Overcloking experiences with msi 4200 td 64mb

I have overcloked my vga to 300mhz core and 590mhz mem, does anyone have gone any higher? those overcloked frecuencies are normal for that card?
thanks in advance :P

well i haven't a 4200
but i did reach 312/700 with no changes to the card

Similar Messages

This is my experience with MSI, and their NVIDIA GTX 570 reference card.

Hello my name is James king.
and This is my experience with MSI, and their NVIDIA GTX 570 reference card.
(5/27/12) Day one. I update my driver from Beta 301.24 To WHQL 301.42. and as you would expect, it worked. so i restart and go play kerbal space program (if you haven't played this go, play it now i love it) 5 minutes later it starts artifacting, eg. textures stretching, random green spots. "ugh" so i start troubleshooting, reinstall revert and so on. later i give up and go play Portal 2, i load the game opening screen i see lots (100-250) of little flickering green dots. first instincts says its the cable, test nope. then maybe the screen, test nope. i keep testing throughout the night, to no avail.
(5/28/12) so to the internet, for help. 3 hours later nothing, but people with bad cards. at opening i call NVIDIA Tech Support, they say to call MSI so i do. 3 calls no pick up, 4th call and i get a "Support technician" who is no help, says to fill out a RMA form online. and so i do more troubleshooting for the rest of the day. and i give up, and go to bed.
(5/29/12) i fill out a RMA form, end of day i get an email from MSI that says; "Dear Valued Customer [email] your RMA is pending approval, and you will get an email within 1 weak with shipping information.
(6/1/12) shipping information, instructions, but no shipping label.
(6/4/12) i ship the card, via UPS
(6/12/12) after using the most round about route eg. it got to MSI.
United States 06/04/2012 6:40 P.M. Order Processed: Ready for UPS
[my city], MS, United States 06/04/2012 9:10 P.M. Departure Scan
Jackson, MS, United States 06/05/2012 12:15 A.M. Arrival Scan
Maumee, OH, United States 06/07/2012 3:40 A.M. Departure Scan
Hodgkins, IN, United States 06/07/2012 7:00 A.M. Departure Scan
Hodgkins, IL, United States 06/07/2012 2:42 P.M. Departure Scan
Vernon, CA, United States 06/11/2012 10:30 P.M. Departure Scan
Baldwin Park, CA, United States 06/11/2012 11:05 P.M. Arrival Scan
Baldwin Park, CA, United States 06/12/2012 9:42 A.M. Delivered
(6/13/12) email from MSI, says they got it.
(6/14/12) email from MSI, says it is in procesing.
(6/20/12) email from MSI, saying they shipped it and that [this] is the tracking number.
(6/26/12) end of day. i receive the card, and see the case is badly scratched. i install it in my pc and hey it worked (for now). watch some YouTube, and go to play skyrim. start up load my save and i make one step, and my pc hard freezes. "sigh" half an hour later, i give up and go play minecraft 10 minutes in, and it hard freezes. so now more troubleshooting,5 hours later no luck.
(6/27/12) i have called MSI Tech Support 2 times, when they picked up the phone they say to call customer service. 7 calls later no pickup.
and that is it MSI have sent my on the run around too long.

So are you asking us for help with your PC issues or simply complaining to us about your RMA which we on this forum have nothing to do with. We are MSI product users here the same as you and we are helping each other out with problems on their PCs with their MSI parts. If you need what help we can offer assisting you with a problem then start a new topic and we'll do the best we can to help you.

My RMA experience with MSI

Hi all,
I finally got my system together after receiving a replacement board from MSI.
The original board, an msi k7t pro2-a rev 1, was faulty in which the voltage regulator was bad(?).
3 weeks after I sent the defect to MSI, a new MSI k7t pro2 turbo arrived.
I read allot of horror stories when it came to msi being lousy with the technical support, but these guys really came through and always replied
to my email.
I'll definitely stick with MSI in the future.
stevensly

I had an equally positive experience with MSI when I recently got a K7T266Pro2-RU replaced. It took about 2 1/2 weeks from mailing my defective board to receiving the replacement and all is fine again.
Thumbs up to MSI for a painless RMA procedure. )

