Over delivery tolerance value while creating delivery document

Dear Gurus,
I need your help for the below scenario,
I have created a sales order for 25000 TO, Over delivery tolerance is 10 %.So logically speaking I can dispatch 27500 MT material.
I have created 3 deliveries as below,
1st delivery for 23500 TO
2nd delivery for 1480 TO
3rd delivery for 50 TO
That means if i see sales order at item level schedule line will show confirmed qty as 25000 TO,and delivered qty as 25030 TO.
Now I am trying to create one more delivery since over delivery tolerance is 10 % but system is not allowing me to create delivery and throwing an error saying
No delivery-relevant items in order 0025000281, order type ZEOR
If i check the long text it is as below,
No delivery-relevant items in order 0025000281, order type ZEOR
    Message no. VL455
Diagnosis
    The sales order you want to deliver, sales order 0025000281 with orde
    type ZEOR, either contains no delivery-relevant items or its
    delivery-relevant items have already been delivered.
Am i missing any IMG setting or this delivery tolerance value will be considered only for the last delivery,I mean once it exceeds 25000 TO system will not allow to create further deliveries even if it is not touched 27500 TO
Thanks in advance.
Regards,
Shrikant

Your system behaviour is correct and you can change this to warning message.  Go to zeroVLP, select your item category and maintain "A" for the field "Check overdelivery".  Presently, it should have been "B"
thanks
G. Lakshmipathi

Similar Messages

  • PS: WBS is not flowing for a Material, while creating delivery from Project

    Hi,
    While creating delivery from Project thro CNS0, WBS is not flowing for a Material in delivery, in turn WBS is not flowing in Billing document for same material, in turn not allowing to Post the Billing document to Accounting.
    Error while releasing Billing to the Accounting: Accounting Entry is not generated. Error Message:Assign Condition type
    YMRG in COPA.
    Pls let me know, what can be the reason ?
    Thanks.
    Amit.

    Hi Kuldeep,
    Check this note,
    Note 159387 - Message BP603: incorrect line item is displayed
    Its valid only till 4.6. Might give you some idea but.
    Regards,
    Gokul

  • Error while creating delivery for STPO

    Dear ALL,
    I am facing the following error while creating delivery based on the purchase order.
    """"Essential transfer parameters are missing in record""""
    Pls help me how can I proceed further.
    RGds
    Babu

    Hi
    What is the document type for the purchase order ? It seems that we may take wrong PO number in delivery creation

  • Error while creating delivery docuemnt

    Hello Friends,
    I have scenario of scrap sale, i have created metal sheets as a scrap material & created a sales order
    now while creating delivery with VL01N i am getting following error:
    Copying is not poss.because an entry is missing in Table TVCPL: ZOR ZLF &
    Copying is not poss.because an entry is missing in Table TVCPL: ZLF ZOR TAW
    Please guide me how can i proceed in this aspect.
    Thanking you in anticipation.
    Best Regards!
    Sadanand

    Dear Sadanand
    While creating your new order type in VOV8 itself (in your case ZOR copied fron OR) there will be a dialogue box from the system is this entry relevent for copy controls
    Have you given no there?
    Similarly While creating your new delivery type in OVLK  itself (in your case ZLF copied fron LF) there will be a dialogue box from the system is this entry relevent for copy controls
    It looks like you have said a no there
    Please delete your ZOR from VOV8 and log out of SAP and relog after 1 minute copy all relevent settings correctly
    While creating order type itself if you mention that this is relevent for copy controls  there is no need to go to VTLA at all automatic updation in VTLA will happen for your new order types
    This will help you
    Regards
    Raja

  • Budget error while creating delivery from sales order

    hi Gurus,
    System is throwing error PB603 "Item 004 WBS element ABC-XXX budget exceeded" while creating delivery from sales order.
    I am picking material from unrestricted plant stock (not in project stock).
    I am also confused as sales order has 3 line items & error shows Item 004 !

    Hi Kuldeep,
    Check this note,
    Note 159387 - Message BP603: incorrect line item is displayed
    Its valid only till 4.6. Might give you some idea but.
    Regards,
    Gokul

  • Shipping point error while creating delivery for subcontracting order

    Hi,
    I am trying to send Materials Provided to a Subcontractor via an SD Delivery using std SAP functionality using IDES preconfigured system.
    In transaction ME2O, while creating delivery, i am facing following error:
    Essential transfer parameters are missing in record:  000002
    The dignosis gives following details.
    Diagnosis
    Information necessary for this delivery is missing.
    Please help to sort out the problem.
    Regards
    SAmeer

    Hi Sameer
    please check OSS notes 102104 for detail help about this error.
    regards
    Srinivas

  • Update Termination Error while creating Delivery

    Hello Experts,
    I am trying to create delivery with reference to Standard Order when I click on SAVE I am getting message that delivery is being created. But when I am trying to open the same delivery in change mode I am getting Update termination Error saying delivery not created.
    So what I tried doing is while creating delivery I have given Picked quantity and done with PGI then i am able to save the Delivery successfully and table LIKP is also updated. But this is not always that I can do. In my production system, without doing PGI I should able to save Delivery.
    Please could anybody help me on this ..is there any SAP notes?
    PS: My system is upgraded from ECC 6.0  Ehp2 to ECC 6.0 Ehp7.
    Many Thanks in advance.
    Priyanka J.

