Overflow Denominators 17 : 18

When importing my video file which was a screen capture I get the overflow error and I have tried importing with caps lock on and forcing after effects to a frame rate but it drops the frames and the video is slowed because the original video is a higher frame rate. Is there a way to up the frame rate above 60 so I can match what the video is? The video is also just under 50 minuets in length but that shouldn't have an effect on it.
tech specs:
After Effects
ver. 13.2.0.49
PC
Intel i5-3570 3.40GHz
20 GB RAM
64bit
Windows 7

Thanks for the help Mylenium. I converted it into MPEG4 instead of the MP4 file it was. It also dropped it in overall file size after converting which is a good thing.

Similar Messages

After Efects Error: overflow converting ratio denominators.(17 :;18)

Hello, I am experiencing a serious problem with after effects.
It started when I right clicked a clip in my premiere pro timeline and chose "replace with after effects composition." Upon moving the clip into my already open after effects project, the wrong still frame opened up in the comp viewer, followed by this error: After Effects Error: overflow converting ratio denominators.(17 :;18). Clicking OK does nothing, and even after closing after effects and restarting the computer, upon opening my project, I simply get this error which will not go away, and as long as it is open, I can do nothing else with after effects. I cannot just create a new project as several other comps are contained within this specific project, and because of this error I now have no access to them. What can I do to correct this?

Hi there
Well, I have this issue for two days so I was like "OMG!", but then I have found this forum and this post which gave me some clues what should I do or what to try...so: my problem was that when I did try to open my huge project (quantum of clips, pics, effects etc.) I got to that error message and when I clicked "OK" project opens TOTALY EMPTY so I couldn't try out any of your solutions (having CAPS LOCK ON didn't help, cos simply there was absolutely nothing inside the project)...so I began scratching my head saying something like: "Hey, wait a sec - what the...?!?!?!". After some messing with empty projects I was able to import my buggy project via IMPOERT>FILE>*.aep, but as soon as I open the composition inside it crashes with exact the same error message (but at least I was able to see what's inside) + some other errors. So I write them all down to a paper and after some time I noticed there are like 2-3 the same errors that occure most of the time...and those was errors with AF own internal effects of AUTO CONTRAST and LINEAR WIPE (+ one more but that one has no significancy and also I was not sure if that third one is internal effect or not: Classic 3D). Then automaticaly my next thought was: "Hm, OK, I should try disabling those effects and see what will happend..." - well, guess what: IT HELPED!!! I went to C:\Program Files\Adobe\Adobe After Effects CS6\Support FilesPlug-ins\Effects\ and there I changed the *.eax extension of those plugins to *.eax- (or any other "unnown" extension :-D). And after some while I narrow it to one definitive internal effect plugin bug of AUTO CONTRAST! So my guess is that the framerate bug (having not whole number as framerate, like some of you suggested here) is probably NOT AFTER EFFECTS INTERNAL BUG AS WHOLE, but reather bug in some of its internal effects dealing with it (the framerate) - hope it will help to resolve this many years long bug (+ sorry: english is not my native language :-D)
Message was edited by: eriqire9 - sorry, I by mistake write the buggy effect name wrong, it was AUTO CONTRAST, not Auto Focus :-)

After Effects error: overflow converting ratio denominators. (17 :: 18)

I have been working on learning how to use Adobe After Effects CS6 and it has been alot of fun, so I have decided to buy it! Except now... I ran in to an issue when I tried to place an effect on a portion of a layer to see if anything would happen; something horrible happened. There is a really annoying pop-up that will not go away! It reads: "After Effects error: overflow converting ratio denominators. (17 :: 18), and it has a red circular icon with a white exclaimation mark in the middle of it. This would be great if it was actually doing anything other than piss me off! It will not go away when I 'dismiss' it by pressing OK, and I fear that I will lose my footage now. I will be buying a different program 100% if I cannot fix this problem or get it explained, so for the sake of Adobe's consumer record, would anybody be kind enough to assist me? Thanks alot, I will be following up on this ASAP.
Much appreciated,
Riley Lloy
Nova Scotia
[email protected]

you will find an answer and workaround here: http://myleniumerrors.com/category/by-number/11-20/

After Effect error::overflow converting ration denominators(17::19)

I have a project in AECS3 that contains roughly 70 jpegs that are 10 seconds each with a dissolve between them. I went to add two more pictures and I get that error. I've tried opening the project in a new project and even tried to create a new project but still get the same error. Any suggestions?