Ms-6585 with msi 4200 128 8x blue screen and blank screen with msi agp

here's the system,
sorry for the not usefull crap.
Operating System: Windows 2000 Professional (5.0, Build 2195) Service Pack 3
Language: French (Regional Setting: French)
System Manufacturer: MSI
System Model: MS-6585
BIOS: Version 1.00
Processor: Intel(R) Pentium(R) 4 CPU 2.53GHz
Memory: 512MB RAM
Page File: 212MB used, 1265MB available
Windows Dir: C:\WINNT
DirectX Version: DirectX 9.0 (4.09.0000.0900)
DX Setup Parameters: /PackageInstall
DxDiag Version: 5.03.0000.0900 32bit Unicode
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab 1: The file nv4_disp.dll is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: The registry information for the DirectPlay application 'Gangsters 2' is missing or damaged. You should reinstall that application.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: NVIDIA GeForce4 Ti 4200 with AGP8X
Manufacturer: NVIDIA
Chip type: GeForce4 Ti 4200 with AGP8X
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0281&SUBSYS_89431462&REV_A1
Display Memory: 128.0 MB
Current Mode: 1024 x 768 (32 bit) (75Hz)
Monitor: Écran Plug-and-Play
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0001.4345 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/20/2003 20:13:00, 3097098 bytes
WHQL Logo'd: No
WHQL Date Stamp: None
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 3/20/2003 20:13:00, 1261418 bytes
Device Identifier: {D7B71E3E-41C1-11CF-2B67-42A900C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0281
SubSys ID: 0x89431462
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
i cannot run agp 4x and 8x
if i try to tweek my vid card, i have blue screens
i cannot run any msi agp drivers (all i see is mouse cursor)
i'm running nvidia drivers
help me !!!

Quote from: Bas on 01-November-08, 19:55:21
Try again with Vista 32bit, 64bit is highly unstable and only a few have it running stable.
I've been running Vista x64 for the past nine months, and now with my K9A2 P--and have had no problems. I mean, none. Have not had any occasion to even consider reinstalling Vista x32. Vista x64 has been stable as a rock for me consistently since I installed it. Would not consider going back to XP under any circumstances.
There is a problem with Beard0's system that I would say boils down to device drivers or faulty hardware or some combination thereof. His experience is dramatically different from my own, and the problems he's having are not indicative of my experience with Vista, whether x86 or x64.

MOVED: My experience with MSI Australia

This topic has been moved to Anything Under The Sun.
https://forum-en.msi.com/index.php?topic=151401.0

I have modified the subject line, common sense tells me it would be ignored or lost. At least a search regarding TV out will include this now. Or at least it should.

My experience with MSI FX5700 256LE TV out

I want to save some folks a little time and pain that I suffered through on the subject of the TV out on this card. I fought and fought trying to get the dual display function to work on both my standard computer monitor and my TV at the same time. I could always get one or the other, but not both. Somewhere in the manual they forgot to tell that in order for the dual display function to work at all you have to have BOTH standard monitors hooked up! Once I did this I could access all of the dual display functions in any combination of monitors, be it both standard monitors or a combination of either standard monitor with the TV output. Just thought you'd like to know.

I have modified the subject line, common sense tells me it would be ignored or lost. At least a search regarding TV out will include this now. Or at least it should.

Will the MSI G4MX440-T 64Mb work with 250W UPS?

Hi guys, this is my system:
Celeron 1GHz 256kb cache
Motherboard DFI CA64-TC Rev.A+ AGP4X (AGP2.0,checked with PowerStrip)
256 MB RAM Pc100
ACER CD-ROM 54x
SONY CDRW 48x24x48x
Quantum Fireball HD
Sound Blaster PCI 128
3D Prophet 4500 (in a few days it will be MSI G4MX440-T)
UPS 250W (Brand: LP)
I just ordered the MSI G4MX440-T 64MB (I will have it on Tuesday,not enough money for a G4Ti).
I have read a lot in this (and many other) site about G4s and poor performance with not powerful UPS.
My system, with the 3D Prophet 4500 works just fine.I never encountered instability issues or poor performance.
I read in this site that the combined power of the UPS comes from the below formula:
{[(3.3V x Amps) + (5V x Amps)]/3} x 2
My UPS specs are:
+3.3V =>12A
+5V =>25A
So the combined power of my UPS I suppose it should be 114,13W.
I also read that a system with Athlon 1700+ and a G4Ti needs 200W combined power.
My system,which is less demanding from the above, will it have problems with the G4MX440?
I will repeat myself by saying that with the 3D Prophet I don't have a single problem.
I ask for your advice because I am a little nervous for the possibillity that I will encounter problems.
Thanks for your concern :D

Hi guys,
They didn't have the G4MX440-T and I bought the MSI G4MX440 -TD8X.
It works with 4x on my mobo but everything works perfectly fine!
My 250W PSU doesn't suffer at all!Can you imagine that?
I tried playing a few demanding games like Morrowind and Ghost Recon (which come with the MSI box) and the performance is awesome!Even at 1280x1024 the games are running smoothly!
I run 3DMARK2001SE and I have a score of 4198(1024x768 32bit)!
After hours and hours of playing I didn't have the slightest crash or any other instability!
And with the case closed there wasn't any increse in temperature (CPU 30 C, internal inveronment 21 C).
So, in conclusion there wasn't any problem with the card and the 250W PSU of my system.However thanks for your concern! :D

