Overclocking MSI RS480M2

I'm using and athlon 64 3000+ with a msi rs480m2 mainboard, i want to overclock my system to 2GHz, how do i do it???

The RS480 and RS482 boards does not support overclocking. The BIOS locks you to the rated speeds of the CPU only, and the chipset as such has quite limited overclocking capabilities.
In principle you might be able to overclock these somewhat via software, but not much, and some of the MSI software available for these purposes is said to work on these boards as well, but it's not a supported configuration or meant to be done. The boards are not designed with overclocking in mind, rather stable and affordable desktop systems for normal office use.

Similar Messages

[Athlon64] Overclocking AMD Athlon64 on MSI RS480M2-IL

Hi,
I thought that MSI motherboard is good at overclocking, but the MSI RS480M2-IL do not have any option to overclock my AMD Athlon64 CPU.
I just built a new PC with the following configuration:
- AMD Athlon64 3000+ CPU (Venice core)
- 2 X 512 MB DDR400 2.5 CAS RAM
- MSI RS480M2-IL motherboard with 3.4 BIOS version
- AOpen H420B casing with 300W Power supply
- Seagate 250GB SATA HDD with NCQ
Anyone know how to change the FSB setting in the BIOS or any Windows program that can change the FSB setting so I can overclock the CPU???
I also have the following questions about the RS480M2-IL motherboard:
- My AOpen casing provide a 20 pins ATX power connector so do I need change the power supply with 24 pins ATX connector?
- I thinking of adding a nVidia graphics card so anyone have any problem with a nVidia graphics card on this motherboard?

Quote from: xlinkch on 06-July-05, 00:46:15
Vdorta: Can give more instruction how to run the ClockGen program??? Do I have to load it every time my Windows bootup???
I don’t have my computer at hand, so the following is from memory, aided by the ClockGen site:
1. Download the RS480-specific zip file to a folder and extract its contents.
2. Run the CG-ICS951412.exe file; click on the “Get” button to obtain the current FSB value; adjust the new FSB value you want (there are five values: 200, 204, 210, 214, 220). I tried and tested them all and they were stable in my machine, so I chose the highest, 220.
3. Create and save in the same folder a simple text file, for example, “filesave.txt” with a text editor (I used Notepad) with the following two lines in it:
[CG-ICS951412]
FSB=204
(where FSB is the value you have chosen from ClockGen.exe); every time you change the value, you have to modify the text file to include the new value, of course.
4. Create a shortcut to CG-ICS951412.exe; right click the shortcut and select “Properties”; add “-file=filesave.txt” to the “Target” field so that it should look something like this:
“C:\ClockGen\CG-ICS951412.exe -file=filesave.txt”
5. In order for Windows to load the program at boot, place the shortcut in the Startup folder.

MOVED: [Athlon64] Overclocking AMD Athlon64 on MSI RS480M2-IL

This topic has been moved to Overclockers & Modding Corner.
[Athlon64] Overclocking AMD Athlon64 on MSI RS480M2-IL

Quote from: xlinkch on 06-July-05, 00:46:15
Vdorta: Can give more instruction how to run the ClockGen program??? Do I have to load it every time my Windows bootup???
I don’t have my computer at hand, so the following is from memory, aided by the ClockGen site:
1. Download the RS480-specific zip file to a folder and extract its contents.
2. Run the CG-ICS951412.exe file; click on the “Get” button to obtain the current FSB value; adjust the new FSB value you want (there are five values: 200, 204, 210, 214, 220). I tried and tested them all and they were stable in my machine, so I chose the highest, 220.
3. Create and save in the same folder a simple text file, for example, “filesave.txt” with a text editor (I used Notepad) with the following two lines in it:
[CG-ICS951412]
FSB=204
(where FSB is the value you have chosen from ClockGen.exe); every time you change the value, you have to modify the text file to include the new value, of course.
4. Create a shortcut to CG-ICS951412.exe; right click the shortcut and select “Properties”; add “-file=filesave.txt” to the “Target” field so that it should look something like this:
“C:\ClockGen\CG-ICS951412.exe -file=filesave.txt”
5. In order for Windows to load the program at boot, place the shortcut in the Startup folder.

Has anyone bought the new ATI/MSI RS480M2-IL s939 motherboard yet?

