Over-ride concurrent prog noprint option with printer used in CheckPrinting

I would need to give a little bit of back ground on the Check printing process that we follow to explain my issue.
Check printing is done by 2 departments - AP and Treasury. AP selects invoices and runs the payments process while Treasury prints the check and confirms the payment.
Now the issue is when AP submits the payment process, the 'Format Payment Instructions' request gets submitted. Now the users in our AP department have their printer profile set to a default printer and copies set to 1. So for every concurrent request that they submit, the output is printed to this default printer. This has been working fine so far and also works for other requests submitted by the PPR. But the 'Format Payment Instructions' request has the check file in the output which gets printed in the printer from their profile option.
If the printer option is unchecked or default printer is set to noprint in the concurrent program definition of 'Format Payment Instructions' program, the check does not print at all. Even when the treasury submits the check for printing by selecting the printer. It does not work.
Is there anyway we could get the printing of checks by Treasury over ride the concurrent program definition or supress printing of checks by the 'Format Payment Instructions' program while being submitted by AP responsibility.
Any ideas/help on this would be great as we are going live with the upgrade now and would really need to address this issue.
Thanks!
Ramya

Hi TJ,
you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
But, based on that data, I do not know which ones ;-(
There are dynpro tables like dynpload or d3456t or so not proper ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Similar Messages

Re: experiences with printing using Word/DDE sought

DDE is not that reliable. Try using OLE. We are using OLE to talk to
Lotus Word and its working out OK.
ka
john.jamison @ Sagesoln.com ("John L. Jamison")
10/07/96 10:53 AM
To: forte-users @ Sagesoln.com @ Internet
cc: (bcc: Kamran Amin/NAC)
Subject: experiences with printing using Word/DDE sought
Hi Forte Users,
We are trying to merge and print forms using FORTE-DDE- Ms Word connectivity
and would like to know if any of you have had any experience in doing this. We
will be printing both from the client as well as from a batch operation.
What we essentially want to be doing is to be able to return a status from
Word to FORTE if any operation failed within MS Word, such as printer not
online, paper jam or out-of-paper, etc. Any other experiences or
problem/pitfalls would be appreciated as well.
Thanks for the Help,
Bala Cuddalore,
Sage Solutions
[email protected]
John Jamison
Sage Solutions, Inc.
353 Sacramento Street, Suite 1360
San Francisco, CA 94111
415 392 7243 x 508
[email protected]
Fax Cover Page:

The CP1525 does allow you to print envelopes.There are two trays that can be used. I will describe only using the lower tray. Normally this tray is used for standard paper. To use it for letter envelopes, you need to pull out the tray and then make some changes. Take out all of the paper. There are blue-colored paper supporters. Two are used for the width of regular papers. Slide it toward the center so that it will handle the envelope with the top toward the left side. Put the envelope in with the printable side up and the top towards the left side. Slide the blue paper holders so they touch the top and bottom. Then push the envelope all the way toward the back and then move the single blue paper holder at the front so that it is against the envelope. You are ready to print as far as the printer.
I have to select properties for the printer. I indicate that I am printing an envelope. I also had to indicate landscape. I also had to move the print areas to fit where I want them to be. Then I added my address and the address to where they are going. I am not sure that I got everything but this should work well.
I did not do this, but you can use both trays with one that holds a number of pages and the other for a number of envelopes.

How to get rid of ads that interfere with my use of a website

Whenever I go to Youtube and eBay, there are ads on both sides of the screen that interfere with my use of the websites. They hover over the play buttons and pictures. I thought these were part of the websites until someone told me that it doesn't happen on their computer and that it might be adware. This only happens on Youtube and eBay and they are physically part of the webpage, not a popup. How can I get rid of these? Running Snow Leopard and I use Firefox as my browser.

Here, to show you what I'm talking about. The ads on the sides don't actually show up until a few seconds after the page has loaded and it seems that they constantly refresh. On Facebook it does this too, but the ads don't actually interfere with my use of the site. However, it will redirect me to another site when I'm Facebook.

