Overdelivery Tolerance In PO is not working

I have created a PO of 100 Qty.
10% Overdelivery tolerance is given in PO.
At first i have done Goods Receipt Of 90 Qty.
Second time when i am going to do GR of 20 Qty( i.e. 10 qty of Open PO+ 10 % of PO i.e. 10 Qty) ,It is showing error.
But when i am doing GR of 11 qty ( i.e 10 Qty Open PO + 10 % Of open PO i.e. 1) it is not showing any error.
By functionality it should take 20 qty in GR .
What should be missing in this?
Please give ur valuable suggestions.

Hi
It wont calculate the Overdelivery tolerance on PO Open Quantity. Rather than that it will calculate the Overdelivery tolerance on Full PO Item QUantity.
Regards
Virender Singh

Similar Messages

  • Overdelivery tolerance- confirm quantity (allocation) not getting updated

    Hi All
        I have a strange problem......could this be a gap with the SAP program
    I am using over and under delivery tolerance (say 10%)  in the customer master - sales - shipping tab. Now i create a order with
    Order qty          1100
    confirmed qty   1100
    delivery qty      1200      (since we have maintained 10 % over delivery tolerance)
    Now i want to update the order to 1200 for two reasons
    1) to keep the order in sync with delivery
    2) to update the allocations (this is because we have Allocation activated and not ATP at schedule line level)
    So when i go into the order and update the line to 1200 the following happens
    Order qty             1200 
    confirmed qty      1100   (not updated)
    delivery qty         1200       
    So my confirm qty is not getting updated to 1200 and hence my allocation tables are not getting updated. The same is getting updated when we have ATP at schedule line level. Could this be a gap with SAP that i dosent update allocations in this scenario.
    The reason it dosent confirm is that it assumes that the delivery is completed and since we have tolerance maintained it assumed to be a good scenario.
    Please help.
    Vikas
    Edited by: Vikas BhumiReddy on Oct 28, 2009 5:27 PM

    I am also facing the same issue. Have you found out any solution regarding this.

  • Overdelivery tolerance mismatch in MM03 vs PO

    Hi Guys,
    We have a strange problem.
    IN MM03 Unltd Overdelivery is check marked -> which should result in PO creation with unlimited overdelivery tolerance, however that is not the case. System doesn't automatically appear unlimited (tick mark) in PO - delivery tab and have to manually select it.
    Could anyone share the reason why system is not picking this?
    If this has to happen automaticallly, is there any procedure or things which might be missing.
    Thanks,
    K

    A change in material master will only effect data created after the change.
    The data flow is from material master to info record and from info record to purchase order.
    if you have a contract, then from contract to PO.
    So if info record (or contract) are already exist when you change the material master, then the existing data will not update automatically, you have to do this yourself manually.

  • Overdelivery and underdelivery functionality not working

    Hi, I have defined 10% underdelivery and 50 % overdelivery for a PO Item created for 100 pcs ( the tolerance values are picked from material master). In fact I also defined same values in info record for respective Plant.
    Now while entering Good receipts , I entered a Qty 6 and i was expecting an ERROR message , but it doesn't and document gets posted. i even tried with 1 qty and 80 pcs but all waste.
    do I also need to do some other settings ?
    REGARDS
    SANDEEP

    Thx .... I could able to get an error message.
    Sorry , but I have another queriy now
    My order item qty is 100 , Underdelivery tolerance = 50 and Overdelivery tolerance is 50 %.
    I received 60 pcs first which system allows ( as it is > 50).-- This is perfect.
    NOW for balance 40 pcs , I did prepare a GR of 10 pcs ( which is less than 50%) , and this time I was expecting an Error messsage but system posted it also.
    SO MY QUERY IS .... will this functionality only works for the first receipt not for balance receipts. ??
    Although I have business logic explaination for both envoirements but wanted to know what is standard functionality of SAP.
    Appreciate your efforts to resolve my query.
    Regards/SANDEEP

  • Purchase Order Goods Receipt quantity tolerance setting not working.

    Team,
    We are using the IS-Oil solution, ECC 6.0 REL 605 SP LEVEL 009 .
    The issue that I have is as follows:
    Purchase Order Goods Receipt quantity tolerance setting not working, I had set up a 10% tolerance on QTY received in the GR process via the PIR and also the Purchase Value Key in the  material master and also changed the message to a warning in OMCQ for message number M0722.
    I  had performed a similar configuration and master data maintenance on a different NON IS-OIL client install and it worked fine.
    I believe it is the IS-OIL component in the Inventory update portion of the GR process that is causing the error.
    I have searched for OSS notes, however they mention that there is no solution.
    Setting the PO line item as Unlimited will not be best practice for the business and will not be used.
    Has anyone come across this issue? and how was it resolved, your help and guidance will be greatly appreciated.
    Thanks

    Hello,
    Please check the Tolerance levels in O588 
    Also you can use the BAdI OIB_QCI_ROUND_QTY: A new method, CHECK_TOLERANCE
    Best Regards,
    R.Brahmankar

  • Tolerance key BD (small difference) not working

    My client has a 2.00 tolerance for small difference and I have configured the tolerance key BD as such OMR6.  When we test the difference in FB60 or FV60, it is not working.  It is saying difference to large for clearing and the difference is 2.49?
    What could be the issue?

    no response

  • Fault Tolerance not working between CSMs

    I have two CSM modules in two differnt switches (Bridge mode) configured for high availability. After noticing one of the CSM modules was in failed mode, I reset the module. While the module reboots I get the following messages: %CSM_SLB-4-REDUNDANCY_WARN: Module 3 FT warning: LRP: no ACK from standby.. standby may be down
    %CSM_SLB-4-TOPOLOGY: Module 3 warning: IP address conflict: ARP frame from 170.41.228.10 with MAC 00:01:64:f9:
    1a:07 received on VLAN 2.
    With both online a "show mod csm 3 ft" shows both modules active.
    I can no longer access the real servers.
    When I remove the module that I reset (Primary) I can access the servers using the backup CSM.
    Whe I remove the backup CSM and insert the Primary, I cannot acces the servers once again.
    The FT vlan is VLAN 7 configured on both switches and is the only allowed VLAN on the trunk.
    The config for the Primary CSM is:redundancy
    mode sso
    main-cpu
    auto-sync running-config
    spanning-tree mode pvst
    module ContentSwitchingModule 3
    ft group 7 vlan 7
    priority 30
    preempt
    vlan 2 client
    ip address 170.41.228.20 255.255.255.192
    gateway 170.41.228.1
    vlan 8 server
    ip address 170.41.228.20 255.255.255.192
    probe CARMENWEBPROBE tcp
    interval 10
    failed 100
    probe HTTPS tcp
    interval 10
    failed 100
    port 443
    serverfarm CARMENWEBFARM
    nat server
    no nat client
    real 170.41.228.15
    inservice
    real 170.41.228.16
    inservice
    probe HTTPS
    vserver CARMENVSERVER
    virtual 170.41.228.10 tcp 0
    serverfarm CARMENWEBFARM
    persistent rebalance
    inservice
    Trunk for VLAN 7 config :
    interface GigabitEthernet4/2
    switchport
    switchport trunk encapsulation isl
    switchport trunk allowed vlan 7
    switchport mode trunk
    no ip address
    logging event link-status
    logging event spanning-tree status
    logging event trunk-status
    Has anyone had this problem?
    Thanks, Donald

    The plan is to take a working CSM from a DR site with the same config to try in place of the not working active. I did not want to risk taking the working stanby and moving it and possibly having an outage at this time since this is a production switch being heavily utilized at the moment. I wanted to verify there was not something in the config that was not configured properly.

  • Userexit/BADI change Overdelivery Tolerance Limit in Purchase Order / MIGO

    Hi,
    i woould like to implement a own logic to set the Overdelivery Tolerance Limit in the order or MIGO. IIs there any badi/exit where I can do this?
    I tried with the exit EXIT_SAPLEINR_001 but it doesn't work.
    Thx
    Cheers
    Hannes

    Hi,
    thx for the answer.
    The BADI MB_DOCUMENT_UPDATE is only used when i save the migo. I need some point earlier since otherwise the error message appears that i i can not book more pieces as in the order.
    The Exit MEQUERY1  is only used for define a own preselection in the order and MEVME001 contains the exit EXIT_SAPLEINR_001 which i implemented but does not work.
    Other suggestions?
    Thx
    Hannes

  • "Overdelivery Tolerance Limit" of 5% for all the PO

    Hello experts
    I saw that is possible to indicate the "Overdelivery Tolerance Limit" in the Material Master Data, in order to bring it to the PO automatically.
    But I am not using materials, I am working only with material groups, so how can I define the field for all the PO to be the 5%?? only by user exit, or is it possible by customizing?
    Thank you in advance
    Best regards,

    hi Maddiii,
    It is very much possible to maintain per a particular group of material groups.i.e.,
    1.) You have to create a new Z table and in that include all the material groups with their percentages,
    2.) Call the values while saving the PO through by BAdi.
    Please let me know for further details,
    Regards...
    Srini Rao

  • Create Delivery against STO  define overdelivery tolerance

    Hello,
    Can anyone please suggest if there is a way to create Delivery More Than Open STO Quantity?
    My scenario goes like this lets say I have STO with Quantity 100 KG. I am creating delivery with 60 Quantity and system is allowing me to create delivery.
    now  I have 40 KG open so system is still allowing create delivery and Its allowing me to create of any amount although I dont have any Overdelivery Tolerance set up in STO or in Material Master.
    but If I try to create delivery again its says its not able to find the STO and hence does not create delivery so my requirement is to define over delivery tolerance and allow SAP to create delivery on STO over STO Quantity.
    I am using BAPI_OUTB_DELIVERY_CREATE_STO to create delivery.
    putting my requirement as example
    STO- 100 KG
    first delivery - 40 KG - as of now sap create delivery
    second delivery - 50 kg - here as well
    third delivery - 45 Kg - here as well
    fourth delivery - 50 kg -  does not create
    I know this seems bit confusing I tried to explain Please let me know if need more details.
    Thanks
    Shail

    Thanks Jurgen,
    One of my friend suggested me to try the copy control setting against delivery and changing the Quantity is calculated positively, negatively or not at all to zero which explains
    Indicates whether, during copying, the quantity or value in the target document has a negative effect, positive effect, or no effect at all on the quantity still to be completed in the source document."
    I tried using this but still not working.
    I guess this may work if I create delivery from SO and not STO.
    for now I have requested User to Bump up the STO Quantity.
    but I want to find out which field and where the system check and determine if STO is fully delivered or does not have open quantity
    Thanks
    Shail

