Output using Blackmagic HD - Help needed!

I am trying to output via Decklink a DVCProHD 50 sequence and use the Blackmagic downconverter to get it on to DigiBeta. But when I try to tell FCP to use the same compressor for video playback the drop down doesn't give me a DVCProHD 50 option. Can anyone explain what I'm doing wrong and how I can get the sequence out before Monday !!
Thanks in advance.

Hey Jeremy
Welcome to the forum.
I'm not a work, so dare not claim catagorically, but could it be that DVCPRO HD 50 doesn't exist ?
surely its either DVCPRO HD or DVCPRO 50 (i suppose the former might reasonably be called DVCPro100)
if you're looking for DVCPRO 50 its often just called DV50, if you're looking for DVCPRO HD then make sure it isn't hiding behind a prefix like HDTV 1080 or HDTV 720 etc (you need to specify all this)
hope it helps
Andy

Similar Messages

  • Between 31-180days  using Sysdate function -Help needed

    I am not getting any data in between 31 days and 180days in table
    Cust_lst_prch_dt :
    02/19/2009
    01/20/2009
    My query :
    select CUST_LST_PRCH_DT from order_table
    where CUST_LST_PRCH_DT>=trunc(sysdate)-31
    and CUST_LST_PRCH_DT<=trunc(sysdate)-180
    Please help me with my query
    Regards,
    clar

    Because you want it to be
    CUST_LST_PRCH_DT BETWEEN trunc(sysdate)-180 AND trunc(sysdate)-31?
    I'm guessing you mixed up your lower / upper boundary conditions in your query. However as i said, it's guessing since you've provided very little information.

  • Query using Group by - help needed

    I am having a query as follows:
    select id_nbr, stop_nbr, street || city || state, count(sub_stop_nbr)
    from details where created_date = ' 22-Jul-08';
    As group by clause is missing it is giving errors.
    But when I add group by to this query, I have to add all selected values.
    How can I add the concatenatd values here.
    Is there any other way rather than writing as :
    (select id_nbr, stop_nbr, street || city || state, count(sub_stop_nbr)
    from details where created_date = ' 22-Jul-08'
    group by id_nbr, stop_nbr, street || city || state)

    so where is the problem in writing:
    select id_nbr, stop_nbr, street || city || state, count(sub_stop_nbr)
    from details
    where created_date = ' 22-Jul-08'
    group by id_nbr, stop_nbr, street || city || state
    ????

  • Editable field with F4 help in alv tree output using cl_gui_alv_tree

    HI
    i need Editable field with F4 help in alv tree output using cl_gui_alv_tree
    Regards
    Naresh

    Hi Naresh,
    Pass the field catalog with the additional parameter (ls_fcat-edit = 'X'.).
    for F4 help if the data element have the search help it automatically will come. other wise include the additional parameter in the field catalog (ls_fcat-F4AVAILABL = 'X')
    Reward if found helpful.
    Regards,
    Boobalan Suburaj

  • Help needed  while exporting crystal reports to HTML file format using java

    Help needed  while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
    html file of the report
    thanks

    the ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
    Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM

  • Help needed for using BASIC authentication through JDBCRealm

    Help needed.
    Hello,
    I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
    My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
    My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
    Thank you very much.

    You can set this up for your context using META-INF/context.xml instead of working with server.xml.
    Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
    <?xml version="1.0" encoding="UTF-8"?>
    <Context path="/myApp" reloadable="true">
        <Realm
            className="org.apache.catalina.realm.JDBCRealm"            
            driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"         
            connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
            connectionName="username" connectionPassword="password"
            digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
            userRoleTable="user_roles" roleNameCol="rolename"
        />
    </Context>Hope this helps.
    People on the forum help others voluntarily, it's not their job.
    Help them help you.
    Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
    ----------------------------------------------------------------

  • Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

    Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

    Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
    Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
    See http://www.alsoft.com/diskwarrior/

  • Help needed please.. how do I remove my credit card from itunes? just discovered over $450 of charges when I looked at my email... Kids had no clue they were using our money and not their gift cards

    Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    Accepted forms of payment  >  http://support.apple.com/kb/HT5552
    Changing Account Information  >  http://support.apple.com/kb/HT1918

  • Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

    Hi!
    Need some help with the same:
    Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

