Output type not RED even after exception
We have created an output type ZXXX. This output type is configured to email contract externally. If in the print program there is error getting email address, I am throwing an exception. I am getting the exception but the outout type shows GREEN in document. When I see the processing log in detail the last item in the list is the exception in RED which I triggered thru print program. Why is the output type still GREEN then? How can i make it RED? How can I bring red at the top?
Thanks,
Raj
If there is an error getting email id I passing the MSGID, msgno, MSGTYP = "E', MSGV1, MSGV2, MSGV3, MSGV4 to subroutine PROTOCOL_UPDATE. I can see the message in processing log of the output type. But before clicking on the processing log if you see the output type it has GREEN light. But in fact it is red. How can I make the light red, when you see the output type before clicking on the processing log.
THanks,
Raj
Similar Messages
-
Transaction type not delivered even after generating receipt
HI Gurus,
I have a requirement wherein I am creating 2 POs. In 1st PO my Ship-To-location is 'LOC1' and for the second is 'LOC2'. Now after the PO is approved and when I generate receipt in purchasing
for loc1 after the receipt gets generated in the receiving transaction summary form there is no entry for transaction type 'Deliver', but for LOC2 there is a transaction deliver.
Now I am not able to understand as to why the items are not getting delivered?
How can we see what items are getting delivered or not both using tables and front end?
And how can we resolve this issue?
I am using r12
Thanks in advanceHi,
1 . What is the Match Approval Level (2/3/4 way ? ) and Invoice Match Option for both the PO line ?
check the PO shipment for that.
2. What is the Receipt Routing for both the line ?
check Receiving Controls option at PO shipment level.
3. Check the Transaction Status Summary for error. -
Skype 6.18 crash even after exception provided for EAF
Hi Support,
We have deployed EMET 5 to our 50 users. We observed that some Windows 7 x64 and Windows 8.1 x64 are facing issues with Skype. We observed that EMET is causing exe to stop. Uninstalling EMET resolve the problem and EMET 4.1 update 1 works fine with Skype
6.18.32.106 version. Our group policy already specify EAF, EAF+ protection are disabled for Skype.
It does not work even after downgrading Skype to any lower version. Can you please suggest best way to resolve the problem?
1. Upgrade EMET 5 from version 4.1 update 1
2. Upgrade Skype from version 6.14 to 6.18
3. Quit Skype and Restart applicationSkype throw below error in event viewer
Faulting application name: Skype.exe, version: 6.18.60.106, time stamp: 0x53d154b0
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0xe06d7363
Fault offset: 0x0000c42d
Faulting process id: 0x31ec
Faulting application start time: 0x01cfb0a510194fc2
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 4ea3c722-1c98-11e4-9ab4-f8b156c39b2b
EMET error:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Skype.exe
P2: 6.18.60.106
P3: 53d154b0
P4: KERNELBASE.dll
P5: 6.1.7601.18409
P6: 53159a86
P7: 000006a6
P8: 0000c42d
P9:
P10:
Attached files:
These files may be available here:
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Skype.exe_7e29ea3d4cc8a8552ac2bf4a961b6348a4ac310_314b936e
Analysis symbol:
Rechecking for solution: 0
Report Id: 0a6699c2-1c98-11e4-9ab4-f8b156c39b2b
Report Status: 0
EMET detected DEP mitigation and will close the application: Skype.exe
DEP check failed:
Application : C:\Program Files (x86)\Skype\Phone\Skype.exe
User Name :
Session ID : 1
PID : 0x2FC8 (12232)
TID : 0x2560 (9568)
Module : N/A
Mod Base : 0x00000000
Mod Address : 0x00FAAD78
Mem Address : 0x00FAAD78 -
Permissions will not set, even after using terminal commands?
Hey,
I found a thread on here for using the terminal to type in commands for the user permissions and for the PSIX permissions on Leopard (10.5) server. These commands are supposed to clean the server of all underlying(hidden) permissions that you cant see and then you are supposed to be able to then set the permissions again and finally, to hit "Propagate Permissions" so that all the permissions set for the shared volume then get farmed out to all sub files/folders. This did not work when I tried it in the terminal, it said "Command not found" even after I typed in the admin password. Is there anyone out there who can tell me the actual way to fix the old permissions and get new ones set?
