Over 20 MG
I am trying to download yahoo messenger on my Iphone 4 however I keep receiving a error message that states that the application is over 20MG and that I must connect to a Wi-Fi network or use ITunes on my computer to download, however it still isnt working. How can I resolve this?
Make sure your phone shows you are connected to WiFi and not 3G and try again.
Similar Messages
-
Unable to capture audio from BlackMagic HD Extreme via Voice Over tool
Hi !
I'm trying to capture audio via my BlackMagic HD Extrem card using the Voice Over tool in FCP6, but I can't, no audio is incoming.
I can ingest audio with video using log and capture, then I know my card and my cables are working.
I tried to set the BM card as audio input in my Audio's System Prefereces Pane, but it isn't working either.
I've been looking on the BM website, but I found nothing.
Can you help me ?
ThxThanks for the reply.
Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed. -
Jabber call to voice mail fails with fast busy over VPN
I have an issue that I ran into with CIPC phones over a VPN. If a CIPC phone called over a VPN and started ringing a phone the call would fail with fast busy at the time the call would be forwarded to voicemail. I found the issue was when remote the CIPC phone would negotiate the g.729 codec, when forwarded to a voicemail pilot over a SIP trunk set to g.711 the call would fail due to codec missmatch when no transcoders are present.
So now I am running into what I believe to be the same issue with Jabber, when on premise the calls to voice mail work just fine, but when remote they fail. I can directly call the voicemail pilot without error, but if calling a phone the call gets fast busy at the point we are forwarded to voicemail. Even though all my regions are set to talk to all other regions on G.711 and the voicemail SIP trunk is set to G.711, I believe with the new features in CUCM9 that a lower speed codec has been negotiated since the we are going over the VPN, or Jabber has done this as it knows it's over VPN (not sure). WIth CIPC I could go into the settings and turn off the Optimize for Bandwidth check box and the call would negotiate G.711. With Jabber I can't find anything that would tell my Jabber client to stay on G.711 and I can only imagine this is a codec missmatch as the following are true.
1. CIPC and Jabber share the same line
2. VPN established and CIPC optimised for low bandwidth un-checked
3. Over the same VPN the CIPC phone can leave a voicemail
4. Over the same VPN the Jabber client gets fast busy once forwarded to voicemail
5. Voicemail environment is Exchange-UM over SIP trunk
6. SIP trunk is assigned a Device Pool, that is assigned to a region that all other regions communicate G.711 to
7. On CIPC if optimised for low bandwidth is checked I get the exact same issue as I get with the Jabber client (fast busy when forwarded to voicemail)
Would anyone know what I can do in CUCM 9 to fix this issue, as said no issue when all devices are on premise. Wondering if there is a service parameter or a way to change the codec selection so the Jabber client attempts to always negotiate G.711. The correct answer would be to get some PVDM DSP resources and kick up a transcoder in my resource group, and that may be what I talk them into doing if I have no other options.We have been getting the exact same thing for almost a year now... since switching to FiOS Digital Voice in May of last year! Every time I call in to report it they 'escalate' the issue but it never gets resolved. The problem seems to be in the initial connection. Most of the time it works fine but, several times a month, after I call to get messages and it starts to play the new message it goes dead and I get the busy signal. I get the same message when I call back: “I’m sorry – that account is in use at this time. Please try again later!” I have even called in with my cell phone and get the same message! I HAVE EVEN used the Internet to see if I could get my messages and, when I hit Play, I get a pop-up saying: “Your Voice Mail box is currently in being accessed; please try again later. If the problem continues, please contact our Customer Support Center at 1-888-553-1555. We apologize for any inconvenience.” This is obviously a software bug that Verizon has no clue on how to troubleshoot OR fix!!! I wonder how many people have the problem and just don’t bother reporting it because of the hassle? When it first started happening they destroyed my entire mailbox and I had to re-enter the complete mailbox setup again – 3 times!!! NEVER let them talk you into that!!! It’s their problem and they need to fix it!!!!!!! I wish I could go back to the ‘normal’ voicemail we originally had… they want hundred$ to switch back because I’d be breaking my #$@%^&* contract! Good luck if you have Verizon………
-
I have files that have been on my computer for over a year and I have used them several times and all of a sudden they wont open. I received an error message saying they are improperly downloaded or came as an email attachement which is not the case. Please advise
They seem to be word files - they will open if I choose "open with" microsoft word, but if I double click they don't open they are appearing as PDF on my screen. I even opened one and then tried to "save as" making sure I chose .doc and they still appear as PDF
I just created a new document response.doc in word and when I saved to my desktop it appears as a PDF file and I absolutely did not create a PDF or save as PDF it was a simple word
doc.