    Hi sameer197301 and welcome to the BlackBerry Support Community Forums!
    To clarify, are you seeing this message displayed on your BlackBerry® smartphone or on your computer?
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Help needed Displaying ALV  Secondary list without using oops concept

    Hi Experts
    Help needed Displaying ALV  Secondary list without using oops concept.
    its urgent
    regds
    rajasekhar

    hi chk this code
    ******************TABLES DECLARATION*****************
    TABLES : VBAP,MARA.
    *****************TYPE POOLS**************************
    TYPE-POOLS : SLIS.
    ****************INTERNAL TABLES**********************
    DATA : BEGIN OF IT_VBAP OCCURS 0,
    VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
    POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
    MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
    END OF IT_VBAP.
    ****************TEMPORARY VARIABLES******************
    DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
    DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
    *****************FIELD CATALOG***********************
    DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
           WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
    ****************LAYOUT*******************************
    DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
    ***************VARIANT*******************************
    DATA : G_VARIANT LIKE DISVARIANT.
    ****************SAVE*********************************
    DATA : G_SAVE(1) TYPE C.
    *****************EVENTS******************************
    DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
           G_EVENTS TYPE SLIS_T_EVENT.
    ******************PF STATUS**************************
    DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
    ******************USER COMMAND************************
    DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
           R_UCOMM LIKE SY-UCOMM.
    ****************SELECTION SCREEN************************
    SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
    ***************AT SELECTION SCREEN*********************
    AT SELECTION-SCREEN.
      PERFORM VALIDATE.
    **************START-OF-SELECTION**************************
    START-OF-SELECTION.
      PERFORM GET_DETAILS.
      PERFORM FIELDCAT.
      PERFORM LAYOUT.
      PERFORM VARIANT.
      PERFORM SAVE.
      PERFORM EVENTS.
      PERFORM ALV_DISPLAY.
    *********************FORMS*******************************************
    *&      Form  validate
          text
    -->  p1        text
    <--  p2        text
    FORM VALIDATE .
      SELECT SINGLE VBELN
                    FROM VBAP
                    INTO V_VBELN
                    WHERE VBELN IN S_VBELN.
      IF SY-SUBRC <> 0.
        MESSAGE E000 WITH 'enter valid vbeln'.
      ENDIF.
    ENDFORM.                    " validate
    *&      Form  get_details
          text
    -->  p1        text
    <--  p2        text
    FORM GET_DETAILS .
      SELECT VBELN
             POSNR
             MATNR
             FROM VBAP
             INTO TABLE IT_VBAP
             WHERE VBELN IN S_VBELN.
      IF SY-SUBRC <> 0.
        MESSAGE E000 WITH 'no details found'.
      ENDIF.
    ENDFORM.                    " get_details
    *&      Form  fieldcat
          text
    -->  p1        text
    <--  p2        text
    FORM FIELDCAT .
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'VBELN'.
      WA_FIELDCAT-OUTPUTLEN = 10.
      WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'POSNR'.
      WA_FIELDCAT-OUTPUTLEN = 6.
      WA_FIELDCAT-SELTEXT_L = 'ITEM'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'MATNR'.
      WA_FIELDCAT-OUTPUTLEN = 18.
      WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
    ENDFORM.                    " fieldcat
    *&      Form  LAYOUT
          text
    -->  p1        text
    <--  p2        text
    FORM LAYOUT .
      WA_LAYOUT-ZEBRA = 'X'.
    ENDFORM.                    " LAYOUT
    *&      Form  VARIANT
          text
    -->  p1        text
    <--  p2        text
    FORM VARIANT .
      CLEAR G_VARIANT.
      G_VARIANT-REPORT = SY-REPID.
    ENDFORM.                    " VARIANT
    *&      Form  SAVE
          text
    -->  p1        text
    <--  p2        text
    FORM SAVE .
      CLEAR G_SAVE.
      G_SAVE = 'A'.
    ENDFORM.                    " SAVE
    *&      Form  EVENTS
          text
    -->  p1        text
    <--  p2        text
    FORM EVENTS .
      CLEAR XS_EVENTS.
      XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
      XS_EVENTS-FORM = 'TOP_OF_PAGE'.
      APPEND XS_EVENTS TO G_EVENTS.
    ENDFORM.                    " EVENTS
    *&      Form  TOP_OF_PAGE
          text
    FORM TOP_OF_PAGE.
      WRITE :/ ' INTELLI GROUP'.
    ENDFORM.                    "TOP_OF_PAGE
