Outputting a 16/9 sequence to tape for lab work

Hi to all,
this is probably going to sound like an awfully stupid question to most of you. But i need to find the answer before morning, so your help is greatly appreciated.
I need to output a 16/9 sequence to DVCAM. it is being sent to a lab tomorrow for color correction, mastering and encoding.
The lab specifically needs the footage on tape.
My first intuition was to export to tape the 720x576 quicktime movie. The frame size would be the original captured size, and then would be flagged as anamorphic at the lab.
Or should i output as a letterboxed 4/3 film.
see what i mean?
thanks for your help.
tee.

That seems to make a lot of sense!
thanks Jerry.
tee

Similar Messages

  • Radius server for lab work

    I am studying Routing & Switching, but I also need to have a general understanding of the security features: AAA authentication, dot1x etc. It is probably the weakest link in my chain of knowledge because I have never used those
    features.
    I really need to play with the protocols in the lab to get a basic understanding of them. Is there some cut-down Radius server, preferably freeware running on a PC, that can be used for basic lab work? Can someone guide me through obtaining and installing it?
    Kevin Dorrell
    Luxembourg

    Hi Kevin
    You should be able to get an eval license for Cisco's Secure ACS that you could use in the lab. It is free for download on the Cisco site.
    It does run out after 3 months so it depends on how long you need it for.
    The other option is to use the Microsoft Radius server (IAS) which comes with the W2K Advanced server. I haven't used it so i can't really comment other than that.
    HTH
    Jon

  • Output 23.98 to 29.97 tape with correct 3:2 pulldown

    I need to output a film project to DVcam tape for an online session . I've been advised that FCP won't put a proper 2:3:2:3 pull-down on 24 f projects so I've used Cinema Tools to convert to 23.98.
    However, even with verifying all of my settings, such as the pull-down, and "use playback settings" for edit to tape (or print to video) - and then testing every other imaginable way, the tapes always have "hold" or duplicate frames, instead of blended BC CD frames. So reversing actually creates blended frames.
    Has anyone experienced this with the new software or hardware or OS? I've got to deliver a tape tomorrow and nothing is working. I've successfully done this in the past using FCP 5.0 from a native 23.98 project so I compared the tapes and this is definitely not using the 3:2 pull-down.
    Any information is greatly appreciated. Thank you.
    Karen
    Power PC G5 dual 2 GHz   Mac OS X (10.4.8)   FCP 5.1.2

    I don't suppose you have Shake? It'd be easy to insert a proper pulldown then and create a 29.97 sequence...
    Another solution is Nattress standards converter... it will also insert a proper pulldown and it's only $99 bucks.
    I mean FCP should work - and it has worked for me in the past...
    The only other thing I can think of is to import your 23.98 quicktime into DVDSP, then burn a dvd and lay that off to tape. A DVD player will insert the pulldown on playback...
    Patrick

  • Outputting timecode from timeline to tape for broadcast

    I need to output to tape for broadcast using specific timecode set up in the sequence from the timeline. Looking at previous posts on the subject it looks like you cannot do it, although someone says there is a workaround for a DSR11, which is the deck I use. I also have a sony DSR50 I use for recording from a Polecam if that makes a difference, although I can't see it would. I need to start the timecode from 09:58:00:00, running bars and tone and info/countdown clock etc to start the film at a timecode of 10:00:00:00 (Pal European Broadcast). Anybody have any idea of it can be done and how exactly to do it?

    Now that is very helpful... had to go and search for the remote I'd never even looked at.... and I didn't even know it had a set-up menu!
    However, having now set it to external TC, and tested it with a bit of video from the timeline, it does not seem to record ANY timecode at all. Instructions say the unit "records the timecode with video and audio signals input from the DV IN/OUT connector".... but I am recording using firewire. I don't have an option to record from the computer using DV in, so I'm guessing I'm stuffed?