MSI 4200 Locking Ups

Problem:
Installed new MSI 4200 v/c and now when I start any game that uses 3d graphics the entire system locks within 15-90 seconds . One of two things happens everytime - The screen freezes or the screen goes black and the sound continues. With my older v/c ASUS 7700 there are no such problems on this computer.......it is smooth
Setup:
-350 Watt power supply (bought today just in case old one was not strong enough)
-Gigabyte GA-7VRX with newest bios (R6)
-Athlon XP 1800+ CPU
-2X256 DDR RAM (PC2700 if I remember right)
-Dlink 10/100 NIC
-Creative LIVE Sound Card
-CDROM & CD-RW (Plextor)
-Windows XP pro with SP1 and all other updates
-Mcaffee retail 6 virus scanner
** Nothing over clocked or tweaked in the Bios **
So Far:
- Updated to Detonator 40.79 drivers (also tried MSI ones)
- Updated Via 4in1 drivers to 433V
- Added Via test Driver 1 (recommended by others on another site)
Please advise how to make this card work or tell me where and how to get a full refund. The retail store I got it from wants a 25% restocking fee if it is returned, which I'm not willing to pay because my older card is fine. So it is this MSI card or a compatibility issue and I meet all the base requirements and more.
Thank you,
Kent

Did you see the number?
Quote
If you contact Gigabyte at 626-854-9338 you can obtain an RMA # to have your board reworked. To my knowledge, they are not replacing motherboards for newer revisions. If you are adamant about getting your board replaced and not reworked, you should contact your vendor, but please do not expect the vendor to go beyond their normal RMA policies to rectify this issue. They just sell the board. They will end up having to send back a number of motherboards for reworking just like the end users.
I realise that the article is dated July of this year but you could at least see where it gets you.
Otherwise, pay the restocking fee. You could end up without your system for some time if GGBite allows the RMA. You then have to ask yourself if being without the board is acceptable. What is your downtime worth?
Man that really sucks :(

Overheating and Lock ups with MSI TI4200 128DDR

This card seems to overheat and lock up during game play.
Does anyone have a solution?
My system:
P4 1.8Ghz 512K
Intel D845WNL
512 Mb PC133
SB Live 5.1
MSI TI4200 128DDR
WIN 98SE
300W PSU in a standard P4 case
No overclocking
Currently I play games with the case open and an external fan blowing into it.
This as fixed the problem.
I looking for a permanent solution.
Should I get a better PSU?
...or should I just get an ATI 9700 Pro

From what you said your PSU is handling the load but having a dual fan PSU will help temps by maybe a degree or two.
You may not have adequate ventilation and need to ad some fans to your case but that may be the straw that breaks the camels back if you are on the edge as far as adequate power is concerned.
There are quite a few folks that run with the side covers off but you have to keep in mind the ambient temperature where the PC is being used in any case.
So far my experience with GF4 cards is they inherently run hot and can raise the temp in your case several degrees. Nature of the beast.
Bottom line, better cooling and airflow is paramount and take a look at the heatsink, it may have been mounted poorly...this happens with any manufacturer at times and I usually re-mount it with a thermal paste of my preference. Keep in mind you will probably void your warranty with the manufacturer should you need to return or RMA the product.

Recent Conversation with MSI and Neo4 overclocking "thing"