Checking against Select-Options with "CP" using "IF value IN select_option"

Dear experts,
first of all: I'm sorry, if this question already should have been asked and answered!
I tried quite a lot of search terms but didn't find anything helpful.
We are using a statement like "IF value IN select_option" to perform comparisons after the Select-Options have been used in a SELECT statement. This logical expression fails (compared to the results of the DB-SELECT) whenever a select-option line contains the option CP (Contains Pattern). To be more specific: The case sensitivity of the LOW value doesn't seem to play a role any more. A variable with the value 'ABCD' would be positively checked against a select-option with OPTION 'CP' and LOW 'abc*', whereas this value wouldn't have been selected if the select-option had been used in a DB-SELECT.
Does anybody know a workaround?
Thanks in advance
Andreas

Dear Keshav,
it's an own field in an own table, defined as CHAR of length 140 (lowercase allowed), reflecting to a line of remittance info of an account statement. A regular Select-Option for this field is provided in a report which works perfectly fine regarding the case sensitivity. For reasons I don't want to point out in detail we need to check a value in this field against the select-option without selecting it from the db again.
Let's assume that a field remittance_info contains the value 'ABCD'.
A line of the select-option table looks like this:
select_option_table-SIGN = 'I'
select_option_table-OPTION = 'CP'
select_option_table-LOW = 'abc*'.
Then an ABAP statement such as
IF remittance_info IN select_option_table.
* would be true !!!
ENDIF.
but wouldn't deliver a result in a SELECT such as
SELECT * FROM my_table INTO TABLE my_internal_table WHERE remittance_info IN select_option_table.
because of the differences in lower/upper case.
regards
Andreas

I am having issues with printing using Adobe Reader

I am currently using adobe reader and have not been able to print with my HP DeskJet 3050, I have both reinstalled my drivers and Reader, yet they both will not work. Every time I click print it brings up the printing options screen, from there I have tried the following: I have tried printing the document as an image, changing the language to see if the printer itself could not handle the printing language and I have also tried to save the document as a preprint and printing it from there yet it is still not working. Here are all of the notes from Reader showing the build and features:
System Parameters:
Account Detail:
   User Rights: Admin
   User Account Control: Default
   Process Integrity: Undefined
   Profile Type: None
Acrobat Detail:
   Sandboxing: On
   Captive Reader: No
   Multi-Reader on Desktop Support: Off
Available Physical Memory: 1808376 KB
Available Virtual Memory: 3937960 KB
BIOS Version: ACRSYS - 6040000
Default Browser: C:\Program Files (x86)\Internet Explorer\iexplore.exe
    Version: 9.00.8112.16421 (WIN7_IE9_RTM.110308-0330)
    Creation Date: 2013/02/13
    Creation Time: 10:31:26 PM
Default Mail:
Display Detail:
   Screen Width: 1366
   Screen Height: 768
   Number of Monitors: 1
   Number of Mouse Buttons: 5
   Has Mouse Wheel: Yes
   Has Pen Windows: No
   Double Byte Character Set: No
   Has Input Method Editor: Yes
   Inside Screen Reader: No
Graphics Card:
    Version: 0.0.0.0
    Check: Not Supported
Installed Acrobat:
Installed Acrobat: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
    Version: 11.0.02.0
    Creation Date: 2013/02/15
    Creation Time: 5:04:53 PM
Locale: English (United States)
Monitor:
    Name: ATI Mobility Radeon HD 4200 Series
    Resolution: 1366 x 768 x 60
    Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows Vista
OS Version: 6.1.7601 Service Pack 1
Page File Space: 4194303 KB
Processor: AMD64 Family 16 Model 6 Stepping 2 AuthenticAMD ~1995 Mhz
Session Detail:
   Boot Type: Normal
   Is Shutting Down: No
   Network: Available
   Inside Citrix: No
   Inside VMWare: No
   Remote Session: No
   Remote Control: No
System Name: USER-PC
Temporary Directory: C:\Users\User\AppData\Local\Temp\acrord32_sbx\
Time Zone: Eastern Standard Time
Total Physical Memory: 2881904 KB
Total Virtual Memory: 4194176 KB
User Name: User
Windows Detail:
   Tablet PC: No
   Starter Edition: No
   Media Center Edition: Yes
   Slow Machine: No
Windows Directory: C:\Windows
Installed plug-ins:
C:\Program Files (x86)\Adobe\Reader 11.0\Reader\plug_ins\Accessibility.api
    Version: 11.0.01.36
    Creation Date: 2012/12/18
    Creation Time: 2:08:34 PM
C:\Program Files (x86)\Adobe\Reader 11.0\Reader\plug_ins\AcroForm.api
    Version: 11.0.02.0
    Creation Date: 2013/02/15
    Creation Time: 5:04:56 PM
C:\Program Files (x86)\Adobe\Reader 11.0\Reader\plug_ins\Annots.api
    Version: 11.0.01.36
    Creation Date: 2012/12/18
    Creation Time: 2:08:30 PM
C:\Program Files (x86)\Adobe\Reader 11.0\Reader\plug_ins\DigSig.api
    Version: 11.0.01.36
    Creation Date: 2012/12/18
    Creation Time: 2:08:32 PM
C:\Program Files (x86)\Adobe\Reader 11.0\Reader\plug_ins\EScript.api
    Version: 11.0.01.36
    Creation Date: 2012/12/18
    Creation Time: 2:08:30 PM
C:\Program Files (x86)\Adobe\Reader 11.0\Reader\plug_ins\IA32.api
    Version: 11.0.01.36
    Creation Date: 2012/12/18
    Creation Time: 2:08:32 PM
C:\Program Files (x86)\Adobe\Reader 11.0\Reader\plug_ins\PPKLite.api
    Version: 11.0.01.36
    Creation Date: 2012/12/18
    Creation Time: 2:08:34 PM
C:\Program Files (x86)\Adobe\Reader 11.0\Reader\plug_ins\Updater.api
    Version: 11.0.01.36
    Creation Date: 2012/12/18
    Creation Time: 2:08:34 PM
C:\Program Files (x86)\Adobe\Reader 11.0\Reader\plug_ins\weblink.api
    Version: 11.0.01.36
    Creation Date: 2012/12/18
    Creation Time: 2:08:30 PM

