Overclocking the K8N Master2 FAR

Hi, I was wondering if anyone with the K8N Master 2 FAR board has had much success overclocking it.
I've checked through bios and either i'm blind or there isn't an option to lower the multiplier( Never OC an AMD 64).
I am at present running it at 215 x 13 but would love to get it higher.
Any help is appreciated.
Sean

Quote from: hanshot1st on 05-June-07, 05:19:26
I've owned this board since it was launched, and MSI never followed through with the promises of overclocking. No way to lower multiplier with 2 cpus.
Here I am looking for drivers for Vista, and downloads for this board have completely vanished from MSI global support. This is the first and last MSI board that I will own.
Balony, Vista is the problem, not this board or MSI.
Vista lacks a lot of drivers, if you want to complain about Vista, I suggest you write Billy Gates an email....as MS wants serious money for their Vista driver signing....this is not an MSI problem....M$ want more money....that's why Vista is lacking drivers.
It didn't vanish at all, this is a server/workstation board, so look at the right section at MSI, you will find it.
As for the OC part of this board, yes you can OC it a lot, no problem at all, will it bring you much? No it won't.
You have just 1 post here, so sorry, I don't take you very serious at all.

Similar Messages

Quick FYI: WaterCooling Block compatible with the MSI K8N Master2-FAR

If you're like me, you hated the noise from the stock CPU fans on the K8N Master2-FAR... well I did alot of searching and couldnt find any difinitive information about what fit, or didnt fit, on that motherboard as far as heatsinks or cooling blocks.
I just finished installing a water cooling system in my system, and I used the PolarFlo E-Series CPU blocks, and they fit perfectly!
http://www.frozencpu.com/ex-blc-218.html
Anyone else have any confirmed working heatsinks or water blocks for the K8N Master2-FAR board?

Hi
I`m using 2 of this
http://www.alphacool.de/xt/product_info.php/products_id/348/cPath/5_18_66_184/cpu-kuehler-xeon/wak-cpu-alphacool-nexxxos-xp-bold-xeon-603-604.html
with my 2 Opteron 265.
Case is a Lian Li PC7 SE-B.
Pic inside:
http://www.forumdeluxx.de/forum/attachment.php?attachmentid=22159&stc=1&d=1145233096
So long
Insane

K8N Master2-FAR - System fan shows 0 rpm ???

Hi, I just got the K8N Master2-FAR and equipped it with two dual core opterons 265 and 4gb of dual channel ram.
My biggest problem right now is that all the system fans are running at full speed, though the hardware monitor in the BIOS show 0 rpms for them?
At the same time my cpu fans are blowing at about 3600 rpms even though their temperature is only about 36 degrees C...
It sounds a lot like a jetplane, and I'm worried the case will start flying
- what to do, what to do???

Quote from: Djernis on 02-April-06, 18:15:14
I've got the system fans fixed now -Faulty wiring... my own fault
However the speed of the cpu fans are still running 3600-4000 when they are idle at about 36-37 C ???
like what i have said, u can use speedfan to control it..
@admin, soory for using msn stylo....

K8N master2-far doesn't detect Areca 1220 raid controller

Today i purchased the last components for my system. Everything works perfectly except for my Areca 1220 8x pci-e raid controller. As i feared the controller is nowhere to be seen, not in the bios, not in windows. I already had bios version v1.10 but flashed the bios version on the msi site anyway. Nothing changed. On the msi site under "QVL" i see my Areca at the bottom of the list. Does that mean that this MB can work with this controller? What must i do to make it work? I think i have to see it at least in the bios!
Your help is appreciated. Now 5x 300 GB of storage is doing nothing.

