Overall processing status issue for sales order regarding services

Hello,
I have the following issue. I am billing a standard service (service without delivery) to a customer. The process goes ok, I issue an invoice, post it and generate an accounting document. Then I create a cancellation invoice. Now I want to reject my sales order. I assign reason for rejection to the item. The header and item status says it is u2018fully rejectedu2019, but the overall processing status says the sales order is u2018openu2019 and therefore appears in reports regarding open orders. I gave also a billing block, deleted the schedule line for the service so that the ordered quantity for the item equals to u20180u2019, but still the overall processing status of the order is u2018openu2019. This is standard SAP functionality (as I checked it). So can anyone explain me how to change this status to exclude this order from open order list? Or maybe someone may want to explain me why this is standard SAP process and what is the reason for the system to want to keep my order u2018openu2019?
Thanks in advance,
BR,|

Place the reason for rejection in the status tab at item level, we are doing same, and the order lines does not show in open lines .
Regards
Chandrasekhar

Similar Messages

  • Credit status and overall blocked status of a sales order

    Is there a sap delivered business object that has a method to get credit status and overall blocked status of a sales order?

    Hi,
    Thanks for the suggestion. I have been looking at BUS2032. It does not give me a method that has the values of credit status  and overall blocked status of a sales order. I now am kind of convinced that I will have to extend this object. Can anyone please tell me the steps that I will have to go through to do this. I would like to know if I should write a new function module that gets the required data from tables like VBAK and VBSTT. Should I then call the function module in a method.
    Or should I use the getStatus method that BUS2032 provides and get my values from there. A little more detail to this is greatly appreciated.
    Regards,
    Gayathri

  • Quality inspection for the items issued for Sales order

    Hi, How to map the qc for the items issued for sales order?

    Dear Yadav,
    -Activate insp type 10 in the Material Master-QM view insp setup (MM01)
    -Create Inspection plan (QP01) with usage as Goods issue & assign Insp characteristics
    -Create Sales order (VA01)
    -Delivery against the Sales order (VL01N) or through sales order menu. Delivery Insp lot gets created after Delivery is made.
    -Do results recording and take usage decision (QA32)
    Note:
    -This inspection is non stock relevant inspection. There will be no stock posting through Quality Management.
    -Post Goods issue in the delivery can be made only after taking the usage decision.
    Regards,
    Keerthi.

  • BAPI For Create Goods Issue for Sales order with picked quantity

    Hi friends,
            Is there any BAPI available to create Goods issue For sales order with picked quantity...............?
    we hv used BAPI_OUTB_DELIVERY_CREATE_SLS
    with sales order .......its creating delivery order but not doing goods issue with piked quantity........

    pls,reply its argent

  • User status transfer for sales orders from ECC to CRM

    Hi,
    We use business process with CRM sales orders that are transfer to ERP.
    Users can change user status in the sales orders in ERP.
    How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
    What is the steps to do this for CRM 7.0?
    Denis

    Hi,
    We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
    We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
    In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
    Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so?

  • SAP Mobile Sales 2.0 delta load issue for Sales Orders

    Hello,
    we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
    Background
    Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
    During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
    Settings and troubleshooting so far
    We don't have any limitations for sales orders in CRM Sales Mobile configuration.
    We've run delta loads for all objects in transaction SDOE_LOAD.
    MAS_CUSTOMIZATION etc seem fine.
    We've re-run initial load for sales orders from CRM.
    In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
    Checked steps suggested in discussion
    SAP CRM 2.0 initial load issue
    Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
    If I change one of those historical sales orders in the backend, it gets sent to the device.
    If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
    To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

    First Doubt i got clarify by my self as we can go with Unwired Runtime option .
    But i still have doubt in :
    2. How can i Modifying the Main Menu for iOS.
    i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
    Same how can i do for iphone/ipad.

  • Dectivate pricing condition for sales order not service order.