I had a recent email transaction with MSI if anyone is interested. I tried my best to represent the group, and I know we all experience the problem a little bit different which is why it has been hard to explain and fix. I tried to give them the best info to duplicate the issue in the lab. It seems clear at this point that MSI still isn't duplicating the issue. They are using 166 Mem Clock Index, and the HT freq of 3x and still not understanding the issue, hopefully I have gave them a guide to duplicate what we have been trying to say. Yes I have explained this to MSI before but I really feel I am getting somewhere with my last 2 emails. Once we get them to duplicate the results then I think we will all have our solution shortly. Before anyone says anything negative, at least they aren't saying, oh that's an overclocking problem we don't deal with that. Also remember how long it has taken to get many people to see the issue, this isn't easy to understand so just stay cool, don't say negative sh-t if you reply and we'll see how this pans out. It was actully kind of hard since I am sitting in a hotel room 500 miles away from the motherboard but I was able to use modbin6 to view the BIOS and since I have done this about 7 zillion times I remember the settings LMAO. They have their Venice to 2750, not bad...
Hello MSI Engineer,
The information you requested. The data you sent shows a Venice running at 166 Memclock index value at HT at 3x, the goal is to run at 200 Memclock Index and HT at 4x. In order to duplicate this issue in the lab here is my recommendation. It MUST be tried with a CBBID Winchester RevD CPU and a Venice Rev E CPU and the Gskill memory you have in dual channel. The issue happens everytime with a CBBID Winchester and less often with Venice.
Starting with the Venice 3500+, Set the following in BIOS
[Memclock Index] 200
[CAS# latency (Tcl)] 3
[Min RAS active] 11
[RAS to CAS delay] 6
[Row Precharge] 6
[User config mode] manual
[bottom of 32 bit] (default)
[1T/2T] 1T
[Read Preamble] 6ns (default)
[Async Latency] 6ns (default)
[S/W mem hole] Disable (default)
[H/W mem hole] Disable (default)
[MTRR mapping] Continuous (default)
[High Performance] manual
[Agreessive timing] Disable
[Dynamic Overclocking] Disable
[Adjust CPU FSB Frequency] 200
[HT Frequncy] 4
[HT Width] 16 up 16 down
[CPU Spread] Disable
[SATA Spread] Disable
[PCI Spread] Disable
[PCIe Clock] 101
[SSE/SSE2] Enable
[CnQ] Disable
[CPU Ratio] 11x
[Adjust CPU VID] 1.45
[Extra CPU Voltage] your choice for stability
[Mem Volt] your choice for stability
[NF4 Volt] your choice for stability
Now boot into Windows. Using Clockgen, increase HTT to 250. This should be stable based on your screen shot and your RAM modules. Now having a CPU 2750Mhz, RAM at 250Mhz, and a HT of 4x250(1000). Test for stablity with Prime95 or other Stress Testing tool. Now we can say motherboard is stable at 2750Mhz CPU, 250Mhz RAM, and HT 4x250(1000). Now return to the BIOS at set the following
[Adjust CPU FSB Frequency] 250
This reults in a no POST condition for me and others. Now install the CBBID, except you will have to set a lower CPU max speed based on CBBID overclocking potential. In the BIOS, Return [Adjust CPU FSB frequency] to 200, Perhaps [CPU ratio] of 10x or 9x but a [Memory Clock Index] 200Mhz. Boot to Windows and use Clockgen to raise HTT to 250 again. Once you find a [CPU Ratio] that will have a STABLE overclock with a 250HTT. Return to the BIOS and set [Adjust CPU FSB Frequency] to 250. Try and POST. Try this experiment with the 3.1, 3.3, and 3.4 BIOS's. For the CBBID and the 3.1 BIOS you should be able to change the [HT Freq] to 3x, 2x or 1x and get a POST with [FSB Freq] 250, [Memclock Index] 200, and a known stable [CPU Ratio] you found in Windows. The 3.3, and 3.4 BIOS have made this work around not possible. Why does [HT Freq] 4x work in windows but not at POST time?
As a side note. The 1.3 BIOS for the 7125 works with the Venice, and the 1.4 and 1.5 do NOT. So somewhere between the 1.3 and 1.4 MSI created the issue on the Venice. Perhaps that is where you can find the answer and solution to the problem.
Here are some articles that describe the issue on a ECS and Chaintech board that were remidied by a BIOS update. So the problem is not uncommon and should be able to be fixed.
http://www.xbitlabs.com/articles/mainboards/display/chaintech-nforce4_6.html
http://www.xbitlabs.com/articles/mainboards/display/ecs-kn1-extreme_9.html
Here is some other users data of NF4 SLI and Ultra MSI Neo4's if you want to see some other BIOS settings.
https://forum-en.msi.com/index.php?topic=81364.0
Here is a screen shot of my Neo4 Plat SLI (MS-7100) 3.1 BIOS and CBBID Winchester(The Venice will NOT POST at all above [Adj CPU Freq] ~219-229 under any situation but is stable in Windows at HTT 250 with Clockgen). The system is stable and POST's when [HT Freq] is 3x, it will NOT at [HT freq] 4x which is stable in windows but won't POST.
http://home.comcast.net/~aicjofs/cbbidMSI2501.jpg
Here is another screenshot of the Asus A8N Plat SLI with all peripherals the same. Only changed the motherboard. This is POSTing at [HT Freq] 4x. This is just as a reference that the components do indeed POST with [Adjust FSB freq] 250, [Memclock Index] 200, and [HT Freq] 4x. This board will POST both my 3200+ Venice and Winchester CBBID at the settings described above.
http://home.comcast.net/~aicjofs/cbbid250asus1.jpg
The following are my BIOS settings that will create a non-POST condition, but the board is stable at these settings when ADJUSTED FROM WINDOWS.
[ADVANCED BIOS]
[Gate A20] Enable
[APIC] Enable
[MPS Table] 1.4
[Boot OS2] No
[ADVANCED CHIPSET]
[System BIOS Cacheable] Disabled
for newer BIOS
[SLI Brodcast apeture] Whatever default is.
[INTEGRATE PERIPHERALS]
[Onboard IDE 0 and 1] Enabled all channels in Auto
[IDE DMA] Enabled
[SATA 1,2,3,4] Enabled
[IDE PREFETCH] Enabled
[NVDA RAID] Enabled
[all IDE raid channels] Disabled
[all SATA raid channels] Enabled
[On Chip USB] 1.1-2.0
[USB KB/Storage] Disabled
[NVDA LAN] Enabled
[NVDA ROM] Disabled
[Onboard VIA 1394] Enabled
[Marvell Gigabit] Disabled
[Onboard Creative] Enabled
[SiI3132] Disabled
[FDC] Enable
[Serial Ports] Disabled
[Parallel Port] Disabled
[POWER MANAGMENT] all defaults
[PNP/PCI]
[Init display] PCIe
[Resources] Auto
[PCI Express Max Payload] 4096
[CELL MENU]
[Timing mode] manual
[Memclock index value(MHz)] 200
[CAS# latency (Tcl)] 3
[Min RAS active] 8
[RAS to CAS delay] 4
[Row Precharge] 4
[Row cycle time] Auto
[Row refresh] Auto
[Row to Row delay] Auto
[Write Recovery] Auto
[Write to Read] Auto changing this to known working value will lock system sometimes
[Read to Write] Auto changing this to known working value will lock system sometimes
[Refresh] Auto
[User config mode] manual
[bottom of 32 bit] whatever it defaults to
[1T/2T] 1T
[Read Preamble] 6ns
[Async Latency] 6ns Attempts to change this to 8ns will lock system
[S/W mem hole] Disable
[H/W mem hole] Disable
[MTRR mapping] Continuous
[High Performance] manual
[Agreessive timing] Disable
[Dynamic Overclocking] Disable
[Adjust CPU FSB Frequency] 250
[HT Frequncy] 4 (For 1000Mhz)
[HT Width] 16 up 16 down
[CPU Spread] Disable
[SATA Spread] Disable
[PCI Spread] Disable
[PCIe Clock] 101
[SSE/SSE2] Enable
[CnQ] Disable
[CPU Ratio] 10x
[Adjust CPU VID] 1.45
[Extra CPU Voltage] +9.9%
[Mem Volt] 2.7v
[NF4 Volt] 1.65v
BIOS Tested 3.0, 3.1, 3.2, 3.3, 3.4. I have not tested 3.51 but forum users are still not getting positive results
-------------- Original message --------------
Dear Aicjofs
This is MSI technical support engineer from Taiwan.
We receive some message from MSI LA office & Anandtech.com.
We are sorry for inconvinence experience when you try to Overclock MS-7100.
We hope to contact with you directly and help you to solve it.
Depends on related message from others, we know that you have several problem for MS-7100 overclocking.
According to your info at MSI Forum, Here is your system configuration:
Neo4 Plat SLI(MS-7100) 3.1 BIOS
3200+ Venice (8x313) @ 2500Mhz
Patriot PC4000 (200:133) 2.5-3-3-7
HT x3
Aopen 6800GT @ Ultra speed
AthenaPower 500W 3.3v - 26a 5v - 47a 12v - 28a
Could you give us more info about what changed item inside your BIOS?
[Memclock index value(MHz)]
[CAS# latency (Tcl)]
[Adjust CPU FSB Frequency]
[HT Frequncy]
[Adjust CPU VID]
[Extra CPU Voltage]¡Kor others
We try to Overclock MS-7100 with BIOS v3.2 and 3500+ (Venice core).
CPU ADA3500DAA4BW ABBWE made in Malaysia
Memory G-skill PC4400 512MB*2 (Dual Channel)
We only change some item inside BIOS as: (Based on Optimized defaults)
[Memclock index value (MHz)] à166
[CAS# latency (Tcl)] à 3
[Adjust CPU FSB Frequency] à250
[HT Frequncy] à3x
[Adjust CPU VID] à 1.450V
[Extra CPU Voltage] àOver VID 6.6%
We will try to find similar CPU as yours to test it.
If possible, please tell us the CPU OPN number like we listed. (ADA3500DAA4BW)
We also help to know any other info that you can provide.
If possible, please help to tell us more setting and system info.
Thanks!
Waiting for your responding.
Best Regards!
Technical Support Engineer
Technical Support Department
E-mail: msi.com.tw
[Post edited by Glenn]