    *&      Form  ALV_DISPLAY
          text
    -->  p1        text
    <--  p2        text
    FORM ALV_DISPLAY .
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK              = ' '
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                = ' '
         I_CALLBACK_PROGRAM             = SY-REPID
         I_CALLBACK_PF_STATUS_SET       = PF_STATUS
         I_CALLBACK_USER_COMMAND        = USER_COMMAND
      I_STRUCTURE_NAME               =
         IS_LAYOUT                      = WA_LAYOUT
         IT_FIELDCAT                    = IT_FIELDCAT
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
      IT_SORT                        =
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_DEFAULT                      = 'X'
         I_SAVE                         = G_SAVE
         IS_VARIANT                     = G_VARIANT
         IT_EVENTS                      = G_EVENTS
      IT_EVENT_EXIT                  =
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_SCREEN_START_COLUMN          = 0
      I_SCREEN_START_LINE            = 0
      I_SCREEN_END_COLUMN            = 0
      I_SCREEN_END_LINE              = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
        TABLES
          T_OUTTAB                       = IT_VBAP
       EXCEPTIONS
         PROGRAM_ERROR                  = 1
         OTHERS                         = 2
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " ALV_DISPLAY
    *&      Form  SET_PF_STATUS
          text
    FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
    ENDFORM.                    "SET_PF_STATUS
    *&      Form  SET_USER_COMMAND
          text
    FORM SET_USER_COMMAND USING R_UCOMM
                                RS_SELFIELD TYPE SLIS_SELFIELD.
      CASE R_UCOMM.
        WHEN 'DC'.
          READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
          IF SY-SUBRC = 0.
            SELECT SINGLE MTART
                          FROM MARA
                          INTO V_MTART
                          WHERE MATNR = IT_VBAP-MATNR.
            IF SY-SUBRC <> 0.
       MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
            ELSE.
              WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
              WRITE :/ 'MATERIAL TYPE :' , V_MTART.
            ENDIF.
          ENDIF.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
        WHEN 'EXIT'.
          LEAVE TO SCREEN 0.
        WHEN 'CLOSE'.
          CALL TRANSACTION 'SE38'.
      ENDCASE.
    REPORT  Z_ALV_INTERACTIVE  MESSAGE-ID ZMSG_50651
                                    LINE-SIZE 100
                                    LINE-COUNT 60
                                    NO STANDARD PAGE HEADING.
    ******************TABLES DECLARATION*****************
    TABLES : VBAP,MARA.
    *****************TYPE POOLS**************************
    TYPE-POOLS : SLIS.
    ****************INTERNAL TABLES**********************
    DATA : BEGIN OF IT_VBAP OCCURS 0,
    VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
    POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
    MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
    END OF IT_VBAP.
    ****************TEMPORARY VARIABLES******************
    DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
    DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
    *****************FIELD CATALOG***********************
    DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
           WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
    ****************LAYOUT*******************************
    DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
    ***************VARIANT*******************************
    DATA : G_VARIANT LIKE DISVARIANT.
    ****************SAVE*********************************
    DATA : G_SAVE(1) TYPE C.
    *****************EVENTS******************************
    DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
           G_EVENTS TYPE SLIS_T_EVENT.
    ******************PF STATUS**************************
    DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
    ******************USER COMMAND************************
    DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
           R_UCOMM LIKE SY-UCOMM.
    ****************SELECTION SCREEN************************
    SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
    ***************AT SELECTION SCREEN*********************
    AT SELECTION-SCREEN.
      PERFORM VALIDATE.
    **************START-OF-SELECTION**************************
    START-OF-SELECTION.
      PERFORM GET_DETAILS.
      PERFORM FIELDCAT.
      PERFORM LAYOUT.
      PERFORM VARIANT.
      PERFORM SAVE.
      PERFORM EVENTS.
      PERFORM ALV_DISPLAY.
    *********************FORMS*******************************************
    *&      Form  validate
          text
    -->  p1        text
