Overdelivery not allow eventhough overdelivery maintain in production

Dear all,
SAP Version : ECC 6.0
While doing GR for Finish Material ( GR qty is in the range of Over delivery) in CO11n t.code. SAP showing an error message i.e Order qty excedd by XXXX. However, we have maintained Overdelivery Allow field in Production Order or Material master Workscheduling View.
Ideally , this error message shouldn't be display at the time GR of Finish material.
Could you please advice ..
Thanks
Neeraj

HI Prasobh,
Hope you also doing well..
Thanks for your response.
Yes , I checked using MB31 transaction & found the same error message i.e. order qty exceed by XXX pc.
Secondly , we have some COGI errors for this order. Mostly for 261 Mvt.
I tried using co11n transaction . We are getting '"order exceed" error at the time of Goods Movement for Order material & failed goods movement materials goes in COGI. Then using COGI, same Order material can be post sucessfully without in change in qty. I wonder why system not checking Overdelivery value at the time of GR using MB31 & Co11n etc ... but in case of COGI transaction it's done sucessfully.
Recently SAP got upgrade to ECC 6.00. I haven't found such issue in 4.6 C . What you think ..May be this because of Upgrade ?
hope you understand my issue
Thanks
Neeraj

Similar Messages

SBO 2007B PL18 is not allowing me to close certain production orders

Dear All,
Please help me in the problem I am facing while closing a few production orders.
SBO 2007B PL18 is not allowing me to close certain production orders and flashing messages like:
1) Invalid Account Code [Message 173-9]
2) Unbalanced Transactions
Kindly also advice...how to close my previous questions.
Thanks in advance
Edited by: Jimmy Robert on Jul 19, 2010 1:28 PM

Hi,
You may check these first:
Invalid Account Code Error In Prod. Receipt
Invalid Account Code (Message 173-9)
To close your previous posts, you just need mark them as answered.
Thanks,
Gordon

Adobe customer portal site does not allow me to choose my product and coninue

How can I contact Adobe Support when I get the below screen with the continue button greyed out? It does not allow me to choose my own product "Captivate" or any other one.

Thank you for helping, it still gives me the same problem though. It does not allow me to select my product (Captivae 4).
I also have some more challenges:
When I email the support email address for Africa I get no response.
When I change my region to Africa it defaults back to USA.
I am in the process of buying a multi user licence for the entire Adobe suite for my company "MTN South Africa" and is concerend about the above in case we need support from Adobe. Using the USA server is incredibly slow and we waste a lot of time opening the forums, knowlege base etc. I just timed it by clicking on the "support" link and it takes 26 secpnds to open. You can imagine wating half a minute when you navigate through the forumes, help files. support etc.
Thanking you in advance for helping.
I include an image below of the "continue" buttom that is "greyed out".

Overdelivery not allowed

i have a production order, and it is partially confirmed, with qty 16,128.000 already delivered. i then edit it, and put in a 2 % over delivery value. planned qty is 20000, and with a value of 2% over deliv, system should be able to allow me to confirm 24000. however, when i try to confirm 4116, system shows me an error saying that "Up until now only 20,000.000 BX confirmed for predecessors 0720 / 0" however in OPK4, config is to warn me only when i over deliver. why is this happening?

wht is the "0720" error?
please go to error details and explain it descriptively.
Wht is diagonosis.? in the error detail , check it
Regards
Pravin

Manual reservation for order category 10 not allowed

why cant i make any manual reservations for a production order? is this possible or i can i configure the system to allow this?

>
R Brahmankar wrote:
> Dear,
>
> It is not possible.
>
> You entered an order whose category only permits automatic reservations. The following order categories do not allow manual reservations:
>
> 10 PP production order
> 20 network
> 30 maintenance order
> 40 batch order (process manufacturing)
> 50 inspection lot
>
> When convert the planned order into production order, reservation will take place.
> This planned order is created by mrp run.
> Without running mrp, you are creating production order manually.So not possible to reserve.
>
> Order reservation will be created in issuing plant for components if u create production order manually.
>
> Plese check the "Plant"assigned in for the 2component in the "Component Overview" of the Prodution order.if it is 0002, order reservation will be created in at 0002 .
>
> Regards,
> R.Brahmankar
can this order category be configured?

