Overdelivery tolerance mismatch in MM03 vs PO

Hi Guys,
We have a strange problem.
IN MM03 Unltd Overdelivery is check marked -> which should result in PO creation with unlimited overdelivery tolerance, however that is not the case. System doesn't automatically appear unlimited (tick mark) in PO - delivery tab and have to manually select it.
Could anyone share the reason why system is not picking this?
If this has to happen automaticallly, is there any procedure or things which might be missing.
Thanks,
K

A change in material master will only effect data created after the change.
The data flow is from material master to info record and from info record to purchase order.
if you have a contract, then from contract to PO.
So if info record (or contract) are already exist when you change the material master, then the existing data will not update automatically, you have to do this yourself manually.

Similar Messages

Purchase Order (Overdelivery tolerance limit)

Hi All,
Can we fix default value of Overdelivery tolerance limit and Underdelivery tolerance limit at time of creating the PO ? if Yes then how ?
Thanks in advance..
Sanjay

Sanjay,
As per my understanding there is no standard settings to default the value of Overdelivery tolerance limit and Underdelivery tolerance limit at time of creating the PO.
Regards,
Manish

To restrict overdelivery tolerance up to a certain limit while creating PO

Dear friends,
How to restrict overdelivery tolerance up to a certain limit (e.g. 5 or 10%) in delivery tab while PO creation?
Any idea?
Regds
Amitava

Hi
Hope you aware the delivery tolerance is coming from Purchasing value key you maintained in the Material master.
So you can restrict the over delivery percentage at purchasing value key itself.
Or please try the screen lay out to only display the field after maintaining the correct % in PVK.
Or Try some user exit with the help of ABAPer.
Hope it helps.
Thanks/Karthik

Overdelivery Tolerance

Hi,
Just a simple query...In PO the overdelivery tolerances acts on total quantity or quantity yet to be received?
For example lets say a PO has 100 tones of material with an overdelivery tolerance og 5%. Against the PO already 30 tonnes has been received.
Now here the overdelivery tolerances will act on 100 tonnes or remaining 70 tonnes?
Regards,
Indranil

Fine...but my query is if some quantity is already received then where the over delivery tolerance will act?on the total PO quantity or whether on the open quantity?Actually i don't have the system right now and so unable to test the same.If anyone can test and confirm me the same will be quite helpful.
Regards,
Indranil

GR for overdelivery tolerance PO

Hi,
I have issue with a user(Only one user having this issue),who is able to receive the goods for Fully delivered PO.User can receive up to overdelivery tolerance given in the PO.How to restrict this.
Expecting some valuable inputs.
With regards
Ram.

My issue is this,
Purchase Order qty=30 EA
Over Dely Tolerance=20%
Received through MIGO=30 EA
After this also system allowing to receive goods for 20% of the order qty.
Only one user having this problem.
By Standard if i receive goods for delivery completed PO,the system will throw a message No selectable items.
With regards
Ram

Overdelivery tolerance - extended classic

Hi all,
We have extended classic scenario, and would like to have overdelivery tolerance. I've created a tolerance group in SRM, and assigned tol keys CF, DA and DQ.
I've also maintained a Purchasing Value Key in ECC via OMQW (SPRO --> MM --> Purchasing --> Material Master --> Entry Aids for Items Without a Material Master)
When I post the confirmation in SRM I get the appropriate error message (so if I try to post 106 for a PO with 100 qty, I get the error message, 105 is OK).
However, the IDoc goes into error in the backend, as the qty is exceeded. Error message: "PU Ordered quantity exceeded by 5 EA : <PLANTCODE>"
When I look at the PO inside SRM, in the item detail the overdelivery tolerance is 0%, and the ECC copy also has 0%. I would have expected them both to show 5% (and for this to copy-into the PO)?
If I create a new 'spot PO' directly in ECC (ME21N) with all the same detail, the 5% tolerance is coming through automatically from the OMQW setup.
Do you have any ideas how to get the overdelivery tolerance into the SRM PO, so that the copy in the backend would also show it (so IDOC will post successfully)?
Thanks in advance,
J

Hi,
I have a similar problem.
I have assigne a tolerance group in ppoma_bbp, but the purchasing group is not defaulted into the PO,
Therefore the % on the PO is 0, which leads to an error message when i hit check on the confirmations in SRM, even if I am within the tolerance limit.
Also when i try to search for the tolerance group on the PO it won't display.
If I update the tolerances the manually ont he PO the i am able to create an overdelivery.
We are on the same release ECC 6 EhP 4 and SRM 7.0 SP 9, extended classic.
Could you please update how you solved the issue?
Cheers
Ulrike