The message says "Adobe reader could not open response.doc because it is either not a supported file type or because the file has been damaged (for example attached in an email and not properly decoded)
The reader version is I believe the most current, I always update when prompted. OS is Windows 8 -
How can I make sure my history doesn't expire and that I can transfer over places.sqlite?
There's probably alot of questions on this subject asked already but I've gone over just about all of the possibly relevant ones that've been already asked and I still can't figure out what to do. I'm trying to move my complete history from an XP Firefox profile over to a Windows 7 profile on another computer. Do I just do it by copying the places.sqlite file within that XP profile over into my USB flash drive, then replacing the places.sqlite in the Winodws 7 profile with the one from the other one? And after the file's in the right profile will I be able to just view all the sites I viewed on the old computer on the new one's history dialog box? I only am transferring my XP history to my Windows 7 because I want to look at stuff several months back and it keeps expiring on me, even to the point of getting rid of a month of history a week or so ago. This brings me to my other point, I keep up fairly well with updating both of my Firefoxes but recently (and I think this was way, way after they updated the browser so the history isn't set to expire by days anymore) the history just isn't reliable anymore. My XP will not only expire older months of history faster and faster it seems, but individual websites at the end of each month will actually disappear as I view new ones, instead of it all staying in there and just expiring each old month as a whole. Also, random sites in every month scattered all over the list of URLs will just disappear, and random sites that I've only visited in the past couple days will insert themselves randomly into much older months of history, which makes it hard to figure out the URLs I've seen, this last one seems like a common problem from what I've read, and all of these problems seem to be slowly creeping into my Windows 7 as well when they were originally on only my XP. The thing is for a very long time my Windows 7 would keep every ounce of my history that I kept on it, unless of course I went through the Clear History process myself. Now it seems to be slowly deleting it and having all the other problems that I mentioned earlier. I've got 592 GB out of 931 GB that's free space on my Windows 7 that I want to transfer my XP history into, and my Control Panel System panel says I've got 8 gbs of RAM in total. If I need to get some other information on RAM mention how to do that if you could. So in total, how can I transfer my XP history over into my Windows 7 so I can view all the sites I viewed on my XP in my Windows 7 history panel, as well as view all the old expired and/or manually deleted history on my Windows 7, without worrying about whether it will expire itself while I'm viewing it and writing down the relevant URLs that I need to know about. If I can only keep all my history through installing an add-on, a link to a relevant legal add-on that'll work well on both operating systems would be appreciated. Thanks to all here. (:
Hello Saethwyr99,
''Do I just do it by copying the places.sqlite file within that XP profile over into my USB flash drive, then replacing the places.sqlite in the Winodws 7 profile with the one from the other one?''
you are correct : [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile#w_your-important-data-and-their-files Your important data and their files]
''Also, random sites in every month scattered all over the list of URLs will just disappear, and random sites that I've only visited in the past couple days will insert themselves randomly into much older months of history, which makes it hard to figure out the URLs I've seen, this last one seems like a common problem from what I've read, and all of these problems seem to be slowly creeping into my Windows 7 as well when they were originally on only my XP.''
from Firefox 4 and above versions there is not a time limit for the history.
Firefox determines automatically how many pages can be kept '''without affecting the performance.'''
''as well as view all the old expired and/or manually deleted history on my Windows 7''
i think this in not possible
''If I can only keep all my history through installing an add-on, a link to a relevant legal add-on that'll work well on both operating systems would be appreciated.''
check the next add-on : [https://addons.mozilla.org/en-us/firefox/addon/expire-history-by-days/ Expire history by days]
thank you -
UCCX 10 open and close over-ride
I am trying to find a way to into create a script to have it so that an supervisor can call a number and over-ride to close or open option.
does anyone has a sample script to share?
thanksThere are many posts on this topic here, and some good script examples here:
Cisco Unified Contact Center Express Script Repository 9.0(2) -
I was originally told by Verizon that if I joined, I can eventually take over the lines of various family members. Now that I've joined, and my family members all upgraded their phones and are on Edge, Verizon is telling us that we can't merge into one plan (because Edge lines can't be transferred to another account).
