Output types are different in VF02 than in VF03 (A particular output type Z*** does not appear in VF03)
Hi Experts,
When I check the billing document (Go to>Header>Output) there are 3 output types. After executing VF02, an output type is added (EDI). Why does this particular output type (Z***) not appear in VF03?
- What are the related configurations for this?
- Is this a possible ABAP issue? To my knowledge, custom programs usually do not result to this kind of behavior.
Thanks in advanced,
Jack
Jack Rockefeller wrote:
I'm not a functional consultant but an ABAP consultant.
Ah, OK, that explains it. Jack, I'm sorry but it's not quite feasible to explain the whole output determination configuraton in a discussion post. Here is a wiki page if you have some time for reading. It's not very thorough but you could google for more. But it would be more efficient to just ask an SD consultant.
Also in VF02 look at the Output Determination analysis (it's somewhere in the menu in the Output screen) and see if it makes any sense to you.
Similar Messages
-
Type (..) of the context element (..) in view (..) does not exist
Hi all
I have got an question. I have an ABAP webdynpro with a context node which is connected to an ABAP structure.
The context node is mapped to a context node of a view and the fields of the view are mapped to the context node of the view. So the data is send through them. That works fine.
Within this ABAP structure i have added 3 extra new fields. After creating them i activated the structure.
Within the webdynpro i have updated the context mapping between the node and the structure and also between the different mappings between the views and the componentcontroller where this node is used,
Within the context tab of all the views i see all the three new fields.
When i try to map those fields to a field in the screen it cannot be done. i get the following message:
Type (..) of the context element (..) in view (..) does not exist
Anf the new fields are gray.
Does anybody know the solution for this?
kind regards,
Anton PierhagenHi all
Thanks for all of the replies. But unfortunately the right answer wasn't there.
I had tried to map the structure and re-create the node on several levels in my web-dynpro, but there was no change after this changes.
When i created an own dataelement and an own domain in my ABAP structure, it worked.
I could select them in the webdynpro. But why????
i still not get it..
But thanks for the replies!
Kind regards,
Anton Pierhagen -
I took 6 panorama shots of a scene and used CC to Photomerge them as one. Couldn't see where to automatic blend the edges and there was 'stitch' lines when the images were merged. So i did the same in Elements 11 and it was perfect. Am i doing something wrong in CC or perhaps not doing something at all?
Any help, please?
DaveHi - Thanks for taking the time to reply and i appreciate the remarks- if a little harsh- we all have to start somewhere and i am fully aware of the limitations of Elements which is why i decided to add CC to my software. I can only say that if an inferior quality software from Adobe does the job well then CC must also be suited to doing the same which is why i can only think, from your comments, that i have not done something simple- however- following tutorials to get to the end result should have sufficed- it didn't so perhaps i will consider posting the difference between the two applications- and, perhaps suffer a few more 'harsh' comments. The learning curve is quite steep and i am a visual learner, but i'm also not totally incompetent:)
Kind Regards
Dave Munn
Original message----
From : [email protected]
Date : 02/02/2015 - 06:45 (GMTST)
To : [email protected]
Subject : why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
created by station_two in Photoshop General Discussion - View the full discussion
First a clarification: you are not addressing Adobe here in these user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
I'll give it my best shot anyway.
Few folks in this forum are really familiar with Elements, for which there's a dedicated, totally separate forum.
Different engineering teams, also.
From this perspective, it will be difficult to give you a direct answer to your "why?" question.
Personally, I blend very large panorama shots in Photoshop proper since I can't even remember when without any issues whatsoever, up to and including in Photoshop CS6 13.0.6.
Without being at your computer and without looking at your images, I couldn't even begin to speculate what you are doing wrong in Photoshop, which I suspect you are. The least you could show is post examples from your panoramas that have gone wrong.
I can tell you that panorama stitching requires significant overlap between the individual shots, besides common-sdense techniques like a very solid tripod and precision heads.
The only version of Elements I have ever used for any significant time was Elements 6 for Windows, which I bought in 2008 to use on a PC (I've been an avid Mac user for 30 years). I found Elements so limited and so bad that I successfully demanded a refund from Adobe. IU mention this only to emphasize that I can truly only address your question from a Photoshop (proper) and Mac user point of view. I couldn't care less about Elements, but if you have comparison examples of panoramas processed in both applications, by all means post those two.
Generally speaking Photoshop is a professional level application that makes no apologies for its very long and steep learning curve, while Photoshop has many hand-holding features for amateurs and beginners.
Perhaps the bottom line is that you should stick with Elements if you personally manage to get better results there.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7152397#7152397 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7152397#7152397
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
<Edited By Host>Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?
