearing.I have checked this,but i could not understand why it is happening.Even the condition catergory of condition is empty not L.
Also please find the screen shots below,
Pradeep

Pradeep,
Am sure user might have deleted the condition type in sales order, the same condition type woudl have entered manually in invoice.
Please check my testing, i have done the same entered ZA09 manually and after saving have deleted again in sales order, after dilivery and when i created invoice here i have entered manually the same condition type.
So in your case also the same thing could have happend, check the change log and also in invoce condtion tab check the condtion type in analysis ( Invoice analysis not order). so that you can udnerstand whether it was entered manully or not.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
This is because in the condtion tyoe the abvoe key combiantion was found with records hence the below key combition was ignored. this you observe in your screen shot with with 5.00
So my guess is the condtion records was deleted in sales order.
thanks,
srinu.

EDI1 Condition type not determined automaitcally in ORDERS process

Hi Experts,
We are in the process of creating the Sales order by receiving EDI data from customer and converting in to IDOC format and trying to create the sales order. While executing the ORDERS IDOC message type sales order is getting created successfully. But Condition type EDI1 is not getting activated even after maintaining the value in E1EDP01-VPREI.
During foreground mode, if we maintain the EDI1 condition type manually then, its accepting without any issue. But during IDOC process its not getting added automatically.
Please give your suggestion on this.
Warm Regards,
Nag

Problem with the IDOC FM. We identified and rectified the issue. Thank u

Output type not triggered during Delivery Order - pls help

Hi,
Need some help.
I'm trying to setup output determination for delivery. It's a new output type for delivery.
There are some checking that I want to build in to determine whether the output type is to be generated. Therefore I have to make sure of requirement (routine). However, after putting in the configuration, coding the requirement and creating the condition record, the output type still cannot be generated. When I go to VL02N to check the Output Determination Analysis it says the requirement " " is not fulfilled. It's not even calling out the requirement number that I assigned in the access sequence.
Any idea what could be wrong?
This is what I've done :
1. Creating condition tables
2. Creating access sequence & assigning the condition tables to the access sequence
3. In the access sequence, assign requirement number 999. The "Exclusive" indicator is not ticked.
4. Ensure that the requirement 999 is activated in tcode VOFM.
5. Create output type, assign the access sequence to the condition type.
6. Assign the condition type to the output determination procedure. Make sure the "Manual" checkbox is not ticked.
7. Assign the delivery type to the output determination procedure.
8. Create condition record.
Note : when i created the condition record, I am not able to assign a Partner Function (for eg. SH) to the record. However in the config for the output type I've already configured for that Partner Function "SH" to be allowed for that output type.
Appreciate suggestions & feedback.
Thanks
Rgds,
L

Hi,
When I go to VL02N to check the Output Determination Analysis it says the requirement " " is not fulfilled. It's not even calling out the requirement number that I assigned in the access sequence.
This is because in requirement you put certain conditions should be fulfill then out put should trigered,
Example - if you maintained condition in requirement that user must maintain loading point
Now when creating delivery user not maintained loading point then output will not trigered, so user must maintain that then only it will trigered output.
Same problem just now solved, check which data maintenance conditions in routine and try to maintain that.
Kapil

Output type not determined in Sales Order

Similar Messages

Maybe you are looking for