    <--  p2        text
    FORM VALIDATE .
      SELECT SINGLE VBELN
                    FROM VBAP
                    INTO V_VBELN
                    WHERE VBELN IN S_VBELN.
      IF SY-SUBRC <> 0.
        MESSAGE E000 WITH 'enter valid vbeln'.
      ENDIF.
    ENDFORM.                    " validate
    *&      Form  get_details
          text
    -->  p1        text
    <--  p2        text
    FORM GET_DETAILS .
      SELECT VBELN
             POSNR
             MATNR
             FROM VBAP
             INTO TABLE IT_VBAP
             WHERE VBELN IN S_VBELN.
      IF SY-SUBRC <> 0.
        MESSAGE E000 WITH 'no details found'.
      ENDIF.
    ENDFORM.                    " get_details
    *&      Form  fieldcat
          text
    -->  p1        text
    <--  p2        text
    FORM FIELDCAT .
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'VBELN'.
      WA_FIELDCAT-OUTPUTLEN = 10.
      WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'POSNR'.
      WA_FIELDCAT-OUTPUTLEN = 6.
      WA_FIELDCAT-SELTEXT_L = 'ITEM'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'MATNR'.
      WA_FIELDCAT-OUTPUTLEN = 18.
      WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
    ENDFORM.                    " fieldcat
    *&      Form  LAYOUT
          text
    -->  p1        text
    <--  p2        text
    FORM LAYOUT .
      WA_LAYOUT-ZEBRA = 'X'.
    ENDFORM.                    " LAYOUT
    *&      Form  VARIANT
          text
    -->  p1        text
    <--  p2        text
    FORM VARIANT .
      CLEAR G_VARIANT.
      G_VARIANT-REPORT = SY-REPID.
    ENDFORM.                    " VARIANT
    *&      Form  SAVE
          text
    -->  p1        text
    <--  p2        text
    FORM SAVE .
      CLEAR G_SAVE.
      G_SAVE = 'A'.
    ENDFORM.                    " SAVE
    *&      Form  EVENTS
          text
    -->  p1        text
    <--  p2        text
    FORM EVENTS .
      CLEAR XS_EVENTS.
      XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
      XS_EVENTS-FORM = 'TOP_OF_PAGE'.
      APPEND XS_EVENTS TO G_EVENTS.
    ENDFORM.                    " EVENTS
    *&      Form  TOP_OF_PAGE
          text
    FORM TOP_OF_PAGE.
      WRITE :/ ' INTELLI GROUP'.
    ENDFORM.                    "TOP_OF_PAGE
    *&      Form  ALV_DISPLAY
          text
    -->  p1        text
    <--  p2        text
    FORM ALV_DISPLAY .
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK              = ' '
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                = ' '
         I_CALLBACK_PROGRAM             = SY-REPID
       I_CALLBACK_PF_STATUS_SET         = PF_STATUS
         I_CALLBACK_USER_COMMAND        = USER_COMMAND
      I_STRUCTURE_NAME               =
         IS_LAYOUT                      = WA_LAYOUT
         IT_FIELDCAT                    = IT_FIELDCAT
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
      IT_SORT                        =
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_DEFAULT                      = 'X'
         I_SAVE                         = G_SAVE
        IS_VARIANT                      = G_VARIANT
         IT_EVENTS                      = G_EVENTS
      IT_EVENT_EXIT                  =
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_SCREEN_START_COLUMN          = 0
      I_SCREEN_START_LINE            = 0
      I_SCREEN_END_COLUMN            = 0
      I_SCREEN_END_LINE              = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
        TABLES
          T_OUTTAB                       = IT_VBAP
       EXCEPTIONS
         PROGRAM_ERROR                  = 1
         OTHERS                         = 2
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " ALV_DISPLAY
    *&      Form  SET_PF_STATUS
          text
    FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
    ENDFORM.                    "SET_PF_STATUS
    *&      Form  SET_USER_COMMAND
          text
    FORM SET_USER_COMMAND USING R_UCOMM
                                RS_SELFIELD TYPE SLIS_SELFIELD.
      CASE R_UCOMM.
        WHEN 'DC'.
          READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
          IF SY-SUBRC = 0.
            SELECT SINGLE MTART
                          FROM MARA
                          INTO V_MTART
                          WHERE MATNR = IT_VBAP-MATNR.
            IF SY-SUBRC <> 0.
       MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
            ELSE.
              WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
              WRITE :/ 'MATERIAL TYPE :' , V_MTART.
      SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
                        WITH P_MTART EQ V_MTART.
            ENDIF.
          ENDIF.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
        WHEN 'EXIT'.
          LEAVE TO SCREEN 0.
        WHEN 'CLOSE'.
          CALL TRANSACTION 'SE38'.
      ENDCASE.
    plz reward if useful

