Over-under mode

Dear all,
I am writing a 3D program, the output from the video card separate the 3D image evenly into two half with a blank row when I choose to use over-under mode. However, it cause a problem. I contacted the company which make the 3D graphic display, they said it supposed to leave a blank row in between the top and bottom half of the image. My question is how can I do that setting? The explaination from the company is below
Thanks
Marco
"""An over-and-under stereoscopic image pair is created by first determining the number of visible pixel rows on the display screen. As an example 1024 row by 1280 pixels per row display mode with a refresh rate of 60 Hz..
Subtract roughly 10% of the active rows from the total visible rows. The left and right eye image will each consist of the full horizontal width of the screen and half of the remaining pixel rows.
This diagram of an unmodified display screen shows how the visible rows of pixels are utilized for the left and right eye images of an over-and-under stereoscopic image.
active rows (n):     1024
10% of active rows (0.1n):     - 102
total active rows available for images (0.9n):     922
active rows for left eye image (0.9n/2):     461
active rows for left eye image (0.9n/2):     461"""

Don't know if it's possible, but UI customization in Lr is very limited. When such questions come up, the stock answer is "look, it's the way it is for a reason..."
It could well be that if I had the option to move everything around to my heart's content, I'd eventually end up with the present layout because it's, well, the most efficient. But we'll never know, will we...
Backslash toggles before and after, if that's any help.

Similar Messages

  • Reporting Direct Production Cost Center Over/Under Absorption

    Hi,
    I am trying to find a way to report Manufacturing Cost Center Over/Under Absorption in a similar way COGS are reported in CO-PA. I mean - I would like to breakdown Direct Manufacturing Cost Center Over/Under Absorption into cost elements (just like COGS are broken down in COPA when invoice is posted).
    I wonder if this is possible in SAP without Material Ledger implemented. If yes - can it be achieved by using a standard functionality or does it require an additional development?
    Thank you,
    K

    Thanky you for your reply Ranjan,
    My intention was to show Cost center over/underabsorption broken down by cost componets (activity Labour, Machine, Overhead). Currently it is shown as a balance on cost center. I would like to be able to recognize which part of Direct manufacturing CC balance refers to Labour, which to Machine and which to Overhead. Is it possible to achieve in sandard report or additional settings/development is required.
    Regards,
    Karol

  • Over Under Payment

    Hello
    I am developing an Add-On which i use to send payments to an invoice, i would like to use the functionality of over under payment from SAP Business One.
    When i pay to an invoice more than it should be (over payment), it works fine. But when we try to do it under, it doesnt work, it leaves the invoice open.
    Which object should i use, the invoices.Summaplied??
    Thanks
    Jacobo

    Yeah,
    For understanding that try tthe following...
    1. Post a normal complete payment aganist an invoice.. then check the entries in the corresponding tables ( ORCT and child table)
    2. Now post an underpaid invoice and check the tables and see the differenct the remainig amt will be posted to another acc or something... if u can get that field then u can do the same in SDK also..
    I'm busy with other things or i would have did the above and tell u the filed.. just try the above...
    But my guess is it could be *UnderOverpaymentdifference Property * check for the data of this field in both the situations.
    Hope it helps,
    Vasu Natari.

  • Over/Under Payment Question

    For a customer I want to be able to handle over/under payments different depending on whether there is a small or large over or under payment. If there is a small difference, I want the difference to go to a seperate G/L account. If there is a large difference, I would like to have the difference posted as a residual. I have a EDI process that is filtering this data in and will always use a reason code with it. I have attached this reason code to a G/L account.
    What I have experienced is that I through the process I can get the difference to post to the seperate G/L account - but it is posted there whether it is a small or large difference. I have tried to change tolerance amounts for both the company code group and the user group, but this does not seem to make a difference.
    Is there a way anybody knows that I could have some sort of tolerance or restriction on the G/L account so only small amounts would be placed into the account and larger amounts would have a residual created?

    So how would I get the small differences to automatically clear to a seperate G/L account?
    I still need the functionallity of automatically posting the small differences to the G/L account, but posting the larger differences to a residual.

