Over delivery Tolerance for specific customers

hi, in shipping tab in XD02, i have entered 20% in "OverDelivert Tolerance" field. but still, the system is alowing to make the delivery quantity more than 20% than in Sales order quantity.
the requirement is, if ordered quanitity is let say 100 Ea, then customer's delivery order must not accept more than 120 EA (meaning 20% over tolerance). hows that possible.
experts..please comment.
thanks.

Hi there,
For this you will have to write a code in delivery USEREXIT_SAVE_DOCUMENT in prog SAPMV50A. Check if the LIPS-LFIMG >= 120% VBAP-KWMENG. If yes, then donot allow save. Hope this helps.
Or you can use KNVV-UEBTO to check the over delivery tolorence & then compare LIPS-LFIMG with VBAP-KWMENG. To get KNVV, pass the value of delivery into VBPA-VBELN to get the value of PARVW=AG. Then pass the value of VBPA-PARVW into KNVV-KUNNR to get KNVV-UEBTO.
Likewise to get the relevant sales order for the delivery, pass delivery num into VBFA-VBELN. Sales order is stored in VBFA-VBELV.
Regards,
Sivanand

Similar Messages

  • Over Delivery Tolerance for schedule agreements

    Hi,
    we have overdelivery tolerance of 10%  in schedule agreement and system is allowing to do GR for more the the over delivery tolerance.
    can any one tell me how to get the error message while doing GR for more than the over delivery tolerance in case of schedule agreements.

    See OSS Note 874264 - MB01/MIGO: Default quantity for goods receipt posting
    3. The basis used for calculating the over or under delivery tolerance is the quantity ordered, in case of purchase orders, and the suggested quantity, in the case of scheduling agreements. If you want the system response to be the same for scheduling agreements as it is for purchase orders (that is, you need more generous tolerances) see also the SAP Consulting Note 741385.
    For items with a confirmation control key, the basis for the calculation of the over or under delivery tolerance is the quantity ordered or the total of the schedule line quantities.

  • Uder delivery and over delivery tolerance....for matl

    Hi,
    Is it possible to maintain uder and over delivery tolerance for matl. If yes then please explain how?
    I will award for each points.
    regards,
    Imran Shek

    Hi,
    At Material master level:
    1. Maintain under delivery / over delivery tolerance in percentage in Material master Work scheduling view. U can use the indicator Unlimited instead of Over delivery tolerance if needed. (Indicator that specifies whether the quantity actually delivered may infinitely exceed the required production order quantity)
    At production order level:
    2 . Maintain Under delivery / Over delivery tolerance in percentage in Production Order Goods receipts tab for Finished/semi finished material.
    Customization settings to get warning message:
    In customization, OPK4(Parameters for Order confirmation), for the plant and order type, maintain Warning when Quantity falls below Under delivery tolerance and Warning when Over delivery tolerance is Exceeded.
    By these settings you can able to give over delivery quantity and System prompts you whether this quantity is within the specified delivery tolerance or not with Warning message.
    But If Delivery tolerance is varying from order to order it is suggestible to have the same settings at order level.
    Hope this clears all your doubts.
    Regards
    Venkat

  • Service Master over delivery tolerance

    Hi
    Is it possible to maintain over delivery tolerance for service master ( when I create service PO/PR there should be over delivery tolerance say 10% copied automatically from master data - user doesnt want to maintain it manually in every order). Is there any BADI available for this? Any Suggestions...
    Thanks
    Edited by: Praveen Raghavendra on Jul 27, 2009 11:56 AM

    Hi,
    you could check the BADI's MMSRV_SM_BAPI_CUST or MMSRV_SM_MAIN or the user exits EXIT_SAPLBAS0_800 and EXIT_SAPLBAS0_810.
    Regards,
    Edit

  • Extenet the communication structure CEKKO for over delivery tolerance

    Hi Boss,
    I like to set the Purchase order release strategy based on the over delivery tolerance. But when i checking, the over delivery tolerance filed UEBTO is not in the communication structure CEKKO. Can you please help me how should i extend the CEKKO with field UEBTO.
    I do not have the ABAP experience, please guide me with coding.
    Thank you,
    Siva

