Outputting 5.1 Channel Surround Sound from your Mac

How to output 5.1 Channel Surround Sound from you Mac...

I have been using my MacBook Pro via HDMI into my pioneer av amp which is set up for 5.1.
I have been able to output 5.1 audio with Logic Pro and FCPX no issues at all after you setup the audio midi utility for 5.1. This setup is via PCM 5.1 audio not to be confused with Dolby 5.1.
It works great. If you want to play your edited exported movies from Final Cut Pro x in surround then it gets a bit tricky. I export the movie with FCPX as master video with the 5.1 audio then use HandBreak set to atv3 to encode / compress the video. This is great because handbreak folds the 5.1 into a stereo AAC track and also encodes the 5.1 mix into Dolby 5.1 AC3 track so both stereo and surround tracks are embedded in the movie file. So if you have an Apple TV it will play the movie with its surround track. If you play the same HandBreak compressed movie out of your Mac via hdmi to your surround amp it will only play the stereo track if you are using iTunes or QuickTime and I believe this is because of copy protect and Dolby license issues. iTunes will play a purchased movie from the itunes store in surround via your Macs hdmi to receiver setup but will only play the stereo track of the movie you exported from HandBreak even though it is set up just like an iTunes movie. To get your HandBreak movie to play in Dolby surround from your Mac all you need is VLC player, then you have to go in and select the Dolby track and the output in VLCs audio settings and bingo your HandBreaked movie then plays out of your Mac in Dolby surround. Once you set your Mac up for 5.1 mixing your amp will show your outputting 5.1 via the mac but again this is PCM audio 5.1 and apps like FCPX, Soundtrack Pro, Logic Pro will work.

Similar Messages

Audigy 4 (Non Pro) and center channel surround sound - from 2 channel aud

Hi all,?Is there a way to have voice coming from the center speaker during TV programs like you could using an external receiver with Pro Logic? I can't for the life of me, get my Audigy 4 to do this. I run MCE 2005 on a couple of machines in the house. On my other machine, with built in audio, I let the Purevideo decoder handle this and I get? a nice surround, complete with center channel voice on it while watching TV. On the machine with the Audigy 4, not only will it not give me the center channel while watching TV, but I can't get it to stop processing the sound so that I can simply use the decoding of the Purevideo Decoder... Stumped!?Thanks,?Stu

Hi all,?Is there a way to have voice coming from the center speaker during TV programs like you could using an external receiver with Pro Logic? I can't for the life of me, get my Audigy 4 to do this. I run MCE 2005 on a couple of machines in the house. On my other machine, with built in audio, I let the Purevideo decoder handle this and I get? a nice surround, complete with center channel voice on it while watching TV. On the machine with the Audigy 4, not only will it not give me the center channel while watching TV, but I can't get it to stop processing the sound so that I can simply use the decoding of the Purevideo Decoder... Stumped!?Thanks,?Stu

True 5.1 surround sound from headphone port over a Toslink cable?

http://support.apple.com/kb/SP690 page regarding the headphone port simply says: "Support for audio line out (digital/analog)". So, in planning a purchase I have the following 2 questions:
1. Does the newly released 15" MacBook Pro w/ Retina display have the ability to output true 5.1 surround sound or is it only able to output simulated surround sound? In other words, does the newest MacBook Pro decode the 5.1 signal (separate outputs front center, fronts, rears and subwoofer) over a Toslink cable pluged into the side headphone jack?
2. Using the above confuguration will the new MacBook Pro be able to play true 5.1 surround sound on HD movies purchased or rented from iTunes?

Probably: http://osx411.com/index.php?/topic/38-hook-your-macbook-pro-up-to-your-surround- system/

Mac mini 2014 won't do 5.1 surround sound from HDMI port

I can't seem to get my Mac mini 2014 to do 5.1 surround sound from the built-in HDMI port to my home theatre system. When I run the Audio MIDI Setup program the only option is 2ch-24bit (stereo). Now I didn't have this issue when I tested it with a Mac mini 2012 running 10.9.5. It allow me to select 6ch-24bit (5.1) and Encoded Digital Audio. I also don't have an issue with the Mac mini 2014 if I use a Belkin Mini DisplayPort to HDMI Adapter connected to one of the Thunderbolt 2 ports. It does 5.1 surround sound just fine. So is there something wrong with the built-in HDMI port on the Mac mini 2014 or OS X 10.10?

Hello mrbraindead,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having problems with your VLC audio since updating to Windows 8.1. I am providing you with a link to a thread I found on en.Kioskea.net titled VLC video player suddenly has no sound. There are numerous solutions provided here which is why I am providing you with the link. I would review the posters solutions and ensure that you have checked all the suggestions they make.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

How do you eject speakers properly from your mac?

How do you eject speakers properly from your mac?

speakers (3.5 mm out) do not matter how they are removed, just unplug them and you will be fine
when this happens, Mac Core Audio (you dont need to know about it, but an important part) will look for another output device, and your internal speakers are likely to start playing
if you use USB or FireWire speakers, there is a possibiliy that they use some sort of strange arbitrary driver
in that case, go to system preferences> sound> output> and select something else than the speakers in question.
then you should be able to unplug at will.