  • I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

    I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

    ''I figured it was going to be FAFSA causing your problem.''
    Install Portable Firefox 3.6.x to your hard drive for that one website. It won't affect your current Firefox installation at all. <br />
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • Help needed:Printing HTML file using javax.print

    Hi
    I am using the following code which i got form the forum for rpinting an HTML file.
    The folllowing code is working fine, but the problem is the content of HTML file is not getting printed. I am geeting a blank page with no content. What is the change that is required in the code? ALso is there any simpler way to implement this. Help needed ASAP.
    public boolean printHTMLFile(String filename) {
              try {
                   JEditorPane editorPane = new JEditorPane();
                   editorPane.setEditorKit(new HTMLEditorKit());
                   //editorPane.setContentType("text/html");
                   editorPane.setSize(500,500);
                   String text = getFileContents(filename);
                   if (text != null) {
                        editorPane.setText(text);                    
                   } else {
                        return false;
                   printEditorPane(editorPane);
                   return true;
              } catch (Exception tce) {
                   tce.printStackTrace();
              return false;
         public String getFileContents(String filename) {
              try {
                   File file = new File(filename);
                   BufferedReader br = new BufferedReader(new FileReader(file));
                   String line;
                   StringBuffer sb = new StringBuffer();
                   while ((line = br.readLine()) != null) {
                        sb.append(line);
                   br.close();
                   return sb.toString();
              } catch (Exception tce) {
                   tce.printStackTrace();
              return null;
         public void printEditorPane(JEditorPane editorPane) {
                   try {
                        HTMLPrinter htmlPrinter = new HTMLPrinter();
                        htmlPrinter.printJEditorPane(editorPane, htmlPrinter.showPrintDialog());
                   } catch (Exception tce) {
                        tce.printStackTrace();
         * Sets up to easily print HTML documents. It is not necessary to call any of the setter
         * methods as they all have default values, they are provided should you wish to change
         * any of the default values.
         public class HTMLPrinter {
         public int DEFAULT_DPI = 72;
         public float DEFAULT_PAGE_WIDTH_INCH = 8.5f;
         public float DEFAULT_PAGE_HEIGHT_INCH = 11f;
         int x = 100;
         int y = 80;
         GraphicsConfiguration gc;
         PrintService[] services;
         PrintService defaultService;
         DocFlavor flavor;
         PrintRequestAttributeSet attributes;
         Vector pjlListeners = new Vector();
         Vector pjalListeners = new Vector();
         Vector psalListeners = new Vector();
         public HTMLPrinter() {
              gc = null;
              attributes = new HashPrintRequestAttributeSet();
              flavor = null;
              defaultService = PrintServiceLookup.lookupDefaultPrintService();
              services = PrintServiceLookup.lookupPrintServices(flavor, attributes);
              // do something with the supported docflavors
              DocFlavor[] df = defaultService.getSupportedDocFlavors();
              for (int i = 0; i < df.length; i++)
              System.out.println(df.getMimeType() + " " + df[i].getRepresentationClassName());
              // if there is a default service, but no other services
              if (defaultService != null && (services == null || services.length == 0)) {
              services = new PrintService[1];
              services[0] = defaultService;
         * Set the GraphicsConfiguration to display the print dialog on.
         * @param gc a GraphicsConfiguration object
         public void setGraphicsConfiguration(GraphicsConfiguration gc) {
              this.gc = gc;
         public void setServices(PrintService[] services) {
              this.services = services;
         public void setDefaultService(PrintService service) {
              this.defaultService = service;
         public void setDocFlavor(DocFlavor flavor) {