  • Pulling Over/Under delivery Tolerances from Customer Master into CMIR

    Is it possible to pull the over/under delivery tolerance values from the customer master info the CMIR?  I don't understand why the delivery priority flows from the cusotmer master to the CMIR but the Over/Under Tolerances do not.  I've looked at SAPMV10A ... it looks like I might be able to use an enhancement spot to add the necessary logic but I've not used this type of user exit and I'm not sure if there is a better solution (like some configuration that I'm missing ???)  Any advice would be appreciated.  Thanks!

    Hi Mallisa,
    I tried creating a CMIR record and both Delivery Priority and Over/Under Delivery tolerance were copied in CMIR record from Customer Master.
    BR,
    Anshul Chohan

  • What is Over Under Absorption means?

    Hi guyz,
    When I'm running Cost Center Actual/Plan/Variance Reporting, there is a field that is called Over/Under Absorption.
    What does it mean by Over/Under Absorption?
    Thanks guyz

    Hi Meila,
    It can be a surplus or deficit in actual costs compared to planned costs on the receiver side, but does not have to be.
    Imagine your  sending cost center is a grinding mill in a cement plant. It is planned to produce 100.000 t cement in the month, for what the mill would run 1000 h. The rate is 100u20AC /h. Therfore the planned absorption would be 100.000u20AC. In the end of the month it turns out that actually the Mill ran 1200 h and 120.000 t Cement were produced. Each of the daily cement production orders would show no unplanned costs, but the mill cost center would have an overabsorption of 20.000u20AC.
    best regards,   Udo

  • I am trying to make a fraction in a form field and I would like it to have an over/under appearance. Is this possible?

    I am trying to make a fraction in a form field and I would like it to have an over/under appearance. Is this possible?

    What system and iPhoto version are you running?  What theme are you using.
    All of my calendars do have the month starting on Sunday,  Don't know of any way to change it.  Where are you located?
    How do you have your Calendar application's preferences set to, Sunday or Monday start of week? 

  • Excel like Over/Under formula

    HI, does anyone know how to make a over/under formula. I am making a home budget and when I was using Excel I had a Budgeted column, and a Actual column,then it had a column that would show me if i was at budget, over budget, or under budget and give the amount of the difference. Is that possible with numbers? I'm new to numbers and I never really used excel just the template that came with it.

    I use Excel but I'm not sure what you are asking since I've never done exactly what you describe, apparently.
    You seem to want it to include text in the cell. But do you really need that? I mean, if the deviation column is a negative number or positive number, wouldn't that be sufficient to tell you if you are over or under? Do you need to have it specifically include "over", etc?
    I don't actually have Numbers so I can't tell you if what you want is possible or if there is a workaround to get the text you want.

  • "line over/under text" from old Quark doc - how to get rid of them?

    "line over/under text" from old Quark doc - how to get rid of them?
    Can´t seem to finde this and deadline is coming for this project..
    Thanks!
    G.

    I actually found it by myself. But thanks for your response. Not having used my danish version of Quark for 5 years makes finding options i dont usually use in indesign kind of hard. I won´t ever miss danish quark.

  • Problems with over/under absorption on production cost centers - GBB AUI

    Hi,
    I have a problem with over/under absorption on production cost centers after month end closing.
    We are using material ledger CKMLCP and actual activity rates from direct cost centers are settled directly to products using GBB AUI account determination.
    Unfortunately from time to time there appears a significant balance on production cost centers after running CKMLCP. What might be the reason? I have analysed line items on cost centers but cannot find any answers.
    We are using assignment of cost elements to particular activity types (function splitting), and I have checked that all cost elements are assigned to proper activity types.
    Best regards,
    Karol

    Hi,
    DP90 is used for Resource related billing, is broad term basically when you performing service that time you have to raise billing on the basis of resources which you had spend for perticular service
    DP90 is run on the basis of DYNAMIC ITEM PROCESSOR,
    http://help.sap.com/saphelp_di471/helpdata/en/59/54fc37004d0a1ee10000009b38f8cf/frameset.htm
    I will tell you one process from the prspective of CS module
    Create notification >> Create service order >> Confirm service order >> Resource releted billing (genrates sales document) >> Invoice to customer with refrance to sales document.
    Now here DP90 is used to determine material,IN SALES DOCUMENT because CS module don't have billing feature as like SD Billing.
    In CS module activities/Operation,but in SD module we speciefy material codes
    So DIP determines XYZ activity/operation is ABC material in SD
    kapil