-
Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
== todayMy daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
exception-type in web.xml does not appear to work
WLS 60 SP1 (#101616)
<exception-type> in web.xml does not appear to work. WLS shows standard
"Internal error 500" page instead of a custom error page. The custom error
page is shown if <error-code> is used instead of <exception-type>.
Any ideas? Thanks
Can you show me some of your code? This works for me.
Also, you say that you are working with 6.0sp3. Are you sure? sp3 hasn't been
released yet, except in a very limited beta. (I believe only internally, but I
could be wrong about that.)
David
[email protected] wrote:
Hi all,
I have created a very simple servlet and an index.html file with a link
to it, then packaged it into a WAR file with the appropriate web.xml and
ias-web.xml files. I then created an application.xml file referencing
only this servlet and adding a context root. After deployment via
"iasdeploy deployapp simple.ear" and cycling the web server, I can reach
the welcome file (index.html) correctly
-"http://localhost/NASApp/simple". When I attempt to follow the link to
the servlet ("simple servlet") the URL ends
up as "http://localhost/NASApp/SimpleServlet" whereas it should be
http://localhost/NASApp/simple/SimpleServlet If I type that url in, the
servlet executes fine.
I've deployed this into Tomcat and get the behavior I expect. It appears
that the element in the application.xml file is ignored by
iAS.
I'm using iAS SP3 on Win2k (same problem on NT).
This is such a basic behavior that I can't believe this is an existing
bug. I must be doing something wrong...
Any ideas?
Thanks in advance,
-Glen
Files are attached.
Name: simple.ear
simple.ear Type: application/x-unknown-content-type-ear_auto_file
Encoding: base64
Description: filename="simple.ear" -
Content type problem for 'does not appear to be a proper arcive'
Hi all,
The following code will create a ZipOutputStream using ByteArrayOutputStream (not FileOutputStream) and attach the outputstream to a MIME multipart email using ByteArrayDataSource (so the file never exists physically).
It works and sends the email but the zip 'does not appear to be a valid archive' even though it looks about the right size. If I do the same and use FileOutputStream to create a physical file it works OK. I think it is an issue with the content type, or maybe this just isn't possible!
I have tried:
byteArray.toByteArray(),
byteArray.toString().getBytes() and application/zip & application/unknown.
Can anyone help or suggest an alternative way to create a 'in-memory' zip file that can then be emailed?
Many thanks
// Specify files to be zipped
String[] filesToZip = new String[3];
filesToZip[0] = "C:\\Program Files\\NetBeans3.6\\firstfile.txt";
filesToZip[1] = "C:\\Program Files\\NetBeans3.6\\secondfile.txt";
filesToZip[2] = "C:\\Program Files\\NetBeans3.6\\thirdfile.txt";
byte[] buffer = new byte[18024];
// Specify zip file name
String zipFileName= eq_rt.getReportName() + ".zip";
try {
// Create ZipOutputStream to store the FileOutputStream
//ZipOutputStream out = new ZipOutputStream(new FileOutputStream(zipFileName));
ByteArrayOutputStream byteArray = new ByteArrayOutputStream();
ZipOutputStream out = new ZipOutputStream(byteArray);
// Set the compression ratio
out.setLevel(Deflater.DEFAULT_COMPRESSION);
// iterate through the array of files, adding each to the zip file
for (int a = 0; a < filesToZip.length; a++) {
System.out.println(a);
// // Associate a file input stream for the current file
FileInputStream in = new FileInputStream(filesToZip[a]);
// This ROCKS as it is passing a array into the text file .getBytes() seems
// to be the KEY in getting ByteArrayInputStream to WORK
String strSocketInput = "TAIWAN";
ByteArrayInputStream baIn = new ByteArrayInputStream(strSocketInput.getBytes());
//ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc() ) );
// Add ZIP entry to output stream.
out.putNextEntry(new ZipEntry(filesToZip[a]));
// Transfer bytes from the current file to the ZIP file
int len;
while ((len = baIn.read(buffer)) > 0)
out.write(buffer, 0, len);
// Close the current entry
out.closeEntry();
// Close the current file input stream
baIn.close();
// DataSource sourcezip = new FileDataSource(zipFileName);
//DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/octet-stream");
DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/octet-stream" );
// Create a new MIME bodypart
BodyPart attachment = new MimeBodyPart();
attachment.setDataHandler(new DataHandler(sourcezip));
attachment.setFileName(zipFileName);
/* attach the attachemnts to the mail */
multipart.addBodyPart(attachment);
// Close the ZipOutPutStream
out.close();Many thanks Dr Clap. Moving the Closing the ZipOutputStream before I attached it to the email solved my problem.
