Over 500 error messages per second
Could anyone please explain why I've got hundreds of the following line in my console log -
Mon Jul 5 17:38:18 kelvin-08e2b175 sandboxd[3383] <Notice>: mDNSResponder(20) deny file-read-data /private/var/db/com.apple.parentalcontrols.keychain.EOtHFS
Mon Jul 5 17:38:18 kelvin-08e2b175 sandboxd[3383] <Error>: * process 3383 exceeded 500 log message per second limit - remaining messages this second discarded *
It seems to be using a lot of processing power for nothing and slowing things down.
How do I resolve? I've done a repair disk and a repair permissions and disk is less than 30% used.
Manuy thanks! Kev
Keep Norton far away. Terrible reputation for wrecking Macs. You might try searching with EasyFind and make sure you got every last bit off.
http://www.devon-technologies.com/products/freeware/
Search using all possible names, Norton, Symantec etc. Set it to scan all files/folders and invisible files.
Similar Messages
-
Exceeding 500 log messages per second......!
I get the following message thousands of times in my system log, and it's really slowing my machine down -
Sep 2 11:16:50 kelvin-wards-imac-139 sandboxd[1812]: mDNSResponder(20) deny file-read-data /private/var/db/com.apple.parentalcontrols.keychain.Ynx3Br
Sep 2 11:16:50 kelvin-wards-imac-139 sandboxd[1812]: * process 1812 exceeded 500 log message per second limit - remaining messages this second discarded *
Any idea how to get rid of it? I've done permissions repair and disc repair and keychain repair and am not using parental controls. It's a bit faster since I deleted Intego VirusBarrier x6 which was causing MAJOR problems on my Mac and identifying the above message as a fault.
Kelvin
Message was edited by: KJ WHello kj:
Did you completely remove the A/V software (uninstall)? That junk buries things all over the system.
I would probably reinstall OS X from the software install DVD and then run software update. As you have noted, A/V software on a Mac is a waste of resources and they frequently cause significant problems.
Barry -
10.6.4 OD Master: slapd exceeded 500 log message per second limit
We've got here a 10.6.4 Server OD Master setup with 800 users, 12GB RAM that sometimes starts to get unresponsive. It's slapd that suddenly refuses to respond. CPU load rises to around 10-15% which is high for Intel Xserves. When this happens, our mail service can't authenticate anymore (we use communigate with an external authentication helper script that is designed to restart every 30 seconds. If we restart slapd, all is fine again for a week or so.
DNS is all fine, Kerberos and password server ok, changeip -checkhostname reports that all is ok. The server was setup from scratch with imported groups and users from a 10.5.8 od master. I've already increased the the amount of returned values of the ldap to 25000 that didn't solve the issue because we first thought the external helper script of our mail server causes the problem, but it's in fact slapd that hangs. What could trigger this behavior with a brand new Xserve with 12GB RAM, with all services configured perfectly?
Excerpt of the error log:
request: socketpair failed 24 (Too many open files)
Aug 27 11:50:51: --- last message repeated 499 times ---
Aug 27 11:50:51 authority slapd[92258]: * process 92258 exceeded 500 log message per second limit - remaining messages this second discarded *
Aug 27 11:50:52 authority slapd[92258]: dnssd_clientstub deliver_request: socketpair failed 24 (Too many open files)
Aug 27 11:50:52: --- last message repeated 499 times ---
Aug 27 11:50:52 authority slapd[92258]: * process 92258 exceeded 500 log message per second limit - remaining messages this second discarded *
Aug 27 11:50:53 authority slapd[92258]: dnssd_clientstub deliver_request: socketpair failed 24 (Too many open files)
Aug 27 11:50:53: --- last message repeated 499 times ---
Aug 27 11:50:53 authority slapd[92258]: * process 92258 exceeded 500 log message per second limit - remaining messages this second discarded *
Any idea what this could be?
Thanks,
Alex
Message was edited by: Alex33I was able to identify the cause. Wrote in this thread the solution:
http://discussions.apple.com/message.jspa?messageID=13160082#13160082 -
I have a number of logs that suggest there is something not working correctly. This error is generated on start.
coreservicesd[55]: *** process 55 exceeded 500 log message per second limit - remaining messages this second discarded ***
Any ideas on what might be happening?
Mar 4 10:53:59 TJBs-MacBook-Pro mds[39]: (Error) Server: ==== XPC handleXPCMessage XPC_ERROR_CONNECTION_INVALID
Mar 4 10:53:59 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] ([0x0-0x15015].com.apple.AppleSpell[193]): Exited: Killed: 9
Mar 4 10:53:59 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.mdworker.pool.0[508]): Exited: Terminated: 15
Mar 4 10:53:59 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.quicklook.ui.helper[463]): Exited: Killed: 9
Mar 4 10:53:59 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.talagent[138]): Exited: Killed: 9
Mar 4 10:53:59 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] ([0x0-0x51051].com.apple.QuickTimePlayerX[464]): Exited: Killed: 9
Mar 4 10:53:59 TJBs-MacBook-Pro loginwindow[42]: DEAD_PROCESS: 42 console
Mar 4 10:54:00 TJBs-MacBook-Pro airportd[646]: _doAutoJoin: Already associated to “9868LT1”. Bailing on auto-join.