Is this true, and, if so, what is my recourse since I was lied to.Well, yes and no (as far as being lied to). I asked on several occasions (I have the chat transcripts to prove it) if there would be any issue if the lines were all already on Edge, and was told each time that under no circumstances would there be any issue. The latest being today (I know it's after the fact, but I wanted proof that this is what the chat people are saying). I asked "I have currently have an account with 3 phones on Edge. My brother and his wife, and my parents, also have plans all on Edge. I would like to 'take over' their lines. I want to make sure there is no issue with the Edge plan and that I can simply 'take over' their lines with no problems." I was told "Yes. That would be correct." Again, this is what I was told in the past as well (my original post didn't make clear the timing of the chats and upgrades to Edge..). Every time I chatted I mentioned that the accounts were going to be on Edge or (later on) were already on Edge. Even before my family members upgraded to Edge, not one single chat or phone representative (and my brother asked the same thing in a store) mentioned NOT to upgrade to Edge because it couldn't be transferred. Everyone just said yep, no problem. The ONLY reason I even joined Verizon (I was on Straight Talk) was because of the More Everything and Edge plans (we wanted a family plan with 6 people and over 10GB so we'd each save $25/line). Otherwise I never would have joined Verizon and my family wouldn't have upgraded either.
-
I need to uninstall and reinstall iTunes (it won't let me update). I have IE 8 on Windows XP, and iTunes 10 something. In my Program files list I see iTunes and iTunes (2) and even iPod and iPod (2) where a tech had to back up and do this for me before. I'm just trying to fix it all. I keep getting the "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below." I can even run a search and find the folder, but it gives me the same error message. I was planning on using the Microsoft Fix-It tool to help uninstall then Reinstall iTunes. But I need to backup my library. So, how do I copy or back up my iTunes library of over 1,500 songs? Can I copy the folder to desktop or can I use a Flash Drive to backup my music? I don't want to do anything until I know for sure how I can backup my songs, and then reinstall them into iTunes. Thanks for any help.
Ok, thanks that helps. I don't have an external hard drive though. What about backing up through 'the cloud'? I'm just wondering since my husband syncs his iPod to the PC through iTunes and he's worried that he will lose all the songs on his iPod if the library is lost from iTunes and he tries to 'sync' it up again. I'm not exactly sure how to 'copy the entire iTunes folder' either. I kinda suck at this unless I have step by step instructions, which I haven't found yet on iTunes help or other sources.
The only way I know how to back anything up is by going back to a restore point, etc. (as stated before, we don't have an external hard drive.)
Thanks for the info. -
can I transfer pictures from one iPad to another without going over iTunes?, can I transfer pictures from one iPad to another without going over iTunes?
Yes, use 3rd party apps like Photo Transfer App.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/69507ce7f854c405f54 77bea99f4d498.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/79b3173fda7b6a6e148 5b463198f6acf.jpg -
Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?
Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha -
My wife and I have made many purchases over several years on seperate accounts, how could we join them into one account, without losing everything? We both use Iphone 5's and share an Imac at home.
Purchases using one Apple ID cannot be merged or transferred to another Apple ID. Purchases are forever tied to that Apple ID used. You have to decide which Apple you want to use for purchases and stick to that Apple ID so that you can share: Settings > iTunes & App Stores > Apple ID : > use the same Apple ID here to share purchases.
-
We have about 20 iPhone's in our environment and syncing and updating them has become a real chore lately. Everyone has their own iTunes account and apps that they use. Is there a way that they can be synced, backed up and updated over the air (not iCloud) to the same MAC? Because we are in the financial sector we will not be able to use iCloud. Should we look into some sort of private cloud and if so; any suggestions on how to accomplish it would be greatly appreciated.
Thank you in advance,
JWe have several macs, several ipods, a couple of iphones, several itunes store accounts. So far no problem. You might have to share passwords if you want to share content. I think iStore accounts can only be used on up to 5 computers. We have 7, so have to be a little careful about that. I don't think there is a limit on how many iDevices can be used with one account. I also don't think there is a limit on how many accounts can be used on a single computer (might be wrong about that). You have to be logged into the iStore to download content, and your computer has to be registered with the account to use the content, but once it is on, and registered, syncing to an iPod is not a problem (you do not have to login in again for each account the content was purchased from). I'm just glad I only have two kids, and one wife - things could get trickier in a big family with . . .
-
Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get her Home Sharing account transferred over to mine so that I can use it with my PC? Thanks!