Quote from: Bas on 10-November-05, 20:30:00
Maybe you need to update the cards firmware.
I already looked into that matter and found out that the only way to upgrade the firmware or bios is to use their http tool McRAID Storage Manager. This of course is done in windows. Now windows doesn't see my Areca 1200 and so McRAID doesn't see it either. I can't update my Areca.
This problem is well known by the motherboard manufacturers. Let me quote something from the Areca site:
Q10150407 - Is there any socket 939 motherboards that work with your model ARC-1210 raid controller? In a SLI board I would use one 16x slot for Graphics card.
Our PCIe ARC-12xx series controller uses Intel IOP332/333 processor. The Intel high performance IOP (IOP331/332/333) has integrated the bridge chip in the controller. But the original NVIDIA nForce4 SLI chipset BIOS has the problem after Bridge IRQ routing. All controllers use Intel new IOP 332/333, such as Areca, Intel, and LSI have the same IRQ routing problem. Those NVIDIA 939 M/Bs can be worked in the Windows environment. Due to the Windows system takes over the BIOS job, and Linux & FreeBSD need to use the M/B BIOS, so it has problem with our PCIe controller.
Currently, DFI, Ausu, MSI and Gigabyte have BIOS to solve the problem. If you have problem in this kind of mainboard, please try to manufacture latest BIOS.
We have tested DFI Lanparty NF4 SLI & ASUS A8N-SLI Deluxe, and Asus A8N-SLI Premium. It works very well with our firmware 1.38 and newest mainboard BIOS. Try to swap the graphic and our controller, if you find some warm boot problem in the Asus A8N-SLI Premium.
I still think i need an updated bios for the k8n master2-far (ms-9620). The fact remains that there are problems reported with every SLI motherboard. I knew this already from the socket 939 platforms. I was sceptical about the k8n master2-far but thought that a server MB should have no problems. I did ask a question about this however at the shop where i bought this MB. I even found an reply from you to another user who had similar concerns about the Areca controllers and an SLI MB. You said that it should not be a problem. Even so i always kept the possibily open that this problem can happen. And here i am
Thanks for your help. More input is always appreciated as i am still waiting for an answer from MSI in the Netherlands about this problem. Right now my server is doing nothing. I hope my raid controller will work very soon.

K8N Master2-Far, Single 144 Opteron & Areca 1220

Hi
I would appreciate feedback please. I have already built a Gigabyte based Samba server using the Areca 1120 (PCI-X) RAID controller & 2 x Opterons.
For reasons too complicated to explain, I now want to build much the same thing but using a single 144 Opteron and the Areca 1220 (PCI-E) RAID Controller. This is JUST a Samba file server, it doesn't do games, isn't used for browsing the web, OpenOffice, etc. and sadly, will not be 'Folding'.
I was on the point on ordering a K8N Master2-Far, Areca, ECC RAM, PSU (dual-line !) etc. when I read some of the postings on this board. Now, I'm not so sure . . .
There appear to be a number of 'issues' with this MoBo. If you have built a system based on it, how has it gone ? What BIOS version are you using ? What PSU are you using ? I would be particularly interested to hear from anyone who has experience with it and with the Areca 1220.
Many thanks in advance.

Hi
I would appreciate feedback please. I have already built a Gigabyte based Samba server using the Areca 1120 (PCI-X) RAID controller & 2 x Opterons.
For reasons too complicated to explain, I now want to build much the same thing but using a single 144 Opteron and the Areca 1220 (PCI-E) RAID Controller. This is JUST a Samba file server, it doesn't do games, isn't used for browsing the web, OpenOffice, etc. and sadly, will not be 'Folding'.
I was on the point on ordering a K8N Master2-Far, Areca, ECC RAM, PSU (dual-line !) etc. when I read some of the postings on this board. Now, I'm not so sure . . .
There appear to be a number of 'issues' with this MoBo. If you have built a system based on it, how has it gone ? What BIOS version are you using ? What PSU are you using ? I would be particularly interested to hear from anyone who has experience with it and with the Areca 1220.
Many thanks in advance.