When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
If I use google it works. If I use Ichat, it works. If I use skype it works.

This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

When I open a music in itunes got a message "connecting to apple tv" and got no sound from my mac

When I open a music in itunes got a message "connecting to apple tv" and got no sound from my mac.

AirPlay isn't anything to do with homesharing. (Home sharing lets you share the iTunes libraries on computers)
Basic AirPlay: Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
Mirroring: When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Restart your mobile device.

How do you uninstall creative cloud completely from your mac?

ok so i seriously need help. so i was playing with photoshop about a month ago and i messed up all the settings so i got rid of it. (i didnt even have it for a whole day.) then, i wanted it again, so somehow i got it. but then smart me deleted it again because i made the same mistake. but i really want it back to use "a full 30 day trial" because i only had a chance to try it out for 8 hours before messing it up. so today, i made a new adobe account. and i cant get it back because that creative cloud is still on my mac. i tried everything to get rid of it and it literally wont work and i really want it back. PLEASE help

Hi
You can try below steps to remove Creative Cloud completely from your MAC.
1: Navigate to : Application/Utility/Adobe Installer
2: Double-click an Adobe CC product to uninstall one by one.
3: Follow on-screen instructions.
4: Download and run Adobe Cleaner tool using below link.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
5: If you don't have any Adobe product installed on your computer, you can manually remove Adobe folders from below location.
* Library/Application Support/Adobe
* Mac HD/Users/<user account>/Library/Application Support/Adobe
6: Restart the computer once.

TS2570 Question re: "Start from your Mac OS X Install disc; use Disk Utility"

I've worked my way through the step-by-step trouble shooting in the TS2570 article up to "Start from your Mac OS X Install disc; use Disk Utility". So far, every step results in the same outcome - my formerly trusty 2007 Intel duo core iMac (24") will not start up, freezing on a grey screen with a blinking question mark on a folder. I don't completely understand this next step. I have both a Leopard and a Snow Leopard disc. I'm not positive whether these were for the iMac, or my old Macbook Pro. I assume this makes a difference.

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Import photos and videos from your Mac to your iPhone

How do you import photos from your Mac to your iPhone? Preferably using iPhoto.

You can use iTunes to sync photos from iPhoto to the iPhone. iTunes: Syncing photos - Apple Support
Other methods include Photo Stream and 3rd party apps such as PhotoSync.

Hosting Your iWeb Site From Your Mac

If you don't have a .Mac account or you don't want to pay a monthly fee to host your new website you created with iWeb, you can use OS X's built-in Apache Web server. To accomplish this, follow the steps in the link below.
Hosting Your iWeb Site From Your Mac >>
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
 An Apple User Group 
MacOSG Podcast >>
Disclaimer required by Apple Discussions Terms of Use: MacOSG - a non-profit Apple User Group - may receive some form of compensation, financial or otherwise, from my recommendation or link.

I was able to get this to work, using the same configuration you mention. The way I did it was to set up the IP address on my LAN using fixed static addresses, and to have the router "forward" the http packets to the Mac running Apache. In Network system preferences panel, you also need to set the DNS servers address to the address of the router on the LAN. In order to reduce hackers trying to break in, I don't use the standard port 80 for my address, but use some other 4-digit port (e.g., 8182), so my website address ends up looking like www.whatever:8182. Instead of "no-IP.com" I used the free dynamic name service from http://www.dyndns.com/. I also put the web content on a firewire disk, which requires a little editing of the httpd.conf file. This was another security precaution. Anyhow, its been working great -- not a single problem. Also, Weblock is great shareware that lets you assign login IDs on the web folders.

Can you delete a text messages from your mac Book OSX 10.9.2 and not delete them from your iphone 5 running version 7.0.4

c
an you delete a text messages from your mac Book OSX 10.9.2 and not delete them from your iphone 5 running version 7.0.4

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Also consider deleting and reinstalling the Mail Account in question.

Does anybody knows how to get sound from my Mac Mini into my Bose Lifestyle V35?

Hi, I am trying to get sound from my Mac Mini into my Bose Lifestyle V35...I get perfect image but no sound... any idea? Thanks

You don't mention which version of Mac Mini that you have. Here is some info from Apple.

How do you delete photos from your iPad without deleting them from your Mac or iCloud?

How do you delete photos from your iPad without deleting them from your Mac or iCloud?

in iPad to Delete a photo or video: Tap trash icon. If you don’t see trash icon, tap the screen to display the controls.
If they were added from your computer, you need to Sync and uncheck them and then sync again...
Ipad User Guide Page 61
http://manuals.info.apple.com/en_US/ipad_2_user_guide.pdf

HT5538 how to you facetime your iPad from your mac probook

when I try to face time my I phone from my mac pro book it says call failed. How do you do this and how do you face time your ipad from your mac pro book

Troubleshooting articles:
FaceTime Troubleshooting
FaceTime Troubleshooting
FaceTime Troubleshooting (2)
FaceTime Troubleshooting (3)
FaceTime Troubleshooting (4)
FaceTime Troubleshooting (5)

Outputting 5.1 Channel Surround Sound from your Mac

Similar Messages

Maybe you are looking for