  • Over/Under Payment from Customer - Reason Code

    We are trying to perform an incoming under payment from a Customer. We do not want to do a partial / residual payment. We would to like to send the difference amount to a particular GL account XXXXXX (bad debt). There might be situations where the difference amount is charged off to another GL account YYYYYY. Can we handle these situations using reason codes?
    I tried to configure a couple reason codes to handle this, but couldn't make it work.
    Could you please explain in detail how can we make the over/payments to be charged to different accounts.
    Any help would be greatly appreciated.
    Thanks,
    Venkat

    Hi,
    You define Reason Codes in Customizing. Use the menu path in IMG :
    Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Incoming Payments -> Incoming Payments Global Settings -> Overpayment/Underpayment -> Define Reason Codes
    In the reason codes definition, tick the check box with Heading 'C' immediately after the Correspondence Type.
    Then maintain the settings Define Accounts for Payment Differences. In this setting, you can have different accounts depending on the reason code. Click on Rules and tick the check box against Reason Code. Click on Accounts and maintain the correct accounts against the reason code.
    Once you have maintained the above settings, you can post the difference directly to a GL Account using Reason Code. For this, when you enter incoming payment using T-code F-28, in the open item screen, click on the Residual payment tab and enter the residual Amount. Just next to residual tab is the field to enter the reson code. Enter the appropriate Reason code and your posting will be done to a GL Account.
    Hope this helps
    Regards
    Mahendra
    Assign points if useful

  • Over / Under payment not working

    My over and under payment setup stopped working after I installed p42...I then upgraded to p47 and it still is not working, has anyone else experienced this problem?
    I have all my set ups done, GL's, doc settings etc....it just will not post my difference and reconcile the document. HELP any ideas
    Joanne

    I have found the issue, please disregard
    Jo

  • How to default Over&under delivery tolerances into Replishement delivery ??

    Hi
    How to default the Over delivery and under delivery tolerances in to the replishement delivery created against the STO which has those tolerance values ??
    And i should be able to do Goods receipt(GR) with over delivery quantity within the limits against the replishement delivery(I do not want to do GR against STO)
    Thanks
    Maruthi Ram

    Hi Jurgen,
    Thanks for the link you provided.
    But can't we control the overdelivery tolerance just like the under delivery for a specific combination of plants in the STO configuration.
    Cheers
    Maruthi.
    Edited by: MARUTHI RAM on Mar 18, 2009 7:37 PM

  • STO Over & Under Receipts

    In our project 75% of our STO Receipts happens though EDI using WMMBID02 idoc type. There are always lots of shortages and overages happening during the Goods Receipt of the STO.
    Standard SAP does not allow over receipts to happen during Goods Receipt of a STO i.e. if 100 Cases was PGI’ed, system will not allow to receive 120 Cases at the time of GR.
    Standard SAP puts shortages that occur during Goods receipt of a STO as In-transits i.e. if 100 Cases was PGI’ed, and 80 Cases was received at the time of GR it will put 20 Cases into In transit bucket.
    What process was followed to handle such Over receipts and Under receipts during the Goods Receipt of a STO.

    Hi There.
    Normally you will have to receive the estimated amount (E.G. The original 100 on the STO) and then transfer the difference (or write-on and write-off) based upon the under/over delivery
    Your finance team will need to look at the movements to see if any special accounting is required (Intra/Inter company)
    Unfortunately there is not a clean method for this
    Regards
    Steve

  • Help creating a over under font effect.

    Got me on this one and could use some help or a link to some help creating an effect I am looking to do. Have two letters, a D & G. What I would like to do is put either the top or bottom of the G under the D to give it an over and under effect. Like a figure 8 if you understand what I mean. Any assistance would be greatly appreciated. Thank you in advance and I am using CS6 fully up to date.

    Bill & Sulaco, I so want to thank both of you for your help. Here is the final result of your help and exactly what I wanted. Also a pic of my layers to show how your help ended with me getting the results I needed.Help was really appreciated.
    This is my history and how I did it. You 2 really were a help and getting me thinking. Just could not wrap my head around this and knew it was an easy thing to do. Note some of the history was unnecessary and was eliminated afterwards.

Maybe you are looking for