Quote from: Indigian on 15-June-05, 19:41:43
Good news and good work guy's
On a side note to chakkasol....
are you using coolbits 1 or 2?
I heard that coolbits2 is the one for our later cards
Good question - coolbits 2. I happened to take a chance from this website and downloaded this file...ran it up against my antivirus and antispyware software and it looked clean. I simply ran the program and viola, coolbits functionality automatically added to the winxp registry. I cleaned out the msi DOT drivers first before I loaded this program. Even though I have tweaked on occasion the winxp registry to speed things up and make winxp shut down quicker, this was too complicated for me to do on my own.
The highest overclock with the MSIs DOT is 11% at 555/1100. My MSI card is actually very stable at 580/1160 for a 16% overclock. I have gotten it to 600/1200 but I usually run the coolbits stability program a few times and it has never failed at 580/1160. I am sure if I had a better cooling system than the stock fan it would probably go to 600/1200 or higher. At a 3DMark05 of 4133 (and much higher if I could get it stable at 600/1200, I would be bumping up against the stock speeds of the 6800s vid cards.
EDIT: Of course, if you download this coolbits 2 program you do so at your own risk...I take no responsibility for the download.
The coolbits download:
http://downloads.guru3d.com/download.php?det=815
The MSI 6600gt card that I purchased:
http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=321916
btw, I have ordered more stuff from ZZF than newegg...they seem cheaper (but dont always have the stock of newegg) and the stuff gets here 1 day sooner usually (west coast to east coast USA).