  • Help me on overdelivery tolerance

    Hi SD Functionals,
    I'm an abapper. My client wanted to limit her delivery quantity based on the sales order.. I am not sure how overdelivery tolerance works. Please guide me with this.
    The other abapper tried to used and configured item category TAN to limit the delivery. But there are some orders like,  20.5 kilos and it locked to 20 kilos for the delivery.  I just don't know how that happened.
    Should I use overdelivery tolerance or re-configure the TAN? If I will use the first one, is there anything that I need to configure? Or the user will just defone how much percent on the sales order and the delivery will depend on it?
    I really need your assistance. You'll be given points later.
    Thanks!

    hello again, maui.
    when you choose "B", then when somebody tries to change the delivery quantity to be more than the order quantity, the system will not allow this and will give an error message.
    as an example, your sales order has quantity 100 for a material.
    when you create the delivery and try to change the quantity to 101 or more, the system will not allow this and include an error message.
    in another scenario, again with an order of 100, you first have a partial delivery of 50.  then in the second delivery, the system will recognize that you cannot delivery more than this.  so changing the quantity in the second delivery to 51 will not be allowed.
    in this way, you don't have to even make any settings in the customer master.
    hope this really helped.
    jty

  • Transfer of under delivery/overdelivery tolerance from sales order to prord

    Hi,
    My client works on SAP+MES environment. Here when a SO is created for a FERT material, the PO is generated automatically. A program is run to transfer this produciton order to their MES system. During this process, the initial values for underdelivery/overdelivery tolerance are picked up from the material master work scheduling view. But due to some reason, if the SO is changed, the underdelivery/overdelivery tolerance gets updated in the production order with the values that are in the SO.
    In the meantime, due to the initial transfer of material master data value, their PPC department plans the material based on the same. Subsequently, due to automatic updation of the values from the SO, there is a problem of excess/lower production happening on the shop floor.
    I want to know how to find out the user exit that is transfering the data from the SO to PO and the logic written for the same. Request you to help me find out the same.
    Regards,
    Sridharan M

    Sridharan,
    I am a bit puzzled what you mean by 'working parallely".  Just about any ABAPer with whom I have worked would have answered these  questions, had I asked them.
    Functional userexits are found in Programs, and Programs may (or may not be) executed by a user.  Executable programs may or may not be accessed via transactions.
    So, let us assume you have discovered a userexit that your company has implemented, using Mangalraj's expert instructions.
    CMOD enter the project. Select components; Select Display.
    I will assume that it is a function exit.  Select the component that contains the implemented modification.  Select Display.
    Place your cursor on the FM name. Select the 'Where Used' icon.  Select programs, OK.
    All programs that use that FM will be displayed.  Select one of the programs, select display.
    Continue this process iteratively (many times there are 'includes' within 'includes'.)  Eventually the 'where used' selection criteria will probably (but not always) have a checkbox that allows you to search for Transactions.  Select this and execute.  This will indicate transactions that call the userexit.
    From the above, you can deduce the following:
    An implemented userexit may be used in one or many programs/includes.
    The userexit may be used in zero or one or many transactions.
    Again, I recommend that you consult with your ABAPer.  He should quickly be able to answer your questions.  The search becomes very simple if your company has documents that describe your installed userexits in a library.  If such a library exists, your ABAPer should know about it.  Otherwise, he will have to do a bit of digging.
    There is a nice WIKI here about userexits
    http://wiki.sdn.sap.com/wiki/display/ABAP/Waystofindauserexit
    If this info is inadequate for your needs, you could consider posting such questions on one of the ABAP forums.
    Best Regards,
    DB49

  • DVI to Video Adapter with NVIDIA 8800 GT not working

    Hi all. I have the new Mac Pro Octo (mar '08) with the NVIDIA GFORCE 8800 GT card. I cannot find anywhere what may be wrong. Only on the Apple Website for the adapter that the only Mac Pro it works with is the Mac Pro (with ATI X1900 XT). However, both tech support and Apple's Store staff said this would work, prior to buying it. Well, my computer does not recognize the TV monitor hooked up via S-Video. I've powered everything down, restarted, unplugged and replugged in both orders, and switched inputs on the TV and receiver both. Nothing.
    Any one know if this does or does not work with this computer???
    Thanks.

    Never mind. Found this out via Apples own website. Thanks APPLE TECH SUPPORT and STORE STAFF for getting me to buy a useless cable!
    Mac Pro Computers (January 2008)
    The Mac Pro computers with Quad-Core Intel Xeon 5400 Series microprocessors were introduced in January 2008. The Mac Pro’s graphics subsystem interfaces to the North Bridge via a 16-lane PCIe 2.0 bus. For information on the PCI Express graphics support and expansion, refer to PCI Developer Note.
    The following sections describe the Mac Pro’s graphics subsystem.
    Graphics Cards
    Supported graphics cards have dual-link DVI connectors, supporting 30-inch Apple Cinema HD Displays on both ports.
    For information on video memory, power, and features refer to Table 1.
    All of the supported graphics cards support dual displays in either extended desktop or video mirroring mode; for more detail, see “External Display Modes.”
    Table 1 Supported Graphics Cards
    Graphics card
    Video SDRAM
    Power usage
    ATI Radeon HD 2600 XT (standard)
    256 MB (GDDR3)
    50 W
    NVIDIA GeForce 8800GT (configure to order)
    512 MB (GDDR3)
    110 W
    NVIDIA Quadro FX 5600 (configure to order)
    1536 MB (GDDR3)
    175 W
    The GeForce 8800GT graphics card requires that a booster cable be connected from the PCI slot to the auxiliary power connector. The Quadro FX 5600 graphics card requires two booster cables be connected from the PCI slot to the auxiliary power connector. For additional information, refer to the PCI Developer Note.
    The Mac Pro supports the 20-inch Apple Cinema Display at a resolution of 1680 x 1050, the 23-inch Apple Cinema HD Display at a resolution of 1920 x 1200, and the 30-inch Apple Cinema HD Display at a resolution of 2560 x 1600. All ports support a maximum resolution of 2048 x 1536 at 32-bit with 85 Hz refresh rate. Multiple PCI Express graphics cards can support three or more displays.
    The table below lists the displays supported by port 1 and port 2.
    Table 2 Port 1 and Port 2 support
    Graphics card
    Port 1
    Port 2
    Radeon HD 2600 XT
    20”, 23”, 30” Apple displays
    20”, 23”, 30” Apple displays, DVI to Video Adapter
    GeForce 8800GT
    20”, 23”, 30” Apple displays
    20”, 23”, 30” Apple displays
    Quadro FX 5600
    20”, 23”, 30” Apple displays
    20”, 23”, 30” Apple displays
    For information on video ports, see “Video Monitor Ports.” For information on PCI Express expansion slots, refer to PCI Developer Note.
    Video Monitor Ports
    The Mac Pro has a DVI connector for an external video monitor. For a description of the DVI connector, refer to Figure 4 and Table 30.
    The graphics data sent to the digital monitor use transition minimized differential signaling (TMDS). TMDS uses an encoding algorithm to convert bytes of graphics data into characters that are transition-minimized to reduce electromagnetic interference (EMI) with copper cables and DC balanced for transmission over fiber optic cables. The TMDS algorithm also provides robust clock recovery for greater skew tolerance with longer cables or low-cost short cables.
    Note: The Mac Pro computer includes a DVI to VGA Adapter.
    DVI to Video Adapter
    The Radeon HD 2600 XT graphics card supports an optional DVI to S-video/composite adapter that provides S-video and composite output to a PAL or NTSC video monitor or VCR. When a display is connected by way of the video adapter, the computer detects the type of adapter and enables the composite and S-video outputs. The settings for the resolutions and standards (NTSC or PAL) are then selectable in the Display pane in System Preferences.
    Note: The DVI to Video Adapter does not come packaged with the Mac Pro computer and must be purchased separately.
    The video output connector is a 7-pin S-video connector. Figure 5 shows the arrangement of the pins and Table 31 shows the pin assignments on the composite out and S-video connector.
    The Mac Pro computer provides video output at picture sizes and frame rates compatible with the NTSC and PAL standards; the picture sizes are listed in Table 32. Those picture sizes produce under-scanned displays on standard monitors.