    Hello Kiran, Hello Klaus,
    Below are the details;
    Function Module   
    RV_DELIVERIES_SAVE
    Status            
    Update was terminated
    Report            
    LV50UF0L
    Row               
    50
    Error details   Class:
    00    
    Number:
    671
    Internal session terminated with a runtime error POSTING_ILLEGAL_STATE
    MENT (see ST22)

  • Error while creating delivary document

    Hi
    i got error while creating delivary document
    "Delevivary documents could not be created"
    Thanks&regards
    kishore kumar

    Hi Kishore,
    Please check the sales order is this relevent for the delivery or not.
    Check the copy control settings between your sales document type and delivery document type in VTLA transaction.
    Check the incompletion log for the sales order.
    I hope it will help you,
    Regards,
    Murali.

  • How to avoid XVBPA line item values while creating sales order

    Hi Friends
    I am creating Sales order using function module IDOC_INPUT_ORDERS, for that I am passing partner details through segment E1EDKA1.If I pass the same partner details(Partner number, name1,name4,city,postel code) which is same like customer master,
    I can able to book the order and entries are coming only one time in VBPA table(Header Item level).But if I change any value for the particular partner in the Input(For example Name4, there is no value in customer master but I added through program).Now its creating an order but its showing the entered partner informations in header level.When I checked the same in line item level, its not picking the values from header, its picking the values from customer master for that particular partner.
    So this line item also coming in VBPA table, because its different from header data.
    Anyone guide me, how to avoid this problem while booking order through program.
    Thanks
    Gowrishankar

    I am updating Ship-To-Party value in segment E1EDKA1 and calling IDOC_INPUT_ORDERS function module to create the sales order.
    In this case for the particular partner there is no NAME4 value in KNA1, I am passing some value through this segment E1EDKA1.
    So its creating an order with this new addresses , so its generating new ADRNR in VBPA header level.Thats fine.But the same time
    its not copying the same value from header to line item.
    In Line item level again its picking the address details from KNA1 for the particular partner number.So its showing Blank value in NAME4 field of line items.Its creating and spllitting issue, while creating delivery.
    Thanks
    Gowrishankar

  • Create Excise invoice(J1IIN) document while creating billing document using bapi BAPI_BILLINGDOC_CREATEMULTIPLE

    Dear Experts,
    My scenario is:
    We have batch split scenario, where the parent line item of billing document has 0 quantity and its subsequent item (item with batch number) holds actual quantity data.
    When we create billing document using VF01 against delivery document, system creates billing document along with excise invoice document (J1IIN Document). And in excise document contain same number of line items that of billing document. Please see the below attachment: 
    Biiling document screen shot:
    While creating billing document, the J1IIN Document created automatically. Below is the screen-shot for the same.
    Now the issue is:
    When we create billing document using BAPI: BAPI_BILLINGDOC_CREATEMULTIPLE system creating only billing document and not creating excise invoice document.
    When we create excise document manually using J1IIN the zero quantity line items are excluded in excise invoice document.
    Please see the below screen-shot for the same; The z quantity line items are missing.
    We want excise document to be created while creating billing document using BAPI BAPI_BILLINGDOC_CREATEMULTIPLE. Or is there any other BAPI for the same purpose.
    Customization is also maintained for creating excise invoice document automatically.
    Regards,
    Rajesh Sadula.

    HI
      Pricing will be carried basing on the pricing
    procedure.
    Case1: Prices will be carried out automatically if
    necessary condition records are maintained for the
    condition type.
      For this you can go to Sales Order-> Item Conditions
    In the screen you can click on command button Analysis,
    which gives you the list of condition types associated
    to the pricing procedure. By clicking on the condition
    type you can know the action that has taken place.
    Case2: Manually forcing prices for Items.
      To do this, you have to populate ORDER_CONDITIONS_IN &
    ORDER_CONDITIONS_INX. Also note to identify the item
    numbers, you manually pass the item number for each item
    in the sales order, use the same item number for
    populating conditions.
      Parameters required:
    ORDER_CONDITIONS_IN:
      ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
    ORDER_CONDITIONS_INX:
      ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
       Hope the above info helps you. Do revert back if you
    need more info.
    Kind Regards
    Eswar