              this.flavor = flavor;
         public void setPrintRequestAttributes(PrintRequestAttributeSet attributes) {
              this.attributes = attributes;
         public void setPrintDialogLocation(int x, int y) {
              this.x = x;
              this.y = y;
         public void addPrintJobListener(PrintJobListener pjl) {
              pjlListeners.addElement(pjl);
         public void removePrintJobListener(PrintJobListener pjl) {
              pjlListeners.removeElement(pjl);
         public void addPrintServiceAttributeListener(PrintServiceAttributeListener psal) {
              psalListeners.addElement(psal);
         public void removePrintServiceAttributeListener(PrintServiceAttributeListener psal) {
              psalListeners.removeElement(psal);
         public boolean printJEditorPane(JEditorPane jep, PrintService ps) {
                   if (ps == null || jep == null) {
                        System.out.println("printJEditorPane: jep or ps is NULL, aborting...");
                        return false;
                   // get the root view of the preview pane
                   View rv = jep.getUI().getRootView(jep);
                   // get the size of the view (hopefully the total size of the page to be printed
                   int x = (int) rv.getPreferredSpan(View.X_AXIS);
                   int y = (int) rv.getPreferredSpan(View.Y_AXIS);
                   // find out if the print has been set to colour mode
                   DocPrintJob dpj = ps.createPrintJob();
                   PrintJobAttributeSet pjas = dpj.getAttributes();
                   // get the DPI and printable area of the page. use default values if not available
                   // use this to get the maximum number of pixels on the vertical axis
                   PrinterResolution pr = (PrinterResolution) pjas.get(PrinterResolution.class);
                   int dpi;
                   float pageX, pageY;
                   if (pr != null)
                        dpi = pr.getFeedResolution(PrinterResolution.DPI);
                   else
                        dpi = DEFAULT_DPI;
                   MediaPrintableArea mpa = (MediaPrintableArea) pjas.get(MediaPrintableArea.class);
                   if (mpa != null) {
                        pageX = mpa.getX(MediaPrintableArea.INCH);
                        pageY = mpa.getX(MediaPrintableArea.INCH);
                   } else {
                        pageX = DEFAULT_PAGE_WIDTH_INCH;
                        pageY = DEFAULT_PAGE_HEIGHT_INCH;
                   int pixelsPerPageY = (int) (dpi * pageY);
                   int pixelsPerPageX = (int) (dpi * pageX);
                   int minY = Math.max(pixelsPerPageY, y);
                   // make colour true if the user has selected colour, and the PrintService can support colour
                   boolean colour = pjas.containsValue(Chromaticity.COLOR);
                   colour = colour & (ps.getAttribute(ColorSupported.class) == ColorSupported.SUPPORTED);
                   // create a BufferedImage to draw on
                   int imgMode;
                   if (colour)
                        imgMode = BufferedImage.TYPE_3BYTE_BGR;
                   else
                        imgMode = BufferedImage.TYPE_BYTE_GRAY;
                   BufferedImage img = new BufferedImage(pixelsPerPageX, minY, imgMode);
                   Graphics myGraphics = img.getGraphics();
                   myGraphics.setClip(0, 0, pixelsPerPageX, minY);
                   myGraphics.setColor(Color.WHITE);
                   myGraphics.fillRect(0, 0, pixelsPerPageX, minY);
                        java.awt.Rectangle rectangle=new java.awt.Rectangle(0,0,pixelsPerPageX, minY);
                   // call rootView.paint( myGraphics, rect ) to paint the whole image on myGraphics
                   rv.paint(myGraphics, rectangle);
                   try {
                        // write the image as a JPEG to the ByteArray so it can be printed
                        Iterator writers = ImageIO.getImageWritersByFormatName("jpeg");
                        ImageWriter writer = (ImageWriter) writers.next();
                                       // mod: Added the iwparam to create the highest quality image possible
                        ImageWriteParam iwparam = writer.getDefaultWriteParam();
                        iwparam.setCompressionMode(ImageWriteParam.MODE_EXPLICIT) ;
                        iwparam.setCompressionQuality(1.0f); // highest quality
                        ByteArrayOutputStream out = new ByteArrayOutputStream();