    There are lot of fields which can be set as Charecteristics for Release Strategy. I dont know why you want to Set the Over delivery Tolerance as Charecterisitic.
    What is your Requirment??
    Any way You can also use CEKKOZZ Communication Structure: PO release for User Exit
    Go thru the Link which will guide you
    http://help.sap.com/saphelp_40b/helpdata/en/dd/2d547bb435d1118b3f0060b03ca329/content.htm

  • Delivery order for over delivery tolerance : SD module

    Hi there,
    i have a scenario and an abap enhancement is required by the client.The scenario is as below :
    i have a sales order with 1 line item which has delivery quantity of 5000 (5.0 over delivery and under delivery tolerance).With the over delivery tolerance,i have an amount of 5250 which can be delivered. When i create a delivery order of 5000 items,it is fine.but after that,when i want to create another delivery order to for the remaining 250 ( which came from the over delivery tolerance) i am unable to create the delivery order.
    What can i do to enable me to create the delivery order in this case.Need help.The client which im working on wants to maximize the sales by doing this enhancement.I previously was playing around with the vbuk status flags but it did not work. Please help me.
    Thanks in advance.

    Hi Nite,
    I think this is the standard.If you are not able to manually then how come it is possible with either bapi or with some enhancement.What i am going suggest you is please post in sd forums and check the responses.
    Regards,
    Madhu.

  • Over delivery tolerance value while creating delivery document

    Dear Gurus,
    I need your help for the below scenario,
    I have created a sales order for 25000 TO, Over delivery tolerance is 10 %.So logically speaking I can dispatch 27500 MT material.
    I have created 3 deliveries as below,
    1st delivery for 23500 TO
    2nd delivery for 1480 TO
    3rd delivery for 50 TO
    That means if i see sales order at item level schedule line will show confirmed qty as 25000 TO,and delivered qty as 25030 TO.
    Now I am trying to create one more delivery since over delivery tolerance is 10 % but system is not allowing me to create delivery and throwing an error saying
    No delivery-relevant items in order 0025000281, order type ZEOR
    If i check the long text it is as below,
    No delivery-relevant items in order 0025000281, order type ZEOR
        Message no. VL455
    Diagnosis
        The sales order you want to deliver, sales order 0025000281 with orde
        type ZEOR, either contains no delivery-relevant items or its
        delivery-relevant items have already been delivered.
    Am i missing any IMG setting or this delivery tolerance value will be considered only for the last delivery,I mean once it exceeds 25000 TO system will not allow to create further deliveries even if it is not touched 27500 TO
    Thanks in advance.
    Regards,
    Shrikant

    Your system behaviour is correct and you can change this to warning message.  Go to zeroVLP, select your item category and maintain "A" for the field "Check overdelivery".  Presently, it should have been "B"
    thanks
    G. Lakshmipathi

  • Purchase order release strategy based on over delivery tolerance level

    Hi Boss,
    I like to set the Purchase order release strategy based on the over delivery tolerance. But when i checking, the over delivery tolerance filed UEBTO is not in the communication structure CEKKO. Can you please help me how should i extend the CEKKO with field UEBTO.
    I do not have the ABAP experience, please guide me with coding.
    Thank you,
    Siva

    Hi Siva:
    You should request the development key for this structure under your SAP system, then you can add the extra fields in CEKKO.
    Good luck
    Z.T

  • Under & Over Delivery Tolerance.........