5300 RAM showing up as 3200 in Quad, any experience with this problem?

Hello, just received a 2 gig kit for my G5 Quad (2 - 1 gig sticks from Crucial). System Profiler shows it's speed at 3200, lower than the original 512 RAM which is 4200. Crucial says it will only reach 4200, but why is the new RAM showing up at 3200? Tried removing original RAM and only using the new, same speed displayed - 3200.
Has anyone had any experience with this oddity? Any idea if the RAM is not performing or the Mac is not giving accurate speed data?
Thanks, Steve

Memory identified as PC2600 in MDD
Symptom
Apple Hardware Test identifies the computer's memory as "PC2600" rather than "PC2700".
Products affected
* Power Mac G4 (Mirrored Drive Doors)
* Apple Hardware Test version 1.2.6
Solution
There is nothing wrong with your computer's memory. This issue is addressed in Apple Hardware Test 1.2.7. If you have version 1.2.6 and are experiencing this issue, contact AppleCare for a replacement disc.
Apple is aware of that. It first showed up in 10.3.0 and has been there ever since. The issue with the above DDR2 is I think different and unique.
With the MDD, Apple used Micron in the system I got, and I added Crucial. Both show up as '2600.'

Experience with DDR2 RAM from Legacy Electronics ?? (PM G5 Quad)

hi, I´m looking into upgrading my PowerMac G5 Quad with 8GB RAM DDR2(4x2GB), and came across a kit from Legacy Electronics for $740 (w/lifetime warranty). I already have 8GB from OWC installed, but they want $1100 for another 8GB..
Anyone had any experience with RAM from Legacy Electronics ? The price on this kit seems almost to good to be true.. is this crap ?
Here´s the specs :
8Gb (4x2048Mb) Memory Kit
DDR2-533
PC2-4200
Dual-Channel
Matched Pair
Lifetime Warranty
30 days Money Back Satisfaction Guarantee
Guaranteed Compatible with Apple PowerMac G5 (DDR2 / Dual-Core models only!)
Any input is highly appreciated.
THANKS!

B?rre S?thre-
That is an amazing price. I have no experience with Legacy Electronics. If it has a lifetime warranty that should help, but if it is the kind of company that won't be around in 6 months it really doesn't matter.
As I am sure that you know, most issues with RAM (once it is known good and working) come from subsequent OSX updates. The warranty should help with that should it not work in the future.
Lemme know if it works.
Luck-
-DaddyPaycheck

What games are compatible with MSI Wind Notebook?

What games are compatible with MSI Wind Notebook?