  • Heap space error while creating XML document from Resultset

    I am getting Heap space error while creating XML document from Resultset.
    It was working fine from small result set object but when the size of resultset was more than 25,000, heap space error
    I am already using -Xms32m -Xmx1024m
    Is there a way to directly write to xml file from resultset instead of creating the whole document first and then writing it to file? Code examples please?
    here is my code:
    stmt = conn.prepareStatement(sql);
    result = stmt.executeQuery();
    result.setFetchSize(999);
    Document doc = JDBCUtil.toDocument(result, Application.BANK_ID, interfaceType, Application.VERSION);
    JDBCUtil.write(doc, fileName);
    public static Document toDocument(ResultSet rs, String bankId, String interfaceFileType, String version)
        throws ParserConfigurationException, SQLException {
            DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
            DocumentBuilder builder = factory.newDocumentBuilder();
            Document doc = builder.newDocument();
            Element results = doc.createElement("sims");
            results.setAttribute("bank", bankId);
            results.setAttribute("record_type", "HEADER");
            results.setAttribute("file_type", interfaceFileType);
            results.setAttribute("version", version);
            doc.appendChild(results);
            ResultSetMetaData rsmd = rs.getMetaData();
            int colCount = rsmd.getColumnCount();
            String columnName="";
            Object value;
            while (rs.next()) {
                Element row = doc.createElement("rec");
                results.appendChild(row);
                for (int i = 1; i <= colCount; i++) {
                    columnName = rsmd.getColumnLabel(i);
                    value = rs.getObject(i);
                    Element node = doc.createElement(columnName);
                    if(value != null)
                        node.appendChild(doc.createTextNode(value.toString()));
                    else
                        node.appendChild(doc.createTextNode(""));
                    row.appendChild(node);
            return doc;
    public static void write(Document document, String filename) {
            //long start = System.currentTimeMillis();
            // lets write to a file
            OutputFormat format = new OutputFormat(document); // Serialize DOM
            format.setIndent(2);
            format.setLineSeparator(System.getProperty("line.separator"));
            format.setLineWidth(80);
            try {
                FileWriter writer = new FileWriter(filename);
                BufferedWriter buf = new BufferedWriter(writer);
                XMLSerializer FileSerial = new XMLSerializer(writer, format);
                FileSerial.asDOMSerializer(); // As a DOM Serializer
                FileSerial.serialize(document);
                writer.close();
            } catch (IOException ioe) {
                ioe.printStackTrace();
            //long end = System.currentTimeMillis();
            //System.err.println("W3C File write time :" + (end - start) + "  " + filename);
        }

    you can increase your heap size..... try setting this as your environment variable.....
    variable: JAVA_OPTS
    value: -Xms512m -Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m

  • Delivery tolerance (based on the delivery date)

    Dear All
    How to maintain delivery tolerance (based on the delivery date) in Purchasing Order
    Would you help me, please
    thanks
    imron

    YOu can try with
    u2022     ST: Date variance (value x days)
    The system calculates for each item the product of amount * (scheduled delivery date - date invoice entered) and compares this product with the absolute upper limit defined. This allows relatively high schedule variances for invoice items for small amounts, but only small schedule variances for invoice items for large amounts.
    IN transaction code OMR6 for a company code.
    IN SPRO - Materials Management -- LIV -- Incoming  Invoice -- Invoice Block.

  • Message as Deliveries not assigned while creating shipment document

    Dear Friends,
    I have created delivery document with TC VL01n.Document is saved but PGI has not done.
    Now I am creating shipment document with TC VT01n.I have selected delivery document from the drop down list.After entering Delivery document no I get a message saying total of deliveries not assigned.
    What could be the reason ? and how to correct it?
    Thanks in advance.
    Regards,
    Shrikant

    Hi Srikanth,
    There are certain settings for shipment to get carried on like transportation should be relevant for Route, Delivery Types & Delivery item Categories.... Kindly check whether all of these are relevant for Transporation and then carry out picking for your particular delivery and then try creating shipment document....
    Regards
    Harsh

  • Error while creating billing documents

    Hi,
      While creating billing documents I am getting error message as 
    Maintain customizing for excise and series group determination
    Message no. 8I619
    I have check the setting for CIN it is OK excise and series group are maintain properly so what can be the proble,
    regards,
    zafar

    Hi,
    Check once again customizing
    Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    - Define excise series groups based on type of outgoing document
    - Assign series group to excise registration ID
    - If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    - If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
    - No account postings for CENVAT in sales cycle
    - No utilization Flag
    If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
    If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
    Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Thanks
    Chidambaram

  • Changing billing document date while creating billing document from vf01

    Hi gurus,
    I have requirement to change billing doc date while creating billing document from VF01.
    here I have to consider goods issue date eq billing date.
    caluculating billing date = Goods Issue + Goods in Transit duration time.
    I have done everu thing but I cant update the caluculated date, iam using the following enhancement
    Enhancement:SDVFX001
    Function Module:EXIT_SAPLV60B_001
    Include:ZXVVFU01 which are part vf01.
    here iam sending the calculated date to VBRK-FKDAT
    move cal_date to vbrk-fkdat.
    need help how to update the calculated date to VBRK-fkdat i.e billing document date
    Regards
    Bhaskar

    Hi
    No! That exit is not good for your issue
    U can use the user-exit USEREXIT_NUMBER_RANGE_INV_DATE  defined in RV60AFZC
    Max

Maybe you are looking for