Error in COR1 - Material not allowed to use

Hi,
Material is in the stock "unrestricted use " but does not allow to use in a production process order. All related options are verified for example : MB51, MMBE, Date of production is prior to use, Quality is OK, Not in blocked stock, not reserved for some other order, same material was in use from same batch till 02.06.09 suddenly since 03.06.09 a error pops up during batch determination during creating a " Process Order " through COR1.
Regards,
Suresh

Check the Cross plant Material status in Basic data and plant specific status in MRp1 in the material master.
look for material master changes
Regards
Ratan
Edited by: Ratan on Jun 22, 2009 4:17 PM

Transfer to R/3 using mixed periodicities is not allowed

Hi,
We are in the process of implementing DP for one of our clients,
We are facing the following problem, while releasing the Demand ( as PIR) to SAP R/3.
Transfer to R/3 using mixed periodicities is not allowed
We have maintained below mentioned steps;
1.Periodicities of Planning area maintained only weekly buckets.
2. Maintain Transfer Profile (SAPAP/MC8U)
3. Define activities for Mass Processing (SAPAPO/MC8T)
4. Create Demand Planning for Background job
(SAPAPO/MC8D)
5. Schedule demand planning in Background (SAPAPO/MC8G)
6. Through SM37 I checked the Spool List.*Error: Transfer to
R/3 using mixed periodicities is not allowed*
Kindly request if anyone knows provide solution.
Regards
Sadasivam R K

I think you can have only month, quarter and year in your storage bucket profile when you release forecast to ECC.
Anything lesser than that will give you an error when you release forecast to ECC.
If you want to send forecasts in weekly buckets, then you need to maintain the period split profile (Transaction /SAPAPO/SDP_SPLIT - Maintain Period Split Profile ) and assign this profile to the transfer profile.

Reservation not allow manual

Dear Gurus,
any one please tell me how to allow manual reservation for order category 10.
following is the error message.
Manual reservation for order category 10 not allowed
Message no. M7126
Diagnosis
You entered an order whose category only permits automatic reservations. The following order categories do not allow manual reservations:
10 PP production order
20 network
30 maintenance order
40 batch order (process manufacturing)
50 inspection lot
System Response
The system does not accept your specification.
Regards,
qsm sap

Hi Qsm,
Order category 10 is Production order. For production order system will create an automatic reservation through the order.
So it is not possible to create a manual reservation.
Can u plz explain the business need to create a manual reservation for a production order?
Thanks & regards
Mahesh
Reward points if useful

Sales order does not allow make-to-order production

Dear Friends,
I am trying to do do planned order for sales order in MD50 it was showing the error message as
"Sales order does not allow make-to-order production"
Can any one solve this
Shakthi

Hi Shakthi,
It is also possible to set the priority for Requirement Type determination like
0 Material master strategy, then item category and MRP type
1 Item Category and MRP Type
2 as 1, with check for allowed requirement type.
The transaction for this is same as "Requirement Type Determination :
Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
Look for "Source".
In this transaction, Please, check "Requirements".
Please, make sure of the following 2 things :
1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
I hope this should solve your problem.
Regards,
Sandeep

Set type COMM_PR_UNIT is not allowed for product type

Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
Set type COMM_PR_UNIT is not allowed for product type
What can I do? I think that is an ABAP problem
Thanks in advance
Rosa Rodríguez

Rosa,
This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
Thanks,
Jagadish

Why am I not allowed to activate my product, CS3, when the product is bought years ago and I still have the serial number? It's an old version, but I don't throw products in the bin, just because they are old.

Why am I not allowed to activate my product, CS3, when the product is bought years ago and I still have the serial number? It's an old version, but I don't throw products in the bin, just because they are old.

And what exactly is your problem? Other than going of on a tangent about Adobe's alleged evilness preventing you to activate whatever CS3 product, you have not provided any useful info such as what exact problem you have, what system, what product we are axctualyl talking about and so on.
Mylenium

Material status in master data set not allow create production order. but..