Here's a Community Help search that pulls up several suggestions .

Error 17::18 overflow converting ratio denominators fix

i try doing that thing were u interpret the footage but it puts it down to 9 minutes it is making me very mad. any help would be very apreaiated

Whatever your tool says, it probably isn't recording at the framerate it claims. AE is drawing that info from the embedded streamflags of your H.264 and this is usually pretty correct. Tend to agree with Dave. This probably is the sole source of your issue. You really should consider mangling your clips through an ffmpeg encoder like Handbrake or MPEG streamclip to conform it to something usable and fix those inconsistencies.
Mylenium

Ratio Denominators error

Hi guys (and girls),
I'm having this error where when I try to add a video clip into an AE composition it gives me an error regarding my piece saying, "Overflow converting ratio denominators (17::18). I know there are a few other posts on this error on the thread but none are ore recent then early 2014 so I don't know how viable the answers still are. The file I am trying to add in is an MP4 file 2.5GB file size 1280x720 @ 30fps. If someone could just let me know how to fix it so I can fit the file in the composition without getting that error it would be greatly appreciated.
Thanks.

GreenMcCabe wrote:
As far as my version of AE I am using AE off of Creative Cloud which has been updating it automatically so it would be the latest version of AE for CC.
Yes, so that would be version 12.2.1.5
But that's not the latest version of After Effects. The latest version of After Effects is 13.2.0.49 (Which is After Effects CC 2014.2) CC and CC 2014 are completely different versions of the program and not a simple update. Also, sometimes the Creative Cloud app doesn't update correctly. We've had a lot of people lately who are on version 13.0.1 who thought they were updated. So, go to Help>About in AE and find out what your full version number is.
GreenMcCabe wrote:
As for transcoding the file into a different format would I be able to use Adobe Media Encoder to do that, and if so what format would you recommend using?
Possibly AME could do it. It might also have a similar error.
QuickTime with the Photo-JPEG codec would be a good intermediate codec.

SPOOL_INTERNAL_ERROR spool overflow when submitting the same program

I am submitting the same program via job with different seletion screen values after JOB_OPEN, and then SUBMIT statement and JOB_CLOSE FM. But this job get cancelled with message "ABAP/4 processor: SPOOL_INTERNAL_ERROR" . The submit is as follows:
SUBMIT (sy-repid) USER sy-uname
         VIA JOB 'ZTP_SAl_REG_MONITOR_JOBS'
         NUMBER l_jobcount
         TO SAP-SPOOL
         SPOOL PARAMETERS fp_user_print_params
          NEW LIST IDENTIFICATION 'X'
         WITHOUT SPOOL DYNPRO
         WITH rb_monit EQ 'X'
         WITH s_jobcnt IN s_jobcnt
         WITH p_date EQ p_date
         WITH rb_row EQ rb_row
         WITH rb_col EQ rb_col
         AND RETURN.
Is it possible to use the same program to be scheduled....Let me include that the submit is happening with rb_monit = X and it has separate branch...so infinite looping can not happen.

Hi Sumit,
I hope that the flag is ensuring that it doesnt go into infinite loop. You may wish to check that once bcz Spool overflow seems to be bcz of infinite loop or bcz of layout issue.
Goto SP01 in the same client where you have scheduled the job.
Check the spool no. which was generated bcz of the job.
Double click on the STATUS of the spool ( it should be in red background color).
System will give a popup with status details.
Again double click on the status. System will again give a popup.
The popup will give the details of why the spool ran into errors.
Also check the layout.
Thanks,
Best regards,
Prashant

Overflow in the operation:= error

Hi,
I get the following error in my DTP of a process chain:
Runtime error while executing rule -> see long text
Diagnosis
An error occurred while executing the transformation rule:
The actual error message:
Overflow in the operation :=
The error was triggered at the following program location:
System Response
Processing of this data record was cancelled
This issue seems to be because of the length of the target field being lesser than the source field.
Can you please let me know how this issue can be resolved since the DTP is added in a process chain?
Thanks in advance.

