Outstanding in vendor even though payment made
Dear Experts,
We have an issue. All the vendor invoices pertaining to particular site (business area) are paid. There are not outstanding payments to be made. The payment was made without specifying Business Area. In vendor line item display there is a balance even though vendor is paid. The payment document also has a clearing document. The outstanding displayed in vendor is the total of the payment documents generated without Business Area. I am confused. How clearing is done against this and how clearing document is generated without clearing the line items?
Anyway how can this amount be cleared on vendor? Please guide.
Regards
Komal
Hi,
Please check how the payment has been done, through which t.code....because it varies if it was done as a F-44 Vendor clearing. In that case a AB document will get generated as open item it the user donesn't properly do the clearing.
Check what is the document type the system has generated and also check do this vendor has any advance, go to FBL1N and give the vendor and dont select special GL under normal items .
Similar Messages
-
Vendor Invoice paid - even though Payment Block set to "A"
Hello,
I have encountered the following situation:
Late Nov 2010 - invoice created for a vendor
Early Dec 2010 - payment block on line items in accounting document set to "A" in t-code FB02
Late Dec 2010 - payment was made to the vendor, even though payment block of "A" set on the document
How can payment to a vendor be made on this document if the payment block is set to "A"? Can this be over-ridden manually by the user? Any help would be greatly appreciated.Hi,
Go to transaction OB27 and restrict for manual payment and change of payment block in payment run.
Regards,
Gaurav -
How to unblock the payment to the vendor , even though the lot will be get
Hi,
we receive the material from vendor . when store people unloaded, it was get broken.
so quality will reject the lot for the reason. but if we reject vendor will not get the payment
since this is not the vendor mistake. he expect for the payment.
how to unblock the payment to the vendor , even though the lot will be get reject .Hi
Can you not make UD code as Partially accepted.
Put OK material in Unrestricted
For NOT oK material put into block stock.
From Block stock you can move to QRNT (Quarantine storage Location - 311 mvt type) or directly move to Unrestricted(mvt type 343)
Form here you can move material to Scrap by 551
This will give payment to vendor & Qty can be scrapped. -
Order being Blocked even if payment being made via financial document
A customer has credit limit 0 and recievables in 3.5 million.
The customer always makes order via LC and all his sales orders are processed with a financial document being attached.
An order is made and financial document which is being attached with 30 day credit payment term but the order is being blocked once i save it and a warning message comes up saying that static credit limit has exceded 3.5 Million.
the order gets blocked even though payment has been made via FD (LC).
Kindly help,
RegardsHello,
There is also a possibility that sales order value exceeds the maximum document value.
Check the maximum document value permitted for the customer.
Transaction - OVA8 - View for maintenance of Automatic Credit Control.
Regards
Gowri Shankar -
How PIR's are consumed by the customer requirements even though the sales orders are blocked?
Dear experts,
I am using strategy 40 for material A with Backward/Forward consumption of 60 days backward and 60 days forward.
My PIR is as follows :-
Material Month #1 Month #2 Month #3 Month #4 Month #5 ....
material A 100 100 100 100 100 ....
I created a Sales Order for material A with the quantity of 600 in Day 4 of Month #1.
After MRP run, planned order conversion and production order has been completed.
Month #1, Month #2 and Month #3 PIR's are consumed even though we made the setting in Such a way that the sales orders should just display but not planned . and the sales orders are into the blocked requirements list in the result of /n/afs/MD02.
1)but why it is consuming the PIRS?
2)is there any affect of backward and forward consumption on this?
Thanks in advance.
Regards
Bhargavi DesaiHi,
Normally it is recommended that, not to delete PIR's one by one or remove quantity from previous periods/ requirement manually. If the PIR's of previous month is not consumed it is normally a feedback to sales people to do a analysis at their end.
In PP point of view, normally a re-organization run is carried out by MD74, MD75 or MD76. The same can be done by scheduling batch job to run on month ends basis w.r.t. period you specify.
Regards,
Narresh -
I tryed to log into my id so I can download apps but I had to put my bank details in and even though I was just signing in it said I had to use a diffrent payment option even though it was all right, I need help with what to do
Hi connor00015,
In order to access the iTunes Store, even for free apps, the billing information associated with the account must be up to date and correct. If you are being prompted to correct or update your billing information, you may find the following article helpful:
iTunes Store: Changing your payment information
http://support.apple.com/kb/ht1918
Regards,
- Brenden -
Steps to cancle Purchase order after down payment made to vendor ?
Dear Group members
Warm greetings !!!!!!
One of my user made down payment to vendor on the base of Purchase order issued, now the vendor is not able to supply the goods & finally (Returned) refunded the amount & canceled the PO
How can i process this in SAP
As in Purchase order, history for Down payment is reflected. Transaction code ME23n
Finance don't want to reveres the down payment made which is made in the month of Jan & cleared from bank a/c
Pleas advice some me with some other solution
Thanks & regards IN advance
Regards
Shamul heqHi ,
Clear the advance payment made with the incoming payment from Vendor. this wil make the down payment at PO level Zero you can close the PO after that..
try out the same in test system and move to production after that.
rgds
Murali -
Including down payment made to vendor in the internal order
Hi all
My requirement is like this.
We use IM and IO(Capex orders) for procuring and capitalising assets. We are able to assign all the costs of procuring assets (both APC and incidental expenses to the internal order). We use purchase orders and assign the internal order while raising purchase order.
Sometimes we do make Down payments(advances) without raising purchase orders. My question is how to include this down payment made in the internal order. We cannot assign any internal order while making the down payment. But, can we include this down payment made to vendor in the internal order(commitment) while making down payment or after that.