    Hi there ,
                   I have maintained the Under & over delivery tolerance of the material in the work scheduling view....... but when I am creating the Process Order of the material...... in the goods recipt view in Process order it is still showing me zero percentage as Under & Over Delivery Tolerance
    Do I have to mention the same tolerances some where else also ....... what can be the reason behind this abberation .......
    Please help me .....
    Thanks
    Kaushik

    Kaushik,
    I dont think it is possibel to check all the persons who have changed. But if table logging is active in your system you could check the changes from transaction SCU3. In this transaction choose evaluate logs, choose Evaluate for tables, enter the table name AFPO. In output options choose Only actual changes and append table changes and Also evaluate check boxes. Enter the start and end date/ time. And then execute. You would get the user name, change date/ time, old and new values.
    If table logging is not active in your system, for future you may ask your ababp/basis team to activate it for the important tables you require and create a report query to find the changes made.
    Hope above is useful.
    Regards
    Ramanujan
    Message was edited by:
            Ramanujan Chitrakootam

  • ME54N Release strategy question over delivery tolerance limits

    I set up a release strategy base on the over delivery tolerance level. My problem is when a Purchase requisition is saved as rejected, and i click on the button cancel reject it deletes the last release strategy level because now it is looking at the actual total value disregarding the over delivery tolerance level.
    It works fine when the Purchase requisition is not rejected, and i can cancel or reject the purchase requisition without saving it and it does not delete the last line of the release strategy taking into account the over delivery tolerance level. I am using the user exit ZXM06U13.
    Can someone give me some insight into this ? Thanks.

    Hi Siva:
    You should request the development key for this structure under your SAP system, then you can add the extra fields in CEKKO.
    Good luck
    Z.T

  • Under and over delivery tolerance are not defaulted from Info record

    Under and over delivery tolerance are not defaulted from Info record. Does purchasing value key in material master has precedence over info record.
    What are the settings I have to check.
    Thnaks and regards,
    Suranjana

    No, Info records has precedence on PO than material master
    please check your info record and than verify the PO's plant and info record plant
    you might have more than one inforecord per plant for same vendor and material.
    so please check you have right value in right info record as per the PO vendor, mateiral and plant and Purchase org

  • Over delivery tolerance report

    Hi,
    I have given over delivery tolerance in PO for qty.
    So while making GRN,upto tolerance,the quantity will be accepted.
    Is there any report available to see the difference between the PO and GR done for PO's which has Tolerance limits?
    Regards

    hi,
    There is no seperate report for over and under del tolerance. you can create a quick qurey using SQVI and use PO table EKKO and EKPO to get ther report.
    Hope this helps
    Thanks,
    Suresh

  • STO under del.  and over delivery tolerance limit

    Hello friends
    Can anyone tell me the all settings for limiting STO for over delivery and under delivery. Its working fine for normal order (OR) and delivery but iam not able to apply on STO.
    Please help
    Regards
    Inder

    hi
    follow the menu path u can mention over and under delivery tolerance for STO
    IMG
    |
    |
    MATERIALS MANAGEMENT
    |
    |
    PURCHASING
    |
    |
    PURCHASE ORDER
    |
    |
    SET UP STOCK TRANSPORT ODER
    |
    |
    ASSIGN DOCUMENT TYPE,ONE STEP PROCEDURE, UNDER DELIVERY TOLERANCE
    REGARDS

  • Layout for packing list cannot be set for specific customers

    It is not possible to set an standard layout for the packing list for specific customers. So, if you have layouts in different languages, you have to check the standard layout every time before you print and to set the right one. In other documents it is possible to set an standard layout for specific customers/suppliers for example depending on the language.
    kind regards,
    Markus Niebergall

    Hi Engin,
    Have you followed the ios tutorial which sybase provides :
    http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01213.0200/doc/html/title.html
    if you get "login success" at console it seems everything fine there may be something missing.
    Regards
    Tahir

  • Under delivery and over delivery tolerances at prod order level

    Hi, Pls advise how to maintain the under delivery and over delivery tolearnce at production order level (other than maintaining material master)? is ther any setting at order type or order level? pls advise.

    Dear,
    Go to Co01or CO02 click on Good Receipt tab here you will get option to maintain the under delivery and over delivery tolerance at production order level. There is no other setting than this and material master.
    Regards,
    R.Brahmankar

Maybe you are looking for