Has anyone bought the new ATI/MSI RS480M2-IL s939 motherboard yet?
If Yes, How is It?
This seems from what I've read at least to be a good or even great overclocker, It's too bad that It isn't a full ATX motherboard, Maybe If sales are good enough MSI will use this chipset on a Full size ATX motherboard one day. Of course It does have an Integrated ATI video card in It and It have as much as 128Mb ram for the pci-e built-in video or You could add a separate pci-e video card in the 16x slot. It's $94.00 right now on pricewatch.com of course.
http://www.msicomputer.com/product/p_spec.asp?model=RS480M2-IL&class=mb

Quote from: mamisano on 23-February-05, 12:27:21
Ordered one for a home workstation from ZipZoomFly.com. Also picked up a 3000+ and already have 1GB of Adata PC4000. Will be utilizing onboard video until I have the need/desire to upgrade to PCI-Express video card. Hard drive will be a new Maxtor 250GB ATA-133 16MB Cache that I picked up from CompUSA for $99/no rebates :D
I will post my thoughts after the system is together, should have parts by Thursday/Friday.
Well at least You aren't buying from Logic Circle Systems That place will ship incompatible ram that is Intel approved and say then It is You cpu that is at fault, I should know I'd bought zoom3's motherboard and some Wintec ram(Samsung chips ending in TCCC) and They said they were tested and AMD approved(They aren't, Wintrec is Junk on an AMD Platform), I now have a Corsair CMX512RE-3200LL Dimm and My cpus work fine at PC3200 speeds and above, Logic Circle Systems said was at fault. Logic Circle Systems is a bunch of Liars and are not trustworthy.

[Athlon64] Now overclock your RS480M2-IL..!!

Dear fellows,
I was able to overclock my RS480M2-IL and so can you, with the help of a nifty tool available at http://www.cpuid.com/clockgen.php.
Download Clockgen for ICS951412 Ver-1.02 from this site, unzip the contents to a folder & run CG-ICS951412.exe provided in the downloaded zip.
Push the radio button 'Get Values".
Then push the slider given above the radio buttons to left to underclock or right to overclock.
I overclocked my 3200+ Winchester from 2000 MHz to 2200 MHz..... and guess what..!! it also works properly with 'cool & quite' without causing any problem.
At least something is better than nothing.....!!!!!
regds
harshvakil
RS480M2-IL
3200+ winchester
512mb DDR400
Hitachi SATA 160GB 7200rpm
XA52P SATA Combo

Quote from: Beartrap on 06-October-05, 00:18:10
I've just upgraded a Windows XP Professional..................I'm using the latest BIOS for the motherboard and have installed the version 5.9 drivers from the ATI website. All of the problems go away when I run a crappy old ATI Rage3D PCI video card, so this is definitely all related to the onboard video.
Please help me resolve these issues! Thanks in advance!
use the driver from here.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=639&kind=1

MOVED: [Athlon64] Now overclock your RS480M2-IL..!!

This topic has been moved to Overclockers & Modding Corner.
[Athlon64] Now overclock your RS480M2-IL..!!

Quote from: Beartrap on 06-October-05, 00:18:10
I've just upgraded a Windows XP Professional..................I'm using the latest BIOS for the motherboard and have installed the version 5.9 drivers from the ATI website. All of the problems go away when I run a crappy old ATI Rage3D PCI video card, so this is definitely all related to the onboard video.
Please help me resolve these issues! Thanks in advance!
use the driver from here.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=639&kind=1

MSI RS480M2-IL (MS7093) and Powercolor X800GTO 16 don't play nice?

I have a MSI RS480M2-IL (MS7093) mainboard. My mainboard's integrated graphics work perfectly fine, but after I plug in the PCIe graphics card, problems occur: screen flickering, slow PC response, CPU usage 100%. I have already disabled the internal video mode, set initial display first to PCIe and set AGP aperture size to 128MB in the BIOS. Please help. Now I'm using the onboard graphics but I would really like to use the PCIe graphics card.
FYI the PCIe graphics card I'm using is the Powercolor X800GTO 16 256MB GDDR3 256 bit 399.21/489.86. I haven't done any overclocking to the card.
Does my mainboard support Nvidia cards? I tried a Gigabyte 6800GS but there were stability issues.

I just cleared the CMOS and the card is working fine now.

MSI RS480M2-IL audio problem

Hi, i just set up my new pc with the MSI RS480M2-IL mobo and i am having some serious problems with the sound. i installed the ac97 codec from the msi driver page and here is what happens, the sound works only when i switch it to 4 channel mode or higher. And the worst part is when i go to websites using the adobe flash to view videos i get no sound at all, also programs like ventrilo dont work either. now i tried to reinstall the codecs and everything but nothing is working. oh and the sound works when watching movies on media player and other sites that dont use adobe flash. HELP PLEASE.

where do i find these drivers, i checked on the realtek site and google and i could not find anything. would you happen to have a direct link that would be great. also lets say i open youtube and watch a video which used adobe flash ,and i click on sound settings on adobe flash, i can see the sound bar moving like the sound is playing. so i really dont believe its a software or driver problem, can it be that it is a hardware problem? if yes, is there a way i can find out if i still have the warranty left on it? thanks

Can I Overclocking MSI B85M-G43

Can I Overclocking MSI B85M-G43 with Intel Pentium G3258? I'm A Starter....