  • Issue with spamassassin, now mail not working

    Hi ! I installed spamtrainer almost two months ago. Been feeding the [email protected] for several weeks now , 700 emails each day at least .
    There was very little improvement if none at all. Tried to add "@local_domains_maps = (1)" to amavisd.conf last night thinking it might be the problem , though no virtual domain exist. This was one of the issue on the default Amavisd config. The other one is adding the symbolic link which I already done.
    Computer froze while adding the parameter "@local_domains_maps = (1)", so I manually turn off the Power Mac, then mail stopped altogether. The mails are filing up but the clients couldn't send or receive since this incidence .
    FF is the maincf. and amavis.conf
    All help are greatly appreciated.
    mail:/Users/sysadmin root# postconf -n
    alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
    always_bcc =
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debug_peer_level = 2
    enable_server_options = yes
    html_directory = no
    inet_interfaces = all
    local_recipient_maps = proxy:unix:passwd.byname $alias_maps
    luser_relay =
    mail_owner = postfix
    mailbox_size_limit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 31457280
    mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
    mydomain = cpplaw.com
    mydomain_fallback = localhost
    myhostname = mail.cpplaw.com
    mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    owner_request_special = no
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost =
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpd_client_restrictions = permit_mynetworks permit
    smtpd_tls_key_file =
    unknown_local_recipient_reject_code = 550
    virtual_mailbox_domains =
    virtual_transport = virtual
    mail:/Users/sysadmin root# postconf -n
    alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
    always_bcc =
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debug_peer_level = 2
    enable_server_options = yes
    html_directory = no
    inet_interfaces = all
    local_recipient_maps = proxy:unix:passwd.byname $alias_maps
    luser_relay =
    mail_owner = postfix
    mailbox_size_limit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 31457280
    mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
    mydomain = cpplaw.com
    mydomain_fallback = localhost
    myhostname = mail.cpplaw.com
    mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    owner_request_special = no
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost =
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpd_client_restrictions = permit_mynetworks permit
    smtpd_tls_key_file =
    unknown_local_recipient_reject_code = 550
    virtual_mailbox_domains =
    virtual_transport = virtual
    mail:/Users/sysadmin root#
    _______________________Amavisd.cof_________________________
    use strict;
    # Configuration file for amavisd-new
    # This software is licensed under the GNU General Public License (GPL).
    # See comments at the start of amavisd-new for the whole license text.
    #Sections:
    # Section I - Essential daemon and MTA settings
    # Section II - MTA specific
    # Section III - Logging
    # Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
    # Section V - Per-recipient and per-sender handling, whitelisting, etc.
    # Section VI - Resource limits
    # Section VII - External programs, virus scanners, SpamAssassin
    # Section VIII - Debugging
    #GENERAL NOTES:
    # This file is a normal Perl code, interpreted by Perl itself.
    # - make sure this file (or directory where it resides) is NOT WRITABLE
    # by mere mortals, otherwise it represents a severe security risk!
    # - for values which are interpreted as booleans, it is recommended
    # to use 1 for true, and 0 or undef or '' for false.
    # THIS IS DIFFERENT FROM OLDER AMAVIS VERSIONS where "no" also meant false,
    # now it means true, like any nonempty string does!
    # - Perl syntax applies. Most notably: strings in "" may include variables
    # (which start with $ or @); to include characters @ and $ in double
    # quoted strings, precede them by a backslash; in single-quoted strings
    # the $ and @ lose their special meaning, so it is usually easier to use
    # single quoted strings. Still, in both cases a backslash need to be doubled
    # - variables with names starting with a '@' are lists, the values assigned
    # to them should be lists as well, e.g. ('one@foo', $mydomain, "three");
    # note the comma-separation and parenthesis. If strings in the list
    # do not contain spaces nor variables, a Perl operator qw() may be used
    # as a shorthand to split its argument on whitespace and produce a list
    # of strings, e.g. qw( one@foo example.com three ); Note that the argument
    # to qw is quoted implicitly and no variable interpretation is done within
    # (no '$' variable evaluations). The #-initiated comments can not be used
    # within the string. In other words, $ and # lose their special meaning
    # withing a qw argument, just like within '...' strings.
    # - all e-mail addresses in this file and as used internally by the daemon
    # are in their raw (rfc2821-unquoted and nonbracketed) form, i.e.
    # Bob "Funny" [email protected], not: "Bob \"Funny\" Dude"@example.com
    # and not <"@example.com>; also: '' and not ''.
    # Section I - Essential daemon and MTA settings
    # $MYHOME serves as a quick default for some other configuration settings.
    # More refined control is available with each individual setting further down.
    # $MYHOME is not used directly by the program. No trailing slash!
    #$MYHOME = '/var/lib/amavis'; # (default is '/var/amavis')
    # : $mydomain serves as a quick default for some other configuration settings.
    # : More refined control is available with each individual setting further down.
    # : $mydomain is never used directly by the program.
    $mydomain = 'cpplaw.com'; aol.com'; # (no useful default)
    # Set the user and group to which the daemon will change if started as root
    # (otherwise just keep the UID unchanged, and these settings have no effect):
    $daemon_user = 'clamav'; # (no default; customary: vscan or amavis)
    $daemon_group = 'clamav'; # (no default; customary: vscan or amavis)
    # Runtime working directory (cwd), and a place where
    # temporary directories for unpacking mail are created.
    # (no trailing slash, may be a scratch file system)
    $TEMPBASE = $MYHOME; # (must be set if other config vars use is)
    #$TEMPBASE = "$MYHOME/tmp"; # prefer to keep home dir /var/amavis clean?
    # $helpers_home sets environment variable HOME, and is passed as option
    # 'home_dir_for_helpers' to Mail::SpamAssassin::new. It should be a directory
    # on a normal persistent file system, not a scratch or temporary file system
    #$helpers_home = $MYHOME; # (defaults to $MYHOME)
    #$daemon_chroot_dir = $MYHOME; # (default is undef, meaning: do not chroot)
    #$pid_file = "$MYHOME/amavisd.pid"; # (default is "$MYHOME/amavisd.pid")
    #$lock_file = "$MYHOME/amavisd.lock"; # (default is "$MYHOME/amavisd.lock")
    # set environment variables if you want (no defaults):
    $ENV{TMPDIR} = $TEMPBASE; # wise, but usually not necessary
    # MTA SETTINGS, UNCOMMENT AS APPROPRIATE,
    # both $forward_method and $notify_method default to 'smtp:127.0.0.1:10025'
    # POSTFIX, or SENDMAIL in dual-MTA setup, or EXIM V4
    # (set host and port number as required; host can be specified
    # as IP address or DNS name (A or CNAME, but MX is ignored)
    #$forward_method = 'smtp:127.0.0.1:10025'; # where to forward checked mail
    #$notify_method = $forward_method; # where to submit notifications
    # NOTE: The defaults (above) are good for Postfix or dual-sendmail. You MUST
    # uncomment the approprate settings below if using other setups!
    # SENDMAIL MILTER, using amavis-milter.c helper program:
    #$forward_method = undef; # no explicit forwarding, sendmail does it by itself
    # milter; option -odd is needed to avoid deadlocks
    #$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -odd -f ${sender} -- ${recipient}';
    # just a thought: can we use use -Am instead of -odd ?
    # SENDMAIL (old non-milter setup, as relay):
    #$forward_method = 'pipe:flags=q argv=/usr/sbin/sendmail -C/etc/sendmail.orig.cf -i -f ${sender} -- ${recipient}';
    #$notify_method = $forward_method;
    # SENDMAIL (old non-milter setup, amavis.c calls local delivery agent):
    #$forward_method = undef; # no explicit forwarding, amavis.c will call LDA
    #$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -f ${sender} -- ${recipient}';
    # EXIM v3 (not recommended with v4 or later, which can use SMTP setup instead):
    #$forward_method = 'pipe:flags=q argv=/usr/sbin/exim -oMr scanned-ok -i -f ${sender} -- ${recipient}';
    #$notify_method = $forward_method;
    # prefer to collect mail for forwarding as BSMTP files?
    #$forward_method = "bsmtp:$MYHOME/out-%i-%n.bsmtp";
    #$notify_method = $forward_method;
    # Net::Server pre-forking settings
    # You may want $max_servers to match the width of your MTA pipe
    # feeding amavisd, e.g. with Postfix the 'Max procs' field in the
    # master.cf file, like the '2' in the: smtp-amavis unix - - n - 2 smtp
    $max_servers = 2; # number of pre-forked children (default 2)
    $max_requests = 10; # retire a child after that many accepts (default 10)
    $child_timeout=5*60; # abort child if it does not complete each task in n sec
    # (default: 8*60 seconds)
    # Check also the settings of @av_scanners at the end if you want to use
    # virus scanners. If not, you may want to delete the whole long assignment
    # to the variable @av_scanners, which will also remove the virus checking
    # code (e.g. if you only want to do spam scanning).
    # Here is a QUICK WAY to completely DISABLE some sections of code
    # that WE DO NOT WANT (it won't even be compiled-in).
    # For more refined controls leave the following two lines commented out,
    # and see further down what these two lookup lists really mean.
    #@bypass_virus_checks_acl = qw( . ); # uncomment to DISABLE anti-virus code
    #@bypass_spam_checks_acl = qw( . ); # uncomment to DISABLE anti-spam code
    # Any setting can be changed with a new assignment, so make sure
    # you do not unintentionally override these settings further down!
    # Lookup list of local domains (see README.lookups for syntax details)
    # NOTE:
    # For backwards compatibility the variable names @local_domains (old) and
    # @local_domains_acl (new) are synonyms. For consistency with other lookups
    # the name @local_domains_acl is now preferred. It also makes it more
    # obviously distinct from the new %local_domains hash lookup table.
    # local_domains* lookup tables are used in deciding whether a recipient
    # is local or not, or in other words, if the message is outgoing or not.
    # This affects inserting spam-related headers for local recipients,
    # limiting recipient virus notifications (if enabled) to local recipients,
    # in deciding if address extension may be appended, and in SQL lookups
    # for non-fqdn addresses. Set it up correctly if you need features
    # that rely on this setting (or just leave empty otherwise).
    # With Postfix (2.0) a quick reminder on what local domains normally are:
    # a union of domains spacified in: $mydestination, $virtual_alias_domains,
    # $virtual_mailbox_domains, and $relay_domains.
    @local_domains_acl = ( ".$mydomain" ); # $mydomain and its subdomains
    # @local_domains_acl = qw(); # default is empty, no recipient treated as local
    # @local_domains_acl = qw( .example.com );
    # @local_domains_acl = qw( .example.com !host.sub.example.net .sub.example.net );
    # @local_domains_acl = ( ".$mydomain", '.example.com', 'sub.example.net' );
    # or alternatively(A), using a Perl hash lookup table, which may be assigned
    # directly, or read from a file, one domain per line; comments and empty lines
    # are ignored, a dot before a domain name implies its subdomains:
    #read_hash(\%local_domains, '/var/amavis/local_domains');
    #or alternatively(B), using a list of regular expressions:
    # $local_domains_re = new_RE( qr'[@.]example\.com$'i );
    # see README.lookups for syntax and semantics
    # Section II - MTA specific (defaults should be ok)
    # if $relayhost_is_client is true, IP address in $notify_method and
    # $forward_method is dynamically overridden with SMTP client peer address
    # if available, which makes possible for several hosts to share one daemon
    #$relayhost_is_client = 1; # (defaults to false)
    #$insert_received_line = 1; # behave like MTA: insert 'Received:' header
    # (does not apply to sendmail/milter)
    # (default is true)
    # AMAVIS-CLIENT PROTOCOL INPUT SETTINGS (e.g. with sendmail milter)
    # (used with amavis helper clients like amavis-milter.c and amavis.c,
    # NOT needed for Postfix and Exim)
    $unix_socketname = "$MYHOME/amavisd.sock"; # amavis helper protocol socket
    #$unix_socketname = undef; # disable listening on a unix socket
    # (default is undef, i.e. disabled)
    # (usual setting is $MYHOME/amavisd.sock)
    # Do we receive quoted or raw addresses from the helper program?
    # (does not apply to SMTP; defaults to true)
    #$gets_addr_in_quoted_form = 1; # "Bob \"Funny\" Dude"@example.com
    #$gets_addr_in_quoted_form = 0; # Bob "Funny" [email protected]
    # SMTP SERVER (INPUT) PROTOCOL SETTINGS (e.g. with Postfix, Exim v4, ...)
    # (used when MTA is configured to pass mail to amavisd via SMTP or LMTP)
    $inet_socket_port = 10024; # accept SMTP on this local TCP port
    # (default is undef, i.e. disabled)
    # multiple ports may be provided: $inet_socket_port = [10024, 10026, 10028];
    # SMTP SERVER (INPUT) access control
    # - do not allow free access to the amavisd SMTP port !!!
    # when MTA is at the same host, use the following (one or the other or both):
    #$inet_socket_bind = '127.0.0.1'; # limit socket bind to loopback interface
    # (default is '127.0.0.1')
    @inet_acl = qw( 127.0.0.1 ); # allow SMTP access only from localhost IP
    # (default is qw( 127.0.0.1 ) )
    # when MTA (one or more) is on a different host, use the following:
    #@inet_acl = qw(127/8 10.1.0.1 10.1.0.2); # adjust the list as appropriate
    #$inet_socket_bind = undef; # bind to all IP interfaces
    # Example1:
    # @inet_acl = qw( 127/8 10/8 172.16/12 192.168/16 );
    # permit only SMTP access from loopback and rfc1918 private address space
    # Example2:
    # @inet_acl = qw( !192.168.1.12 172.16.3.3 !172.16.3/255.255.255.0
    # 127.0.0.1 10/8 172.16/12 192.168/16 );
    # matches loopback and rfc1918 private address space except host 192.168.1.12
    # and net 172.16.3/24 (but host 172.16.3.3 within 172.16.3/24 still matches)
    # Example3:
    # @inet_acl = qw( 127/8
    # !172.16.3.0 !172.16.3.127 172.16.3.0/25
    # !172.16.3.128 !172.16.3.255 172.16.3.128/25 );
    # matches loopback and both halves of the 172.16.3/24 C-class,
    # split into two subnets, except all four broadcast addresses
    # for these subnets
    # See README.lookups for details on specifying access control lists.
    # Section III - Logging
    # true (e.g. 1) => syslog; false (e.g. 0) => logging to file
