OVD SSL connection drops without any errors.

Oracle Virtual Directory offers standard features such as:
�� SSL/TLS - Oracle Virtual Directory offers SSL/TLS capabilities that provide for secure
communication sessions with LDAP clients. This allows you greater security by allowing Oracle
Virtual Directory to be the trusted transport mechanism.
HOWEVER, the SSL port keeps dropping, it never binds using the SSL connection.
Has anyone ever successfully binded using SSL?

Q. Do you have a solution to configure SSL after installation of OVD
A. No has to be done at install
Q.Should I reinstall if the client changes the plan to use OVD SSL later
A. Yes as the install is very fast.

Similar Messages

  • Extract abends after sometime without any errors in logs

    Hi Folks,
    I am implementing unidirectional simple replication for one schema (DDL & DML) without GG data pump and I am newer to GG.
    Extract abends after sometime without any errors in logs. I doubt I did not configure exttrail/rmttrail properly.
    What should be the commands to configure trails in this scenerio ?
    Any suggestions ?
    Regards
    Edited by: LazyDBA11g on Aug 22, 2012 1:00 AM

    Thanks Paddu for reply but I can not use DBLOGREADER as it is not compatible in my env
    Use the TRANLOGOPTIONS parameter with the DBLOGREADER option in the Extract parameter file if the ASM instance is one of the following versions:
    Oracle 10.2.0.5 or later 10g R2 versions
    Oracle 11.2.0.2 or later 11g R2 versionsLastly I dont have connectivity issue with ASM.
    Regards
    Edited by: LazyDBA11g on Aug 22, 2012 1:03 AM

  • Web service hangs without any errors and exceptions

    hi all,
    We have a ejb application web service that is binded with shedular bc to trigger for every 2 hours
    and it runs for one and half hours making continous transactions with database..
    In the web service a outer for loop will be iterated by fetching list of data from database. And this list will be iterated in the inner for loop.
    This logic works fine for sometime, but suddenly after some random period of time without any errors and exceptions the outer for loop gets no list from database
    and the inner for loop is never executed and the web service completes processing.
    This i can able to see form my log files.
    i dont understand why the list is not fetched from the database, is the problem with hibernate or it lost the connection with database,
    either case it has to throw exception but the service is not.
    otherwise does this is garbage collector issue.
    Thanks in advance,
    Bye

    Without any code to see what's going on we'd be flying blind trying to answer this one.

  • OBIEE 11.1.1.6 installation hangs without any error or warning

    Hi all,
    I'm trying to install OBIEE 11.1.1.6 on a previous 11.1.1.5 installation, on Windows Server 2003 Enterprise Edition. I followed the instructions on the "Oracle® Fusion Middleware Upgrade Guide for Oracle Business Intelligence 11g Release 1 (11.1.1)" manual, "Moving from 11.1.1.3 or 11.1.1.5 to 11.1.1.6" paragraph.
    All checks give positive result but then installation hangs without any error or warning. I tried 3 times with the same behaviour.
    Any suggestion? Anyone having similar problems?
    Thanks in advance,
    Cristina

    The only error I get (in the Windows application event viewer) is:
    [nQSError: 12002] Socket communication error at call=recv: (Number=10054) An existing connection was forcibly closed by the remote host
    Any suggestion?
    Thanks,
    Cristina

  • GRUB loads but get thrown into rescue shell without any errors

    I forgot to read the news before I did an upgrade for the first time in a long time and borked my system because of the filesystem update.
    Used to get Arch news by mail with a RSS forwarder, but the service I used shut down and I forgot to sign up for another one.
    Used chroot and it seems like I fixed the filesystem and bash packages with all the related symlinks, and I did mkinitcpio -p linux and got no errors.
    However when I boot I get directly thrown into GRUB rescue shell without any errors. Tried to reinstall GRUB but didn't change anything.
    Read GRUB - GRUB UEFI drops to shell, but I still have a grub.cfg. I believe I just have a pretty standard GRUB2 installation, however I'm not really since it's a long time since I installed it and it was a lot of back and forth because I tried a lot of combinations of GPT/MBR and GRUB/Syslinux since my HP ProBook 6460b laptop has UEFI. If more information is needed about my current GRUB install please do ask, chroot is working just fine.
    My system is updated and I'm using systemd.
    What should I do to fix my boot/GRUB?
    Also, I'm not sure if it's relevant, but when I try to run a Lubuntu LiveCD (same arch as my Arch install) it fallbacks to BusyBox with the error "unable to find a medium containing a live file system".
    It's still a fully working TTY so I haven't bothered to research further why. Maybe just a corrupt usb memory drive (setup).
    Last edited by Occi (2013-08-10 17:40:59)

    unilx wrote:You can manually create a grub.cfg file, the wiki has a detailed section on this, just Google: "arch linux manually creating grub.cfg"
    This might be the fix, but I'm not sure what I did that could've changed it. Anyway, I'm tired of having to use time maintaning my system just for a simple update and switching to Debian testing. Learning alot playing around with Arch, but the last half year or so have just felt like a big hazzle with all the (in my opinion) unecessary changes and distancing from it's BSD-like roots and KISS (systemd and all that jazz).

  • Restore not work without any error?

    I have an iPhone 4 , doesn't work when I want to restore with itunes and stop everything without any error . please help????

    You are very light on Details and Specifics... Thus making it difficult to assist you...
    If you are using windows...
    Temporarily disable your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • Propagation Queue hanged without any error.