Hi,
As long as without knowing exact infoobject not easy to suggest direct solution.
Assuming as your loading data from PSA to Cube.
Go to your transformations, Menu Extras--> tabular overview, compare each source and target object length, need to be the same.
if any target object length is lesser than source field , that length need to increased.
Thanks

RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ''

Hi,
While executing the below code i am getting the error
" RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ' ' am new to ABAP , can anyone kindly help me where i have went wrong ? .
IF ( V_DO_CDS_NAME_MAIN <> '' ).
    ABAP.
        DATA: ref_it_tab TYPE REF TO data,
              ref_wa TYPE REF TO data.
        FIELD-SYMBOLS: <fs_itab> TYPE ANY TABLE.
        FIELD-SYMBOLS: <fs_wa> TYPE ANY.
        FIELD-SYMBOLS: <fs_field> TYPE ANY.
        CREATE DATA ref_it_tab TYPE STANDARD TABLE OF (V_DO_CDS_NAME_MAIN) WITH NON-UNIQUE DEFAULT KEY.
        ASSIGN ref_it_tab->* TO <fs_itab>.
        SELECT * FROM (V_DO_CDS_NAME_MAIN) INTO TABLE <fs_itab> where C1 = V_WORK_ITEM_ID_MAIN.
        CREATE DATA ref_wa LIKE LINE OF <fs_itab>.
        ASSIGN ref_wa->* TO <fs_wa>.
        loop at <fs_itab> assigning <fs_wa>.
            assign component 'CLIENT' of structure <fs_wa> to <fs_field>.
            V_CLIENT = <fs_field>.
            assign component 'C0' of structure <fs_wa> to <fs_field>.
            V_C0 = <fs_field>.
            assign component 'C1' of structure <fs_wa> to <fs_field>.
            V_C1 = <fs_field>.
            assign component 'C2' of structure <fs_wa> to <fs_field>.
            V_C2 = <fs_field>.
            assign component 'C3' of structure <fs_wa> to <fs_field>.
            V_C3 = <fs_field>.
            assign component 'C4' of structure <fs_wa> to <fs_field>.
            V_C4 = <fs_field>.
            assign component 'C5' of structure <fs_wa> to <fs_field>.
            V_C5 = <fs_field>.
            assign component 'C6' of structure <fs_wa> to <fs_field>.
            V_C6 = <fs_field>.
            assign component 'C7' of structure <fs_wa> to <fs_field>.
            V_C7 = <fs_field>.
            assign component 'C8' of structure <fs_wa> to <fs_field>.
            V_C8 = <fs_field>.
            assign component 'MESSAGE_ID' of structure <fs_wa> to <fs_field>.
            V_MESSAGE_ID = <fs_field>.
            assign component 'TIMESTAMP' of structure <fs_wa> to <fs_field>.
            V_TIMESTAMP = <fs_field>.
            assign component 'EXTRACTKEY' of structure <fs_wa> to <fs_field>.
            V_EXTRACTKEY = <fs_field>.
            assign component 'STATEID' of structure <fs_wa> to <fs_field>.
            V_STATEID = <fs_field>.
            assign component 'DEVICE_ID' of structure <fs_wa> to <fs_field>.
            V_DEVICE_ID = <fs_field>.
        ENDLOOP.
    ENDABAP.
ENDIF.

Hi Mubeen,
While Copying the cotes have come closer otherwise its working fine , i was able to find the error .
There are ten predefined ABAP data types. There are 100 possible type combinations between these elementary data types. ABAP supports automatic type conversion and length adjustment for all of them except type D (date) and type T (time) fields which cannot be converted into each other.
I commented the TimeStamp part where i had given the ABAP Type as D and it started working .
But now i want to display the content of "TimeStamp" field but i am not able to do so .
This is the format in which it has to be displayed 2009.011.915.3353.
Which ABAPTYPE i need to use ?.
i am able to display in this format 20090119153353
regards
Harsha

SAP paging overflow when storing data in the ABAP/4 memory.