    $DO_SYSLOG = 0; # (defaults to false)
    #$SYSLOG_LEVEL = 'user.info'; # (defaults to 'mail.info')
    # Log file (if not using syslog)
    $LOGFILE = "/var/log/amavis.log"; # (defaults to empty, no log)
    #NOTE: levels are not strictly observed and are somewhat arbitrary
    # 0: startup/exit/failure messages, viruses detected
    # 1: args passed from client, some more interesting messages
    # 2: virus scanner output, timing
    # 3: server, client
    # 4: decompose parts
    # 5: more debug details
    $log_level = 4; # (defaults to 0)
    # Customizeable template for the most interesting log file entry (e.g. with
    # $log_level=0) (take care to properly quote Perl special characters like '\')
    # For a list of available macros see README.customize .
    # only log infected messages (useful with log level 0):
    # $log_templ = '[? %#V |[? %#F ||banned filename ([%F|,])]|infected ([%V|,])]#
    # [? %#V |[? %#F ||, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]#
    # |, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]';
    # log both infected and noninfected messages (default):
    $log_templ = '[? %#V |[? %#F |[?%#D|Not-Delivered|Passed]|BANNED name/type (%F)]|INFECTED (%V)], #
    <%o> -> [<%R>|,][? %i ||, quarantine %i], Message-ID: %m, Hits: %c';
    # Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
    # Select notifications text encoding when Unicode-aware Perl is converting
    # text from internal character representation to external encoding (charset
    # in MIME terminology)
    # to be used in RFC 2047-encoded header field bodies, e.g. in Subject:
    #$hdr_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
    # to be used in notification body text: its encoding and Content-type.charset
    #$bdy_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
    # Default template texts for notifications may be overruled by directly
    # assigning new text to template variables, or by reading template text
    # from files. A second argument may be specified in a call to read_text(),
    # specifying character encoding layer to be used when reading from the
    # external file, e.g. 'utf8', 'iso-8859-1', or often just $bdy_encoding.
    # Text will be converted to internal character representation by Perl 5.8.0
    # or later; second argument is ignored otherwise. See PerlIO::encoding,
    # Encode::PerlIO and perluniintro man pages.
    # $notify_sender_templ = read_text('/var/amavis/notify_sender.txt');
    # $notify_virus_sender_templ= read_text('/var/amavis/notify_virus_sender.txt');
    # $notify_virus_admin_templ = read_text('/var/amavis/notify_virus_admin.txt');
    # $notify_virus_recips_templ= read_text('/var/amavis/notify_virus_recips.txt');
    # $notify_spam_sender_templ = read_text('/var/amavis/notify_spam_sender.txt');
    # $notify_spam_admin_templ = read_text('/var/amavis/notify_spam_admin.txt');
    # If notification template files are collectively available in some directory,
    # use read_l10n_templates which calls read_text for each known template.
    # read_l10n_templates('/etc/amavis/en_US');
    # Here is an overall picture (sequence of events) of how pieces fit together
    # (only virus controls are shown, spam controls work the same way):
    # bypass_virus_checks set for all recipients? ==> PASS
    # no viruses? ==> PASS
    # log virus if $log_templ is nonempty
    # quarantine if $virus_quarantine_to is nonempty
    # notify admin if $virus_admin (lookup) nonempty
    # notify recips if $warnvirusrecip and (recipient is local or $warn_offsite)
    # add address extensions for local recipients (when enabled)
    # send (non-)delivery notifications
    # to sender if DSN needed (BOUNCE) or ($warnvirussender and D_PASS)
    # virus_lovers or final_destiny==D_PASS ==> PASS
    # DISCARD (2xx) or REJECT (5xx) (depending on final_*_destiny)
    # Equivalent flow diagram applies for spam checks.
    # If a virus is detected, spam checking is skipped entirely.
    # The following symbolic constants can be used in *destiny settings:
    # D_PASS mail will pass to recipients, regardless of bad contents;
    # D_DISCARD mail will not be delivered to its recipients, sender will NOT be
    # notified. Effectively we lose mail (but will be quarantined
    # unless disabled). Not a decent thing to do for a mailer.
    # D_BOUNCE mail will not be delivered to its recipients, a non-delivery
    # notification (bounce) will be sent to the sender by amavisd-new;
    # Exception: bounce (DSN) will not be sent if a virus name matches
    # $viruses_that_fake_sender_re, or to messages from mailing lists
    # (Precedence: bulk|list|junk);
    # D_REJECT mail will not be delivered to its recipients, sender should
    # preferably get a reject, e.g. SMTP permanent reject response
    # (e.g. with milter), or non-delivery notification from MTA
    # (e.g. Postfix). If this is not possible (e.g. different recipients
    # have different tolerances to bad mail contents and not using LMTP)
    # amavisd-new sends a bounce by itself (same as D_BOUNCE).
    # Notes:
    # D_REJECT and D_BOUNCE are similar, the difference is in who is responsible
    # for informing the sender about non-delivery, and how informative
    # the notification can be (amavisd-new knows more than MTA);
    # With D_REJECT, MTA may reject original SMTP, or send DSN (delivery status
    # notification, colloquially called 'bounce') - depending on MTA;
    # Best suited for sendmail milter, especially for spam.
    # With D_BOUNCE, amavisd-new (not MTA) sends DSN (can better explain the
    # reason for mail non-delivery, but unable to reject the original
    # SMTP session). Best suited to reporting viruses, and for Postfix
    # and other dual-MTA setups, which can't reject original client SMTP
    # session, as the mail has already been enqueued.
    $final_virus_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
    $final_banned_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
    $final_spam_destiny = D_PASS; # (defaults to D_REJECT)
    $final_bad_header_destiny = D_PASS; # (defaults to D_PASS), D_BOUNCE suggested
    # Alternatives to consider for spam:
    # - use D_PASS if clients will do filtering based on inserted mail headers;
    # - use D_DISCARD, if kill_level is set safely high;
    # - use D_BOUNCE instead of D_REJECT if not using milter;
    # There are no sensible alternatives to D_BOUNCE for viruses, but consider:
    # - use D_PASS (or virus_lovers) and $warnvirussender=1 to deliver viruses;
    # - use D_REJECT instead of D_BOUNCE if using milter and under heavy
    # virus storm;
    # Don't bother to set both D_DISCARD and $warn*sender=1, it will get mapped
    # to D_BOUNCE.
    # The separation of *_destiny values into D_BOUNCE, D_REJECT, D_DISCARD
    # and D_PASS made settings $warnvirussender and $warnspamsender only still
    # useful with D_PASS.
    # The following $warn*sender settings are ONLY used when mail is
    # actually passed to recipients ($final_*_destiny=D_PASS, or *_lovers*).
    # Bounces or rejects produce non-delivery status notification anyway.
    # Notify virus sender?
    #$warnvirussender = 1; # (defaults to false (undef))
    # Notify spam sender?
    #$warnspamsender = 1; # (defaults to false (undef))
    # Notify sender of banned files?
    #$warnbannedsender = 1; # (defaults to false (undef))
    # Notify sender of syntactically invalid header containing non-ASCII characters?
    #$warnbadhsender = 1; # (defaults to false (undef))
    # Notify virus (or banned files) RECIPIENT?
    # (not very useful, but some policies demand it)
    #$warnvirusrecip = 1; # (defaults to false (undef))
    #$warnbannedrecip = 1; # (defaults to false (undef))
    # Notify also non-local virus/banned recipients if $warn*recip is true?
    # (including those not matching local_domains*)
    #$warn_offsite = 1; # (defaults to false (undef), i.e. only notify locals)
    # Treat envelope sender address as unreliable and don't send sender
    # notification / bounces if name(s) of detected virus(es) match the list.
    # Note that virus names are supplied by external virus scanner(s) and are
    # not standardized, so virus names may need to be adjusted.
    # See README.lookups for syntax.
    $viruses_that_fake_sender_re = new_RE(
    qr'nimda|hybris|klez|bugbear|yaha|braid|sobig|fizzer|palyh|peido|holar'i );
    # where to send ADMIN VIRUS NOTIFICATIONS (should be a fully qualified address)
    # - the administrator address may be a simple fixed e-mail address (a scalar),
    # or may depend on the SENDER address (e.g. its domain), in which case
    # a ref to a hash table can be specified (specify lower-cased keys,
    # dot is a catchall, see README.lookups).
    # Empty or undef lookup disables virus admin notifications.
    $virus_admin = '[email protected]';
    # $virus_admin = undef; # do not send virus admin notifications (default)
    # $virus_admin = {'not.example.com' => '', '.' => '[email protected]'};
    # $virus_admin = '[email protected]';
    # equivalent to $virus_admin, but for spam admin notifications:
    #$spam_admin = '[email protected]';# $spam_admin = undef; # do not send spam admin notifications (default)
    # $spam_admin = {'not.example.com' => '', '.' => '[email protected]'};
    #advanced example, using a hash lookup table:
    # - $virus_admin = {
    # '[email protected]' => '[email protected]',
    # '.sub1.example.com' => '[email protected]',
    # '.sub2.example.com' => '', # don't send admin notifications
    # 'a.sub3.example.com' => '[email protected]',
    # '.sub3.example.com' => '[email protected]',
    # '.example.com' => '[email protected]', # catchall for our virus senders
    # '.' => '[email protected]', # catchall for the rest
    # whom notification reports are sent from (ENVELOPE SENDER);
    # may be a null reverse path, or a fully qualified address:
    # (admin and recip sender addresses default to $mailfrom
    # for compatibility, which in turn defaults to undef (empty) )
    # If using strings in double quotes, don't forget to quote @, i.e. \@
    $mailfrom_notify_admin = "virusalert\@$mydomain";
    $mailfrom_notify_recip = "virusalert\@$mydomain";
    $mailfrom_notify_spamadmin = "spam.police\@$mydomain";
    # 'From' HEADER FIELD for sender and admin notifications.
    # This should be a replyable address, see rfc1894. Not to be confused
    # with $mailfrom_notify_sender, which is the envelope address and
    # should be empty (null reverse path) according to rfc2821.
    # $hdrfrom_notify_sender = "amavisd-new <postmaster\@$mydomain>";
    # $hdrfrom_notify_sender = 'amavisd-new <[email protected]>';
    # (defaults to: "amavisd-new <postmaster\@$myhostname>")
    # $hdrfrom_notify_admin = $mailfrom_notify_admin;
    # (defaults to: $mailfrom_notify_admin)
    # $hdrfrom_notify_spamadmin = $mailfrom_notify_spamadmin;
    # (defaults to: $mailfrom_notify_spamadmin)
    # whom quarantined messages appear to be sent from (envelope sender)
    $mailfrom_to_quarantine = undef; # original sender if undef, or set explicitly
    # (default is undef)
    # Location to put infected mail into: (applies to 'local:' quarantine method)
    # empty for not quarantining, may be a file (mailbox),
    # or a directory (no trailing slash)
    # (the default value is undef, meaning no quarantine)
    $QUARANTINEDIR = '/var/virusmails';
    #$virus_quarantine_method = "local:virus-%i-%n"; # default
    #$spam_quarantine_method = "local:spam-%b-%i-%n"; # default
    #use the new 'bsmtp:' method as an alternative to the default 'local:'
    #$virus_quarantine_method = "bsmtp:$QUARANTINEDIR/virus-%i-%n.bsmtp";
    #$spam_quarantine_method = "bsmtp:$QUARANTINEDIR/spam-%b-%i-%n.bsmtp";
    # When using the 'local:' quarantine method (default), the following applies:
    # A finer control of quarantining is available through variable
    # $virus_quarantine_to/$spam_quarantine_to. It may be a simple scalar string,
    # or a ref to a hash lookup table, or a regexp lookup table object,
    # which makes possible to set up per-recipient quarantine addresses.
    # The value of scalar $virus_quarantine_to/$spam_quarantine_to (or a
    # per-recipient lookup result from the hash table %$virus_quarantine_to)
    # is/are interpreted as follows:
    # VARIANT 1:
    # empty or undef disables quarantine;
    # VARIANT 2:
    # a string NOT containg an '@';
    # amavisd will behave as a local delivery agent (LDA) and will quarantine
    # viruses to local files according to hash %local_delivery_aliases (pseudo
    # aliases map) - see subroutine mail_to_local_mailbox() for details.
    # Some of the predefined aliases are 'virus-quarantine' and 'spam-quarantine'.
    # Setting $virus_quarantine_to ($spam_quarantine_to) to this string will:
    # * if $QUARANTINEDIR is a directory, each quarantined virus will go
    # to a separate file in the $QUARANTINEDIR directory (traditional
    # amavis style, similar to maildir mailbox format);
    # * otherwise $QUARANTINEDIR is treated as a file name of a Unix-style
    # mailbox. All quarantined messages will be appended to this file.
    # Amavisd child process must obtain an exclusive lock on the file during
    # delivery, so this may be less efficient than using individual files
    # or forwarding to MTA, and it may not work across NFS or other non-local
    # file systems (but may be handy for pickup of quarantined files via IMAP
    # for example);
    # VARIANT 3:
    # any email address (must contain '@').
    # The e-mail messages to be quarantined will be handed to MTA
    # for delivery to the specified address. If a recipient address local to MTA
    # is desired, you may leave the domain part empty, e.g. 'infected@', but the
    # '@' character must nevertheless be included to distinguish it from variant 2.
    # This method enables more refined delivery control made available by MTA
    # (e.g. its aliases file, other local delivery agents, dealing with
    # privileges and file locking when delivering to user's mailbox, nonlocal
    # delivery and forwarding, fan-out lists). Make sure the mail-to-be-quarantined
    # will not be handed back to amavisd for checking, as this will cause a loop
    # (hopefully broken at some stage)! If this can be assured, notifications
    # will benefit too from not being unecessarily virus-scanned.
    # By default this is safe to do with Postfix and Exim v4 and dual-sendmail
    # setup, but probably not safe with sendmail milter interface without
    # precaution.
    # (the default value is undef, meaning no quarantine)
    #$virus_quarantine_to = '[email protected]'; # traditional local quarantine
    #$virus_quarantine_to = 'infected@'; # forward to MTA for delivery
    #$virus_quarantine_to = "virus-quarantine\@$mydomain"; # similar
    #$virus_quarantine_to = '[email protected]'; # similar
    #$virus_quarantine_to = undef; # no quarantine
    #$virus_quarantine_to = new_RE( # per-recip multiple quarantines
    # [qr'^user@example\.com$'i => 'infected@'],
    # [qr'^(.*)@example\.com$'i => 'virus-${1}@example.com'],
    # [qr'^(.*)(@[^@])?$'i => 'virus-${1}${2}'],
    # [qr/.*/ => 'virus-quarantine'] );
    # similar for spam
    # (the default value is undef, meaning no quarantine)
    #$spam_quarantine_to = '[email protected]';
    #$spam_quarantine_to = "spam-quarantine\@$mydomain";