Mar 4 10:54:00 TJBs-MacBook-Pro shutdown[649]: reboot by MASTER:
Mar 4 10:54:12 localhost bootlog[0]: BOOT_TIME 1330883652 0
Mar 4 10:54:24 localhost UserEventAgent[11]: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
Mar 4 10:54:14 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Mar 4 10:54:23 localhost com.apple.launchd[1] (com.apple.sandboxd): Unknown value for key POSIXSpawnType: Interactive
Mar 4 10:54:24 localhost UserEventAgent[11]: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 12551
Mar 4 10:54:24 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
Mar 4 10:54:28 localhost com.apple.pfctl[32]: No ALTQ support in kernel
Mar 4 10:54:28 localhost com.apple.pfctl[32]: ALTQ related functions disabled
Mar 4 10:54:29 localhost com.apple.ucupdate.plist[25]: ucupdate: Checked 1 update, no match found.
Mar 4 10:54:31 localhost mDNSResponder[35]: mDNSResponder mDNSResponder-320.14.0 (Nov 16 2011 01:16:56) starting OSXVers 11
Mar 4 10:54:32 localhost mds[34]: (Normal) FMW: FMW 0 0
Mar 4 10:54:34 localhost com.apple.usbmuxd[24]: usbmuxd-263 on Nov 14 2011 at 18:58:10, running 64 bit
Mar 4 10:54:34 localhost airportd[65]: _processDLILEvent: en1 attached (down)
Mar 4 10:54:36 localhost mds[34]: (/.Spotlight-V100/Store-V2/E6A82D50-3EA4-4011-B64F-87EB86ACF9E3)(Normal) IndexGeneral in openReverseStore:Shadowing reverse store on open
Mar 4 10:54:37 localhost UserEventAgent[11]: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
Mar 4 10:54:37 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
Mar 4 10:54:37: --- last message repeated 2 times ---
Mar 4 10:54:37 localhost configd[14]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
Mar 4 10:54:37 localhost configd[14]: DHCP en1: INIT-REBOOT transmit failed
Mar 4 10:54:37 TJBs-MacBook-Pro configd[14]: setting hostname to "TJBs-MacBook-Pro.local"
Mar 4 10:54:37 TJBs-MacBook-Pro configd[14]: network configuration changed.
Mar 4 10:54:38 TJBs-MacBook-Pro UserEventAgent[11]: ServermgrdRegistration cannot load config data
Mar 4 10:54:38 TJBs-MacBook-Pro systemkeychain[61]: done file: /var/run/systemkeychaincheck.done
Mar 4 10:54:38 TJBs-MacBook-Pro UserEventAgent[11]: get_backup_share_points no AFP
Mar 4 10:54:38 TJBs-MacBook-Pro configd[14]: network configuration changed.
Mar 4 10:54:38: --- last message repeated 1 time ---
Mar 4 10:54:38 TJBs-MacBook-Pro mDNSResponder[35]: D2D_IPC: Loaded
Mar 4 10:54:38 TJBs-MacBook-Pro mDNSResponder[35]: D2DInitialize succeeded
Mar 4 10:54:38 TJBs-MacBook-Pro loginwindow[37]: Login Window Application Started
Mar 4 10:54:38 TJBs-MacBook-Pro rpcsvchost[86]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
Mar 4 10:54:39 TJBs-MacBook-Pro netbiosd[90]: Unable to start NetBIOS name service:
Mar 4 10:54:39 TJBs-MacBook-Pro airportd[65]: _doAutoJoin: Already associated to “9868LT1”. Bailing on auto-join.
Mar 4 10:54:40 TJBs-MacBook-Pro loginwindow[37]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Mar 4 10:54:40 TJBs-MacBook-Pro com.apple.launchctl.LoginWindow[99]: com.apple.findmymacmessenger: Already loaded
Mar 4 10:54:40 TJBs-MacBook-Pro airportd[65]: _doAutoJoin: Already associated to “9868LT1”. Bailing on auto-join.
Mar 4 10:54:40 TJBs-MacBook-Pro loginwindow[37]: Login Window Started Security Agent
Mar 4 10:54:40 TJBs-MacBook-Pro SecurityAgent[105]: Echo enabled
Mar 4 10:54:41 TJBs-MacBook-Pro WindowServer[85]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 4 10:54:41 TJBs-MacBook-Pro configd[14]: network configuration changed.
Mar 4 10:54:41 TJBs-MacBook-Pro UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
Mar 4 10:54:41 TJBs-MacBook-Pro UserEventAgent[11]: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
Mar 4 10:54:41 TJBs-MacBook-Pro UserEventAgent[11]: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on 9868LT1 because it is protected and not on the exception list
Mar 4 10:54:41 TJBs-MacBook-Pro UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
Mar 4 10:54:41 TJBs-MacBook-Pro configd[14]: network configuration changed.