K8N Master2-FAR

Hi guys,N
I'm in kinda trouble. I bought this new socket 940 MSI motherboard K8N Master2-FAR.
The problem is the following. I dont know what power supplie to use for this type of motherboard. It requires 3 +12V connectors for JPWR1 (24pin), JJPWR2 (8pin) and JPWR3 (4pin).
Now most power supplies have only 2 12V cables , one for the 24pin and one for the 8pin. As its not enough this motherboard also requires a power supply that comes with a -5V pin supply (donno what that means).
For the moment i bought an Antec Neo HE500 watts power supply but he doesnt have a third cable (JWPR3) and doesnt support -5V pin supply. Antec replied to me that NONE of there new power supply supports this -5V pin supply
Can anyone plz help me? Maybe a list of compatible power supplies or the power supplie that MSI used to test this motherboard.
Greetz
Geoffrey

well ok,
lemme explain as clear as possible cause my english is not my native language :D.
1) In the manual of the msi mainboard is written that the power supply MUST COME with a -5V pin supply (Its very rare on a power supply cause even Antec, or coolermaster hasnt such a line). Now, i looked at the tested power supplys on that mainboard and I saw a ZIPPY power supply that comes with such a -5V pin supply. The -5V pin is located at the 20th pin of the 24pins connector.
Now this is the tricky part: MSI mainboard (8kN master 2far) Requires such a -5V BUT on the manual is a schedule of the 24pin connector on the mainboard itself. On that schedule is NOWHERE a -5V pin located. So why the hell do they require a power supply with a -5V pin supply when the 24pin connector doesnt have one. On the 20th pin is 3VSB located and NOT -5V as the zippy connector does.
Isnt this confusing...... .... how do i suppose the let my mainboard work properly when they give contradictionary information . I find that a 275€ mainboard may have a better manual .
Can anyone explain this? :D
Greetz Geoffrey

Windows XP won't load on K8N Master2-FAR after BIOS Flash

I downloaded the w9620nms.110 version BIOS from the MSI website and flashed the BIOS. Since that time, Windows XP Pro will not load successfully. I re-flashed to go back to the 1.00 version and even tried the 1.26 version I got from this site. Each time it still didn't work. I cleared the CMOS and retried. Still no good.
I reformatted the windows partition on the HDD (nVidia RAID stripe) and reinstalled windows. The installation seemed to go fine, but when the system tried to load Windows, it failed again. Just keeps re-booting.
Is there some setting in the BIOS that got changed in the flash that I'm missing that effects this? A setting that needs changing back (other than the SATA RAID which I've re-set and whish is recognized by windows and the BIOS).
Or, it is possible the RAID stripe was corrupted somehow?
The system worked for several months before the flash.
Any help on this is much appreciated!!
Running:
K8N Master2 FAR (v1.00 original worked, now v1.00, 1.10 and 1.26 current, don't work)
Single, Dual Core AMD Opteron 265
1x1GB Kingston kvr400d4r3a PC3200 RAM
Antec Neo HE 550 power supply
1x EVGA GeForce 7800GT (non-SLI enabled)
2x 250GB WD SATA-II HDD (nVidia RAID stripe) in two partitions
Sony DVD-RW
Windows XP Professional
Thanks,
Mark

Quote from: maz on 10-March-06, 02:24:20
I downloaded the w9620nms.110 version BIOS from the MSI website and flashed the BIOS. Since that time, Windows XP Pro will not load successfully. I re-flashed to go back to the 1.00 version and even tried the 1.26 version I got from this site. Each time it still didn't work. I cleared the CMOS and retried. Still no good.
I reformatted the windows partition on the HDD (nVidia RAID stripe) and reinstalled windows. The installation seemed to go fine, but when the system tried to load Windows, it failed again. Just keeps re-booting.
Is there some setting in the BIOS that got changed in the flash that I'm missing that effects this? A setting that needs changing back (other than the SATA RAID which I've re-set and whish is recognized by windows and the BIOS).
Or, it is possible the RAID stripe was corrupted somehow?
The system worked for several months before the flash.
Any help on this is much appreciated!!
Running:
K8N Master2 FAR (v1.00 original worked, now v1.00, 1.10 and 1.26 current, don't work)
Single, Dual Core AMD Opteron 265
1x1GB Kingston kvr400d4r3a PC3200 RAM
Antec Neo HE 550 power supply
1x EVGA GeForce 7800GT (non-SLI enabled)
2x 250GB WD SATA-II HDD (nVidia RAID stripe) in two partitions
Sony DVD-RW
Windows XP Professional
Thanks,
Mark
i have the same problem.... also i trie with win2000 an don,t reboot but halt on