Userexit/BADI change Overdelivery Tolerance Limit in Purchase Order / MIGO

Hi,
i woould like to implement a own logic to set the Overdelivery Tolerance Limit in the order or MIGO. IIs there any badi/exit where I can do this?
I tried with the exit EXIT_SAPLEINR_001 but it doesn't work.
Thx
Cheers
Hannes

Hi,
thx for the answer.
The BADI MB_DOCUMENT_UPDATE is only used when i save the migo. I need some point earlier since otherwise the error message appears that i i can not book more pieces as in the order.
The Exit MEQUERY1 is only used for define a own preselection in the order and MEVME001 contains the exit EXIT_SAPLEINR_001 which i implemented but does not work.
Other suggestions?
Thx
Hannes

Overdelivery tolerance Screen selection for Purchasing order

Hi all,
Currently we have a scenario over here, where we need to change the over delivery tolerance for purchasing order.
Overview:
We have received plastic packing screw ( PO 3480000011 , PO qty 98,000 pcs ) in 3 GR's
1st GR. 21,000 pcs
2nd GR. 29,000 pcs
3rd GR. 50,000 pcs
total = 100,000 pcs
===================
For 1st & 2nd del. we have input into SAP, but for the last del. we can't input because qty over 2,000 pcs than PO
Because of this, we have reversed the 1st and 2nd GR, but we still cant enable the over/under delivery tolerance field selection.
Other than that i have make the changes thru the
OLME -> purchasing order -> Define screen layout at document level -> select Me22 and click on details ->GR/IR Control -> overdelivery tolerance with "X" at Reqd. entry.
But this doesnt seem to work.
have anyone encounter this issue kindly provide me some hint on this.
Point will be rewarded for useful answer.
Thank you.
Kah Fei

Hi,
I think Under/Over delivery tolerance are a part of 'purchasing value key' of the purchasing view in the material master record.
Try changing that for your material so that you get a overdelivery tolerance of more than 2% in the material master record.
Otherwise in your PO , under the delivery tab in the item details mark the chkbox 'unlimited' overdelivery and check out....
Revert back for further help...
Regards,
Prithviraj
Edited by: Prithviraj Talekar on Jan 19, 2009 10:49 AM

How to default the Overdelivery Tolerance in POs

Hi,
Is there a way I can default the Overdelivery Tolerance for all Purchase Orders?
I know it is possible through PIR, but I need it to work for services and one-off POs (no material masters).
Thanks.

Hi,
You can create Inforecord without material master. In this case you can create with material group and vendor combination.
Regards,
Prabu

Overdelivery Tolerance In PO is not working

I have created a PO of 100 Qty.
10% Overdelivery tolerance is given in PO.
At first i have done Goods Receipt Of 90 Qty.
Second time when i am going to do GR of 20 Qty( i.e. 10 qty of Open PO+ 10 % of PO i.e. 10 Qty) ,It is showing error.
But when i am doing GR of 11 qty ( i.e 10 Qty Open PO + 10 % Of open PO i.e. 1) it is not showing any error.
By functionality it should take 20 qty in GR .
What should be missing in this?
Please give ur valuable suggestions.

Hi
It wont calculate the Overdelivery tolerance on PO Open Quantity. Rather than that it will calculate the Overdelivery tolerance on Full PO Item QUantity.
Regards
Virender Singh

"Overdelivery Tolerance Limit" of 5% for all the PO

Hello experts
I saw that is possible to indicate the "Overdelivery Tolerance Limit" in the Material Master Data, in order to bring it to the PO automatically.
But I am not using materials, I am working only with material groups, so how can I define the field for all the PO to be the 5%?? only by user exit, or is it possible by customizing?
Thank you in advance
Best regards,

hi Maddiii,
It is very much possible to maintain per a particular group of material groups.i.e.,
1.) You have to create a new Z table and in that include all the material groups with their percentages,
2.) Call the values while saving the PO through by BAdi.
Please let me know for further details,
Regards...
Srini Rao

Overdelivery Tolerance Limit

Hello,
Is Overdelivery Tolerance Limit works for service order.
I have to make service entry more than ordered service.
Please help.
Regards,
Vishal Garg

hi
when u create PO in item details
in service TAB within the line you will find field for Overfulfillment tolerance and also a tick for Unlimited overfulfillment so you can use any one of it
regards
kunal