    #$spam_quarantine_to = new_RE( # per-recip multiple quarantines
    # [qr'^(.*)@example\.com$'i => 'spam-${1}@example.com'],
    # [qr/.*/ => 'spam-quarantine'] );
    # In addition to per-recip quarantine, a by-sender lookup is possible. It is
    # similar to $spam_quarantine_to, but the lookup key is the sender address:
    #$spam_quarantine_bysender_to = undef; # dflt: no by-sender spam quarantine
    # Add X-Virus-Scanned header field to mail?
    $X_HEADER_TAG = 'X-Virus-Scanned'; # (default: undef)
    # Leave empty to add no header field # (default: undef)
    $X_HEADER_LINE = "by amavisd-new at $mydomain";
    $remove_existing_x_scanned_headers = 0; # leave existing X-Virus-Scanned alone
    #$remove_existing_x_scanned_headers= 1; # remove existing headers
    # (defaults to false)
    $remove_existing_spam_headers = 0; # leave existing X-Spam* headers alone
    #$remove_existing_spam_headers = 1; # remove existing spam headers if
    # spam scanning is enabled (default)
    # set $bypass_decode_parts to true if you only do spam scanning, or if you
    # have a good virus scanner that can deal with compression and recursively
    # unpacking archives by itself, and save amavisd the trouble.
    # Disabling decoding also causes banned_files checking to only see
    # MIME names and MIME content types, not the content classification types
    # as provided by the file(1) utility.
    # It is a double-edged sword, make sure you know what you are doing!
    #$bypass_decode_parts = 1; # (defaults to false)
    # don't trust this file type or corresponding unpacker for this file type,
    # keep both the original and the unpacked file
    # (lookup key is what file(1) utility returned):
    $keep_decoded_original_re = new_RE(
    qr'^(ASCII|text|uuencoded|xxencoded|binhex)'i,
    # Checking for banned MIME types and names. If any mail part matches,
    # the whole mail is rejected, much like the way viruses are handled.
    # A list in object $banned_filename_re can be defined to provide a list
    # of Perl regular expressions to be matched against each part's:
    # * Content-Type value (both declared and effective mime-type),
    # including the possible security risk content types
    # message/partial and message/external-body, as specified by rfc2046;
    # * declared (recommended) file names as specified by MIME subfields
    # Content-Disposition.filename and Content-Type.name, both in their
    # raw (encoded) form and in rfc2047-decoded form if applicable;
    # * file content type as guessed by 'file(1)' utility, both the raw result
    # from file(1), as well as short type name, classified into names such as
    # .asc, .txt, .html, .doc, .jpg, .pdf, .zip, .exe, ..., which is always
    # beginning with a dot - see subroutine determine_file_types().
    # This step is done only if $bypass_decode_parts is not true.
    # * leave $banned_filename_re undefined to disable these checks
    # (giving an empty list to new_RE() will also always return false)
    $banned_filename_re = new_RE(
    qr'\.[a-zA-Z][a-zA-Z0-9]{0,3}\.(vbs|pif|scr|bat|com|exe|dll)$'i, # double extension
    # qr'.\.(exe|vbs|pif|scr|bat|com)$'i, # banned extension - basic
    # qr'.\.(ade|adp|bas|bat|chm|cmd|com|cpl|crt|exe|hlp|hta|inf|ins|isp|js|
    # jse|lnk|mdb|mde|msc|msi|msp|mst|pcd|pif|reg|scr|sct|shs|shb|vb|
    # vbe|vbs|wsc|wsf|wsh)$'ix, # banned extension - long
    # qr'^\.(exe|zip|lha|tnef)$'i, # banned file(1) types
    # qr'^application/x-msdownload$'i, # banned MIME types
    # qr'^message/partial$'i, qr'^message/external-body$'i, # rfc2046
    # See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
    # and http://www.cknow.com/vtutor/vtextensions.htm
    # A little trick: a pattern qr'\.exe$' matches both a short type name '.exe',
    # as well as any file name which happens to end with .exe. If only matching
    # a file name is desired, but not the short name, a pattern qr'.\.exe$'i
    # or similar may be used, which requires that at least one character preceeds
    # the '.exe', and so it will never match short file types, which always start
    # with a dot.
    # Section V - Per-recipient and per-sender handling, whitelisting, etc.
    # %virus_lovers, @virus_lovers_acl and $virus_lovers_re lookup tables:
    # (these should be considered policy options, they do not disable checks,
    # see bypas*checks for that!)
    # Exclude certain RECIPIENTS from virus filtering by adding their lower-cased
    # envelope e-mail address (or domain only) to the hash %virus_lovers, or to
    # the access list @virus_lovers_acl - see README.lookups and examples.
    # Make sure the appropriate form (e.g. external/internal) of address
    # is used in case of virtual domains, or when mapping external to internal
    # addresses, etc. - this is MTA-specific.
    # Notifications would still be generated however (see the overall
    # picture above), and infected mail (if passed) gets additional header:
    # X-AMaViS-Alert: INFECTED, message contains virus: ...
    # (header not inserted with milter interface!)
    # NOTE (milter interface only): in case of multiple recipients,
    # it is only possible to drop or accept the message in its entirety - for all
    # recipients. If all of them are virus lovers, we'll accept mail, but if
    # at least one recipient is not a virus lover, we'll discard the message.
    # %bypass_virus_checks, @bypass_virus_checks_acl and $bypass_virus_checks_re
    # lookup tables:
    # (this is mainly a time-saving option, unlike virus_lovers* !)
    # Similar in concept to %virus_lovers, a hash %bypass_virus_checks,
    # access list @bypass_virus_checks_acl and regexp list $bypass_virus_checks_re
    # are used to skip entirely the decoding, unpacking and virus checking,
    # but only if ALL recipients match the lookup.
    # %bypass_virus_checks/@bypass_virus_checks_acl/$bypass_virus_checks_re
    # do NOT GUARANTEE the message will NOT be checked for viruses - this may
    # still happen when there is more than one recipient for a message, and
    # not all of them match these lookup tables. To guarantee virus delivery,
    # a recipient must also match %virus_lovers/@virus_lovers_acl lookups
    # (but see milter limitations above),
    # NOTE: it would not be clever to base virus checks on SENDER address,
    # since there are no guarantees that it is genuine. Many viruses
    # and spam messages fake sender address. To achieve selective filtering
    # based on the source of the mail (e.g. IP address, MTA port number, ...),
    # use mechanisms provided by MTA if available.
    # Similar to lookup tables controlling virus checking, there exist
    # spam scanning, banned names/types, and headers_checks control counterparts:
    # %spam_lovers, @spam_lovers_acl, $spam_lovers_re
    # %banned_files_lovers, @banned_files_lovers_acl, $banned_files_lovers_re
    # %bad_header_lovers, @bad_header_lovers_acl, $bad_header_lovers_re
    # and:
    # %bypass_spam_checks/@bypass_spam_checks_acl/$bypass_spam_checks_re
    # %bypass_banned_checks/@bypass_banned_checks_acl/$bypass_banned_checks_re
    # %bypass_header_checks/@bypass_header_checks_acl/$bypass_header_checks_re
    # See README.lookups for details about the syntax.
    # The following example disables spam checking altogether,
    # since it matches any recipient e-mail address (any address
    # is a subdomain of the top-level root DNS domain):
    # @bypass_spam_checks_acl = qw( . );
    # @bypass_header_checks_acl = qw( [email protected] );
    # @bad_header_lovers_acl = qw( [email protected] );
    # See README.lookups for further detail, and examples below.
    # $virus_lovers{lc("postmaster\@$mydomain")} = 1;
    # $virus_lovers{lc('[email protected]')} = 1;
    # $virus_lovers{lc('[email protected]')} = 1;
    # $virus_lovers{lc('some.user@')} = 1; # this recipient, regardless of domain
    # $virus_lovers{lc('[email protected]')} = 0; # never, even if domain matches
    # $virus_lovers{lc('example.com')} = 1; # this domain, but not its subdomains
    # $virus_lovers{lc('.example.com')}= 1; # this domain, including its subdomains
    #or:
    # @virus_lovers_acl = qw( [email protected] !lab.xxx.com .xxx.com yyy.org );
    # $bypass_virus_checks{lc('[email protected]')} = 1;
    # @bypass_virus_checks_acl = qw( some.ddd !butnot.example.com .example.com );
    # @virus_lovers_acl = qw( [email protected] );
    # $virus_lovers_re = new_RE( qr'(helpdesk|postmaster)@example\.com$'i );
    # $spam_lovers{lc("postmaster\@$mydomain")} = 1;
    # $spam_lovers{lc('[email protected]')} = 1;
    # $spam_lovers{lc('[email protected]')} = 1;
    # @spam_lovers_acl = qw( !.example.com );
    # $spam_lovers_re = new_RE( qr'^user@example\.com$'i );
    # don't run spam check for these RECIPIENT domains:
    # @bypass_spam_checks_acl = qw( d1.com .d2.com a.d3.com );
    # or the other way around (bypass check for all BUT these):
    # @bypass_spam_checks_acl = qw( !d1.com !.d2.com !a.d3.com . );
    # a practical application: don't check outgoing mail for spam:
    # @bypass_spam_checks_acl = ( "!.$mydomain", "." );
    # (a downside of which is that such mail will not count as ham in SA bayes db)
    # Where to find SQL server(s) and database to support SQL lookups?
    # A list of triples: (dsn,user,passw). (dsn = data source name)
    # Specify more than one for multiple (backup) SQL servers.
    # See 'man DBI', 'man DBD::mysql', 'DBD::Pg', ... for details.
    # @lookup_sql_dsn =
    # ( ['DBI:mysql:mail:host1', 'some-username1', 'some-password1'],
    # ['DBI:mysql:mail:host2', 'some-username2', 'some-password2'] );
    # ('mail' in the example is the database name, choose what you like)
    # With PostgreSQL the dsn (first element of the triple) may look like:
    # 'DBI:Pg:host=host1;dbname=mail'
    # The SQL select clause to fetch per-recipient policy settings.
    # The %k will be replaced by a comma-separated list of query addresses
    # (e.g. full address, domain only, catchall). Use ORDER, if there
    # is a chance that multiple records will match - the first match wins.
    # If field names are not unique (e.g. 'id'), the later field overwrites the
    # earlier in a hash returned by lookup, which is why we use '*,users.id'.
    # No need to uncomment the following assignment if the default is ok.
    # $sql_select_policy = 'SELECT *,users.id FROM users,policy'.
    # ' WHERE (users.policy_id=policy.id) AND (users.email IN (%k))'.
    # ' ORDER BY users.priority DESC';
    # The SQL select clause to check sender in per-recipient whitelist/blacklist
    # The first SELECT argument '?' will be users.id from recipient SQL lookup,
    # the %k will be sender addresses (e.g. full address, domain only, catchall).
    # The default value is:
    # $sql_select_white_black_list = 'SELECT wb FROM wblist,mailaddr'.
    # ' WHERE (rid=?) AND (sid=mailaddr.id) AND (mailaddr.email IN (%k))'.
    # ' ORDER BY mailaddr.priority DESC';
    # To disable SQL white/black list, set to undef (otherwise comment-out
    # the following statement, leaving it at the default value):
    $sql_select_white_black_list = undef; # undef disables SQL white/blacklisting
    # If you decide to pass viruses (or spam) to certain recipients using the
    # above lookup tables or using $final_virus_destiny=1, you can set
    # the variable $addr_extension_virus ($addr_extension_spam) to some
    # string, and the recipient address will have this string appended
    # as an address extension to the local-part of the address. This extension
    # can be used by final local delivery agent to place such mail in different
    # folders. Leave these two variables undefined or empty strings to prevent
    # appending address extensions. Setting has no effect on recipient which will
    # not be receiving viruses/spam. Recipients who do not match lookup tables
    # local_domains* are not affected.
    # LDAs usually default to stripping away address extension if no special
    # handling is specified, so having this option enabled normally does no harm,
    # provided the $recipients_delimiter matches the setting on the final
    # MTA's LDA.
    # $addr_extension_virus = 'virus'; # (default is undef, same as empty)
    # $addr_extension_spam = 'spam'; # (default is undef, same as empty)
    # $addr_extension_banned = 'banned'; # (default is undef, same as empty)
    # Delimiter between local part of the recipient address and address extension
    # (which can optionally be added, see variables $addr_extension_virus and
    # $addr_extension_spam). E.g. recipient address <[email protected]> gets changed
    # to <[email protected]>.
    # Delimiter should match equivalent (final) MTA delimiter setting.
    # (e.g. for Postfix add 'recipient_delimiter = +' to main.cf)
    # Setting it to an empty string or to undef disables this feature
    # regardless of $addr_extension_virus and $addr_extension_spam settings.
    $recipient_delimiter = '+'; # (default is '+')
    # true: replace extension; false: append extension
    # $replace_existing_extension = 1; # (default is false)
    # Affects matching of localpart of e-mail addresses (left of '@')
    # in lookups: true = case sensitive, false = case insensitive
    $localpart_is_case_sensitive = 0; # (default is false)
    # ENVELOPE SENDER WHITELISTING / BLACKLISTING - GLOBAL (RECIPIENT-INDEPENDENT)
    # WHITELISTING: use ENVELOPE SENDER lookups to ENSURE DELIVERY from whitelisted
    # senders even if the message is recognized as spam. Effectively, for the
    # specified senders, message RECIPIENTS temporarily become 'spam_lovers', with
    # further processing being the same as otherwise specified for spam lovers.
    # It does not turn off inserting spam-related headers, if they are enabled.
    # BLACKLISTING: messages from specified SENDERS are DECLARED SPAM.
    # Effectively, for messages from blacklisted senders, spam level
    # is artificially pushed high, and the normal spam processing applies,
    # resulting in 'X-Spam-Flag: YES', high 'X-Spam-Level' bar and other usual
    # reactions to spam, including possible rejection. If the message nevertheless
    # still passes (e.g. for spam loving recipients), it is tagged as BLACKLISTED
    # in the 'X-Spam-Status' header field, but the reported spam value and
    # set of tests in this report header field (if available from SpamAssassin,
    # which may have not been called) is not adjusted.
    # A sender may be both white- and blacklisted at the same time,
    # settings are independent. For example, being both white- and blacklisted,
    # message is delivered to recipients, but is tagged as spam.
    # If ALL recipients of the message either white- or blacklist the sender,
    # spam scanning (calling the SpamAssassin) is bypassed, saving on time.
    # The following variables (lookup tables) are available, with the semantics
    # and syntax as specified in README.lookups:
    # %whitelist_sender, @whitelist_sender_acl, $whitelist_sender_re
    # %blacklist_sender, @blacklist_sender_acl, $blacklist_sender_re
    # SOME EXAMPLES:
    #ACL:
    # @whitelist_sender_acl = qw( .example.com );
    # @whitelist_sender_acl = ( ".$mydomain" ); # $mydomain and its subdomains
    # NOTE: This is not a reliable way of turning off spam checks for
    # locally-originating mail, as sender address can easily be faked.
    # To reliably avoid spam-scanning outgoing mail,