Mar 4 10:54:47 TJBs-MacBook-Pro SecurityAgent[105]: User info context values set for MASTER
Mar 4 10:54:49 TJBs-MacBook-Pro SecurityAgent[105]: Login Window login proceeding
Mar 4 10:54:49 TJBs-MacBook-Pro loginwindow[37]: Login Window - Returned from Security Agent
Mar 4 10:54:49 TJBs-MacBook-Pro loginwindow[37]: USER_PROCESS: 37 console
Mar 4 10:54:49 TJBs-MacBook-Pro airportd[65]: _doAutoJoin: Already associated to “9868LT1”. Bailing on auto-join.
Mar 4 10:54:49 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Mar 4 10:54:49 TJBs-MacBook-Pro com.apple.launchctl.Aqua[130]: load: option requires an argument -- D
Mar 4 10:54:49 TJBs-MacBook-Pro com.apple.launchctl.Aqua[130]: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
Mar 4 10:54:49 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.launchctl.Aqua[130]): Exited with code: 1
Mar 4 10:54:49 TJBs-MacBook-Pro UserEventAgent[11]: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 14347
Mar 4 10:54:50 TJBs-MacBook-Pro talagent[137]: CoreDockMinimizeItems failed (-4959)
Mar 4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: Could not connect the action buttonPressed: to target of class NSApplication
Mar 4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: 2012-03-04 10:54:50.423 com.apple.dock.extra[147:1707] Could not connect the action buttonPressed: to target of class NSApplication
Mar 4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: Could not connect the action buttonPressed: to target of class NSApplication
Mar 4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: 2012-03-04 10:54:50.424 com.apple.dock.extra[147:1707] Could not connect the action buttonPressed: to target of class NSApplication
Mar 4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: Could not connect the action buttonPressed: to target of class NSApplication
Mar 4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: 2012-03-04 10:54:50.425 com.apple.dock.extra[147:1707] Could not connect the action buttonPressed: to target of class NSApplication
Mar 4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: Could not connect the action buttonPressed: to target of class NSApplication
Mar 4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: 2012-03-04 10:54:50.426 com.apple.dock.extra[147:1707] Could not connect the action buttonPressed: to target of class NSApplication
Mar 4 10:54:50 TJBs-MacBook-Pro coreservicesd[55]: *** process 55 exceeded 500 log message per second limit - remaining messages this second discarded ***
Mar 4 10:54:51 TJBs-MacBook-Pro Finder[139]: kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 28
Mar 4 10:54:51 TJBs-MacBook-Pro Finder[139]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 4 10:54:51 TJBs-MacBook-Pro Finder[139]: kCGErrorIllegalArgument: CGSRemoveSurface: Invalid window 0x1c
Mar 4 10:54:51 TJBs-MacBook-Pro Dock[136]: kCGErrorIllegalArgument: CGSSetWindowTags: Invalid window 0x1c
Mar 4 10:54:51 TJBs-MacBook-Pro Dock[136]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 4 10:54:51 TJBs-MacBook-Pro Dock[136]: kCGErrorIllegalArgument: CGSClearWindowTags: Invalid window 0x1c
Mar 4 10:54:51 TJBs-MacBook-Pro Dock[136]: kCGErrorIllegalArgument: CGSOrderWindowList
Mar 4 10:54:51 TJBs-MacBook-Pro talagent[137]: kCGErrorIllegalArgument: CGSGetWindowPresenter
Mar 4 10:54:51 TJBs-MacBook-Pro talagent[137]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 4 10:54:51 TJBs-MacBook-Pro talagent[137]: kCGErrorIllegalArgument: CGSOrderWindowListWithGroups: invalid window ID (28)
Mar 4 10:54:51 TJBs-MacBook-Pro talagent[137]: kCGErrorIllegalArgument: CGSOrderWindowList: NULL list pointer or empty list
Mar 4 10:54:51 TJBs-MacBook-Pro talagent[137]: CGSConnectionRelinquishWindowRights(cid, newWindowNumber, reservedRights): CGError 1001 on line 619
Mar 4 10:54:53 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] ([email protected][161]): Exited with code: 1
Mar 4 10:54:54 TJBs-MacBook-Pro com.apple.launchd.peruser.89[118] (com.apple.mdworker.pool.0): Throttling respawn: Will start in 4 seconds
Mar 4 10:54:55 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.mdworker.pool.0): Throttling respawn: Will start in 3 seconds
Mar 4 10:54:53 TJBs-MacBook-Pro ntpd[21]: proto: precision = 1.000 usec
Mar 4 10:55:06 TJBs-MacBook-Pro coreservicesd[55]: *** process 55 exceeded 500 log message per second limit - remaining messages this second discarded ***
Mar 4 11:00:28 TJBs-MacBook-Pro firefox[219]: -_scrollPhase is deprecated for NSScrollWheel. Please use -momentumPhase.
Mar 4 11:00:28 TJBs-MacBook-Pro firefox[219]: -_continuousScroll is deprecated for NSScrollWheel. Please use -hasPreciseScrollingDeltas.