    Hi,
    We are on ECC6.0 and CRM5.0
    I need to add new condition type to the existing pricing procedure.It should be activtaed only for service orders and not for sales order.I can achive this by adding new requirement in pricing procedure to limit this condition type based on order type.
    Example:  if KOMK-AUART eq ORDER_TYPE.
                    sy-subrc = 0.
    But I don't want to do this,because I would need to change this requirement everytime I add new service order type.
    Is there any field in Pricing structure KOMK bu using which we can achieve this. ?
    Please suggest any other idea by which I can achieve this
    Thanks
    Dona

    Currently ,we have one pricing procedures for both the scenarios...
    We control if the perticular condition type to be active or not by writing a requirement which checks the order types.
    This has been done this way because we  built the pricing procedure in ECC and tranfer it to CRM.Also we donot have service orders in ECC.
    any further alternatives guys..

  • How to restrict status profile for sales order.

    Dear Friends,
    Pl suggest me for follwoing scenario
    ►     As per business process for tender/ institutional sales and exports, the order is complete once the complete delivery and invoicing for the same has been performed.
    ►     It was also observed that a sales order may be modified (material, quantity, price etc) even after complete invoicing of the same has been performed in SAP.
         The requirement is  Possibility to enable a control to restrict any amendments to the sales order after complete delivery and invoicing will be explored as per business requirements.
    Is there any solution above scenario without writing any code.
    Regards,
    Atul
    Edited by: atul thakur on Oct 28, 2009 5:09 AM

    Mr Atul,
    My understanding is, you don't want your user to be able to change the pricing and order quantity once the order is complete, i.e Delivered and Shipped.
    The status profile will not help you in the above scenario, Price/Quantity changes will not come up as Business transactions that can be controlled at Status profile.
    Standard SAP restricts the price changes to a completed item of the order, so no need to worry about this.
    But order quantity can be increased any time.
    So to restrict the user to increase the order quantity you need to use the User-Exits that SAP provided.
    Use the MV45AFZB user-exit program and form  FORM userexit_check_vbap to code this.
    Hope this helps you.
    Regards,
    Aj.

  • Error while doing PGR (post goods issue for sales order return)

    Hello Gurus,
    I'm trying to do PGR for a sales order return. But system shows the following message: "Shortfall below the specified stock level or quantity amounting to 100 UN". (Message number : M7021)
    I've made some searches in SD forum but I didn't fnd appropriate answers.
    What does it mean ? How can I fix it ?
    Thank you,
    Bahia.

    Hi
    "Special Stock E not supported (check your entry)".
    This means your sales order (in your case the returns order ) is created with an item category which is marked with special stock indicator E  in VOV7 and the system is checking for that special stocks and it is not finding that
    When you mark any item category  with special stock indicator it can be E or Q or W ( it can be anything ) system will check for that particular stock category and not the general unrestricted stocks
    For you mistake can be two things
    1. Right now REN or RENN is wrongly marked with special stock indicator E  in VOV7
    If so remove that and try a fresh cycle
    2.The process you are right now doing is returns
    The original sale would have happened with special stock indicator E marked in its item category
    That means it is special stock
    That stock you might be trying to take it into general stocks now
    In that case right now you need to mark REN or RENN with special stock indicator E
    Note whenever you put your hand in VOV7 create a fresh order cycle and test and dont test it with already created order
    Note touching requirement classes are all big things to do in a project and not advisable lot many mistakes we can correct itself if we know order type ,item category and schedule line category
    Regards
    Raja

  • Status profiles for sales order

    Dear all:
      I use  status profiles to do sales order approve(BS02)
    who can tell me which business transaction can settle Sales Order can or not make to MD04?
    the standard business transcation:
    Acct. assignment order/project
    Activate final billing doc.
    Actual activity allocation
    Actual overhead (periodic)
    Actual settlement
    Automat. WIP/results analysis
    Change configuration data
    Complete
    Confirm order
    Create billing document
    Create changeable copy
    Create delivery
    Create inquiry
    Thanks a lot .