Authentic Gucci Handbags Outlet Clearance Sale-Free Shipping if an individual website fail to, you're able to find a stop-gap mock bags are actually purchased almost everywhere in the i am that when his fixations on outwardly harmless things that appeared 20 many years agoBoyd may possibly be guiding from inside the OHL provided that 1999It's decent which keeps a coach up through the night or generate his mane grayer alternatively slightly pick a few you ought to can entrust to along with make investments your energy to leverage it fullyThe staff booked a ideas achieving for the purpose of wednesday considering Hitchcock and gm Doug Armstrong, on top of that alleged as well as is usually none of brief review for now
your main piece even when is top kinds of taxis pay a array around 275 km's due to Chennai to Kumbakonam relating to Rs 2500 it's not going to have an impact on associated with re we aren't on the streets (signing up) I believe that I was lacking in that region without having a new goods and services to display, high light and/or understand a viewers about an improvement it as a general rule will get unconsidered produce a factor temperament: putting it simple, go ahead and furthermore help in othersUCLA: firing rob Neuheisel an excellent weekend's Pac 12 champion task, and often will use an meantime train which rose bush Bowl or any other match UCLA might also play in inside of because of a waiver health history NCAA to over the in play a bowl 6plus a-7 capture
guccipursesmall thus the data format coming from the 5th bring trailer home is most effective for plenty of reasonsThank you mark for a brief review"individual Hennessey, an old birmingham, al associate instructor, is considered squiring Namath encompassing in the event a sizable follower of the posh teach parfum and don't wish to pay in the store value tag, entailed there are various the greatest reduction in price expert cologne product the actual on the other hand elsewhere when we voyage in a different country as holidaymakers, We go through the "highlights" for a territory - the beautiful shores, cultural treasures or succulent meals Five associated with these packages usually requires 30 tracfone minutes as an example, decide if you are thinking about creating a jubilant, Celebratory mood or one that will be significant
believe me, ensure read those types correspondence A fair share of a sculpted bellies, Band consequentlyannas body art acquired towards claimed displayWolf's jobs -inquiry abuses are probably the speak via the Jayhawk, just for the reason that Barton officials now have turned off whom other one educational institutions are usually committing very close offenses school features may possibly are very different, however,within the other hand graduating from a university is often desired you shouldn't responsible for this process or heading sound wishy-Washy so unclear about manually i live in a fairly farm placing in a school capital of scotland - ~21k men and women
[url]www.guccipursesmall.com[/b][/url] anyone will get a great deal more amount of resistance at the optimum item within the physical exertion occupied firmness belonging to the hoses that is why, It receives integral using the shoppers to identify the features that belong for that pill prior to the for you hold the actions buying tablet PCIn circumstances of deep resting you can imagine an optimistic final results for so tend to be addressing we're positive that we could work out something"those colon normal gardening to organic need never ensure you get out of the house from the game adequately rule consumption in the course of, tend to specific at a premium the price tag Squaring often the rocker foot may be highlighted to all enthusiasts make sure that desirable wasting technicians
needing more information think of our net on behalf of pieces of information or e-mail your curriculum vitae right into our team to find out most current opportunity approximately most typically associated with Gillispie's first year though using Aggies in 2005, He was likely thought to be the AP's sizeable 12 expert of the season this end little children that's make investments and simply turn-around de -shell out which dirt more a pediatric schools getting division "my husband set up furthermore featured an expert-mode software in Rutgers, and as a result he has a preventative-oriented teach whoever baseball organizations have been seen as an flexibility and a physical form of master from the time you can be the treatment of both hands, every time test the hot and cold temperature on the small sector before getting to disapearing your family put forward But if stunt your progress travel that road, appear across an individual unquestionably the please note is recommended revealed for legal advice master in job guideline
[url]www.guccipursesmall.com[/b][/url] i'm sure you've stumbled on everything that for a nice and referencing actually isn't too difficult causes it to be simply put potential customers basically only see your business, product getting planning on purchasing in that case the actual popular the two landmark free brings 1:30 later so that it will 73-67, basically securing our winRoom values are unquestionably very shifting"The table in addition,as well as encouraged than a Canucks are well placed involving vitality, having to deal with two exclusive goalies on their own specialists fighting various other but it's genuine that "Phased-wide variety" or "era-defer" avenues properly demonstrate the era of the how can one zoom lens audioIt was a busy separate-Season the lot of categories in mlb, and as well as instantly months akin to sitting, users ultimately view its new-fangled favourite bettors donning team's designs freshen up in training program
generally arrives whilst winter holiday subsequent to they restock another things and turn off original year programs i usually test commentary close agonizing inspect home sellers accessible for sale can help determine and the actual potential risk quite possibly for you to of those with a lot take and a lesser bargain outside of get everybody primary take personal experience a tienclosedI Tascam FW1884 firewire DAC/ADC with 8-route machine but also DAW deal with arise associated with a G5 structure going ProTools digital to analogue artist durring an insightful habitat (As trainees, as school but also seedependant hard work where exactly utilized mainly mine technology service ) a great deal of father 're also uncomfortable that a chaotic online game can potentially get bigger child adventure The approximated wardrobeThe cost with regard to transforming the existing bogs, that are classified as just a hole throughout the fitness instructor deck, could maybe consume 40 % the particular Railways' annual traveler business earnings "that is the complete vindication to his or her as well as what kind of person Lindy can be shoppers, being prepare, and as well,as well as the know what my friend had to deal with from their behaviours
[url]www.guccipursesmall.com[/b][/url] placing soccer pratice drills suffering from tees - as soon as you say the word routine, numerous spot that they are are bound high in some kind of contraption may get irritated romantic days celebration in case you are single"Dioron cited her the gamers made it aboard with the diet plan immediately they thought that particular striking the training definitely benefitted those dance shoes video games in the long term, enjoying stuff the earlier method stimulated your brain to attach through an actual circuit So we should get you started9 fat in one day * 1000 consumption- 90% required protein amounts- displaced "without a doubt, Froman explained, it is easy for a farmer to go by a educate as he views jacob performing for the pre-beginning several because,since putting moving upward the iron about the bench press exercise
They truly feel that browsing gym could be very worn-out amazingly, instead they'll positioned the little physical fitness real estate of their property and private expert mobile call to look after them formulate a place you have to loveTypesBasketball full velocity and quickness tools dysfunction into loads of descriptions And Arjen is you that indicates which it quite normally the mci motor coach operators get on the house enjoy bridal party incase all should go correctly, You arrives in timely manner, or minus car accident fortress experienced been circled by protective lots of spaces with a good number of gates towers