Mar 4 11:00:28 TJBs-MacBook-Pro firefox[219]: -deviceDeltaY is deprecated for NSScrollWheel. Please use -scrollingDeltaY.
Mar 4 11:00:28 TJBs-MacBook-Pro firefox[219]: -deviceDeltaX is deprecated for NSScrollWheel. Please use -scrollingDeltaX.I was able to identify the cause. Wrote in this thread the solution:
http://discussions.apple.com/message.jspa?messageID=13160082#13160082 -
Why can't I send any more than 5 TCP messages per second on an NT system?
Help!
I am trying to send a message (approximately 50 bytes long) every 22 ms (45.4 Hz) to the only other machine on our network (the server). I am using the following function:
Status = ClientTCPWrite(Conversation_Handle, Pointer_to_the_data, Size_of_the_data, Timeout_value);
I have tried various values (0, 1, & 10) for the Timeout value to no avail. The status always comes back saying it wrote fine (no error status). I am running this application on Windows NT 4.0. No matter what I have tried it can only muster about 5 messages per second. I think NT might be limiting me, but I'm not sure. I am updating the screen (which ought to take longer than writing the messa
ge) every time I send with a count of how many messages I have sent. This appears to be working at the proper rate (I am using a timer set to go off every 0.022 seconds to call the send). I am the administrator on this NT machine with all rights (as far as I can determine). I have tried using the SDK function SetPriorityClass to set the priority of this task to REALTIME_PRIORITY_CLASS, but the return value comes back 0, which means it was unsuccessful. I haven't explored this any further yet, but 22ms should be a long time to a computer so it ought to work without having to go to these extraordinary measures (at least that is what I think). Anybody familiar with the inner workings of NT or the TCP library PLEASE RESPOND.
Thanks,
Greg Filis
[email protected]22ms is a long time for your computer, but I am wondering about your network. Are you 10 base or 100 base? Switch or hub? Have you tried a direct connection with a crossover cable? Just trying to spark ideas here. I use TCP all the time but only at 500 ms intervals.
-
I was today invited to upgrade my iTunes when I logged on. Update failed. Every time I now try to open iTunes I get error messages. Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126". I now can't sync my iPhoneand I am worried that if I re-install I will lose all my contacts,calendar, notes, etc.
I too had this problems (Windows 8.1). A few weeks ago after the previous update before this version of itunes, I'd had a problem with the itunes store crashing and at that time I followed instructions to copy QTMovieWin.dll to the itunes folder, which fixed the store crashing.
Today I fixed the problem by:
Delete QTMovieWin.dll from C:\Program Files (x86)\iTunes.
Uninstall ALL Apple Software using Control Panel / Programs and Features. I uninstalled:
iTunes
QuickTime
Apple Mobile Device Support
Apple Application Support
Apple Software Update
Bonjour
Delete the folders:
C:\Program Files (x86)\iTunes
C:\Program Files (x86)\Common Files\Apple
Restart the computer
Reinstall QuickTime
Reinstall iTunes
Everything works GREAT now, including the iTunes store. You will not lose your media files, I got everything back, all my settings, playlists, etc. -
Two Sites Published With iWeb...Viewers Get Error Message With Second Site
I have used iWeb to create two web sites. I believe I have done so properly, using File>New Site to begin creating the second site. After publishing, I can visit both sites from within iWeb.
Curiously, the message panel that displays after successful publishing indicates the same URL for both web sites. Obviously, that's wrong. That address will open the first site properly (after automatically adding additional characters to the URL during opening), but is incorrect for the second site. As an alternative, I have visited both sites from within iWeb, and copied the URL from the browser window as the "proper" address.
When I use the copied URL's in my own browser, I can navigate to each of the websites properly. However, when I give those URL's to someone else, they get an error message that the second site cannot be found using the URL for the second site that I obtained using the "copying" technique described. That's the case even though both URL's work properly from my computer and browser.
Any suggestions as to what might be wrong?
Desktop G4 Mac OS X (10.4.4)Fred:
Mount your iDisk and go to the iDisk/Web/Sites folder and delete your friend's site folder that's there. The example below shows many site folders in the Sites folder.
Click to view full size
OT -
Can anyone help with an error message 4f:04. Is it serious?
Can't find any information on that specific error. Here's the document on error codes for this printer;
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00003337&jumpi...
If you print out a config page, or any other internal page that lists the errors stored in memory, are there other errors occuring at the same time? If you run the service tests, do any of them fail?
insert signature here -
I am in Mavericks disk utility recovery mode as my mac book pro will not boot up & stays on the Apple grey screen . When I verify disk permissions I get
Open error 5:"input/ output error" on syst with over 50 of this messages & still counting . Disk Utility says 1 minute
But this has been going on for over 10 mins .
I can not verify disk or repair disk .
I have tried to reinstall mavericks operating system but it says my hard drive is locked which is very strange .
Does anyone know what is going on here ?
My system looks like it has been totally corrupted . Thanks AndrewCould be. The "lock" isn't actually looking for a password.
WARNING: This will completely erase the ENTIRE hard drive.