  • 24fps output to tape doesn't work

    I have a 24fps sequence (which I'm outputting to film) and want to output it to DV tape. But when I print to tape, or even playback the sequence with my deck recording it, only the first image appears, with no movement. I'm using a Sony DVCAM DSR-11 deck via firewire.
    How can I print my sequence to tape?
    thanks
    Scott

    Studio X wrote:
    No, not the aspect ratio, it is the FRAME SIZE.
    As noted, standard DV video (whether 4:3 or 16:9 anamorphic) is 720 pixels wide x 480 pixels tall. This is what your device at the end of the firewire cable is expecting.
    Ah, of course, makes sense.
    I suspect the frame rate has something to do with it as well. I exported the sequence as a QT movie and reimported it into a 720x480 sequence at 24fps; it still wouldn't output. I then imported it into a 720x480 sequence at the DV frame rate and it did output (although adding a lot of extra frames of course).
    Thank you all for your excellent advice.
    Scott

  • Sequence settings / codec for cutting iPhone material

    Anyone know what settings a sequence should have for cutting video shot on an iPhone? Is the iPhone shooting NTSC (I'm assuming that's the case because if I change the settings to PAL it all needs rendering, which has a noticeable jitter after rendering)?
    The audio is at 44.1. I need to output to a PAL DVD ultimately.

    H264 video is not recommended for editing and that is most likely what your phone files are.
    Convert your iPhone files to ProRes in Compressor. You can edit in a 640x480(360-16x9) sequence and then convert to PAL when you are done.
    You will blowing up your video because the files are smaller(pixel wise) than PAL video and have less lines(525).
    You can try compressor for the format conversion but Natress will do a much better job in my opinion.

  • Ensure field sequence is correct for data for mutiple source structure

    Hi,
    I'm using LSMW with IDOC message type 'FIDCC2' Basic type 'FIDCCP02'.
    I'm getting error that packed fields are not permitted.
    I'm getting Ensure field sequence is correct for data for mutiple source structures.
    Source Structures
           HEADER_STRUCT            G/L  Account Document Header
               LINE_STRUCT              G/L Account Document Line
    Source Fields
           HEADER_STRUCT             G/L  Account Document Header
               BKTXT                          C(025)    Document  Header Text
               BLART                          C(002)    Document Type
               BLDAT                          DYMD(008) Document Date
               BUDAT                          DYMD(008) Posting Date
               KURSF                          C(009)    Exchange rate
               WAERS                          C(005)    Currency
               WWERT                          DYMD(008) Translation Date
               XBLNR                          C(016)    Reference
               LINE_STRUCT               G/L Account Document Line
                   AUFNR                          C(012)    Order
                   HKONT                          C(010)    G/L Account
                   KOSTL                          C(010)    Cost Center
                   MEINS                          C(003)    Base Unit of Measure
                   MENGE                          C(013)    Quantity
                   PRCTR                          C(010)    Profit Center
                   SGTXT                          C(050)    Text
                   SHKZG                          C(001)    Debit/Credit Ind.
                   WRBTR                          AMT3(013) Amount
    I have changed PAC3 field for caracters fields of same length to avoid erreur message of no packed fields allowed.
    Structure Relations
           E1FIKPF FI Document Header (BKPF)         <<<< HEADER_STRUCT G/L  Account Document Header
                   Select Target Structure E1FIKPF .
               E1FISEG FI Document Item (BSEG)          <<<< LINE_STRUCT   G/L Account Document Line
                   E1FISE2 FI Document Item, Second Part of E1FISEG   (BSEG)
                   E1FINBU FI Subsidiary Ledger (FI-AP-AR) (BSEG)
               E1FISEC CPD Customer/Vendor  (BSEC)
               E1FISET FI Tax Data (BSET)
               E1FIXWT Extended Withholding Tax (WITH_ITEM)
    Files
           Legacy Data          On the PC (Frontend)
               File to read GL Account info   c:\GL_Account.txt
                                              Data for Multiple Source Structures (Sequential Files)
                                              Separator Tabulator
                                              Field Names at Start of File
                                              Field Order Matches Source Structure Definition
                                              With Record End Indicator (Text File)
                                              Code Page ASCII
           Legacy Data          On the R/3 server (application server)
           Imported Data        File for Imported Data (Application Server)
               Imported Data                  c:\SYNERGO_CREATE_LCNA_FI_GLDOC_CREATE.lsmw.read
           Converted Data       File for Converted Data (Application Server)
               Converted Data                 c:\SYNERGO_LCNA_FI_GLDOC_CREATE.lsmw.conv
           Wildcard Value       Value for Wildcard '*' in File Name
    Source Structures and Files
           HEADER_STRUCT G/L  Account Document Header
                         File to read GL Account info c:\GL_Account.txt
               LINE_STRUCT G/L Account Document Line
                           File to read GL Account info c:\GL_Account.txt
    File content:
    Document  Header Text     Document Type     Document Date     Posting Date     Exchange rate     Currency     Translation Date     Reference     
    G/L Account document     SA     20080401     20080409     1.05     CAD     20080409     Reference     
    Order     G/L Account     Cost Center     Base Unit of Measure     Quantity     Profit Center     Text     Debit/Credit Ind.     Amount
         44000022                    1040     Line item text 1     H     250
         60105M01     13431     TO     10          Line item text 2     S     150
    800000     60105M01                         Line item text 3     S     100
         60110P01     6617     H     40          Line item text 4     S     600
         44000022                    ACIBRAM     Line item text 5     H     600
    The file structure is as follow
    Header titles
    Header info
    Line titles
    Line1 info
    Line2 info
    Line3 info
    Line4 info
    Line5 info
    Could someone direct me in the wright direction?
    Thank you in advance!
    Curtis

