Overdrive transfer problems with new ipad and old ipod

installed overdrive for ipad on pc (win 7) and ipad2 app. downloaded book from library site and it allows 3 transfers to devices.
hit "transfer" and get error message that overdrive is not able to connect to my device(s) yet itunes shows my device and syncs my other items.
tried the manually manage idea in the help threads. i use firefox. i have installed all of the many itunes/ipad/ipod updates, tried reinstalls, reboots and new attitude...but not getting anywhere.
help needed -thanks

Quote
Originally posted by Wonkanoby
1 the board will not accept nor load a drive with old chipsets drivers on it
do a clean install or over install
2 you have to set fsb to 166 with the xp 2500 in the bios
3 if your using an old psu i dout its going to be good enough
I am having a simular problem with system hanging up and getting blue screen from time to time.Running msi K7N2 Delta- L board with corsair value select VS1GBKIT400 PC3200 1024MB 2x64Mx64 2x184 DIMM,Leaktek winfast A250 ti4600 video card,antec 350w ps,xp home loaded on 30 gig wd 7200 drive and clean install.Not looking to overclock just want stable setup as about all I do is play with PSP7 and run driving games.Think I do not have bios settings correct as I am still a beginner.Any help or thoughts appriciated.
Thanks Bruce

Similar Messages

Having problems with new ipad and charging?? Help me please

I have the new ipad with retina display and it had that new smaller charger as you probably already know, well I've only had this ipad for about three months and I've already gone through two chargers for the same problem which is When I plug it in it does not charge unless I unplug it and plug it in about 40 times and then it starts to charge! Do you think it may have something to do with the ipad itself or am I just getting faulty chargers? It's not that cheap to keep re-buying these chargers ):

Drusillameow wrote:
... am I just getting faulty chargers? It's not that cheap to keep re-buying these chargers ):
Since your iPad is quite new, why are you "re-buying" chargers? Are you not using the charger that came in the box -- the original Apple charger? If you were doing that, and did not mishandle the charger (e.g., tug on the cord to pull the charger out of the wall socket), Apple would take care of the charger under its warranty.
So I suspect you're either mishandling the charger (not likely), or using some third party charger (more likely).
If it's the original Apple charger, and you're not mishandling it, contact Apple for assistance.

HT201628 Problems with new iTunes and old Mac

i had to uninstall itunes from my Mac os x 10.6.5 but now i can't install the newest itunes because it requires a later version, 10.7. What do i do now?

Mac OS X 10.6.8 Update v.1.1 - http://support.apple.com/kb/DL1400
About the Mac OS X v10.6.8 Update - http://support.apple.com/kb/HT4561
10.6.8 will let you install the newest iTunes.
Back up your computer first, just to be safe.

Wifi problems with new ipad

I'm trying to learn how to correct wifi problems with new iPad. It is the wifi only, 64GB model. I want to be able to use it at work, where we have a great wifi network. I can usually connect to our network with no problem, but after an hour or so my iPad loses the network. When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network. My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi.
I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question. I can't think of any other methods that are available to an end user to correct the problem.
I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms.
Can anyone offer any advice here? This is quite frustrating.

No problem! Have a read at this most interesting article which has special significance as regards your models!
http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
created by Texas Mac Man in Using iPad - View the full discussion
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom ;)

I cannot copy or sync any songs/ albums to my ipod touch 64gb. Have no problem with my ipad and iphone.

I cannot copy or sync any songs/ albums to my ipod touch 64gb. Have no problem with my ipad and iphone.

Tried both methods you have mentioned previous many times without success - to answer your questions
What exactly happens when you try to sync?
Nothing is copied
Does iTunes see the iPod?
Yes
Was the iPod previous synced to another iTunes library/computer?
No
Have you successfully synced from this iTunes library/computer before?
Yes - just once when I first got it
If so have you done anything like update iTunes on the computer since it last successfully synced?
Yes computer os has been updated, I think
Do the songs play in iTunes?
Yes, on my computer and on my ipad and phone
Does any media now sync to the iPod?
Yes, synced my iPhone first, this morning
Do you have the right boxes checked to sync?
Tried every combination imaginable, including the settings that I had when syncing my iPhone this morning.
Hope this helps - it's a real pain.

HT4060 I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual

I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.

Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout

Problem with New (7.7) & Old (7.6) Versions of Itunes

Well, I decided to upgrade to 7.7 and my Ipod locked up immediately afterwards when trying to transfer any music (it at least recognizes it's existance). I received a message from Windows in the bottom right of the task bar "Windows - Delayed Write Failed - Windows was unable to save the data for the file H:. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere."
I saw all the posts on this forum and thought that I could just rollback to 7.6 and wait until Apple fixes the bugs. Well I did and I'm still have the same problem. I completely wiped Itunes off my machine and reinstalled 7.6...still locks up everytime I attempt to delete or add anything to my ipod. It worked before I installed the new version, why won't it work when I basically am back to square one?

"Windows - Delayed Write Failed - Windows was unable to save the data for the file H:. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere."
Is the following document of any assistance with that?
"Delayed Write Failed" error message when you manage files in Windows XP

Any problems with new iPad Air 2?

I have an iPad 2 (2nd Generation) 512GB RAM w/32GB storage. Running out of storage room.
Thinking of getting the new iPad Air 2 128GB wifi
Before I buy one, any problems or issues with it? I hope the issues are only with iOS 8 and not the hardware.
iOS issues can be fixed with a new update.

Currently as of this post there is a random popping sound every so often, wifi shuts off sometimes and turns back on. The speaker vibrating isn't a defect but it's there because of how thin.

Troubleshooting why i'm experiencing email problems with new iPad...