FYI:I came to know that there is some functionality in Controlling (Project systems) where we can assign the down payment made to the internal order after making payment.But, i do not know how to do that.
Pls somebody reply me.
Thank you very much in advance.
Regards,
Vishnu
VST-IT.
Pls somebody answer my query.The functionality is available in Controlling. I dont know about PS.
I need to know how to do it.
Regards
vishnu
Pls anybody suggest me on this issue. -
Table for Year to date payments made to vendors
Hi friends,
I am generating one query, in which I have to show year to date payments made to vendors.
can anyone tell me from which table and from which foield can I get this information.
Please help.hi,
GO to SE16 and select doc type wise , you will get a solution .
i hope it helps you.
regds,
raman -
My apple Id is already in use even though I never made one before
So I just got an iPhone yesterday , to make an apple ID I used my email address.
It told me the email is already in use , even though I never made an apple ID before but anyway it told me to change the password for it ,
So I went and did that but it seemed like somebody else had been already using my email address as their apple ID because when I went into manage account , firstly the name was totally different , the address was Canada's and a phone number was there too and security questions were asked in French.
Now that sort of freaked me out, has someone hacked my email address or what ? And why would they use my email address as their apple ID why couldn't they use their own ? This seems very dodgy someone please explain if they know anything thanks...
Btw I didn't change any information on the account yet just Incase I had to report it to apple ( and I'm still not able to use it as my apple ID)disable the account completely and start from scratch. simple.
http://www.apple.com/support/appleid/ for more info -
I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You
I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.
-
I have made a website using iweb, as this will no longer be supported by apple, does that mean the gallery I have created on my website will no longer work even though I am hosting it with a different hosting provider. Will the other widgets no longer work?
There are a few things that won't work on other hosting sites; hit counters and pop-up slide shows for sure.
See http://oldtoadstutorials.net/No.iW11.html for more info, and/or the iWeb forum at https://discussions.apple.com/community/ilife/iweb -
In Windows 7, Firefox 8.0 does not ask to save passwords, and does not save, them, even though I checked the box to save passwords. I have confirmed that clearing history is not on and that I am not in Private Browsing. This is so frustrating, it almost makes me want to go back to Vista. I have looked at all the suggestions to fix the problem in "Help" and have followed the suggestions, and none of them help.
I have the TX2 1012NR and its can upgrade just fine! Here is a few recommendations "only if u have the HP Upgrade program disks"
If you have them you can install a clean copy and delete everything... Do not use the use me first disk included because it prompts you to install an older BIOS.... Just use the windows 7 upgrade disk and start the process. The clean install clears your entire drive but does not void your warranty! When you use the use me first disk after the install it actually loads everything else needed to get you up in running. The touchscreen driver and the HP Mediasmart programs will have to be downloaded from the HP support site. Once again its recommended that if there were any programs installed delete them do not try to update them! This causes issues and countless errors. Specifically with touchscreen drivers etc uninstall them before installing the ones from HP support. I found this was not the easy way to do it but the best way... I also recommend that when doing any sort of BIOS update that you remove your Battery and leave it connected to a power cord only! Last but not least if you really mess up and its under warranty... Send it to HP they will set it back up to factory defaults under Windows Vista with the more up to date BIOS installed. I hope my information helps! Sure you might loose some programs but in the end your computer runs faster and smoother because all the programs installed are made for Windows 7.... Also they did release the Touch Pack for download from the Microsoft website here is a link telling more about the features and benefits and how to get it as it is a totally free download...
http://windowsteamblog.com/windows/b/windows7/archive/2009/05/27/introducing-the-microsoft-touch-pac...
Microsoft Link for download:
http://www.microsoft.com/downloads/details.aspx?FamilyID=b152fadd-82e4-4ddb-a46a-aebe49944428&displa... -
When I got my ipod I made an account with iTunes right from my ipod.Yesterday, I made a password lock to get into my ipod and I couldn't get into it even though I did the correct one. Now it says"connect to iTunes" BUT I can't because I never registered on the computer. I've tried holding the home and sleep/wake button for 10 sec and then only the home for 5sec and that might have reset it, but it didn't help. If any of you guys know what to do so I can unlock it I would appreciate it VERY much.
If you haven't done so install iTunes on your computer. http://www.apple.com/itunes/
Follow the instructions here: iPhone and iPod touch: Unable to update or restore -
My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?
I don't get what you are saying.
Is this all the same document?
What version of Pages?
Have you tried to revert to a previous version?
Peter
Maybe you are looking for
-
Final Cut Pro finished project looks good in FC but when I export The slugs appear as a Red screen any ideas?
-
Using sql expressions in interfaces
Hi All, I have created an interface that works very fine when used with constants. But when i am using a sql case expression for populating a target column, the target column value is updated as null. The expression that i have written is: CASE WHEN
-
Pre Plus Mobile Hotspot laptop connection issues
Hello All. I think this is a duplicate post because I hit enter accidentally! Sorry. I am having a problem connecting my laptop to the internet using Mobile Hotspot through VzW. I have activated the feature on VzW, have the software loaded on my Pr
-
Help with Subaccounts Where Email is Linked to Yahoo
I have been a Verizon customer for several years, and have always had my Verizon email linked to Yahoo. At one point, I created a subaccount for my spouse, which she uses as her primary, personal email address. I attempted today to create an additi
-
Explanation of Edge Detection of Digital Images
Can anyone suggest the best links for the complete explanation of doing edge detection using java.