OVD: Performance Monitor Plug-In

Hey Everyone,
I need help getting the Performance Monitor plug-in working for OVD. I followed the instructions found in metalink document 472759.1 and in the OVD manual, but still no luck. I must be missing something. I have tried using the adapter globally and just on a specific adapter.
The steps I follow are:
1. Select a specific adapter.
2. Under Plug-in/Mapping Configuration click New Plug-in
3. Click "Select from Server..."
4. Select the "Performance Monitor" option
5. Leave Parameters blank and click Next.
6. Leave the Namespace blank and click Finished.
7. Save settings to the server.
8. Perform a search on the adapter with a filter of “vdeSearchtime=*”
I get nothing back. Am I doing something incorrectly or missing a step?
Thanks,
Stephen

I was having same response. Then I tried to execute the search directly in OVD Manager and it returned results.

Similar Messages

BEA weblogic 8.1 performance monitor plug-in doesn't work

downloaded bea performance monitor and added to the startserver.sh
"%JAVA_HOME%\bin\java" %JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -Dweblogic.Name=%SERVER_NAME%
-Dweblogic.management.username=%WLS_USER% -Dweblogic.management.password=%WLS_PW%
-Dweblogic.ProductionModeEnabled=%PRODUCTION_MODE%
-Djava.security.policy="%WL_HOME%\server\lib\weblogic.policy" weblogic.Server
-Dweblogic.classloader.preprocessor=com.dirig.preprocessor.DirigBEAClassProcessor
ENDLOCAL
weblogic81 is not starting as it is not finding the class 'DirigBEAClassProcessor'.
I searched for this class in the dir where i installed beaplugin but don't find
it

Make sure to add dirig.jar in WEBLOGIC_CLASSPATH.
Doug
"tim" <[email protected]> wrote:
>
downloaded bea performance monitor and added to the startserver.sh
"%JAVA_HOME%\bin\java" %JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -Dweblogic.Name=%SERVER_NAME%
-Dweblogic.management.username=%WLS_USER% -Dweblogic.management.password=%WLS_PW%
-Dweblogic.ProductionModeEnabled=%PRODUCTION_MODE%
-Djava.security.policy="%WL_HOME%\server\lib\weblogic.policy" weblogic.Server
-Dweblogic.classloader.preprocessor=com.dirig.preprocessor.DirigBEAClassProcessor
ENDLOCAL
weblogic81 is not starting as it is not finding the class 'DirigBEAClassProcessor'.
I searched for this class in the dir where i installed beaplugin but
don't find
it

Mac mini VPN headless, slow graphics performance when no monitor plugged in

I am using a Mac mini, headless, with no monitor, keyboard or mouse, via VPN from a Windows machine over a LAN. Everything works fine and setting everything up was a breeze. However, something very odd I noticed was that if my Mac mini does not have a monitor plugged in to its video output, the rendering of the graphics over the VPN is very slow. It is most noticable when hovering over the dock and activating the animations etc, though it is noticable all the time. It's so bad that it would be IMPOSSIBLE to watch a video clip or simple animation. It's as though frames are being dropped. Now, this can be immediately fixed if a monitor is plugged into the Mac mini and turned on, and the VPN to the Mac mini from my Windows machine works flawlessly and the graphics are rendered perfectly, with little to no delay or frame skipping.
I have a hunch that the Mac could be disabling some kind of graphics acceleration when the monitor is not plugged in, but I am not a Mac expert by far, this is my first Mac experience. It was purchased solely for the VPN and headless use, so if I can't get it working properly, it's a waste.
Note, I have tried several VPN client/viewer combinations and they do not change the situation.
Thanks in advance.
Message was edited by: HopkinFrog
Also, when I try to use the remote with the Mac mini (pressing the menu button), over VPN with no monitor attached to the machine, I simply get a white blank screen until I press the menu button again.

I must have been HALF ASLEEP when I wrote this.
I do not mean VPN, I mean VNC!!. Sorry for the confusion.

12c agent install fails with error - The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed

Hi,
I am trying to install 12c agent on windows 7 64 bit server by following m.note .
It is failing with Agent Configuration failed, please see below error message.
INFO: length of temp is2
INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode finished for action: configure
INFO:
INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
INFO:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent Configuration Failed
Thanks,

Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
-If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
or if the system is part of some n/w group and has ip address assigned ?
-Jdk 1.4 version is installed in your system
-Enough free Disk space available in the system
-How much RAM your system has which windows version you are using ?
-Is the DB is coming up properly ? its error related to this. check the logs.
-If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
Pls. update with your findings on above same , for the step next ...
Thanks ,
Uppal