    Hi,
    Thank you so much for yout reply.
    For example
    i have VBAK(Heder structure)
              VBAP( Item Structure)
    My file should be like this i think
    Identification content         Fieldnames
         H                               VBELN      ERDAT     ERNAM        
                                          Fieldvalues for header
          H                              1000          20080703   swapna
    Identification content         Fieldnames
        I                                   VBELP     AUART 
                                          Fieldvalues for item
        I                                  001             OR
                                           002             OR
    Is this format is correct.
    Let me know whether i am correct or not

  • TS3367 When trying to use FaceTime I can't because it says it is turned off in settings, it then ask do I want to turn it on , tap for yes and it sits there spinning. Face time is on in settings?

    When trying to use FaceTime I can't because it says it is turned off in settings, it then ask do I want to turn it on , tap for yes and it sits there spinning. Face time is on in settings?

    Have you tried signing out of your Apple ID, restart the iPad and then start all over again?
    Go to Settings>iTunes & App Stores>Apple ID. Tap the ID and sign out. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Then go back to Settings>iTunes & App Stores>Apple ID. Sign in again. Then go to Settings>FaceTime>On. See if it will stay turned on and it it does, sign in and setup.

  • Creation of sequence and trigger for each table!!!!!!!1

    Hi
    I am new to trigger and Sequence field. In one of my database we have many tables with fields for specifing ID numbers. Iam planning to insert the ID field with help of a Sequence and trigger...that trigger fires by adding the sequence value from the dual table. Now the point is here we r having around *60* table with ID field. And i am planning use the above process for each table by creating sequences and trigger for each table.
    Will this affects the performance of database.
    Is there any other option other than the above process, I mean other than creating sequences and trigger for each table.
    PLzz help to resolve this issuee......
    Shiyas
    Edited by: user13170361 on Jun 7, 2010 12:37 AM

    Tiger, I didn't mind about your comment, but the point is try to use
    select NVL(max(a) + 1,1) into i from p1_temp;This line in your trigger code and see what is happening. The problem is with your trigger. You are using group by function and you will not get no_data_found !
    For more help, this is some modification of your code.
    SQL> create table p1_temp (a number(10) primary key, b number(10));
    Table created.
    SQL> create or replace trigger trg_p1_temp
      2  before insert on p1_temp for each row
      3  declare
      4  i number(10);
      5  begin
      6  begin
      7  select NVL(max(a) + 1,1) into i from p1_temp;
      8  exception
      9  when no_data_found then
    10  i := 1;
    11  end;
    12  :new.a := i;
    13  end;
    14  /
    Trigger created.
    SQL> insert into p1_temp(b) values (1);
    1 row created.
    SQL> insert into p1_temp(b) values (2);
    1 row created.
    SQL> commit;
    Commit complete.
    SQL> select * from p1_temp;
             A          B
             1          1
             2          2
    SQL> Edited by: Saubhik on Jun 7, 2010 2:30 AM

  • When I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

    when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

    Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
    ''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.''