What you would need to do is boot to recovery > disk utility > select the MAIN drive on the left side > partition > change partition layout from CURRENT to 1 PARTITION > ensure on the right side it says Format : Mac OSX Extended (Journaled) then push APPLY.
Then if it will allow us, close the windows until you see the 4 options popup again and select "Reinstall Mac OS X" select the Mac HD and you should be good to go! -
Tomcat 4.1.24 returns random 500 error messages
hi all,
i've got a big problem with my tomcat 4.1.24 in connection with apache 2.0.46 on windows 2000 server.
when surfing through the website tomcat returns after some pages an internal server error:
"...500 The server encountered an internal error that prevented it from fulfilling this request."
But not all users get this error! when restarting the server it works (for a certain time)
Please help me! we want to go live!
b.r. dajokeStill smells like a recourse leak, even more so now that you know it works better if Tomcat isn't running in-process with Apache (which would reduce the memory space available to Tomcat).
Check whether you have database connections you're not closing, objects that are left to swing in the wind with no reference to them, etc.
We encountered something similar once and that was the problem.
The system would always hang without apparent reason on or about the same amount of time after startup. Turned out someone had forgotten to close a database connection and Oracle was refusing access until they timed out (with the timeout set to something like half an hour, and sessions lasting maybe 5 minutes). First the sysadmins tried installing more Oracle licenses, this increased the time between hangs (surprise surprise).
When I came in and suggested they look at their database access code they were I think planning to format and reinstall an HP9000 machine in the hope that might do something. -
Slow response - but over 500 activities per second doing something!
Hi. I'm having trouble with my iMac running slowly with lots of hangs. The system.log.7.bx2 is showing the following activity apparently over 500 times per second!
Apr 24 11:15:12 kelvin-08e2b175 sandboxd[7358]: mDNSResponder(19) deny file-read-data /private/var/db/com.apple.parentalcontrols.keychain.jZOTiS
* process 7919 exceeded 500 log message per second limit - remaining messages this second discarded *
I've checked the parental controls and they are all off except possibly for the Guest login which seems to show it as the default.
There's also a line saying something about a slow response on refreshing the log as follows -
Apr 25 00:31:23 kelvin-08e2b175 configd[14]: Kernel configd com.apple.powermanagement.applicationresponse.slowresponse 6960 ms
Can anybody give me a pointer as to what could be wrong? Many thanks. KevMacintosh HD:
Capacity: 297.29 GB (297,292,267,520 bytes)
Available: 204.04 GB (204,044,525,568 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: / -
Error message appears only for a short time
An error message appears only for a very very short time so i can't read it. Sometimes the message appers directly after log in, and sometimes after using the mac for a longer time. So What should i do?
Thank you for the fast reply.
This is the log of the last start. The message appeared directly after login.
06.03.12 21:37:47,000 bootlog: BOOT_TIME 1331066267 0
06.03.12 21:38:00,000 kernel: PMAP: PCID enabled
06.03.12 21:38:00,000 kernel: Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
06.03.12 21:38:00,000 kernel: vm_page_bootstrap: 2003650 free pages and 77118 wired pages
06.03.12 21:38:00,000 kernel: kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]
06.03.12 21:38:00,000 kernel: zone leak detection enabled
06.03.12 21:38:00,000 kernel: standard timeslicing quantum is 10000 us
06.03.12 21:38:00,000 kernel: mig_table_max_displ = 73
06.03.12 21:38:00,000 kernel: TSC Deadline Timer supported and enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
06.03.12 21:38:00,000 kernel: calling mpo_policy_init for TMSafetyNet
06.03.12 21:38:00,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
06.03.12 21:38:00,000 kernel: calling mpo_policy_init for Sandbox
06.03.12 21:38:00,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
06.03.12 21:38:00,000 kernel: calling mpo_policy_init for Quarantine
06.03.12 21:38:00,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
06.03.12 21:38:00,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
06.03.12 21:38:00,000 kernel: The Regents of the University of California. All rights reserved.
06.03.12 21:38:00,000 kernel: MAC Framework successfully initialized
06.03.12 21:38:00,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
06.03.12 21:38:00,000 kernel: IOAPIC: Version 0x20 Vectors 64:87
06.03.12 21:38:00,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
06.03.12 21:38:00,000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
06.03.12 21:38:00,000 kernel: [ PCI configuration begin ]
06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagement: Turbo Ratios 6689
06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagement: (built 18:56:37 Jan 12 2012) initialization complete
06.03.12 21:38:00,000 kernel: console relocated to 0xf10010000
06.03.12 21:38:00,000 kernel: PCI configuration changed (bridge=16 device=5 cardbus=0)
06.03.12 21:38:00,000 kernel: [ PCI configuration end, bridges 12 devices 18 ]
06.03.12 21:38:00,000 kernel: mbinit: done [96 MB total pool size, (64/32) split]
06.03.12 21:38:00,000 kernel: Pthread support ABORTS when sync kernel primitives misused
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagementClient: ready
06.03.12 21:38:00,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffebc9f3e; max speed s800.