MSI K8N Master2 FAR + 7800GTX problem

It doesn't work after install graphic driver.
I have tried few ver. of drivers(include the newest one)
Does anyone can tell me how to fix this issue?
My system spec.:
Dual AMD Opteron 246
MSI K8N Master2 FAR
2x Kingston 512MB DDR400 ECC+REG
Colorful 7800GTX
4x Hitachi 120GB 8M
OCZ Powersteam 520W Power Supply Unit
Has Been switched to Non-SLi mode.

Quote from: Nexus++ on 04-November-05, 06:55:31
It doesn't work after install graphic driver.
I have tried few ver. of drivers(include the newest one)
Does anyone can tell me how to fix this issue?
My system spec.:
Dual AMD Opteron 246
MSI K8N Master2 FAR
2x Kingston 512MB DDR400 ECC+REG
Colorful 7800GTX
4x Hitachi 120GB 8M
OCZ Powersteam 520W Power Supply Unit
Has Been switched to Non-SLi mode.
I have one question for you. The motherboard has three power connectors. A 24 pin , a 8 pin and a 4 pin. Looking at your specs i see that you have the OCZ Powersteam 520W Power Supply Unit. I looked at a review of this PSU and it has the following connectors for this: 20+4 connector and a 4+4 connector. So the 24 pin and the 8 pin connectors are covered. All the pci-e connectors i see are 6 pins, also for this PSU. What did you do with the 4 pin connector close to the pci-e slot?

K8N Master2-FAR MS-9620 (v1.X) - Adequate PSU?

Hey all,
This is my first post. Been having some post/ display issues as well as continuous beeps that do not stop until i turn the PC off. All turns on and runs, but absolutely zero display to the monitor and continuous beeps. No pattern...just beeps and black screen.
After much research, resetting cards, resetting ram,using single stick, single graphics card, etc. (not touching CPUs yet) - i've understood the PSU could be faulty. (thanks to another post)
With this board K8N Master2-FAR MS-9620 (v1.X) the manual recommends a minimum 600w supply as well as a -5V pin supply (page 2-8 of the manual)
Any education and advice on which PSUs in the current market are compatible for this board is greatly appreciated.
What should i be looking for?
What on new egg tells me the PSU has a -5V pin supply?
Build was done in 2006, pooped out in 2012 - life happens, and i'm finally getting around to working on it. Original PSU was 550W Cooler Master 'RS-550-ACLY'
Thank you so much, and i do hope that the PSU is the issue and not the board.

computer worked no problem before, for a solid couple years - pretty mcuh sat for a while
broke it down to troubleshoot: 1 cpu, new 1000 watt psu, 1 ram stick, 1 graphics card.
Interchanged out each individually and tested after each swap out - same results. Tryed different ram in different slots.
Just keeps beeping.
I did get a new case. Would the case front panel connections cause issues? hmmm? but this was having same issues in first case (just didn't have a speaker connected to board to hear any beeps)
maybe i should disconnect the case connections and then try booting without it connected?
i'll try that, but at the same time - i've been hunting for another compatible motherboard to support the devices....with these being from 2005/2006 and technology advancing so fast - finding similar ATX board, with dual socket 940 opterons and SLI ready capability is a bear.