Adobe will not send data to que up with the printer, when checking the print que, even if I set the printer to offline it will not que up.

PB with print using Adobe PDF printer

I'm using LR2.6 on Windows 7 / 64 bits with adobe acrobat pro 9.3.1.
When I try to print an image from lightroom printing module using the Adobe PDF printer, the file I obtain has no picture but a gray rectangle with an error message in red : Error - A2code.
Does anyone know what is the problem?
Thank you.
Eric

OK, a discussion on that problem has already been launched! Going to had a post to it!

Issues With Printer Using drv:///sample.drv/generic.ppd from Command Line

Hi All,
I was using generic postscript driver earlier with Mountain Lion. I Created a print queue using "lpadmin -p MYPrintQueue -m drv:///sample.drv/generic.ppd -v socket://<IP>:9100 -E"
This created a print queue with Generic Postscript Driver.
Now when i am trying same command with Mavericks, It's Creating a Local Raw Printer. Can anyone tell me where i am going wrong.
I need command line resolution only.
I know i can create print queue from cups web interface. There its working fine.
But i need to use command line only.
Thanks.

Hi,
Would you please try following commands?
Please don't add quotes on the inf file path: change the driver folder name NC Print Drivers as NCPrintDrivers.
rundll32 printui.dll PrintUIEntry /if /f C:\Temp\NCPrintDrivers\dellopd_A06\dellopd.inf /r "192.168.10.157"
Make sure to run the command as admin.
Let me know if it can work fine.
Kate Li
TechNet Community Support

"Clear Recents" screen only option with phone use since 4.1 upgrade.