    # use @bypass_spam_checks_acl .
    #RE:
    # $whitelist_sender_re = new_RE(
    # qr'^postmaster@.*\bexample\.com$'i,
    # qr'^owner-[^@]*@'i, qr'-request@'i,
    # qr'\.example\.com$'i );
    $blacklist_sender_re = new_RE(
    qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou|greatcasino)@'i,
    qr'^(investments|lose_weight_today|market.alert|money2you|MyGreenCard)@'i,
    qr'^(new\.tld\.registry|opt-out|opt-in|optin|saveonlsmoking2002k)@'i,
    qr'^(specialoffer|specialoffers|stockalert|stopsnoring|wantsome)@'i,
    qr'^(workathome|yesitsfree|your_friend|greatoffers)@'i,
    qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i,
    #HASH lookup variant:
    # NOTE: Perl operator qw splits its argument string by whitespace
    # and produces a list. This means that addresses can not contain
    # whitespace, and there is no provision for comments within the string.
    # You can use the normal Perl list syntax if you have special requirements,
    # e.g. map {...} ('one user@bla', '.second.com'), or use read_hash to read
    # addresses from a file.
    # a hash lookup table can be read from a file,
    # one address per line, comments and empty lines are permitted:
    # read_hash(\%whitelist_sender, '/var/amavis/whitelist_sender');
    # ... or set directly:
    # $whitelist_sender{''} = 1; # don't spam-check MTA bounces
    map { $whitelist_sender{lc($_)}=1 } (qw(
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    returns.groups.yahoo.com
    # ENVELOPE SENDER WHITELISTING / BLACKLISTING - PER-RECIPIENT
    # The same semantics as for global white/blacklisting applies, but this
    # time each recipient (or its domain, or subdomain, ...) can be given
    # an individual lookup table for matching senders. The per-recipient lookups
    # override the global lookups, which serve as a fallback default.
    # Specify a two-level lookup table: the key for the outer table is recipient,
    # and the result should be an inner lookup table (hash or ACL or RE),
    # where the key used will be the sender.
    #$per_recip_blacklist_sender_lookup_tables = {
    # '[email protected]'=>new_RE(qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i),
    # '[email protected]'=>[qw( [email protected],org .d2.example,org )],
    #$per_recip_whitelist_sender_lookup_tables = {
    # '[email protected]' => [qw( [email protected] .other.example.org )],
    # '.my1.example.com' => [qw( !foe.other.example,org .other.example,org )],
    # '.my2.example.com' => read_hash('/var/amavis/my2-wl.dat'),
    # 'abuse@' => { 'postmaster@'=>1,
    # '[email protected]'=>1, '[email protected]'=>1 },
    # Section VI - Resource limits
    # Sanity limit to the number of allowed recipients per SMTP transaction
    # $smtpd_recipient_limit = 1000; # (default is 1000)
    # Resource limitations to protect against mail bombs (e.g. 42.zip)
    # Maximum recursion level for extraction/decoding (0 or undef disables limit)
    $MAXLEVELS = 14; # (default is undef, no limit)
    # Maximum number of extracted files (0 or undef disables the limit)
    $MAXFILES = 1500; # (default is undef, no limit)
    # For the cumulative total of all decoded mail parts we set max storage size
    # to defend against mail bombs. Even though parts may be deleted (replaced
    # by decoded text) during decoding, the size they occupied is _not_ returned
    # to the quota pool.
    # Parameters to storage quota formula for unpacking/decoding/decompressing
    # Formula:
    # quota = max($MIN_EXPANSION_QUOTA,
    # $mail_size*$MIN_EXPANSION_FACTOR,
    # min($MAX_EXPANSION_QUOTA, $mail_size*$MAX_EXPANSION_FACTOR))
    # In plain words (later condition overrules previous ones):
    # allow MAX_EXPANSION_FACTOR times initial mail size,
    # but not more than MAX_EXPANSION_QUOTA,
    # but not less than MIN_EXPANSION_FACTOR times initial mail size,
    # but never less than MIN_EXPANSION_QUOTA
    $MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
    $MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
    $MIN_EXPANSION_FACTOR = 5; # times original mail size (must be specified)
    $MAX_EXPANSION_FACTOR = 500; # times original mail size (must be specified)
    # Section VII - External programs, virus scanners
    # Specify a path string, which is a colon-separated string of directories
    # (no trailing slashes!) to be assigned to the environment variable PATH
    # and to serve for locating external programs below.
    # NOTE: if $daemon_chroot_dir is nonempty, the directories will be
    # relative to the chroot directory specified;
    $path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';
    # Specify one string or a search list of strings (first match wins).
    # The string (or: each string in a list) may be an absolute path,
    # or just a program name, to be located via $path;
    # Empty string or undef (=default) disables the use of that external program.
    # Optionally command arguments may be specified - only the first substring
    # up to the whitespace is used for file searching.
    $file = 'file'; # file(1) utility; use 3.41 or later to avoid vulnerability
    $gzip = 'gzip';
    $bzip2 = 'bzip2';
    $lzop = 'lzop';
    $uncompress = ['uncompress', 'gzip -d', 'zcat'];
    $unfreeze = ['unfreeze', 'freeze -d', 'melt', 'fcat'];
    $arc = ['nomarch', 'arc'];
    $unarj = ['arj', 'unarj']; # both can extract, same options
    $unrar = ['rar', 'unrar']; # both can extract, same options
    $zoo = 'zoo';
    $lha = 'lha';
    $cpio = 'cpio';
    # SpamAssassin settings
    # $sa_local_tests_only is passed to Mail::SpamAssassin::new as a value
    # of the option local_tests_only. See Mail::SpamAssassin man page.
    # If set to 1, no tests that require internet access will be performed.
    $sa_local_tests_only = 1; # (default: false)
    #$sa_auto_whitelist = 1; # turn on AWL (default: false)
    $sa_mail_body_size_limit = 64*1024; # don't waste time on SA if mail is larger
    # (less than 1% of spam is > 64k)
    # default: undef, no limitations
    # default values, can be overridden by more specific lookups, e.g. SQL
    $sa_tag_level_deflt = -999; # add spam info headers if at, or above that level
    $sa_tag2_level_deflt = 3.0; # add 'spam detected' headers at that level
    $sa_kill_level_deflt = 22.0;
    #$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
    # at or above that level: bounce/reject/drop,
    # quarantine, and adding mail address extension
    # The $sa_tag_level_deflt, $sa_tag2_level_deflt and $sa_kill_level_deflt
    # may also be hashrefs to hash lookup tables, to make static per-recipient
    # settings possible without having to resort to SQL or LDAP lookups.
    # a quick reference:
    # tag_level controls adding the X-Spam-Status and X-Spam-Level headers,
    # tag2_level controls adding 'X-Spam-Flag: YES', and editing Subject,
    # kill_level controls 'evasive actions' (reject, quarantine, extensions);
    # it only makes sense to maintain the relationship:
    # tag_level <= tag2_level <= kill_level
    # string to prepend to Subject header field when message exceeds tag2 level
    $sa_spam_subject_tag = '*** JUNK MAIL ***'; # (defaults to undef, disables)
    # (only seen when spam is not to be rejected
    # and recipient is in local_domains*)
    $sa_spam_modifies_subj = 1; # may be a ref to a lookup table, default is true
    # Example: modify Subject for all local recipients except [email protected]
    #$sa_spam_modifies_subj = [qw( [email protected] . )];
    # @av_scanners is a list of n-tuples, where fields semantics is:
    # 1. av scanner plain name, to be used in log and reports;
    # 2. scanner program name; this string will be submitted to subroutine
    # find_external_programs(), which will try to find the full program
    # path name; if program is not found, this scanner is disabled.
    # Besides a simple string (full program path name or just the basename
    # to be looked for in PATH), this may be an array ref of alternative
    # program names or full paths - the first match in the list will be used;
    # As a special case for more complex scanners, this field may be
    # a subroutine reference, and the whole n-tuple is passed to it as args.
    # 3. command arguments to be given to the scanner program;
    # a substring {} will be replaced by the directory name to be scanned,
    # i.e. "$tempdir/parts"
    # 4. an array ref of av scanner exit status values, or a regexp (to be
    # matched against scanner output), indicating NO VIRUSES found;
    # 5. an array ref of av scanner exit status values, or a regexp (to be
    # matched against scanner output), indicating VIRUSES WERE FOUND;
    # Note: the virus match prevails over a 'not found' match, so it is safe
    # even if 4. matches for viruses too;
    # 6. a regexp (to be matched against scanner output), returning a list
    # of virus names found.
    # 7. and 8.: (optional) subroutines to be executed before and after scanner
    # (e.g. to set environment or current directory);
    # see examples for these at KasperskyLab AVP and Sophos sweep.
    # NOTES:
    # - NOT DEFINING @av_scanners (e.g. setting it to empty list, or deleting the
    # whole assignment) TURNS OFF LOADING AND COMPILING OF THE ANTIVIRUS CODE
    # (which can be handy if all you want to do is spam scanning);
    # - the order matters: although _all_ available entries from the list are
    # always tried regardless of their verdict, scanners are run in the order
    # specified: the report from the first one detecting a virus will be used
    # (providing virus names and scanner output); REARRANGE THE ORDER TO WILL;
    # - it doesn't hurt to keep an unused command line scanner entry in the list
    # if the program can not be found; the path search is only performed once
    # during the program startup;
    # CORROLARY: to disable a scanner that _does_ exist on your system,
    # comment out its entry or use undef or '' as its program name/path
    # (second parameter). An example where this is almost a must: disable
    # Sophos 'sweep' if you have its daemonized version Sophie or SAVI-Perl
    # (same for Trophie/vscan, and clamd/clamscan), or if another unrelated
    # program happens to have a name matching one of the entries ('sweep'
    # again comes to mind);
    # - it DOES HURT to keep unwanted entries which use INTERNAL SUBROUTINES
    # for interfacing (where the second parameter starts with \&).
    # Keeping such entry and not having a corresponding virus scanner daemon
    # causes an unnecessary connection attempt (which eventually times out,
    # but it wastes precious time). For this reason the daemonized entries
    # are commented in the distribution - just remove the '#' where needed.
    @av_scanners = (
    # ### http://www.vanja.com/tools/sophie/
    # ['Sophie',
    # \&ask_daemon, ["{}/\n", '/var/run/sophie'],
    # qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
    # qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
    # ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
    # ['Sophos SAVI', \&sophos_savi ],
    # ### http://clamav.elektrapro.com/
    # ['Clam Antivirus-clamd',
    # \&ask_daemon, ["CONTSCAN {}\n", '/var/amavis/clamd'],
    # qr/\bOK$/, qr/\bFOUND$/,
    # qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
    # # NOTE: run clamd under the same user as amavisd,
    # # match the socket name in clamav.conf to the socket name in this entry
    # ### http://www.openantivirus.org/
    # ['OpenAntiVirus ScannerDaemon (OAV)',
    # \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
    # qr/^OK/, qr/^FOUND: /, qr/^FOUND: (.+)/ ],
    # ### http://www.vanja.com/tools/trophie/
    # ['Trophie',
    # \&ask_daemon, ["{}/\n", '/var/run/trophie'],
    # qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
    # qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
    # ### http://www.f-prot.com/
    # ['FRISK F-Prot Daemon',
    # \&ask_daemon,
    # ["GET {}/*?-dumb%20-archive HTTP/1.0\r\n\r\n",
    # ['127.0.0.1:10200','127.0.0.1:10201','127.0.0.1:10202',
    # '127.0.0.1:10203','127.0.0.1:10204'] ],
    # qr/(?i)<summary[^>]*>clean<\/summary>/,
    # qr/(?i)<summary[^>]*>infected<\/summary>/,
    # qr/(?i)<name>(.+)<\/name>/ ],
    ['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp','kavscanner'],
    "-* -P -B -Y -O- {}", [0,3,8], [2,4], # any use for -A -K ?
    qr/infected: (.+)/,
    sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
    sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
    ['KasperskyLab AVPDaemonClient',
    [ '/opt/AVP/kavdaemon', 'kavdaemon',
    '/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
    '/opt/AVP/AvpTeamDream', 'AvpTeamDream',
    '/opt/AVP/avpdc', 'avpdc' ],
    '{}', [0,8], [3,4,5,6], qr/infected: ([^\r\n]+)/ ],
    # change the startup-script in /etc/init.d/kavd to:
    # DPARMS="-I0 -Y -* /var/amavis"
    # adjusting /var/amavis above to match your $TEMPBASE.
    # NOTE: cd /opt/AVP/DaemonClients; configure; cd Sample; make
    # cp AvpDaemonClient /opt/AVP/
    ### http://www.hbedv.com/ or http://www.centralcommand.com/
    ['H+BEDV AntiVir or CentralCommand Vexira Antivirus',
    ['antivir','vexira'],
    '--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/,
    qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
    (?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/ ],
    # NOTE: remove the -z if you only have a demo version
    ### http://www.commandsoftware.com/
    ['Command AntiVirus for Linux', 'csav',
    '-all -archive -packed {}', [50], [51,52,53],
    qr/Infection: (.+)/ ],
    ### http://www.symantec.com/
    ['Symantec CarrierScan via Symantec CommandLineScanner',
    ['cscmdline','savsecls'],
    '-a scan -i 1 -v -s 127.0.0.1:7777 {}',
    qr/Files Infected: 0/, qr/^Infected: /,
    qr/Info:\s+(.+)/ ],
    ### http://drweb.imshop.de/
    ['DrWeb Antivirus for Linux/FreeBSD/Solaris', 'drweb',
    '-al -ar -fm -go -ha -ml -ot -sd -up {}',
    [0], [1], sub {('no-name')} ],
    ### http://www.f-secure.com/products/anti-virus/
    ['F-Secure Antivirus', 'fsav',
    '--dumb --archive {}', [0], [3,8],
    qr/(?:infection|Infected): (.+)/ ],
    ['CAI InoculateIT', 'inocucmd',
    '-sec -nex {}', [0], [100],
    qr/was infected by virus (.+)/ ],
    ['MkS_Vir for Linux (beta)', ['mks32','mks'],
    '-s {}/*', [0], [1,2],
    qr/--[ \t]*(.+)/ ],
    ['MkS_Vir daemon',
    'mksscan', '-s -q {}', [0], [1..7],
    qr/^... (\S+)/ ],
    ### http://www.nod32.com/
    ['ESET Software NOD32', 'nod32',
    '-all -subdir+ {}', [0], [1,2],
    qr/^.+? - (.+?)\s*(?:backdoor|joke|trojan|virus|worm)/ ],
    ### http://www.nod32.com/
    ['ESET Software NOD32 - Client/Server Version', 'nod32cli',
    '-a -r -d recurse --heur standard {}', [0], [10,11],
    qr/^\S+\s+infected:\s+(.+)/ ],
    ### http://www.norman.com/products_nvc.shtml
    ['Norman Virus Control v5 / Linux', 'nvccmd',
    '-c -l:0 -s -u {}', [0], [1],
    qr/(?i).* virus in .* -> \'(.+)\'/ ],
    ### http://www.pandasoftware.com/
    ['Panda Antivirus for Linux', ['pavcl','pavc'],
    '-aut -aex -heu -cmp -nor -nso -eng {}',
    qr/Number of files infected\.*: 0(?!\d)/,
    qr/Number of files infected\.*: 0*[1-9]/,
    qr/Found virus :\s*(\S+)/ ],
    # Check your RAV license terms before fiddling with the following two lines!
    # ['GeCAD RAV AntiVirus 8', 'ravav',
    # '--all --archive --mail {}', [1], [2,3,4,