06.03.12 21:38:00,000 kernel: BTCOEXIST off
06.03.12 21:38:00,000 kernel: wl0: Broadcom BCM4331 802.11 Wireless Controller
06.03.12 21:38:00,000 kernel: 5.100.98.75
06.03.12 21:38:00,000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
06.03.12 21:38:00,000 kernel: rooting via boot-uuid from /chosen: C48C5E4E-3694-3F9E-87F9-351F848CEC3F
06.03.12 21:38:00,000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
06.03.12 21:38:00,000 kernel: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
06.03.12 21:38:00,000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST9500325ASG Media/IOGUIDPartitionScheme/Customer@2
06.03.12 21:38:00,000 kernel: BSD root: disk0s2, major 14, minor 2
06.03.12 21:38:00,000 kernel: Kernel is LP64
06.03.12 21:37:49,176 com.apple.launchd: *** launchd[1] has started up. ***
06.03.12 21:37:59,329 com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
06.03.12 21:38:04,363 com.apple.pfctl: No ALTQ support in kernel
06.03.12 21:38:04,363 com.apple.pfctl: ALTQ related functions disabled
06.03.12 21:38:04,389 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
06.03.12 21:38:05,090 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
06.03.12 21:38:05,092 UserEventAgent: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 12039
06.03.12 21:38:05,092 UserEventAgent: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
06.03.12 21:38:05,265 UserEventAgent: CertsKeychainMonitor: configuring
06.03.12 21:38:06,000 kernel: Waiting for DSMOS...
06.03.12 21:38:06,000 kernel: BCM5701Enet: Ethernet address 40:6c:8f:00:09:d9
06.03.12 21:38:06,000 kernel: AirPort_Brcm4331: Ethernet address 68:a8:6d:4b:27:58
06.03.12 21:38:06,000 kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
06.03.12 21:38:06,000 kernel: IO80211Interface::efiNVRAMPublished():
06.03.12 21:38:07,000 kernel: AGC: 3.0.16, HW version=1.9.23, flags:0, features:20600
06.03.12 21:38:07,000 kernel: Previous Shutdown Cause: 3
06.03.12 21:38:08,000 kernel: DSMOS has arrived
06.03.12 21:38:08,000 kernel: ** Device in slot: SLOT--1 **
06.03.12 21:38:08,869 com.apple.SecurityServer: Session 100000 created
06.03.12 21:38:09,849 mds: (Normal) FMW: FMW 0 0
06.03.12 21:38:10,000 kernel: macx_swapon SUCCESS
06.03.12 21:38:10,622 airportd: _processDLILEvent: en1 attached (down)
06.03.12 21:38:10,623 mDNSResponder: mDNSResponder mDNSResponder-320.14.0 (Nov 16 2011 01:16:56) starting OSXVers 11
06.03.12 21:38:10,641 com.apple.usbmuxd: usbmuxd-263 on Nov 14 2011 at 18:58:10, running 64 bit
06.03.12 21:38:10,000 kernel: Created virtif 0xffffff8014af6e00 p2p0
06.03.12 21:38:10,000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
06.03.12 21:38:10,654 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
06.03.12 21:38:10,654 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06.03.12 21:38:10,663 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06.03.12 21:38:11,283 configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
06.03.12 21:38:11,283 configd: DHCP en1: INIT-REBOOT transmit failed
06.03.12 21:38:11,304 configd: setting hostname to "Saschas-MacBook-Pro.local"
06.03.12 21:38:11,308 configd: network configuration changed.
06.03.12 21:38:13,000 kernel: en1: 802.11d country code set to 'DE'.
06.03.12 21:38:13,000 kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
06.03.12 21:38:15,057 com.apple.SecurityServer: Entering service
06.03.12 21:38:15,080 systemkeychain: done file: /var/run/systemkeychaincheck.done
06.03.12 21:38:15,090 configd: network configuration changed.
06.03.12 21:38:15,091 configd: network configuration changed.
06.03.12 21:38:15,192 mDNSResponder: D2D_IPC: Loaded
06.03.12 21:38:15,192 mDNSResponder: D2DInitialize succeeded
06.03.12 21:38:15,217 UserEventAgent: ServermgrdRegistration cannot load config data
06.03.12 21:38:15,220 UserEventAgent: get_backup_share_points no AFP
06.03.12 21:38:15,000 kernel: MacAuthEvent en1 Auth result for: bc:05:43:a0:ff:1d MAC AUTH succeeded
06.03.12 21:38:15,000 kernel: wlEvent: en1 en1 Link UP
06.03.12 21:38:15,000 kernel: AirPort: Link Up on en1
06.03.12 21:38:15,000 kernel: en1: BSSID changed to bc:05:43:a0:ff:1d
06.03.12 21:38:15,000 kernel: AirPort: RSN handshake complete on en1
06.03.12 21:38:15,632 rpcsvchost: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
06.03.12 21:38:15,696 netbiosd: Unable to start NetBIOS name service:
06.03.12 21:38:17,000 kernel: AppleBCM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?
06.03.12 21:38:17,595 configd: network configuration changed.