Since I upgraded to 4.1 my phone is stuck on the screen one would see if you decide to clear recent calls. I noticed this when I got a call yesterday and after the call ended that screen appeared. I tried hitting the Cancel and nothing happened. Not wanting to erase recent calls I elected not to hit the Clear All Recents button so I just hit the home button. Problem is that I can't access my phone to make a call. When I hit the phone button all I get is the Clear Recents screen. I can still get incoming calls.
I did I reset on the phone yesterday and that seemed to work until today when I noticed it acting up again. I've reset again and will wait to see if it persists.

Do a "Hard Reset" to clear problem: Press power and home buttons simultaneously until apple logo comes on. wait. It will make a ping sound and go to black, or it may go to the opening screen. Start phone.
It is suggested that once a week you should turn the phone power off to refresh.

Tilting screen gives better colour matching with print why did I need spyder pro?

OK, that was not a serious comment but there is truth here, and it should not be?
Equipment:
Imac 10.4.11
Photoshop CS3
Canon printer
monitor callibrated with Spyder 3 Pro
Colour management policy accurate in theory,
Working space same as camera space same as embedded profiles from Raw.Adobe RGB1998,
working in 16 bit, minor adjustments in raw, and CS3.
paper used - Photo Paper Plus Glossy (PP101)
Printer profile set to SP2 (same as semi gloss unfortunatley)
Detailed setting used in apple print dialogue to highest which is 2 unfortunately, not 1.
Screen is set to Soft proof before print for above paper.
PROBLEM:
1. Blues and Greens always less saturated than screen
2. Prints generally slightly darker, This is problem with grays and shadows being darker than screen.
3. Oranges less saturated
4. Colours often, in general, are bland and lack the impact that I see even in the soft proof.
QUESTION:
What could be going wrong? I have used the channel mixer to compensate for colours, but this I was doing before i bought the spyder3 Pro. I should not have to do this. Does the printer convert on the fly a 16 bit data image to 8 bit, because I never convert before sending to the printer? In windows my printer shows the option to print using Adobe RGB 1998. But in my Mac I do not see this option, could it be that the printer is using s'RGB regardless of what CS3 sends to it?
I have been struggling with these issues for a few weeks now and can find no solution. EXCEPT, that when i tilt my LCD monitor upwards I get better colour accuracy, the darker parts of images are more in line with the photo. YET, i have profiled the monitor at least 15 times over the past 2 weeks.
I am Lost. Can anywhere help please?
thankyou, Chris.

Chris wrote:
>But as with marketing campaigns and advertising policies, maybe it is time for the "Teachers and lecturers" in this industry to make this point more clearly.
Yes, they certainly should emphasize how quality and the means to achieve it are also tied to better equipment. It's also necessary that the users become more competent, of course, but the quality of the materials and equipment is just as crucial in order to achieve quality results.
>It is only something that I am beginning to realise. for me a monitor was a monitor. The way that colour management hardware manufacturers talk is therefore un-balanced.
They do their bit, which also includes the necessary evils of hype and marketing. It's *our* job not to fall for the inflated claims and the manufactured enthusiasm -- to ask around, read the reviews and understand how to interpret the specs. NEVER buy ANYTHING just based on the say-so of the manufacturer!
>The way that Pantone and makers of colour cards rant on about colour is also un-balanced. What they should be adding is ....with a proper monitor designed for photos these products will work??
The matching of spot colors on a monitor display is a tricky business in itself. Of the 1100 or so colors in the Pantone Coated palette, about 140 are more than 3 DeltaE 2000 outside of the gamut of sRGB (using Relative Colorimetric) and about 185 are more than 2 DeltaE 2000 off. The peak color difference is at 13 DeltaE.
But many of the monitors out there don't even cover sRGB, which is a relatively small color space. My Apple Studio Display has a gamut 15% *smaller* than sRGB, for example: more than 200 of the Pantone coated colors are 3 DeltaE 2000 or more outside its gamut (with a peak at 11.4 DeltaE), and 265 are off by 2 DeltaE or more.
On the other hand, the newer higher-end displays from Eizo and NEC-Mitsubishi (and others too from Samsung and HP) cover gamuts that are far wider, enough to cover AdobeRGB or larger.
Only 35 Pantone coated colors are outside AdobeRGB by 3 DeltaE 2000 or more, and 65 by 2 DeltaE 2000 or more (the highest color difference is a much more moderate 6.2 DeltaE).
Not perfect, but a much better situation -- all due to using a better monitor (which, yes, is also more expensive).