  • Mouse tapping for old macbook under bootcamp

    i know that the new macbooks have no click button at all and is able to have tapping for clicks. i am wondering if this is possible for the older generation macbooks with button? a patch of some sort? thanks

    Nope, it's one of the oldest feedback items for Bootcamp...no tap to click yet on the Windows side.

  • Sequence Aspect Ratio for HD

    I am transferring HD video from AVCHD into FCP 6.0.4, and I need to know what the correct setting is for the aspect ratio (in the sequence preset editor). The footage is captured 1920x1080 at 30p. I plug that all in, but the only choice for plain HD at 16:9 is at 1440x1080. If I want to select 16:9 it's called HDTV 1080i???
    Can someone help me understand why there is not a setting for HD 1920x1080 in that window? Is it normal for me to have to select 1440x1080? Even though all the other settings are at 1920x1080???
    Also, do i have to check anamorphic 16:9?
    Thanks in advance!

    I'm sorry, I'm a bit confused.
    this time I set up my session/sequence to be for 1440x1080, transferred the media into the session. When I drag my first clip into the Canvas - the FCP pops up a window saying that the clip and the sequence don't match. I tell it to correct it - and it puts it back to the 1920x1080 - HDTV 1080i setting.
    What am I doing wrong? Should I be converting it differently?
    And which is correct - anamorphic or no???
    Thanks

  • Spanning 8mm tapes for a large archive

    I am looking for some insight on how to span tapes for very large archives. I am using Solaris 8. The tape drive commands seem very limited as do the error messages returned upon a failure.

    Christa,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • How to use output of one query as an input for another

    Hi Gurus,
    can you give me any links on how to use an output of one query as an input for another (preferably if this can be done in a dynamic/on the fly way)?
    thanks

    You can use Replacement Path Variable for this purpose. See this detailed documentation.
    http://help.sap.com/saphelp_nw04s/helpdata/en/bd/589b3c494d8e15e10000000a114084/content.htm
    Abhijit
    Edited by: ABHIJIT TEMBHEKAR on Nov 19, 2008 9:48 AM

  • I would like to know the list of possible output (export) file codec from FCP X. For example, can I export  in F4V or FLV format?

    I would like to know the list of possible output (export) file codec from FCP X.  For example, can I export  in FLV format?  Where do I find the list, which gives me all the details about it?  Or is there only one output codec? Thanks

    That's an excellent analogy. While FCP cannot export FLV. It is possible to do a very simple substitution. If you export a QuickTime movie using the .mov suffix with the H.264 codec, you can change it to FLV simply by changing the suffix to .flv. This is an acceptable format for Flash movies on most web sites, if that's where you're trying to go.

Maybe you are looking for

  • Mac Mini problems

    I received my Mac Mini yesterday and have come across a host of problems. Some are probably due to my setup, while others are probably due to the Mac itself. I'd appreciate help in solving some of these. In order of "most important" to "least importa

  • Why does 44k and 88k look different?

    hi, ive been using some 88k files for high qual recording, now i want all my files at 44k, so i convert them all, but looking the wave overview the 'level' appears to have dropped to nearly 50% of what it was for each file. is this just a visual arte

  • Oracle 8i Java.exe error

    Hello. I have installed Oracle 8i on Windows 2000 Pro. At Start up I receive an error message that requires debugging. The error has been the Java.exe in c:\orant\appache\jdk\bin\java.exe. I was wandering how I might be able to correct this problem.

  • Credit for damages

    Hi, When an Item is damaged in transit during vendor delivery, the vendor needs to refund for the damaged item. Hence the item was completely damaged the vendor says dont return the item but will issue the credit. I would like to know how to process

  • Process Order Confirmation COR6N - By using Shift Management Functionality

    Hi, I want to confirm Operations/Phases by using T.Code COR6N. Here i want to identify which Shift i have done confirmation by using shift management functionality. It can be done for CORK. While doing Cofirmation for Order by using CORK, we can use