/* Close the ZipOutPutStream (very important to close the zip before you attach it to the email) Thanks DrClap */
out.close();
/* Create a datasource for email attachment */
// DataSource sourcezip = new FileDataSource(zipFileName);
DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/zip" );
/* Create a new MIME bodypart */
BodyPart attachment = new MimeBodyPart();
attachment.setDataHandler(new DataHandler(sourcezip));
attachment.setFileName(zipFileName);
/* attach the attachemnts to the mail */
multipart.addBodyPart(attachment); -
Field functional area does not appear as an entry field into the document..
Hi,
We are using the functional area field in our system. In order to access this field, we proceeded
to customize the system as follows:
- We already activate Cost of Sales Accounting for our Company Code.
- The field functional area was set optional through transaction OB41, for the posting keys required.
- The field functional area was set optional using transaction OB14, for the field status group assigned to the GL accounts.
However, we cannot enter the area functional when we are posting documents related to customers and vendors.
Although the field functional area was set optional, it does not appear as an entry field into the document screen for the
different transactions: fb70, fb60, f-02,fb01. It is only happening when we areentering the document position for the vendor/customer.
Regards,
EfrainHi,
In FB70 or FB60 change the layout ........ select the line item layout configuration, you get a separate Table Settings screen pop up where in you need to select "Administrator" button the system displays another pop up window where in you can check whether the Functional Area field is checked as invisible if so remove the check mark and active the settings.
Kind Regards -
Dear Sir
The statement "forget your answer" in the security support does not appear in my i-pad air ,as well as ,I have more than 2 e-mails added in my i padI have a very similar problem but I have done the 5 Rs and more---multiple times--and my iPOD and iTunes are just stuck in an endless cycle of Restore and Restart but rather than showing up in the source panel so I can put my music back on, the icon appears and tells me to restore again. I did everything including checking my USB ports etc. in My Computer and my iPOD refuses to get out of this cycle when iTUNES does bother to recognize it. Any suggestions other than the 5 Rs---because they are doing absolutely nothing.
-
The selected file does not appear to be a valid comma separated values (csv) file or a valid tab delimited file. Choose a different file.
I guess your question is, "what's wrong with the file?"
You're going to have to figure that out yourself, as we cannot see the file.
Importing into Address book requires either a tab-delimited or a comma-delimited file. You can export out of most spreadsheets into a csv file. However, you need to make sure you clean up the file first. If you have a field that has commas in the field, they will create new fields at the comma. So, some lines will have more fields than the others, causing issues like the error you saw. -
I ask for help, I can not cancel a monthly subscription to Adobe.
contrary to the tutorial does not appear scribed "CANCEL PLAN" on my page management plan, is not worse than any serial number of my subscription, where is it? how can I cancel monthly charge?Just to clarify: This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
Have you done a Forum search?
How can I delete my account? There is no "cancel plan" in my creative cloud free membership.
Contact Customer Care -
When I try to email a picture the space to type a comment with the picture does not appear
When I try to email a picture with a message, the space to type a message does not appear. Why?
If you get no response after starting 6 threads on an issue, it's worth looking at question you are asking over and over. Perhaps you need to re-think it. Perhaps you need to give more details - how you're emailing, with what apps, a fuller description of the issue and perhaps even a screenshot, anything that might help other people understand what you're asking.
Regards
TD -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome
Press the escape (esc) key to exit full-screen mode.
-
How can I have my contacts back on my phone? some of them does not appear, others are still there ? How can I have them back?
Welcome to the Apple Community.
Try unchecking the tones and syncing, then re-checking them and syncing again.
Maybe you are looking for
-
10g install simply stops at 'Cloning database creation in progress,' part of the Oracle Database configuration assistant phase in the Universal Installer. I cannot see any error outputs, but this phase stops at 45% complete. I tried three times now,
-
Question says it all: I can still see and play music from another home shared Mac, but in this latest iTunes version the option dialogue (to limit the items displayed to those not already on the viewing computer) at the bottom of the window is no lon
-
I did as people said to go the apple iD manage account and password and security and to get in i have to answer the security questions but i dont know what they are please help because im trying to purchases something on this computer as it is my fir
-
I want change my apple store to united arab emirates.
Dear Sir / Madam, I want change my apple store country to united arab emirates , but I cannot becouse my account balance 00.20 $ . Please remove 00.20 and change my apple store to united arab emirates. Thanks Regards, Omar
-
How to embed Flash without Javascript?
How to embed Flash without Javascript? Other way to ask this: if user desactivates Javascript, sill Flash content still be visible? Thanks for helping.