Dear All expert.
There is one case I don't understand, the component material within BOM had been set material plant status which it is not allowed to create Production order ( Porder header Msg & PO/Network item msg = B in OMS4).
If user use tx:CO01 for create production order, the error message block production order can't be created. It is good .
However, when user is using Tx: CO41 to convert planned order to production order with that material ( status which not allowed to create production Order) . it is successfully without any error message .. User successfully create production order without limit.
Therefore, is there any configure in IMG was wrong?
thanks for reading.
Marco

Dear R.Brahmankar,
I had followed your instruction to check. It is very helpful.
when I check program in CO41 (saplcoup), I found that it only check material status (FG) on top level of BOM .
Its don't check component material.
Function CO_ZF_CHECK_MATSTAT_POS component item in BOM , the program will not check item plant status.
When I use TX: CO40 to test. I found that CO40 with Program LCOSD1J - CHECK_MATSTAT_COMP have component material status check.
I'm not sure is that genic CO41 don't have component material status check?
ths alot
Marco

Deletion without archiving is not allowed in the production client

Hi Gurus!
I have a new problem with regards deleting products in the Production system in CRM. I can't seem to delete the product in Production Box using this report(COM_PRODUCT_DELETE_SINGLE). It gives me this error: 'Deletion without archiving is not allowed in the production client' I'm doing this to solve my issue with regards some of the products not having any Sales and Distribution Data. The steps i did below worked in QA box.
These are the steps i did in the QA box to delete the product:
1) I've deleted the products that has no sales data using the report COM_PRODUCT_DELETE_SINGLE. I went to COMMPR01 to tag the said products with a status 'To Archive' then saved it before I triggered this report.
2) I've registered it first in the table COMC_PR_TOOL_REG and filling up the necessary parameters
3) After Deleting the said products in CRM, I logged into R/3 to access the material (MM02). I just changed the sales text and saved it to trigger the replication in CRM.
When I checked the product in CRM, it worked. The Sales and Distribution Data is already shown.
Now I have a new problem with regards this procedure. I can't seem to delete the product in Production Box using this report. It gives me this error: 'Deletion without archiving is not allowed in the production client'
I have already followed the same procedure as to what I did in the QA box but for some reason it didn't work in the Production Box.
Could anyone please help me with this. Thanks!
Thanks & Regards
Nathan

I was able to solve the problem.
In Report COM_PRODUCT_DELETE_SINGLE,there is a special check in order for the productive system detection.
The logic in this program has a perform check_authority which will automatically produce the error and prevents you from deleting a product in the production system.
Solution:
I copied the program COM_PRODUCT_DELETE_SINGLE to new one ZCOM_PRODUCT_DELETE_SINGLE then I placed a comment on the PERFORM check_authority.

Flag Unlimited Overdelivery not purpose from material master for po with as

Dear.
I have a material with flag unlimited overdelivery filled in the material master purchasing view.
When I convert a pr to a u201Cnormalu201D purchase order (without account assignment) the system rightly purposed this flag.
When I convert a purchase requisition with project account assignment category (category Q) in the po the system donu2019t set this flag.
Do you know the reason of this behavior ?
Thanks in advance.

Do you reference a contract in case of the project purchases?
then check the contract if different tolerances are setup there.
maybe it is caused by a program bug that is fixed with OSS Note 1644491 - unlimited overdelivery flag is cleared with price change

Need help on photoshop elements 13 download. Install disk will not allow entering of serial number or select product on the learn more screen.

trying to install ps element 13 from disk. will not allow entering serial number or selecting product on learn more screen..

Plagiarism, paraphrasing and downloading largeamounts of >information from external sources, will
not be tolerated and will be >dealt with severely.
You will receive no marks for work that is not yourown. Your work may >be subject to checks for
originality which can include use of an >electronic
plagiarism detection service.Hey, the OP didn't read the rest of the assignment so why should they read that part?

Overdelivery not allow eventhough overdelivery maintain in production

Similar Messages

Maybe you are looking for