How to genarate performance monitoring report in SAP PI automatically

Dear All,
I have a requirement where I need to automatically generate a report of monthly data of Performance monitoring in SAP PI and send it to business users.
As per my understanding, this can be achieved by pulling the data every month from the tables where these data of Performance monitoring is maintained internally within SAP PI.
Please provide me inputs as which table stores these data/ and solutions to acheive this.
Thanks
Azahar

Refer below links .. You can write abap report to make it happen
Re: Get count of the messages to particular Interface in a day and send email
/people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
http://wiki.sdn.sap.com/wiki/display/XI/UsefulABAPtablesinSAP+XI

HELP: failed to deploy and run WL performance monitor, console extension

Hi All
i downloaded and installed the WL performance monitor, console extension package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at "Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war.
java.io.FileNotFoundException: No such path: null\java\FenwayWL.war
     at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
     at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155)
     at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
     at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war" and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However, it seems
of no use. I still failed to carry out any operations through "performance monitor"
node at left panel of admin console. For e.g, i failed to enable "resources" and
"statistics" monitoring option at "Performance Monitor > Agent Configuration "
screen. Very thankful somebody can help me to sort out my problem. My platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dso

In order to find the PerformanceMonitor web app, the ConsoleExt needs to
examine your classpath to get the appropriate WLHOME. It does this by
searching for .../server/lib/weblogic.jar. Please make sure your CLASSPATH
is correct and matches where PerformanceMonitor is installed. For example,
the path to .../server/lib/weblogic.jar is the same as to ../common/perf. In
my world, they both happen to be d:\bea\weblogic81.
Paul.
"dso" <[email protected]> wrote:
>
Hi All
i downloaded and installed the WL performance monitor, console extension
package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at
"Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war. java.io.FileNotFoundException:
No such path:
null\java\FenwayWL.war at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155) at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war"
and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However,
it seems
of no use. I still failed to carry out any operations through "performance
monitor"
node at left panel of admin console. For e.g, i failed to enable "resources"
and
"statistics" monitoring option at "Performance Monitor > Agent Configuration
screen. Very thankful somebody can help me to sort out my problem. My
platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dso

HELP: failed to setup and run WL performance monitor, console extension on WL 8.1

Hi All
i downloaded and installed the WL performance monitor, console extension package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at "Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war. java.io.FileNotFoundException: No such path:
null\java\FenwayWL.war at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155) at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war" and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However, it seems
of no use. I still failed to carry out any operations through "performance monitor"
node at left panel of admin console. For e.g, i failed to enable "resources" and
"statistics" monitoring option at "Performance Monitor > Agent Configuration "
screen. Very thankful somebody can help me to sort out my problem. My platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dso

In order to find the PerformanceMonitor web app, the ConsoleExt needs to
examine your classpath to get the appropriate WLHOME. It does this by
searching for .../server/lib/weblogic.jar. Please make sure your CLASSPATH
is correct and matches where PerformanceMonitor is installed. For example,
the path to .../server/lib/weblogic.jar is the same as to ../common/perf. In
my world, they both happen to be d:\bea\weblogic81.
Paul.
"dso" <[email protected]> wrote:
>
Hi All
i downloaded and installed the WL performance monitor, console extension
package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at
"Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war. java.io.FileNotFoundException:
No such path:
null\java\FenwayWL.war at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155) at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war"
and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However,
it seems
of no use. I still failed to carry out any operations through "performance
monitor"
node at left panel of admin console. For e.g, i failed to enable "resources"
and
"statistics" monitoring option at "Performance Monitor > Agent Configuration
screen. Very thankful somebody can help me to sort out my problem. My
platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dso

How do I write/use performance monitor to run an action when something happens?