Dose K8N master2-FAR support a opteron 275?

i have two 246s. but i need more computing power.
Can i use 275s with K8N master2-FAR M/B?
my system info:
M/B : K8N master2-FAR
MEM : Samsung ECC 512X2X2
HDD : Raptor 74d x2 R0 - OS
OS : win2k sp4
PSU : Enermax EG851AS-VH (660W)

Yes, see here:
http://www.msi.com.tw/program/products/server/svr/pro_svr_rcm.php?UID=613

I want to buy 2 MSI-478 Retention Modules for the K8T Master2-FAR

Where to buy P4-478 Retention Modules for the K8T Master2-FAR? I would like to have a Choice in heatsinks, I know that 478 clipon heatsinks may work, But Where do I buy the Retention Modules for this motherboard, Since real 478 Retention Modules are worthless when It concerns this K8T Master2-FAR motherboard(I bought one and It's in a really cheap and flimsy case), I ask as 603 heatsinks are mainly for servers and aren't too useful to Me, A new one that I've seen looks great, But It's passive, has 4 heatpipes, Is about 80x80mm in width and has no place for fans(bummer). I'd love to use the SP-94, But again It won't work as It is a bolt on 478 and as such It won't work, I'd also like to use a pair of Thermalright XP90(XP92?) heatsinks, But those may not fit as They use 92mm fans, So far the only heatsink that would be workable is the SLK-947U as It has the 478 Clips, I have one on one of My 2 other PCs(Nforce2 chipsets), 80mm fans would still be the max, But at least the heatsink would not be too bad. I just need the 2 retention modules with the 603 hole spacing that MSI made, On the other hand being the screws use a 3mm thread, I should be able to find those elsewhere, Somewhere. I just need one pair I might add. This is cause others have reported that Xeon water blocks do not fit(This was over on forums.2cpu.com).

Bump...
Actually since MSI had these Socket 478 Retention Modules custom made for this motherboard I may have to call MSI and ask, Since I was told a Xeon based Danger Den Maze4 Water block will not fit on this K8T Master2-FAR motherboard without the water block being modified slightly. And I suspect My motherboard was not New, It was I suspect in fact a Returned motherboard (a refunded purchase) and the reason I say this is cause the motherboard box (tab) was bent as It seems to have been inserted into the box a few times and the manual had one corner bent over slightly.

Hi everyone, few questions about the K8T Master2-FAR;

Hi,
Ive just registered with this forum and have been reading all the messages and find everything very interesting. I know you probably have all heard the same questions before and I am really sorry for asking them again but I just need to clear some things up in my head. Before I ask the question I just need use all to know that Im far from a computer expert so pretty please dont go into to much technical detail. This is actually the 1st computer I built myself. (Everyone I come accross in the desing world is G5 Mac this and G5 Mac that, so thought I would build a system that matching the G5). If you think something is to hard to myself I wont be offended:) Im actually at uni studying Media Design so use my machine for Dreamweaver, photoshop, flash, afterfx and some movie editing etc and some programming......
(Hope i havent bored everyone already)
My comp:-
K8T Master2-FAR
2x Opterons 242
2g ram(pretty decent memory i think!)
nVidia GFX5500 256mb
Maxtor sata 120g Hard Drive
My questions are:-
1) When I had finished building the comp I remember CoreCentre showing a reading of 3600 (the multiplier was sitting on 20 i think!!!) yet I can get nowhere near that now. The highest I can get is 1760, 220x8 mhz. Has anyone else experienced this?
2) If my processors are 1.6 ghz why is the lowest reading not 3600 mhz? This really confuses me and makes me believe that only 1 processor is doing its job. But I know that cant be it because at startup its states 2 cpu's and when I press ctr+alt+delete there are 2 cpu boxes. Is it a problem with corecentre?
3) Can i, and if so, where and how can i increase the multiplier? When I was installing something big(think is was final cut studio) the multiplier went upto x9 but that was it.
4) I think this is most important, I only have the BIOS version that came with instalation cd. I have ran LiveUpdate and doesnt show anything under the BIOS bitty. Where can I find out what bios version I have? Im quessing I have version 1.0 and from reading this forum for a week and working up enough courage to create my first post, I noticed people talking about version 1.4. the BIOS sound pretty important so can someone email me the newest version and a dummies guide to installing(if thats what its called lol) it. My home email is [email protected].
If anyone read this then thank you very much and if you reply I would be very gratefull.
Thanks again
liam