The story is: We had an old server on a G4 when i first took control of the server, I took the shared hard drive out of the G4 and inserted it into a G5 and started using it with the leopard server. the permissions did not really need to be set on that volume because they had carried over from the last time they were shared. But we recently just got a Drobo unit for our server and I recently transferred all the shared files and folders over to the new volume, but ever since I cant get the permissions to farm out to all the stations, it shows me that its done on the server. But when I go to access the files I am able to delete faculty folders where I had set the permissions to "read only" so I am wondering if there is a streamlined way of going about this or if I should just start from scratch and use all brand new HDD's?
Please Help!Hi ..
Try the tips mentioned here > Mini-tutorial: Force-deleting stubborn or problematic files in Mac OS X -
Iphone 4 front camera not working even after reboot,resets and restore.
i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help meIf setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center -
Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????
SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.
-
My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode use one of these programs.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?
Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html -
Social App not working even after update from noki...
nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice" -
The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSEHow does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too. -
After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.
Have you run it in a debugger? That will show you exactly what is happening and why.
-
Change Button Not Active even after Delivery Completion Indicator is Remove
Hi ,
In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
Thanks & Regards,Hi,
Please check these notes.
Note 1267916 - PO item flags do not stay checked
Note 1174982 - Return/deletion of confirmation does not update the PO flag
Thanks
Zameer -
my sytem preferences remains in hang and is not responding even after force quit,may i have suggestion la
Hello: Welcome to Apple Support Communities!
Could you specify the Mac OS X version and also what computer you
are using it on, with some detail? Some of these kinds of issues, while
they may seem the same across various years of OS X, can have
different causes and also different cures.
With that information, someone may be capable of researching a reply
most suited to try & see if it works in your computer + OS X system.
One idea, which may/may not help, would be to start the computer
from its most recent OS X DVD install disc, unless it has OS X 10.7
or Later, where there is a Recovery partition on the HDD to boot from.
Then use Disk Utility> repair disk, while there, also repair permissions.
Thanks.
Good luck & happy computing! -
Ipod touch screen not working even after resetting to factory specs
ipod touch screen not working even after resetting to factory spec. lock symbol appears at top
That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.
-
Webcam is not working even after I reinstall the system software
My webcam is not working even after I reinstall the system software.
My questions are follows:
Should I bring it to repair or get a external webcam?
At approximately how much would be cost for repair?
Which webcam I should get?
Thank you very much!
TianUpdate, I fixed it although it feels more like a workaround. I had to enable the extension in extension manager. That still left a blank panel, but once I closed and reopened the panel I was prompted to login. Seems that closing and reopening the panel is the fix once it is enabled.
Maybe you are looking for
-
What does this mean, and how do you fix it? "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender." Trying to install iTunes 10.7, f
-
Officejet Pro 8600 scan to computer with Mac OS 10.6.8
I have reinstalled the software, selecting HP Recommended Software. I have restarted the computer and done a software update. I can print from my computer to the printer. But I cannot "scan to computer" using the touchpad on the front of the print
-
Most recent gnome-shell update (3.2.0-2) is eating my cpu alive!
Ever since I updated to the 3.2.0-2 gnome-shell, my cpu sits at around 60% idle. This slows down a lot of things including overlay mode. Is anyone else experiencing this? There was also the kernel update (3.0.6-1), not sure if this would contribute
-
Edit the [LDF] database file
Hi, I'm searching a way that can edit the database file *.ldf, cause some customers wouldn't put the Signal_endcoding_types in the ldf file. I need a way to save the "encoding" in the file with labview UI. I've found some old APIs for ldf file, but I
-
Hello there, I am a Rookie in using Mac OS X Server I just finished installing he Software on a MacMini Server. Unfortunallity there are some little troubles after starting up that I don't understand. Can you please help me deciding, what is critical