06.03.12 21:38:17,596 ntpd: proto: precision = 1.000 usec
06.03.12 21:38:17,727 configd: setting hostname to "saschas-macbook-wlan.fritz.box"
06.03.12 21:38:17,755 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
06.03.12 21:38:17,755 UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
06.03.12 21:38:17,774 UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on Compound_Blank_10 because it is protected and not on the exception list
06.03.12 21:38:17,777 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
06.03.12 21:38:17,778 configd: network configuration changed.
06.03.12 21:38:17,891 loginwindow: Login Window Application Started
06.03.12 21:38:18,000 kernel: AppleLMUController found an AG vendor product (0x9cb7), notifying SMC.
06.03.12 21:38:22,191 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
06.03.12 21:38:22,719 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
06.03.12 21:38:22,894 airportd: _doAutoJoin: Already associated to “Compound_Blank_10”. Bailing on auto-join.
06.03.12 21:38:22,948 com.apple.SecurityServer: Session 100005 created
06.03.12 21:38:22,950 loginwindow: Login Window Started Security Agent
06.03.12 21:38:23,023 SecurityAgent: Echo enabled
06.03.12 21:38:23,023 SecurityAgent: Echo enabled
06.03.12 21:38:23,702 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
06.03.12 21:38:29,733 SecurityAgent: User info context values set for Sascha
06.03.12 21:38:29,733 SecurityAgent: User info context values set for Sascha
06.03.12 21:38:30,733 SecurityAgent: Login Window login proceeding
06.03.12 21:38:30,733 SecurityAgent: Login Window login proceeding
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | name = Sascha, path = /Users/Sascha, homeLoc = (null)
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter setNeedsToUnmountDirVolumeAtLogout:] | mounter calling mechanism to setNeedsToUnmountDirVolumeAtLogout to 0
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | urlAttribute = null
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | homeDirPath did NOT follow a symlink, keeping original path of: /Users/Sascha
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | homeDirMajorType = 1
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountStandardDirectoryForUser:atPath:attributes:] | name = Sascha, path = /Users/Sascha, homeLoc = (null)
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMechanism isGuestAccount] | enter
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMechanism isGuestAccount] | Guest account check returning 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter setHomeDirType:] | setHomeDirType to 1
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter mountStandardDirectoryForUser:atPath:attributes:] | returning 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | returning 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism invoke] | mountHomeDirectoryForUser returns 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism updateAndUnlockKeychain] | updateAndUnlockKeychain
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism launchHomeDirFixerToolIfNeeded:] | launchHomeDirFixerToolIfNeeded called with 0
06.03.12 21:38:31,286 loginwindow: Login Window - Returned from Security Agent
06.03.12 21:38:31,308 loginwindow: USER_PROCESS: 37 console
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.AddressBook.PushNotification': unknown error code
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.safaridavclient.push': unknown error code
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.syncdefaultsd.push': unknown error code
06.03.12 21:38:31,379 airportd: _doAutoJoin: Already associated to “Compound_Blank_10”. Bailing on auto-join.
06.03.12 21:38:31,486 com.apple.launchd.peruser.501: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
06.03.12 21:38:31,676 com.apple.launchctl.Aqua: load: option requires an argument -- D
06.03.12 21:38:31,676 com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
06.03.12 21:38:32,033 UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 25095
06.03.12 21:38:33,566 com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[131]) Exited with code: 1
06.03.12 21:38:33,691 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,691 com.apple.dock.extra: 2012-03-06 21:38:33.689 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,691 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,691 com.apple.dock.extra: 2012-03-06 21:38:33.691 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: 2012-03-06 21:38:33.691 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: 2012-03-06 21:38:33.692 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:35,005 appleprofilepolicyd: appleprofilepolicyd: profiling drivers not loaded, loading
06.03.12 21:38:35,044 com.apple.launchd.peruser.501: (com.facebook.videochat.Sascha.updater[173]) Tried to setup shared memory more than once
06.03.12 21:38:35,671 UserEventAgent: [11] error in getAndLockContext: open returned -1 (errno=2) file was /private/var/servermgrd//servermgr_certs.lock
06.03.12 21:38:35,673 UserEventAgent: [11] error in getAndLockContext: open returned -1 (errno=2) file was /private/var/servermgrd//servermgr_certs.lock
06.03.12 21:38:35,673 UserEventAgent: CertsKeychainMonitor: ready to process keychain & timer events
06.03.12 21:38:36,318 com.apple.launchd.peruser.501: (*****-SharedServices[174]) Exited with code: 1
06.03.12 21:38:36,711 Firewall: java is listening from ::ffff:0.0.0.0:0 proto=6
06.03.12 21:38:49,925 coreservicesd: *** process 57 exceeded 500 log message per second limit - remaining messages this second discarded *** -
HTML DB Color Error message in a field - how to set them
Hi everyone,
I want to know where I can set the color of an error message in a field ?
In our page model, on an required field: the message is black
and on an optional field: the message is red.
I want both of them red.
Thank you. Bye.Hi Carl,
I have a similar issue. I am using Theme 20 and error messages per item as well as page level error messages are coming up in Blak. Is there a way to show them in Red?