You should be able to, with BIOS v3.7 or maybe later though there is no mention of it on support page.

Does the MSI RS480M2 sb400 chipset impose a hardware limit on SATA disc size?

I would like to fit a 1Tb sata drive. The Motherboard is MSI RS480M2, MS-7093 (v1.X) M-ATX Mainboard which uses ATI RS480 Chipset with an ATI SB400 Southbridge providing the SATA controller. At present I have two 200GB IDE drives fitted and one SATA DVD-RAM Drive.

Not that I know of, but you better test it before buying at a shop, then you are sure.
Normally it should work fine.

Overclock MSI Eclipse Plus with Intel Core i7 920

Hi,
I need help on how to overclock MSI Eclipse Plus with Intel Core i7 920?
Here are my system spec.
MSI Eclipse Plus
Antec Quattro 850W PSU
Corsair TR3X6G1600C9
120GB Sata HDD
Rgds

With a stock Intel CPU cooler, I don't recommend going past what default voltages can achieve, excluding maybe a memory voltage increase or timings adjustment if needed. Some utilities are very important to have before starting to OC such as Real Temp & CPU-Z. What are your CPU & IOH temps reading in bios H/W Monitor? The temps of the individual cores is also very important, which Real Temp will provide you with.
As mentioned, with a stock cooler, I would suggest not going past about 3.507 (bclk 167 X 21). Other settings need to be changed before this is done however. We need those temps too, before specific settings can be suggested. The last thing any of us want to do, is make settings changes & voltage recommendations that may damage your system.

[Athlon64] Problem with MSI RS480M2-IL

Hi all,
I have problem with MSI RS480M2-IL. My problem is My temperature is very high... around 55-60c ... i am using AMD 3000+ Venice and no OC... and SpeedFan unable to detect my Voltage usage... Aida32 also same... 1 more thing is when i tried to run SiSoft Sandra 2005... it will take alot of time to load, sometime will just hang. i Test PCMark04 and found only got 3k for average mark... my friend getting 4k+ and we are using same spec... Below is my Spec:-
MSI RS480M2-IL
AMD 64 3000+ Venice E3
Bios Version 3.8
Geil PC3200 DDR400 2.5-3-3-6
Maxtor 60GB HDD 7200RPM 2mb
Verudium Power Vortex 420W
Hope some one can advised me what to do... my score too low and my board detect temperature and voltage is not accurate... Hope MSI Engineer will look thought and help me... Thank for Viewing !

the underlying "Who's fault is it?" question: AMD64 VENICE CORE (E3) PROCESSORS? or MSI RS480M2-IL MOBOS?
so far, ALL users with this proc/mobo combination HAVE the high (or incorrect) temperature issue. replacing the mobo obviously will not resolve the issue but replacing the proc with one that is NOT a Venice E3 core, does the trick. but of course, not everyone will have the privilege of exchanging their damned proce via the retailer specially if it's beyond the first 21 days of purchase.
in my case, my retailer refused to have the E3 proc replaced with the 'corrected' E6 version no matter how hard you explained the known issues with the E3. no chance of AMD recalling the E3 cores since problems with are only isolated to the particular MSI RS480M2 boards.
so for users that are and will be stuck with this combination, what is the solution then to the temperature issue? in my opinion, it's up to MSI to perhaps release a bios update that will correct this. another important thing to consider is the question: IS MY VENICE CORE INDEED OVERHEATING OR IS IT JUST THE MSI MOBO SHOWING INCORRECT READINGS? the proc overheating in actuality is obviously a lot different thatn just having an incorrect bios temp readings.
based on what i have observed, my Venice core displays the correct cpu temps (33-35*C) when being used on a MSI K8 Diamond mobo. placing the proc back to the R2480M2 board shows a very unusual 61-63*C bios cpu temp. furthermore, if i touch the stock heatsink/fan cooler that i have (for both motherboards), it really does NOT seem to be extremely hot to think that the cpu is actually overheating. in addition, my system using the RS480M2 performs well and has no spontaneous shutting down problems whatsoever. of course, my sense of touch is not as accurate as a thermometer but more or less, if you consider all the points i mentioned, most of us can say that the whole issue is just a matter of incorrect cpu reading.
perhaps the ATI chipset is the one to blame since i have notices as well that the Venice core processors do not seem to have this high temp problems with MSI's K8 mobos with the NVIDIA chipsets.
one last question: so do you guys think that this problem can be resolved by a simple bios revision? (as a dell tech guy, i do know for a fact that bios updates resolves overheating error messages in Inspiron/Latitude laptops)