Create Delivery against STO define overdelivery tolerance

Hello,
Can anyone please suggest if there is a way to create Delivery More Than Open STO Quantity?
My scenario goes like this lets say I have STO with Quantity 100 KG. I am creating delivery with 60 Quantity and system is allowing me to create delivery.
now I have 40 KG open so system is still allowing create delivery and Its allowing me to create of any amount although I dont have any Overdelivery Tolerance set up in STO or in Material Master.
but If I try to create delivery again its says its not able to find the STO and hence does not create delivery so my requirement is to define over delivery tolerance and allow SAP to create delivery on STO over STO Quantity.
I am using BAPI_OUTB_DELIVERY_CREATE_STO to create delivery.
putting my requirement as example
STO- 100 KG
first delivery - 40 KG - as of now sap create delivery
second delivery - 50 kg - here as well
third delivery - 45 Kg - here as well
fourth delivery - 50 kg - does not create
I know this seems bit confusing I tried to explain Please let me know if need more details.
Thanks
Shail

Thanks Jurgen,
One of my friend suggested me to try the copy control setting against delivery and changing the Quantity is calculated positively, negatively or not at all to zero which explains
Indicates whether, during copying, the quantity or value in the target document has a negative effect, positive effect, or no effect at all on the quantity still to be completed in the source document."
I tried using this but still not working.
I guess this may work if I create delivery from SO and not STO.
for now I have requested User to Bump up the STO Quantity.
but I want to find out which field and where the system check and determine if STO is fully delivered or does not have open quantity
Thanks
Shail

Overdelivery tolerance with partial GRs

Hi all,
We have the following scenario in a purchase order with the delivery tolerance indicator:
Qty in th PO 1000, overdelivery tolerance 10%, so we can accept until 1100.
We can do 2 partial GRs like
Firts GR for 500
Second GR for 600
But if we do 3 GRs like this:
First GR for 500
Second GR for 500
Third GR for 100
the last one fails, since there is no open qty in the PO, Is there any standard way to allow this? We know we can change the qty in the PO, but we do not want to do it.
Regards.

Assuming by fail you mean in MIGO no selectable items msg (?) then in MIGO from the menu: Settings \ default values
Select the 'propose all items' tick box, save setting (adopt).
And you're good to go.
Regards,
Nick

MIGO - Check the "Overdelivery tolerance limit"

Hi All,
I'm looking for an enhancement to check the quantity in MIGO t-code. My issue is: I want that sometimes the system does't check the "Overdelivery tolerance limit" inserted into the purchase order. Is there a way?
Many thanks,
Luca

Hello,
Check like this,
DATA: lr_ekpo LIKE ekpo,
        lv_menge TYPE uetmg,
        lv_menge1 TYPE uetmg,
        lv_menge2 TYPE uetmg,
        lv_menge3 TYPE uetmg,
        l_va_text TYPE text20.
CLEAR: lr_ekpo.
SELECT SINGLE * FROM ekpo INTO lr_ekpo WHERE ebeln = va_ebeln
                                           AND ebelp = wa_tc01-ebelp
                                           AND uebtk = space.
IF sy-subrc = 0.
    lv_menge = wa_tc01-bsmng + ( wa_tc01-bsmng * lr_ekpo-uebto / 100 ).
   lv_menge1 = wa_tc01-bsmng - ( wa_tc01-bsmng * lr_ekpo-untto / 1000 ).
    lv_menge2 = lv_menge - lv_menge1.
    lv_menge3 = lv_menge2 + wa_tc01-omeng.
ELSE.
    EXIT.
ENDIF.
IF wa_tc01-erfmg GT lv_menge3.
    lv_menge1 = wa_tc01-erfmg - wa_tc01-omeng.
    WRITE lv_menge1 UNIT wa_tc01-meins TO l_va_text NO-GAP.
    CONDENSE l_va_text.
    CONCATENATE l_va_text wa_tc01-meins INTO l_va_text
                                    SEPARATED BY space.
    MESSAGE e022(m7) WITH text-025 l_va_text.
ENDIF.
Implement the logic in the exit MB_CF001 - EXIT_SAPLMBMB_001
Cheers,
Vasanth

Overdelivery tolerance mismatch in MM03 vs PO

Similar Messages

Maybe you are looking for