                        ImageOutputStream ios = ImageIO.createImageOutputStream(out);
                        writer.setOutput(ios);
                        // get the number of pages we need to print this image
                        int imageHeight = img.getHeight();
                        int numberOfPages = (int) Math.ceil(minY / (double) pixelsPerPageY);
                        // print each page
                        for (int i = 0; i < numberOfPages; i++) {
                             int startY = i * pixelsPerPageY;
                             // get a subimage which is exactly the size of one page
                             BufferedImage subImg = img.getSubimage(0, startY, pixelsPerPageX, Math.min(y - startY, pixelsPerPageY));
                                                 // mod: different .write() method to use the iwparam parameter with highest quality compression
                             writer.write(null, new IIOImage(subImg, null, null), iwparam);
                             SimpleDoc sd = new SimpleDoc(out.toByteArray(), DocFlavor.BYTE_ARRAY.JPEG, null);
                             printDocument(sd, ps);
                             // reset the ByteArray so we can start the next page
                             out.reset();
                   } catch (PrintException e) {
                        System.out.println("Error printing document.");
                        e.printStackTrace();
                        return false;
                   } catch (IOException e) {
                        System.out.println("Error creating ImageOutputStream or writing to it.");
                        e.printStackTrace();
                        return false;
                   // uncomment this code and comment out the 'try-catch' block above
                   // to print to a JFrame instead of to the printer
                   /*          JFrame jf = new JFrame();
                             PaintableJPanel jp = new PaintableJPanel();
                             jp.setImage( img );
                             JScrollPane jsp = new JScrollPane( jp );
                             jf.getContentPane().add( jsp );
                             Insets i = jf.getInsets();
                             jf.setBounds( 0, 0, newX, y );
                             jf.setDefaultCloseOperation( JFrame.DISPOSE_ON_CLOSE );
                             jf.setVisible( true );*/
                   return true;
              * Print the document to the specified PrintService.
              * This method cannot tell if the printing was successful. You must register
              * a PrintJobListener
              * @return false if no PrintService is selected in the dialog, true otherwise
              public boolean printDocument(Doc doc, PrintService ps) throws PrintException {
                   if (ps == null)
                   return false;
                   addAllPrintServiceAttributeListeners(ps);
                   DocPrintJob dpj = ps.createPrintJob();
                   addAllPrintJobListeners(dpj);
                   dpj.print(doc, attributes);
                   return true;
              public PrintService showPrintDialog() {
                   return ServiceUI.printDialog(gc, x, y, services, defaultService, flavor, attributes);
              private void addAllPrintServiceAttributeListeners(PrintService ps) {
                   // add all listeners that are currently added to this object
                   for (int i = 0; i < psalListeners.size(); i++) {
                   PrintServiceAttributeListener p = (PrintServiceAttributeListener) psalListeners.get(i);
                   ps.addPrintServiceAttributeListener(p);
              private void addAllPrintJobListeners(DocPrintJob dpj) {
                   // add all listeners that are currently added to this object
                   for (int i = 0; i < pjlListeners.size(); i++) {
                   PrintJobListener p = (PrintJobListener) pjlListeners.get(i);
                   dpj.addPrintJobListener(p);
              // uncomment this also to print to a JFrame instead of a printer
              /* protected class PaintableJPanel extends JPanel {
                   Image img;
                   protected PaintableJPanel() {
                        super();
                   public void setImage( Image i ) {
                        img = i;
                   public void paint( Graphics g ) {
                        g.drawImage( img, 0, 0, this );
    Thanks
    Ram