Thanks,
Bhavesh -
Hi All
I am using a web service to feed my flex application with
data. When exceptions occur in the web service, I only get some
generic error message in my fault handler. I would like to be able
to get information such as error messages from the web service
exceptions propagated to my web service fault handlers in my Flex
Application.
My web service is .Net based/C# and it is used in my Flex app
by importing the WSDL file of the service.
Here is an example with some code snippets:
The web service has a HelloWorld webmethod which throws an
exception. This webservice is imported into my flex app using the
Data->Import Webservice feature, which autogenerates the
webserivce class I am using. When I call the webservice from Flex,
the fault handler is called but it only contains some generic error
message.
Code snippets: The C# webservice method which throws an
exception:
[WebMethod]
public string HelloWorld()
throw new Exception("Hello World Exception.");
return "Hello World";
And here is how I call the webservice in my FIex App:
private function btnTestWebserviceClicked(event:Event):void
var service:WebService = new WebService();
service.addWebServiceFaultEventListener(faultHandler);
service.addhelloWorldEventListener(webMethodDone);
service.helloWorld();
function webMethodDone(event:HelloWorldResultEvent):void
Alert.show("Done", "Done");
function faultHandler(event:FaultEvent):void
Alert.show(event.fault.faultString, "Error");
The information I can get from the faultEvent passed to the
fault handler does not contain the error string but only the
generic "HTTP request error" error message, and not the
“Hello World Error String” which was passed to the
exception thrown in the webservice.
So my question is: How can I get information from web service
exceptions propagated to my fault handlers in Flex?
Any help, advice or pointers to articles will be much
appreciated.
Best regards Stig NielssonHi Stig,
The root cause of the problem is that the body of the 500
status code isn't returned to the flash player from the browsers.
This prevents the Flash Player from passing it along to you. Keep
in mind that the FlashPlayer is just a control that runs within the
browser; as a result it's restricted by what the browser provides
to it. The body of a 500 error message isn't one of the things
provided to it.
The Flash Player needs to play to the least common
denominator and while some browsers do provide the web service's
500 error body the Flash Player requires ubiquity. This is why the
feature isn't implemented within the Flash Player... when all
browsers provide this data then Adobe needs to add the feature.
Adobe has logged a bug on these issues with the browser companies.
To workaround the issue use LCDS or BlazeDS as proxies. They
have been coded to return a 200 status response instead of the 500
error allowing you to access the error message. Adobe has been
aware of this issue and this is the suggested resolution to the
problem. It's not ideal but it's the best we currently have
available.
Here's a great article that talks about this:
http://blog.flexmonkeypatches.com/2008/05/16/soap-fault-messages-in-flexflash-player-error -2032-stream-error/
-Kurt. -
Solve error message when uploading to youtube
Does anyone know how to upload videos to youtube? I never had a problem with the Premiere Elements 11, but on Premiere Elements 12, I get an error message that is not very helpful. I've scoured every online forum I can think of for an answer and cannot locate anything useful to get over this error message.
Janaschmidt
What computer operating system is your Premiere Elements 12 running on?
How do you upload content to YouTube
a. For 12, Publish+Share/Social Websites/YouTube which preset
or
b. For 12, Publish+Share/Computer/and a choice such as AVCHD to export to file saved to the computer hard drive, followed by uploading that saved file to YouTube at the YouTube web site.
or
c. Both
How far do you get in the process? And when specifically in that process does the error appear? Have you tried "a" and "b" cited above? Does "b" work while "a" does not.
What exactly is on the Premiere Elements Timeline in the way of content and content duration? Are you over 15 minutes in content duration?
Please supply the above information and let us know if "b" as a troubleshooting tool works for you.
Thank you.
ATR
Maybe you are looking for
-
USB2 doesn't work. Only USB3 work.
Hello, I've a new DELL vostro 3350 with 2 usb2 and one usb3/e-sata connector but only the last seem working, the other 2 port doesn't work like they doesn't exist. i post my dmesg and lsmod output dmesg: [ 0.000000] Initializing cgroup subsys cpuset
-
well that woked for an hour, then :O what else to do?
-
UnsatisfiedLinkError - NotesFactory.createSession
Hi, I try to export data from Lotus Notes with the help of the lotus.domino.*-files (notes.jar). When creating a new Session-Object (Session s = NotesFactory.createSession();) I get an "unsatisfiedLinkError"........ Can anybody help me? Thanks a lot.
-
Entourage constantly says "now updating calendar"
I'm on a new MBP with Snow Leopard 10.6 using Entourage 2008 (using Exchange), and the calendar constantly says "Now updating Calendar." Mail is fine, calendar is not. The problem is, it is not syncing calendar items added/edited from my iPhone or f
-
Table row updated by rowid but not with rownum.
May i know why a table is not getting update when a row specified by rownum and getting updated when row specified by rowid. SQL> update emp1 set name='ddd' where rownum = 2; SQL> / 0 rows updated. SQL> update emp1 set name='ddd' where rowid='AAJD/dA