[Athlon64] MSI RS480M2-IL random restarts, BSODS etc etc

Hi, I just recently set up a new computer with the following:
MSI RS480M2-IL mobo
AMD 64 3500+ (venice)
CORSAIR XMS 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 400 (PC 3200)
WD Raptor 74gig 10,000RPM HD
I get a lot of random BSODs and even random system restarts frequently, when I try to play games (CS:Z), it would restart also, but after I turned off automatic restart, it just goes to windows. Also get random restarts when just browsing the web.
I ran memtest86+ on dimms 1 and 2 and found some errors in my ram, then I placed sticks in dimm 3 and 4 and ran memtest again for about 8 hours and found no errors.
Anyone know whats going on? I have all my drivers updated, I even updated to bios 3.4. Any help at all would be appreciated. Thanks

Disable the Fan Control in Bios PC Health Status Menu. The Fan Control has problems due to detecting the temp too low on CPU.
Are you running memory using Auto or Manual settings? Try Auto, as Manual has problems (or can be too aggressive for some memory). I would check to make sure you're stable and error free with Memtest86+ with any change. There is a Bios bug in Bios 3.3/3.3B3 that hasn't been confirmed in Bios 3.4. The bug shows as a blank/greyed-out RAS to CAS delay in CPU-Z, when Manual is used. The greyed-out setting is actually an illegal 7.
Also, did you install the AMD Cool'n'Quiet driver from AMD download and enable CnQ mode in Control Panel, Power Options by selecting "Minimal Power Management" as the Power scheme?
Danno

[Athlon64] MSI RS480M2-IL Dual Channel Trouble

My spec:
AMD Athlon 64 3000+ (Venice)
MSI RS480M2-IL (BIOS 3.4)
2 x 256 Kingston ValueRAM (KVR400X64C3A/256)
WD 1200JB
It works perfectly in Single Channel memory mode, but when I try to set Dual Channel, it just beeps and doesn't boot... I've tried installing memory modules in both blue and black slots.
Any advices on my trouble?

Quote from: Geps on 07-July-05, 22:57:00
did you already flashed the bios to the lattest? since the venice is quite a new core, and is probalbly not suported with your current bios.
it is know that dual channel wil not run with a venice core unless flashen to the newest bios
it was the first thing to do... BIOS 3.4, the latest one

MSI RS480M2-IL Periodic Audio Noise

I have an audio noise problem with my MSI RS480 Motherboard. The on-board sound periodically (every few seconds) makes a small noise (click?) and over longer intervals a skip of sorts. Also near the end of the Windows Logon audio I sometimes get a sort of brrrr noise. The noise problem occurs with all sorts of audio (i.e. audio CD's, streaming audio, Windows sounds, etc.). I assumed that it was faulty Realtek sound and I disabled the Realtek sound and installed a Sound Blaster Live Value OEM (Sound Blaster Driver Pack) sound card. It does the same thing with the Sound Blaster sound card but not as noticable. I decided to RMA the RS480 and order a new one. I just installed the new one and the problem is still there with no change. I still have the Realtek audio disabled and have the Sound Blaster sound card. The following three things have been suggested to me (in order) but only step 3 has been tried. I understand the purpose of step 2 but not the purpose of step 1. I plan to try step 2 sometime next week.
(1) Remove the RS480M2-IL and put it on top of a phone book and run the PC and test the audio.
(2) Switch out the Power Supplies and test the audio
(3) Replace the Motherboard and test the audio
My System:
MSI RS480M2-IL (Latest Drivers, Latest BIOS 3.3)
Windows XP Pro SP2
Seagate SATA 120 GB HD
Samsung 16X DVD-RW (Latest Firmware)
Samsung Floppy Drive
Corsair VS DDR Memory - 512 MB x 2 (1 GB) CAS 2.5 DDR400
Athlon 64 Socket 939 3000+ Retail
Antec SX635II Case (Antec SL350 PS)
3 80mm Antec Case Fans
Logitec 2.1 speakers (Tested on 2 other PC's with absolutely no problems)
Samsung 710N 17" LCD
Rosewill Optical Mouse
Liteon 104 Key Keyboard
Can anyone explain step 1, above.
Can anyone suggest any other test(s) to conduct to determine the cause of and solve my problem.
Thank you.

I am suspicious of the Antec SL350 Power Supply. I just ordered a spare 450W Power Supply. It should be in on Thursday of this week. I plan to swap out the power supply by Saturday. I already have an Antec SL350 in another computer (Don't want to do a swap out with that PC at this time.). The other SL350 moves a noticable amount of air (I would guess at least 4 times the flow of the one with the RS480M2-IL.). The air is warmer than I am used to (PC with RS480M2-IL) and the flow is almost undetectable. I checked the rotation of both power supply fans and they are both moving in the right direction.

Overclocking MSI RS480M2

Similar Messages

Maybe you are looking for