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • Suddenly won't boot, start up commands not working... am I out of luck?

    Funny, this is my first mac being a hardcore and longtime PC user as my "test" mac... everything works perfectly... of course until 12 days after my warranty is up...
    This morning on waking up my mac to turn on some music in iTunes, i click on the iTunes window to bring it into focus. It suddenly closes and dissapears, on returning to the shortcut bar (the tray at the bottom for programs, i don't know what mac users call it) and click on iTunes ot relaunch it after its crash/dissapearance, the task tray then decides to suddenly dissapear/crash (don't know which, it's like a crash but best described as a vanishing act as it doesn't lag or churn before dying, just vanishes).
    Possibly related to this issue, not long ago my iChat stopped working, whenever i launched it, it would stay open for a couple seconds and automatically closed. I could sit there all day clicking it, it would open, 2 seconds later, close. I gave up on that. I gave up on that a week ago.
    Shortly after my iTunes dissapeared/crash and then after the program tray also dissapearing. my mac mini reboots. Except it's stuck on the screen with the mac apple in the middle of the screen with the moving (yes it's moving) pinwheel on the bottom center of the screen. I let it sit there for a long while... 15 minutes pass nothing happens.
    I try rebooting... same thing happens.
    I'm go on my PC (Which i'm now typing from) and start searching for solutions. apple support pages suggest I try safe mode with shift.
    SAFE MODE: Won't work. I tried pushing both shift buttons on my keyboard at different times (before the start up tone, immediately after the beggining of the start up tone, and after the start up tone finishes) all that happens is, I get the same pinwheel/apple screen that is "loading" (according to the pinwheel) forever.
    I went to forums, read up on other different commands like holding down "X" or option command P+R.... X does the same as the not-working safe mode... option command P+R continually reboots the computer.
    And in the end I'm still at square one. thouroughly frustrated. wishing my mac mini was a PC (as i've never had a PC problem I can't fix) Ironic experience... PCs, break often, easily fixed, no support needed.... Macs: rarely break, when they do, support needed, but support from apple expires 12 days ago, not easily fixed... and now I think i'm screwed out of the 700$+ i payed for this POS and I've lost my whole iTunes library, all the CDs i've loaded onto it, and all the music and TV shows i've purchased from the apple music store. Good game, apple takes a bunch of money, refuses to support my product which is now dead (had a similar situation with an iPod I had bought for my girlfriend).
    My only hope is... I know mac users have a happy helpful community and always band together to help fellow mac users, something the PC world doesn't as-cohsively have. So...
    Help me Obi-Wan Kenobi... you guys are my last and only hope.
    Thanks in advance.
    -John