Hi,
You need to remove CoreCenter and install CoreCenterPro, those are different versions.
As for the multiplier, that can't be upped with Opterons and the current BIOS'ses won't even allow you to change it at all.
Maybe the upcomming 1.4 BIOS will change that, but I'm not sure as I didn't see the feature in BIOS 1.4B7.
Anyway, stay away from the 1.4x BIOS'ses at the moment, as most will render the board dead.
At the moment overclocking the Opterons on this board isn't possible.
I can't even do much with my FX-51 as the BIOS doesn't have those features.
It might change when MSI release the final 1.4 BIOS, but the latest beta still has many buggs.

K8N Master2 FAR: Windows 2003 doesn't recognise install to RAID SATA

Summary for those that cant be bothered reading:
PCI slot: 1 gfx card:
SATA 1+2: WD HD.
Raid 1 used.
-Trying to install Windows 2003 small business server premium.
-Installed SATA drivers (both from floppy).
- Generally windows will stop at 'Setup is starting windows'
It has gone past that point and gets to the drive select/install screen BUT:
-- Using the drivers from the floppy disc, the RAID1 array shows up, but shows boths drives. From my experience it should just show one drive, the array. Both bus/ID were the same and it said they were on nvatabus.
-- Without using the drivers from the floppy it shows both drives, same bus/ID but on atapi.
Tried installing windows but it won't boot after install. No matter what I choose to boot from (Tried NVida array first but I got desperate and tried booting from every other device using ESC @ boot).
Mainboard faulty?
END SUMMARY
K my spec should be in my profile sig so thats sorted.
The problem I'm having is driving me insane(er). The two WD sata drives are plugged into sata1/sata2. raid is enabled in the bios and on the sata channels. Made the drives mirrored using RAID 1. Ok thats all ok so far.
Start the windows 2003 small business server premium and press f6 so it asks for the raid drivers. Select both the raid driver and nvidia storage controller drivers (I've tried just choosing only 1 as well).
Ok so after this it carries on until it gets to "Setup is starting windows" (something like that). Generally at this point it will hang. I've left it for a while incase for some weird reason its going slow - nothing happens. So I read the MS KB and it said to disable and remove everything not needed. Well there wasn't anything to remove physically from the board so I tried disabling bios stuff. Disabled: lan/audio/1394/serial/parallel i think that was all. So I tried again.
Same thing happens. Try a few more times, using both drivers on the floppy disk like before. Strangely enough once it worked. HMMM. Next problem is when it got to the drive select screen, there were two drives there . From previous experience raided drives show up as one. Both drives were though on the same ID and Bus and on nvatabus...(something...) . So I thought, maybe thats just the way this board works.
Installed windows fine, reboot and won't boot. The raid array is marked to boot. Tried manually choosing boot device with ESC. Tried reinstalling again not using the floppy raid drivers and it picks up both drives, this time same id/bus but on atapi, not prefixed with nv.
Why is this such a problem? I just want to raid 1 two drives and install windows to them!

Thats the whole point. The two drives were set as raid1 in the raid bios, as described in the manual. The raid1 array was described as 'healthy'. Windows install kept seeing the 'array' as two seperate drives. I've used raid many times before and never had this.

K8N Master2-FAR Cool n' Quiet BIOS settings

Am I missing something? the cool and quiet BIOS settings do not appear in my BIOS cell menu. The user manual shows them there, but they are not in my BIOS setup? running v1.30
thanks

My K8N had it.
Look here:
https://forum-en.msi.com/index.php?topic=95822.msg726354#msg726354

K8N Master2-FAR with two opteron 275 it works?

sorry by my ingles, I use google to translate

It should work, check the QVL list to be sure...

Overclocking the K8N Master2 FAR

Similar Messages

Maybe you are looking for