    Ram,
    I have had printing problems too a year and a half ago. I used all printing apis of java and I still find that it is something java lacks. Now basically you can try autosense. To check whether your printer is capable of printing the docflavor use this PrintServiceLookup.lookupPrintServices(flavor, aset); . If it lists the printer then he can print the document otherwise he can't. I guess that is why you get the error.
    Regards,
    Kevin

  • Can anybody out there help shed some light on why no audio output using varispeed tempo only

    Can anybody out there help shed some light on why no audio output using varispeed tempo only?
    I am using Logic Pro 9 and finding no problems using the tempo and pitch option but when I just want to vari the tempo only I loose all output.
    This includes no audio meter activity on channells.

    Another worthwhile time/pitch related product is from Prosoniq. The version of Nuendo (not the latest) the University uses ships with the MPEX algorithm, which is related to to their flagship product.
    http://www.prosoniq.com/www/TimeFactory_II.html
    I've used it a bit to create the double-time/+1 octave  Les Paul & Mary Ford guitar sound for a class demo demo and thought it did a very good job.
    Yes, there is a Demo.

  • How to use webdynpro abap? need separate software? or please help me.. :-)

    How to use webdynpro abap? need any separate software? if no, please help me with Transaction Codes..
    Thanks in Advance
    -Parthi
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on Oct 19, 2011 8:18 PM

    I don't think you quite understand how hibernation mode works.
    "The state of a computer is stored into its main memory, which is also called RAM. When a
    computer is powered off, the contents of this memory are irremediably wiped out. Hiberna-
    tion works in the following way: before being powered off, the computer saves all the con-
    tents of the memory to a file on the hard disk drive. On wake up, data stored in this file is
    read out and restored to the memory. Therefore, the RAM contents are the same before
    and after the hibernation process, and the state of the computer is also the same. The
    saved file is named sleepimage, and is located in the /private/var/vm directory. Hi-
    bernation is sometimes also called “software suspend” or “suspend to disk”.
    The default suspension feature of Mac OS X, called sleep works in a different way. When
    entering sleep, every subsystem of the computer is shut down, except the main memory
    which is still powered. This process preserves the contents of the memory, and allows the
    computer to wake up quickly. However, a sleeping computer still consumes a small
    amount of power. Sleep is sometimes also called “hardware suspend” or “suspend to
    RAM”.
    Apple introduced the safe sleep feature in Mac OS X 10.4.3 for the Powerbook HD line of
    laptops. This feature is a variation of the default suspension behavior. The main memory is
    still powered during the sleep, but the contents of the memory are also saved to the disk at
    the beginning of the operation. The saved file will only be used if the laptop runs out of bat-
    tery power while sleeping, in order to restore the original state of the computer.
    This safe sleep feature is what makes hibernation possible in Mac OS X 10.4.3 and above."
    Quoted from *Deep Sleep v. 0.7 documentation*
    Matthieu Beaumel, 10/03/2006

  • Output alignment in SMARTFORMS Output!!!! Need Help!!!!

    Hi All,
    The requirement is something like this...
    Consider i have an internal table with a fixed text field length of 30 characters!
    Line 1 of internal table: My name is Sundar   - 17 chars
    Line 2 of internal table: and my age is 26      - 16 chars
    Line 3 of internal table: and my native is Madurai  - 24 chars
    Line 4 of internal table: and I live in Singapore      - 23 chars
    Now my requirement is, while generating the output using smart forms... 
    I get the output something like this...
    My name is Sundar
    and my age is 26
    and my native is Madurai
    and I live in Singapore
    I want my output justified..
    Something like...
    My    name     is     Sundar(30 chars)
    and    my   age    is       26(30 chars)
    and  my  native  is Madurai(30 chars)
    and  I  live in       Singapore(30 chars)
    This looks justified and aligned!!!
    I want the output of each line of internal table to use all the 30 defined characters and spread.. irrespective of how many characters are there in each line!!!
    Hope am clear!!!!
    Condense removes all the spaces!!!
    But i want something like i illustrated above.. please help!!!
    Cheers,
    Sundar.

    Hi Sachin,
    Sorry... i've ammended my required output in BOLD!!!
    It is something like the "JUSTIFY" option in Microsoft Word!!!!
    When u type a para... and you press on justify... you'll see the output screen aligned right?
    Something similar!!!
    Thanks!!!!
    The requirement is something like this...
    Consider i have an internal table with a fixed text field length of 30 characters!
    Line 1 of internal table: My name is Sundar - 17 chars
    Line 2 of internal table: and my age is 26 - 16 chars
    Line 3 of internal table: and my native is Madurai - 24 chars
    Line 4 of internal table: and I live in Singapore - 23 chars
    Now my requirement is, while generating the output using smart forms...
    I get the output something like this...
    My name is Sundar
    and my age is 26
    and my native is Madurai
    and I live in Singapore
    I want my output justified..
    Something like...
    My    name     is     Sundar(30 chars)
    and   my    age    is       26(30 chars)
    and my   native is  Madurai(30 chars)
    and   I live    in    Singapore(30 chars)
    This looks justified and aligned!!!
    I want the output of each line of internal table to use all the 30 defined characters and spread.. irrespective of how many characters are there in each line!!!
    Hope am clear!!!!
    Condense removes all the spaces!!!
    But i want something like i illustrated above.. please help!!!
    Cheers,
    Sundar.

Maybe you are looking for