I notice that I get a popup if desktop resources are over-used asking me if I want to turn off the glass desktop.
That's fine.
I've been looking in Performance Monitor for how this is done, as I have a program that periodically runs amok and starts indexing my Documents directory. I usually start to notice my machine getting sluggish when the process gets to about 1.5-2+GB
in Virtual and working memory. At that point it seems to be increasing it's network usage rate geometically, and interrups will start getting delayed or lost -- keyboard will lock up for periods, lots of things freezing temporarily (music will get 10-20
second dropouts) It can even cause a complete system lockup
So what I would like to do is monitor any instance of this process by name ('explorer'), and restart it when it gets to over 1.5GB of usage.
I setup a monitor of virtual size and working memory in the performance monitor, but I don't see how to set up an alarm that starts an action to restart it. (restarting it will cause the problem to go away for anywhere from a few hours to several days).
I've no clue as to what triggers it.
I found a bunch of XML scripts in
Windows/pla/Rules with names like:
Rules.System.CPU.xml*
Rules.System.Common.xml*
Rules.System.Configuration.xml*
Rules.System.Diagnostics.xml*
Rules.System.Disk.xml*
Rules.System.Finale.xml*
Rules.System.Memory.xml*
Rules.System.NetDiagFramework.xml*
Rules.System.NetTrace.xml*
Rules.System.Network.xml*
Rules.System.Performance.xml*
Rules.System.Performance.xml.orig*
Rules.System.Summary.xml*
Rules.System.Wired.xml*
Rules.System.Wireless.xml*
These have some XML language in them that looks like it woud be for monitorying and doing actions:
<Rule name="$(RuleDiskSummary)" enabled="true">
   <Step select="/Report/Section/Table[@name='hotFile']">
    <Exists>
     <Otherwise>
      <Delete select="Summary"/>
     </Otherwise>
    </Exists>
   </Step>
   <Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
    <Exists>
     <Otherwise>
      <Insert>
       <Node>
        <Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
         <Data name="max" label="diskQueue"/>
        </Summary>
       </Node>
      </Insert>
     </Otherwise>
    </Exists>
   </Step>
</Rule>
</Group>
<StringTable>
<String ID="GroupSummary">Add Summary Blocks</String>
<String ID="RuleMemorySummary">Memory Summary</String>
<String ID="RuleDiskSummary">Disk Summary</String>
<String ID="RuleNetworkSummary">Network Summary</String>
</StringTable>
<Rule name="$(RuleDiskSummary)" enabled="true">
   <Step select="/Report/Section/Table[@name='hotFile']">
    <Exists>
     <Otherwise>
      <Delete select="Summary"/>
     </Otherwise>
    </Exists>
   </Step>
   <Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
    <Exists>
     <Otherwise>
      <Insert>
       <Node>
        <Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
         <Data name="max" label="diskQueue"/>
        </Summary>
       </Node>
      </Insert>
     </Otherwise>
    </Exists>
   </Step>
</Rule>
</Group>
<StringTable>
<String ID="GroupSummary">Add Summary Blocks</String>
<String ID="RuleMemorySummary">Memory Summary</String>
<String ID="RuleDiskSummary">Disk Summary</String>
<String ID="RuleNetworkSummary">Network Summary</String>
</StringTable>
Question is, how can I setup it for calling a trigger script when
parameters for Explorer get out of spec.
On confusing issue that stopped me from proceeding, was the time schedule to run the report:
I only allows for once/day.
I need / want continuous monitorying -- say at 1 minute or 3 minute intervals (5 might work, not sure -- doesn't take long for Explorer to get to 1-2G with a network connection of 10Gb.
So how can I monitor and control it?
A side issue -- I notice a resource-control agent for Win 2008 -- but this was disabled for Win7.
Anyone know why resource usage on Win7 was considered less important than on Win2k8 server?
My version of Win7 is Win7-x64-sp1 "Ultimate" [sic] (it doesn't include professional features like resource control)...
Thanks...This has bothered me for over a year and has persisted through new profiles and reinstalls of of the OS.
I have a feeling it is related to MS disabling Network disks in their indexer, so Explorer ends up doing it as a surrogage for things like the search engine (with the results not stored, because they are not local -- the worst of both worlds?)... but that's
just a feeling...
Thanks!
Astara...

You can create a Data Collector Set (create manually, not template), then choose performance counter Alert, configure alert actions, from the script, seems you want to monitor the “physicalDisk” performance, so you can set the “physicalDiskCounters”
into alert action, please follow the instruction in the link below.
Monitor disk space
http://www.ms-opsmgr.eu/?cat=43
If you want to view the detailed process related about explorer when your machine getting sluggish, I'd like to introduce a tool named process explorer to you.
http://technet.microsoft.com/en-in/sysinternals/bb896653.aspx
It can clearly show you the processes running in your system, along with the hierarchical relationship and the cpu usage.
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Help needed in getting real time system performance monitor

Hi,
I need a real time system performance monitor for my solaris.
i am able to graph system usage graph on a daily/weely basis using the ksar grapher.
In the same way i need to capture the system utilisation real time to be viewed on a webpage. Please let me know if there are any free tool/scripts capable of doing it.

Hi,
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Implementation issues
Lifecycle Implementation
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Hope this helps.
Thanks,
JituK

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob

X REALLY slow when external monitor plugged in at boot

Hello all, I am running Kernel 2.6.29.4 with xf86-video-intel 2.7.1-1, Xorg 1.6.1.901 and EXA acceleration (no KMS) on my thinkpad T61 with an Intel X3100. (I keep up-to-date stable.)
Whenever I have the VGA monitor plugged in to my laptop at boot time, when I log in using GDM it takes FOREVER to start XFCE. Super slow motion.
If I wait to plug in the monitor until after X starts, and then type 'xrandr --auto' there is no problem whatsoever.
In both cases, X correctly sets the video mode with no problem. Any idea what is causing the slowdown? Thanks!