    Hi, John. Welcome to the Discussions.
    1. You wrote: "I get the same pinwheel/apple screen that is "loading" (according to the pinwheel) forever"The "pinwheel" is known as a "spinning gear progress indicator."
    This, combined with the other issues you've reported, sounds like problems with the hard drive. I suggest you begin troubleshooting using the Procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
    2. You wrote: "...the shortcut bar (the tray at the bottom for programs, i don't know what mac users call it)"It's called the Dock. See "Mac OS X: About the Dock."
    3. You wrote: "...this is my first mac..."My "Learning About Mac OS X" FAQ has a number of resources that you will find helpful including books, online training, and more.
    4. You wrote: "...Macs: rarely break, when they do, support needed, but support from apple expires 12 days ago, not easily fixed..."You should have bought the AppleCare Protection Plan (ACPP) before your warranty expired. The ACPP provides a two-year extension on the warranty and three years of telephone support.
    PS: Word to the Wise: watch the language. I appreciate your frustration, but don't let it into your posts. These forums are "family friendly" and a good way to get banned from them is to rant, use profanity (including profane abbreviations), etc. What passes for "acceptable behavior" on most PC/Windows forums is not tolerated here.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Maybe you are looking for

  • CS4 : unable to print / stops printer / halts print job on Fuji Xerox c2255

    Morning, This discussion posting may or may not have some relevance to my previous posting, CS4 : memory leak errors (?) in Os X console log I am working on a clients workstation and they are having a few problems. Specific hardware and software deta

  • Acrobat 9 - Save PDF as Optimized leading to blurry print jobs

    Hi, I am looking for some insight into PDF's with optimized savings. I had a print job recently where some pages came out blurry and some pages did not. The previous job I did had no issues but the files files took a long time to send. SO this time I

  • Downgrade to ios5

    I desperately need to downgrade to iOS5 for a number of reasons. 1. Paid for apps are no longer working. Apple took their cut of the money I paid so they should help me use them by letting me go back to ios5. 2. Gmail no longer works in the mail app.

  • Preparing for Photos - exporting RAW files

    I'm planning to switch over to Photos when it is available. The problem is that my current Aperture file is quite big - 1.64TB and I think the online Photos option only allows for 1TB. What I'll probably do is take out all of the RAW files and archiv

  • Clicking sound and MBP does not boot

    Two months ago, I upgraded to a MacBook Pro, which today suddenly failed to start. When it happened, I had woken it from sleep and started up EyeTV through its USB-powered antenna. The programme started up normally then the screen froze and the spinn