I am a newbie with my iPad ... just trying to figure out why my email isn't working well on my iPad. I am receiving some email but not all... and
when I've tried to send an email, I am unable to do so.
I have checked my settings, but can't figure out the problem.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Since you are new to iPad .....
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Problems with new iMac and Adobe Creative Suite 2

Just wondering if anyone can help me out. I am a Graphic Design student and just bought Adobe Creative Suite2. I installed it on my new iMac, and it wouldn't open InDesign or Photoshop although I had no problems with Acrobat and Illustrator. A pop-up window stated that the program "unexpectedly quit". I have uninstalled and reinstalled three times and was on hold with Adobe Tech Support for three hours until I finally gave up. If anyone knows what's going on I would appreciate it!

I dragged the installer from the install disk to my desktop and was more successful in installing problem CS2 apps. Make sure to update everything as well. Some times it takes a restart to get the finickiness out of PS.

Newbie problem with new objects and tools.

in chapter 4 of the after effects essential training series from Lynda.com in the section about controlling animation with the pick whip. when he applies the null object the red bar immediately populates (correct usage?) the timeline to the right. when i apply the null object it's hidden to the left, under all the layer info, and i need to drag it out into view.
ive found that whenever i have a problem, e.g., im using a tool and nothing is happening, it always comes down to this same thing: the layer is not with everything else and i need to drag it out into view.
not only am i new to mac, but im only marginally literate and a total newb to anything more advanced than iphoto, any advice would be appreciated.

Rick Gerard wrote:
I'm not understanding what you are asking.
If you have a layer in the timeline, a null, and the parenting column is visible you simply click on the pickwhip next to the layer and drag it to the name of the null layer. The Parenting box now says that Layer 1 is connected to Null 1.
Now, when you move the null, the layer will move.
i understand what they do and how to set them up.
my question is more specific, but also applies more generally to other tools and layers. when Ian creates his null layer in the video (as well as other layers ive seen him create) the red bar that represents his null layer immediately appears in the timeline with the begining of the red bar at the left end of the work area. it is fully visible. when i create one the file shows up in the list of layers on the panel to the left of the time line, but it is not visible in the comp window and the red bar is hidden to the left side of the visible timeline to where you have to click its right end and drag it out from behind the panel on the left.
this has happened with other layers ive created using other tools and before i figured out what to look for it was very frustrating. now, whenever i can't find something, or a tool that im using isnt doing anyhting (besides creating more and more layers) ive learned to look and see if theyre just hidden. it seems like it's probably a setting. but clearly, something is different: he creates a null layer and it appears in the timeline, and mine appear slid to the left.

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

I am having so many problems with my ipads and my computers since I upgraded to Yosemite on my desktop! I have never been so frustrated with Apple. My apple at work also has a virus problem and my other MAC keeps rebooting!! My MAC at home burned

Problems with Yosemite: virus (malware), rebooting, burned hard drive, ipads keep losing wifi.

You're going to have to be more specific about the symptoms you're seeing. At the moment, I really have almost no idea at all what's going on. Also, be aware that upgrading your Mac to Yosemite has no effect whatsoever on your iPads.
If you're having a lot of ad problems or redirects in the web browsers on all these devices, you probably have some kind of network compromise, such as hacked network hardware:
http://www.adwaremedic.com/kb/hackedrouter.php
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Problem with Premiere Pro and Old School X3100

Hi everyone,
Got a problem here and really looking for help . I know the intel 965 or X3100 chipset/GPU (in a Dell inspiron 1720 running Win 7 64 bit) is way old school, but as we're waiting for a couple of i7/i5 laptop upgrades, this is what I have to resort to for some minor mobile SD editing (nothing extreme but 15-30s short commercials). With the current Intel driver (8.15.10.1930), the preview monitors (source and sequence) do not work. They're simply a blank frame (even after I render the sequence). It seems to be the Intel drivers whooping my butt as there is no problems with the standard W7 WDDM 1.1 display driver, except the computer isn't stable with freezes on wake (and no OpenGL support in PS... which isn't a big deal). I've also tried Vista 64 drivers in compatibility mode with no luck.
The rest of the CS4 suite works great. It is not the trial version and I've tried PP 4.0, 4.01, 4.1, 4.2, 4.2.1 (suggested by another post), and reinstallation. I've also tried changing settings in the Intel drivers and... even modded 965 drivers.
I know the X3100 is quite common (maybe not among PP users...) so any experience you might have would be awesome. Maybe an older Intel driver? If you can help me, I'll name my laptop after you! ...unless you realize that could actually be an insult Thanks!

This hardware sub-forum is a good place to read about what will run CS5
While HD editing (which I won't do) will require a RAID for data, what I am going to build for SD editing with CS5 and Win7 64bit is listed near the top of my notes page http://www.pacifier.com/~jtsmith/ADOBE.HTM
If you are adept with tools... build your own and save $$

Problem with New HDD and installation of Qosmio Player

Hi All,
Hope someone can help, I have had my Qosmio for 2 1/2 years now and recently had a problem with the hard disk. I decided to replace the hard disk as this was the quickest solution. The problem I have now is that I cannot receive TV on media center. I was trying to install qosmio player on the HDD to see if it made any difference but when I run the recovery disk supplied the software tells me that there is not enough disk space!!. The laptop came with a 60G hard disk and the new HDD made by the same manufacturer is a 150GB, can anyone help me out with this one would be appreciated.
Thanks
ED.

Qosimo F10.
Sorry my previous entry was garbled. I upgraded the HDD to 120, could not get the Qosimo player to reload, same error, No space on HDD.
I then upgraded to Vista and downloaded the new Vista Qosimo drivers, created the ISO image and booted from it. Still did not work.

Overdrive transfer problems with new ipad and old ipod

Similar Messages

Maybe you are looking for