    hi,Imran  and rohit rathi
    thank you very much for you help,
    maybe I have't depict the problem,
    I use user status profiles to do sales order approve, i have defined a status profiles and assigned it to sales document type ,  i have defined two statuses  A00 and B00 in the  status profiles .
    I hope if the sales order in status A00,it'can make to MD04,when the sales order approved to status B00,It can make to MD04.
    but I don't know which business transaction  shoud I choose when defining the profiles' status A00 by t-code BS02.
    thanks and Best wishes.
    zeng
    Edited by: zeng zeng on May 31, 2008 11:37 AM

  • How movement type 641 E can post goods issue for sales order

    Hi
    One of our sales process need sales goods cross plant, form sales order type OR(the item required special stock E) to create delivery then auto generate PR , form PR create Stock Transprot Order, in vl10b generate delivery type is NL, when PGI this NL delivery, the message said 'Sales order stock 30001057 000010 does not exist' .
    I check the NL delivery movement type is 641 E, normally, 641 would transprot the goods to 'in transfer', but I could not find the reason why it can't create sales order stock  in 'in transport' .
    Any suggestion about that?

    Did you check whether stock is available for the particular material ?
    Is the material extended to the relevent plant, storage location ?

  • Status Profile for Sales Order

    Can anyone send step by step process for configuring Status Profile?

    Dear Anupa
    Being a senior member, dont you aware of the forum rules.  I am sorry to say that the informations you exchanged personally is definitely condemnable and we as a Moderator can ask the concerned panel to delete all your points.  But since I come across as a first instance, I dont want to do this.
    Please try to maintain the forum rules and also advise newbies to go in line with the guidelines.  Dont spoon feed them.
    thanks
    G. Lakshmipathi

  • Business object for sales order credit status

    Is there a sap delivered business object that has a method to get credit status and overall blocked status of a sales order?

    This forum is for general questions about Business Objects (the company) products and information; since your question pertains to SAP products you will want to find the forum that relates most closely to your question so you can have experts in that area helping you.

  • Problem after change item status procedure in sales orders.

    Hello experts,
    I have changed item status procedure for sales orders. But now all BDoc with queue name CSA_ORDER_xxxxx remain in state 'Written to qRFC Queue (intermediate state)' and needs to be reprocessed manually.
    No problem reprocessing.
    Have somebody any idea ?
    Best regards
    Juan Salom

    Hi,
       Is your inbound queue un-registered(type U)? Look at trx.
    SMQR
    and see if it is in un-registered. If yes, select the CSA_ORDER_*** queue and click on
    Registration
    button.
    If this does not help, re-generate your Bdoc services (for Bdoc BUS_TRANS_MSG) using
    SMOGGEN
    or
    using the generation workbench.
    Then try the delta once again and observe for queue and Bdoc status in the
    SMW01
    Hope it helps! Reward if helpful.
    Regards,
    Sudipta

  • Creation of Sales Order and Service Contract from Inbound IDOC

    Hi Experts,
    My requirement is to create a Sales Order as well as a Service Contract from one Inbound IDOC. I am getting the Inbound IDOC from a third Party. The message type is ORDERS and Basic Type is ORDERS02. How ever i am using an extension type IDOC which carries all the required data for Sales Order and Service Contract. My requirement is like, to create a Sales Order first.
    I have created a Z FM which is attached to the Process Code and subsequently to the message type. Inside the FM i an calling FM 'IDOC_INPUT_ORDERS' for creation of Sales Order. After that i am changing the IDOC data for the Document Type. I am changing the document type which is responsible for Contract Creation.
    Then I am again calling the FM 'IDOC_INPUT_ORDERS' for creation of Contract with the help of IDOC data. But here the Contract is not getting created. It's getting failed during the Batch input session.
    I need to solve this problem as soon as possible. Please help me. If there are any other options also please share.
    Thanks in Advance.
    Regards,
    Priyabrata

    Actually there is problem with BDCDATA. Inside the FM it's calling transaction with help of BDCDATA. If i am creating a Sales order or contract alone its creating successfully. But when i am trying to create both, it's retuning sy-subrc '1001' after calling the transaction on the second attempt. Is there any problem with BDCDATA like we can't handle with less time gap? Please help and give your inputs.
    Regards,
    Priyabrata

Maybe you are looking for