As Winston Churchill wrote, however you might want to do a factory reset on the Apple TV.
This way all information pertaining to your daughter will be removed from the device. Specifically if see was sign into any of the streaming service, Netflix, Hulu, etc. her credentials will still be associated with this Apple TV, doing a factory reset will remove all that and make it as if you purchased the device and just plugged it in.
regards -
How to use independent replacement paths for same KF over several months?
Dear Experts,
I have a query requirement to show KF values for items that meet a condition on another KF for a five month period. I know that I can accomplish this using a replacement path variable on item for one month at a time, however I am not sure how to do this for multiple months in one query.
This is an example:
Month 1
KF 1 > 0 for Items A & B.........so show KF 2 for for Items A & B
Month 2
KF 1 > 0 for Items B & C.........so show KF 2 for for Items B & C
Month 3
KF 1 > 0 for Items A & C.........so show KF 2 for for Items A & C
Thanks in advance for your help!
KathrynOk, Nancy, code copy/ paste did work fine.
what does this mean:
"Change the image in the properties panel to display your new image."
(the image is displaying ok)
NEverthesless, I think I got Murrays old notes.
Here is my new version of Murrays writing, easiest way I think:
You open up a pre-existing html, say Chicago. Then drag over with pointer to the new jpeg you want (Buffalo). It replaces Chicago with the buffalo jpeg, all links work perfectly. Then do a save as called Buffalo. -
I have multiple ipods on my account (kids) and one or more of them purchased over $250 worth of games. I need to know which child(ren) did this so they can pay accordingly. The accout only tells what day they were purchased but doesn't say which ipod purchased. Any help would be greatly appreciated.
It could be:
iTunes Store & Mac App Store: About credit-card authorization holds
You could contact itunes support and ask. Click Support at the top if this page, then click the link under Contact Us -
My family currently shares one Apple ID on multiple devices and has for quite awhile. How do I switch everyone over to their own Apple ID and the Family Sharing without having to erase their iphones and ipads?
Thank you again for your time, GB.
I set up individual Apple ID's for my children so that they could have their own Apple ID on their individual iPad minis (gifts from grandparents last year). When I go to iCloud under Settings, I see my Apple ID listed at the top, then my children's listed under Family Sharing. So the device is still using my Apple ID for iCloud, iTunes, etc., correct?
To "assign" their own Apple ID to their own iPad mini, I would need to "Sign Out" from my Apple ID. When I attempt to do so, I receive a warning that all of the Documents and Data will be lost/deleted.
So, instead of doing this, I figured out that I could do what you suggested. Signing in using a child's Apple ID will allow her/him to use Game Center, FaceTime, and Messages just fine. However, using their Apple ID for iTunes & App Store proved to be a problem: Purchased Music and Movies appeared in iTunes, but my Purchased Apps did not appear. Some Apps even disappeared, e.g. Proloquo4Text (a $99 app to help my son speak with his iPad).
So I reverted to using my Apple ID for iTunes & App Store, and I get everything that I want, EXCEPT for the iCloud storage for each Apple ID.
So that's when I started wondering how Family Sharing was really benefiting me ~ It was a lot of work (deleting apps to allow space to download iOS 8, etc) without any benefit that I can see. UNLESS I find a means to allow me to sign in each iPad's iCloud account with a different AppleID, then perhaps restore the Documents and Data from a backup? Would that work?
Thanks.
Maybe you are looking for
-
I made the unfortunate mistake of linking my apple ID to a work email address, which I obviously no longer have access to. I have another, personal apple ID registered to a personal email, but I don't want to re-purchase software. Is this possible? E
-
photostram has stopped working between iphone and pc, uploading and downloading. I have gone through all the setups, made sure everthing is on but still no luck. Any ideas??
-
I have a Mac book pro on vesion 10.6.8 and want to access icloud as it works great on my iphone 4. Not sure best way to upgrade as some of the review of Lion on the appstore are awful. Any advice as I also have MIcrosoft word etc and don't want to
-
Hi, I have developed an application to view images from an IP camera. By this I can simualtaneously view images from about 25 cameras. The problem is that the CPU Usage increases as the no of player increases. My Player is JPanel. which continuously
-
PE7 crashes with ad2mpgvdec.dll error
The previous thread on this topic doesn't seem to match my problem. I am wondering if anyone has any other ideas or if its time to contact support. PE7 (downloaded) on Vista32 (UAC disabled) Program installed error-free, starts ok. I start a new proj