No, but I haven't tried in a while since I don't use an external monitor currently. Is it slow all the time, or only if you connect the monitor before X boots? Do you have intel graphics?

2012 Macbook Pro 15" doesn't recognize VGA monitors plugged into displayport

We have a 2012 Macbook Pro 15" (and a 2010, and a 2011). The 2012 doesn't recognize VGA/DVI (old) monitors plugged into it, but it does recognize new DVI monitors.
What gives? I'm not even sure how to diagnose or attempt to treat this.
2012 Macbook Pro
OS X 10.8.3
Wacom Cintiq
Vuzix iWear
etc

Does it see, recognize, any usb devices?
Have you tried a smc reset?
http://support.apple.com/kb/HT3964
If that doesn't fix it and no usb device is being seen by that port then you have a hardware problem and you need to take the system to apple to be fixed before your warranty runs out.

Performance monitor reports and graphs don't show all the counters that were captured

I've run into an odd behavior of performance monitor that I haven't been able to clear up yet: after I run a data collector set, the resulting report only shows a partial list of the counters that I captured, and so does the graph of that report (but different
items).
For instance, I chose the following counters for the data collector set:
\PhysicalDisk(*)\% Idle Time
\PhysicalDisk(*)\Avg. Disk Queue Length
\PhysicalDisk(*)\Avg. Disk sec/Read
\PhysicalDisk(*)\Avg. Disk sec/Write
When the data collection ends, the report that gets displayed shows all those counters for _Total instance and C:, but then E: only shows % Idle Time and Avg. Disk Queue Length. That's it, the report ends there, even though I also have F: and V: drives on
this server.
If I choose to view the graph of this data collection, it only shows those four counters for the _Total instance.
It took me a while to realize that all the data is being captured, but it's just the display that is truncated. If I view the folder then open the report.html, it actually shows all the data. Same with the graphs. If I select to add counters and add
all the missing counters, they are displayed.
I have searched high and low but haven't been able to find more than one post at ServerFault where someone had a similar issue, but no real solution or cause was provided, so I was hoping that someone here might have an idea.
I also found a variety of articles about missing counters due to registry settings or because the counters needed to be reset, but that's a different issue that doesn't apply in my case. By the way, this is on a windows server 2012 R2 VM (file server).

Hi SomeAdmin,
The counter missing often caused by the related registry value is corrupted, please first refer the following related KB then perform a fix then monitor the issue again.
Event ID 3012 — Performance Counter Loading
http://technet.microsoft.com/en-us/library/cc775053(v=ws.10).aspx
More information:
Overview of Performance Monitoring
http://technet.microsoft.com/en-us/library/cc958257.aspx
PerfGuide: Analyzing Poor Disk Response Times
http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
Analyzing Storage Performance using the Windows Performance Analysis ToolKit (WPT)
http://blogs.technet.com/b/robertsmith/archive/2012/02/07/analyzing-storage-performance-using-the-windows-performance-toolkit.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Regarding performance monitoring of RWB

As far as I know , there are two ways to show the data through performance monitoring.One is [overview data],the other is [detailed data].My question is,my [overview data] is displayed successfully,but [detailed data] doesn't display anything.Some parameter need to set for [detailed data]?
Any help would be appreciated.
Brand.

Hi Brand,
If detailed data is missing i think some settings were missed & just go thru the links given below ur problem will be solved
Can you check the following function modules. In SE37 look for FMs "SXIPERF*" . You will get
SXIPERF_RUNTIME XI Performance: Runtime
SXIPERF_RUNTIME_VERI XI Performance: Runtime
SXIPERF_CONFIG XI Performance: Configuration
SXIPERF_EVALUATE XI Performance: Evaluation
SXIPERF_GET_TRANSID XI Performance: Transaction ID
Refer this SAP Note-768456
Message Montioring errors- SAP Note-928862
http://help.sap.com/saphelp_nw2004s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/content.htm
Try to perform SLDCHECK First If you face any problem means Use this Help file to solve the Issue
http://help.sap.com/saphelp_nw04s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Regards,
Vinod.

PI 7.1 Performance Monitoring - Advanced Adapter Engine (AAE)

Hi Experts,
how can i use the "Performance Monitoring" from the RWB, to see all the messages (including the messages from the AAE) for a specific timeperiod? For example, i want to know how many messages go through the PI (including AAE) on one day.
Best regards,
Sven

Hi Sven,
Kindly find the below documents will helps you more
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70b8adc3-728c-2a10-7fad-d43f29074ef8
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c02dde55-b30d-2c10-a68b-e80e0d86336d
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10cf9746-e819-2c10-bd82-97bfbde8214a
Regards
Venkat Rao .G

OVD: Performance Monitor Plug-In

Similar Messages

Maybe you are looking for