Over and over again: port scan TCP issuing from my mac. How can I stop this
I have set our router to send me an alarm whenever it is attacked.
I have noticed before that when I use Google Maps, Google Earth, Google's Picasa my mac attacks other IP's with a port scan TCP.
As of this morning my mac has startet to attack our router about every minute, and none of the above applications ist running.
How can I get this to stop?
I'm experiencing a similar issue with some of the systems I support at a University. One was issuing tons of outbound ICMP requests to address 0.0.0.0 and another was port scanning a (seemingly) random name server. The systems themselves are behind a pretty aggressive firewall, as far as inbound traffic goes. Any thoughts?
Similar Messages
-
I have iphone 4 and the birthdays on facebook keep posting on my calendar how can I stop this?
I have iphone 4 and the birthdays on facebook keep posting on my calendar how can I stop this?
Open calender, on the top left open calenders, and then uncheck birthdays on the bottom.
-
On the new version of iTunes the shuffle button and replay buttons appear to have disappeared on the genius tab and am always having to listen to shuffled songs now :( how can I stop this?
It appears from many other posts that the " Keep This iPod in the Source List" function isn't included in iTunes 7 unfortunately. You can leave your feedback on it's absence at this link: Apple Product Feedback
You can check out a workaround at this link which may help out for now: Create ready-to-sync playlists for Shuffles in iTunes 7 -
A rectangle box come up sometimes when I boot up my computer, it says, Are you sure you want to shut down your computer now? and has four boxes Restart, Sleep,Cancel and Shut Down. How can I get rid of this annoying occurance?
That box is normally invoked with Control-Eject.
-
Setting up a new iMac and importing 1000's of pic's from various backup sources.
Right now I have about 5700 images trying to download into Photostream as soon as I turn it on on the iMac
I've tried logging into icloud.com and clicking my username to go to the "advanced" setting but the advance button is gone!
Any suggestions? I still have a lot of pics to upload
Thanks in advanceGo to iPhoto's Photo Stream preference pane and uncheck the Automatic Upload checkbox.
Then close and reopen iPhoto.
OT -
Work Offline is always checked when I log in to my laptop. I have to uncheck it to get to the internet. I don't usually want to work offline so this is very annoying
You can try this:
Create a new Boolean pref with the name <b>network.manage-offline-status</b> and set the value to false.
Right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean pref.
Name: <b>network.manage-offline-status</b>
Value: <b>false</b>
See also:
* http://kb.mozillazine.org/about%3Aconfig -
Since downloading Yosemite, Safari will close itself out, when I reopen it all of my pages are gone. How do I stop this from happening?
But if iit won't stay open, then it's quitting unexpectedly which is the same as a crash.
There has to be a reason for that which a crash report should reveal.
Check ~/Library > Logs > Diagnostic Reports -
Everytime I plug my phone into to sync, Itunes starts downloading the same rented movie over and over. I go in and delte it from my library but it does it again. How can I stop this from happening?
The sort fields should generally be empty unless you've putting in custom values to sort solo artists by their surnames. You can apply common changes to thousands of tracks at once, just don't apply the wrong change because there is no undo.
It is a good idea to backup before undertaking large scale changes. See this backup tip for a suggested approach.
tt2
Message was edited by: turingtest2 -
Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?
There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested. -
My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?
Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.
-
Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?
Ok, look at your files in Photoshop. What is the profile assigned to them? You can find this out by going to the Status bar at the bottom, clicking on the right-pointing triangle and choosing document Profile from the list.
Then in Windows, go to your Control Panel > Color Management and add sRGB (if it isn't there) and select it as your default profile.
I hope that will work. -
Hi, I am using "Avenir Heavy" font in my iOS 6 app but when I run it on iOS5 the label on which I am placing Avenir fonts changes lot and I am not getting proper look n feel. How can I solve this issue ?
Post your question on the Developer forums: http://devforums.apple..com
-
I cannot shut down my iMac (for days now) as I get the following message: "Photos are being imported to the photo library."
Now as far as I know there are no photos being imported and even if there were 5 days is crazy. How can I resolve this please?
JLB284Open Activity monitor in Utilities, go to the CPU tab>All Processes, and note any process that would appear to be related to importing photos, such as iPhoto, and use Force Quit. This may only be a temporary fix, as it may start all over again when you reboot. If that happens, we need to do some more investigating.
Also, close all open Applications, then open Terminal in Utilities and copy/paste and hit return, then post the output of this command.
lsof -l +L -R -V | grep / -
I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anywayOn Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
But there is a plugin for ID that makes this possible. Never tried it myself.
https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/ -
I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?
DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.
Maybe you are looking for
-
Get Map As XML/Server Image returns blank image on server and errors out on local
In Server, map.getMapAsXML and map.getMapAsServerImage both return blank images though they return a valid url In local, executing map.getMapAsXML reports the following error: Uncaught SecurityError: Failed to execute 'toDataURL' on 'HTMLCanvasElemen
-
Delivery from the project stock
Dear experts, Kindly suggent me for the below scenario... My client wants to procure the goods from the project stock. The goods must be issued from the Project stock. I am creating sales order and assigning the WBS element in the account assignment
-
Upgrade issue of transaction FVZA in ECC 6.0
Hi , When I execute the transaction FVZA, it is displaying the error "This program is old and is not part of the standard system." Any suggestion on this. Regards, Sree
-
Is there any Best Practice Document for OEDQ development?Please share.
Is there any Best Practice Document for OEDQ development?Please share.
-
just wanna know if, when I buy a laptop, I can install my master collection too it?