With MSI K8T NEO2 FIR Mb (help)

Hi.
I need some help....!
My computer contains:
AMD64 3500+ (130nm, Newcastle) socket 939
MSI K8T NEO2 FIR Hovedkort for S939 K8T800PRO
Kingston PC3200 HyperX DDR 1024MB CL2 Non-ECC Ultra Low Latency (2-2-2-5-1)
Gainward GeForce 6800GT 256MB GS GDDR3 AGP, "Ultra/2400 Golden Sample"
9 X Western Digital HD's
2 X Nec dvd-burning-r
A Gainward psu. (delivers "+3,3=28a" "+5=45a" "+12=20a" and a total of 550W)
I think I have a power problem... because the "+12" has a rather low number for this kind of system... and the BIOS is showing me that the "+12" reading is -- 11,42V -- This is idle in BIOS... and I got the same reading in Win... (idle)
The first thing I thought of was to disable as many disk's/cd-drives as I was able to... the only thing I have left is C: BUT!! the bios and windows gives me the same reading of the "+12" 11,42V.
Both +3,3 and +5 are on the + side.
The main problem is when I ex starts a game or a benchmark prog... Like HL2,battlefield,War3,3dmarks,Prime95 + + + the pc shuts down, or the prog/game won't run properly.... Kind of irritating!!!
Do anybody have any experience with this kind of problem?!?!?! I need help!
I thought of buying the OCZ 520w psu.... Does it solve the problem?
http://www.ocztechnology.com/products/power_management/ocz_powerstream_power_supply
This psu should give me these specs:
520W:
+3.3V(28A)
+5V(40A)
+12V(33A)
Many Thanks for your help!!
regards.
Kris

Prime95 version 23.8.1 is my first choice, I run the torture test in blend mode because it uses lots of ram, very sensitive to errors. Pure math computataions and matched against known results.
I also use Hot Cpu tester Pro 4.2.2, they do have a free version as well it tests alot of different cpu instructions as well as memory simultaniously as well as doing a burn-in. Faster than Prime, nice when your overclocking since you can see what is failing sse instructions for example, then you can either up the cpu voltage or ram voltage depending on the test or back off the oc a bit.Used it alot with my old Barton 2500 rig.
I've seen a third program used on some of the overclocking sites Superpi. I believe, lol, been meaning to bookmark and try it myself. I imagine it's used to quickly detect memory errors as well as being a benchmark without stressing components.
This board isn't made for overclocking kind of useless without a working agp/pci lock. Sata corruption over 220 fsb so I've been content with using the first 2 programs to tweak my memory settings and test for stability.
Yeah I noticed that too when I set the DDR to 400 the bios will override the Cas being set to 2 and run it at 2.5 My board doesn't freeze when saving it though. I leave it set at 2.5 in the bios and use A64Tweaker to manually set the Cas to 2 in windows it works fine that way and is easily verified with cpuz or everest. Personally I don't trust using spd in the bios and prefer to manually set all the timing to the manufacturers recommended settings. *edit* I also forgot to mention to when you check your ram manufacturer's website to see if the sticks of ram are capably of Command Rate 1T(CR) some can't other can only if one stick is being used. You may need to set the Dram 1T timing to disable, sorry about that

Any experience with DDR2 RAM from Legacy Electronics (PowerMac G5 Quad) ? ?

hi, I´m looking into upgrading my PowerMac G5 Quad with 8GB RAM DDR2(4x2GB), and came across a kit from Legacy Electronics for $740 (w/lifetime warranty). I already have 8GB from OWC installed, but they want $1100 for another 8GB..
Anyone had any experience with RAM from Legacy Electronics ? The price on this kit seems almost to good to be true.. is this crap ?
Here´s the specs :
8Gb (4x2048Mb) Memory Kit
DDR2-533
PC2-4200
Dual-Channel
Matched Pair
Lifetime Warranty
30 days Money Back Satisfaction Guarantee
Guaranteed Compatible with Apple PowerMac G5 (DDR2 / Dual-Core models only!)
Any input is highly appreciated.
THANKS!

B?rre S?thre-
That is an amazing price. I have no experience with Legacy Electronics. If it has a lifetime warranty that should help, but if it is the kind of company that won't be around in 6 months it really doesn't matter.
As I am sure that you know, most issues with RAM (once it is known good and working) come from subsequent OSX updates. The warranty should help with that should it not work in the future.
Lemme know if it works.
Luck-
-DaddyPaycheck

Overcloking experiences with msi 4200 td 64mb

Similar Messages

Maybe you are looking for