    Hi All,
    We have bi-directional replication using streams on 10g database.Last night propagation process hanged without any error in any of the queue.
    We tried to restart it but propagation queue didnt stop.It just went into infinite loop.
    Finally we have to kill the session.Then we restarted the database and everything worked fine.
    Just curious what happened there is no error so far neither in the queue nor in alert log/trace files.
    Please help!!!
    Thanks for all your help!!!
    Kind Regards
    Rahul

    There is insufficient information here to help you.
    If you have not patched to 10.2.0.4 that might be something to put on your radar sooner rather than later.

  • PO Approval stuck in error without any Error message

    Hi All,
    we have few notifications for PO Approval where they are stuck in error without any error message. they are also not showing in the worklist of the approver nor in the wf_notifications table. please help on this on how to solve this. we have done various options to solve the issue like skip/rewind/suspend/retry. but none of them works..... below is an extract of such an notification -
    Error in Workflow POAPPRV/3112-127925
    From SYSADMIN
    To Das, SD
    Sent 12-Dec-2011 16:55:01
    Closed 12-Dec-2011 17:07:30
    ID 164593
    Responder Das, SD
    An Error occurred in the following Workflow.
    Item Type = POAPPRV
    Item Key = 3112-127925
    User Key =429766-245
    Error Name =
    Error Message =
    Error Stack =
    Activity Id = 10770
    Activity Label = ROOT:POAPPRV_TOP
    Result Code = #STUCK
    Notification Id =
    Assigned User =
    Thanks,
    Sam D
    Edited by: Sam D on 12 Dec, 2011 1:45 PM

    Please post the details of the application release, database version and OS.
    Can you find any errors in the Workflow log file?
    All Purchase Orders or Requisitions Getting Stuck in Pre-Approved or In Process Status - Troubleshooting Checklist [ID 1104843.1]
    Troubleshooting for Requisitions / Purchase Orders in Process or Pre-Approved Status [ID 225017.1]
    Also, search MOS for (POAPPRV stuck) and go through the docs.
    Thanks,
    Hussein

  • I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

    I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
    I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
    Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
    Do you have any suggestions?
    Thanks, Jack

    Hi Jack, great help so far!
    Internal...
    http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
    External be sure it's Firewire & not Bus powered...
    http://eshop.macsales.com/shop/firewire/optical-drives/

  • Hello I Download Adobe Photoshop CC 2014 Last Night i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message I Need Help Can You Resolve This Problem i Tried Creative Cloud Sign Out Nd Sign iN But iT DidnT ReSolve My

    Hello I Download Adobe Photoshop CC 2014 Last Night
     i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
    I Need Help Can You Resolve This Problem

    Lotfi are you receiving any error messages during the installation?  I would recommend reviewing your installation logs for errors.  Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.  You are welcome to post any specific errors you discover to this discussion.

  • Nokia Store Quits without any error messages.What ...

    My inbuilt Nokia store application within my Nokia Asha 305 keeps quiting without any error messages.What do i do to resolve this.I recently updated the S40 OS could that be the reason. And why?

    Just reset it to factory. That worked for me

  • Concurrent Program ends in Error without any error message - Apps 11.0.3

    Hi,
    We have a concurrent program which errors out sometimes without any error message in log file or anywhere else. This happens intermittently. Is there anyway to see why this happens ( to see error message somewhere else - like FND tables ?). Any feedback is appreciated. This happens in Oracle Apps 11.0.3.
    thanks
    Ram

    Ram,
    Is this a custom or standard concurrent program?
    Was this working properly before? If yes, what changes have been done recently?
    Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
    Regards,
    Hussein

  • Imac shuts down without any error message

    imac shuts down without any error message

    Need more details. Which iMac? Which OS? When does it shut down, under what circumstances? What are you doing when it happens? Is it reproducible, i.e. can you make it happen? Does it appear to be getting very hot before it shuts down?
    Open Console in Applications>Utilities and navigate to system.log. Do you see any messages related to shutdown from the time when this has happened? Enter "shutdown" in the filter field, upper right corner.

  • Weird error without any error message

    I've been working on some actionscript 3 system. And all of a
    sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in
    Flash CS3, a white screen would open up (instead of the normal
    flash program) and no trace-output would be given.
    Three hours later I found the cause of this weird problem.
    It's (simplified) the line:
    var value:Number = -(true ? 1 : 0); // This one doesn't work.
    Put this line in your script, and your entire program won't
    execute. And without any error message! I was wondering, why is
    that? By the way, the following lines do work:
    var a:Number = -(2*3+4); // Gives -10.
    var b:Number = (true ? 1 : 0); // Gives 1.
    var c:Number = -b; // Gives -1.
    var d:Number = 0-(true ? 1 : 0); // Gives -1.
    var e:Number = -((true ? 1 : -1) as Number);
    So, my guess is that the code (true ? 1 : 0) gives some sort
    of data type which is not a Number, and therefore doesn't except
    minus signs. But that wouldn't explain why it doesn't even give an
    error. So what IS wrong with it?

    ok - well if these numbers are used to begin the execution of
    a method in your file, it's likely that they are not firing up
    because the syntax here is incorrect. in order to use this type of
    conditional operator (which i do use quite often as well, handy
    convenient ;) the structure should be:
    var value:Number = (condition) ? 1 : 0;
    'true' is not a 'condition' but a boolean result, so it
    should not be evaluated in the way have been using it here -
    however 'true' is 'true' so the result will always be 1 (the first
    expression in the operator) - i'm not certain why you would need a
    -0 result and if you are always wanting a 'negative' number then
    use that number in the return expression, as in:
    var value:Number = (condition) ? -1 : 0;

  • What software can be use to update iphone 3g 4.2.1 to iOs 4.4.4 without any error occuring...???

    what software can be use to update iphone 3g 4.2.1 to iOs 4.4.4 without any error occuring...???

    Ah...there is no iOS 4.4.4, & iOS 4.2.1 is the end of the line for your phone. There are no further updates available.

Maybe you are looking for