How can I print using only black with the Lexmark Z810?

Mac OS X 10.6.8
Print Using 810 Series driver
Printer Driver Version: 10.6.4
I want to print using only the black cartridge. I'm out of color ink. However, I see no option to print using black only. Consequently, when I print a document, only the parts of it that are black with show up on the paper. Anything that has another color will not appear on the page. Is there a solution to this problem?

Print Options can be hard to find and sometimes seem to change locations depending on OSX version or printer model. Here is where it is on the print dialog on my mini with HP printer.

Can anyone help with printer options on iPad mini, can I change layout paper size?

I am trying to change the printer options on my iPad mini so that I can print on legal size paper, I also would like to change to portrait layout. Is this an option when printing from an iPad Mini?

Chad-
I think the same problem exists with all the iOS devices. I suggest you look for a free App from the manufacturer of your printer. It will have limitations, but may include the ability to change paper size and image size and orientation.
There are other printing Apps such as Print n Share that can do that, but they are not free.
The problem you may face, is that such printing Apps can only be accessed from within other Apps that have the "Open In" option. If you can use their built-in programs, they may meet your needs.
Fred

I need to able to print a pdf that is locked. It has fields to fill in but then to save a copy I need to "print" to PDF not save as a pdf because that is not an option with the document. Is there a way to do this?

The PDF has fields to fill in but then to save a copy I need to "print" to PDF not save as a pdf because that is not an option with the document. Is there a way to do this? HELP!

Sorry I thought was just a one off, it would be no use for large volumes.
Do you not have this avaiable in the print menu in Preview with these documents?
I have also found a link on the Adobe web site that discusses that this facilty is enabled by the creater of the PDF.
http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd61510979419 5ff-7e0d.w.html
If you do a web search there are various claims on how to save a protected PDF, I have'nt a way to test the proceedures. I would want a copy of any forms that I sent off, not sure why they protect them in this way, there must be a reason.

Pages are not printing out correctly. I have tried to fix in the options, with no luck. It prints out with spaces in between the letters.

When I go to print any page from an email, webpage, pdf file..the pages print out very wide fonts to the point where it is unreadable. I have tried to fix in the options with no luck. I can provide you with visuals if you need me to.

Thanks very much! It works! The print / review print - print works like it is supposed to. The print is corrected and works great. Thanks again.

Can't over ride "Secure connection failed", no over ride option shows.

Secure Connection Failed
I have connected to this page many times before.
Emptied cache and cookies last night. Now FF won't allow
site. There is no "Allow" option showing on warning screen.
How can I over ride/ allow?
An error occurred during a connection to ohiomeansjobs.com.
The OCSP server has no status for the certificate.
(Error code: sec_error_ocsp_unknown_cert)

My friend has found a workaround:
[7/24/14, 10:08:46 AM] Andy Nowakowski: go to 'about:config' in a new tab
[7/24/14, 10:09:13 AM] Andy Nowakowski: toggle security.use_mozillapkix_verification
[7/24/14, 10:09:23 AM] Andy Nowakowski: and it will return to previous behavior
found on the bugzilla :)
''(fixed pref name - c)''

How can I use pdf pack to convert cubase documents (music scores) into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?

How can I use pdf pack to convert cubase documents (music scores) into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?

Hi mariab,
What format are those music scores (I'm not familiar with cubase documents). But, it may be that Adobe PDF Pack doesn't support that format. In that case, Acrobat is the way to go. You can then print your files to PDF as you'd like. You're welcome to try Acrobat for free for 30 days to see whether it's going to work for you. If you decide it is, and you'd like to use it going forward, you could convert your PDF Pack subscription into an Acrobat subscription.
Best,
Sara

Over-ride concurrent prog noprint option with printer used in CheckPrinting

Similar Messages

Maybe you are looking for