I am trying to create a data source in BI7.0 in the Datawarehousing Workbench. But along the process when i need to select a view i get an error detailed in the following error file extract: Please go through and assist.
untime Errors MEMORY_NO_MORE_PAGING
Date and Time 06.06.2009 14:21:35
Short text
SAP paging overflow when storing data in the ABAP/4 memory.
What happened?
The current program requested storage space from the SAP paging area,
but this request could not be fulfilled.
of this area in the SAP system profile.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The ABAP/4 runtime system and the ABAP/4 compiler use a common
interface to store different types of data in different parts of
the SAP paging area. This data includes the
ABAP/4 memory (EXPORT TO MEMORY), the SUBMIT REPORT parameters,
CALL DIALOG and CALL TRANSACTION USING, as well as internally defined
macros (specified with DEFINE).
To store further data in the SAP paging area, you attempted to
allocate a new SAP paging block, but no more blocks were
available.
When the SAP paging overflow occurred, the ABAP/4 memory contained
entries for 20 of different IDs.
Please note:
To facilitate error handling, the ABAP/4 memory was
deleted.
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 8176
Extended memory (EM)........... 13587912
Assigned memory (HEAP)......... 0
Short area..................... " "
Paging area.................... 40960
Maximum address space.......... " "
By calling Transaction SM04 and choosing 'Goto' -> 'Block list',
you can display an overview of the current roll and paging memory
levels resulting from active users and their transactions. Try to
decide from this whether another program requires a lot of memory
space (perhaps too much).
The system log contains more detailed information about the
termination. Check for any unwanted recursion.
Determine whether the error also occurs with small volumes of
data. Check the profile (parameter "rdisp/PG_MAXFS", see
Installation Guidelines).
Is the disk or the file system that contains the paging file
full to the extent that it cannot be increased, although it has
not yet reached the size defined in the profile? Is the
operating system configured to accommodate files of such a
size?
The ABAP processor stores different types of data in the SAP
paging area. These include:
(1) Data clusters (EXPORT ... TO MEMORY ...)
(2) Parameters for calling programs (SUBMIT REPORT ...),
Dialog modules (CALL DIALOG ...) and transactions
(CALL TRANSACTION USING ...)
(3) Internally defined program macros (DEFINE ...)
Accordingly, you should check the relevant statements in a program
that results in an overflow of the SAP paging area.
It is critical when many internal tables, possibly with
different IDs, are written to memory (EXPORT).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MEMORY_NO_MORE_PAGING" " "
"SAPLWDTM" or "LWDTMU20"
"TABC_ACTIVATE_AND_UPDATE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.

Hi Huggins,
Maintenance of the Paging File is owned by your basis team.
They should increase this in order for your transaction to process successfully.
Just for your reference, in case the OS used is windows server 2003, paging file value can be checked through;
Right click in the My Computer>properties.
Then go to Advance tab;
Then there should be a performance section, click the settings
Then Advance tab again. The paging file can be seen from there.
(and can be adjusted from there also)
The value of the paging file in general will be dependent with the available RAM from the hardware.
Hope this helps. Thanks a lot.
- Jeff

Cannot Send Email from Crystal Reports Viewer; MAPI:Overflow

I am trying to send a report via email with crystal reports, but i get the following error message:
"The following unexpected error occured while trying to send the report to MAPI: Overflow."
I am using Outlook 2010, Win 7 x64 bit.
Does anyone have any ideas or thoughts?

Yes, it is a 3rd party app that opens Crystal Reports Viewer. Attached are the screen shots I get when try to send the report as an email.
-Dan

Short Dump : Page Overflow

Hi All,
When i am executing a report on Production, i am getting short dump - "Page overflow".
It's very urgent.
Early response will be highly appreciated.
Best regards,

Can you provide more details?
From what it looks like, i think your basis should increase the memory allocations for your internal tables.
Regards,
Ravi

ALV Report - Field Overflow message in status Bar

Hi
I am trying to display ALV report , ALV report is displaying fine but on execution of report , an message in status bar is coming as "Field copy Number can not be totalled because of field overflow."
Can anyone tell why such messgae is comming?
Thanks,
Debadatta

Just a wild guess, treat the below as an example.
Eg:
assuming one field in the output is of length 2 type i.
values: 20, 30, 60, 45.
Totalling the values result as 155. but due to the length of the field as 2. We can encounter the overflow message.
Considering the above example, manually total the values of your numerical columns and see if any of the column is execeeding the specified length.
Regards
Eswar
Note: Reward if you find the info useful.

XMLTRANSFORM Too large stylesheet - code buffer overflow issue

Hi All,
My question is related to MSWordML generation from PLSQL stored procedure.
1. I have table, containing XSLT stylesheets for different documents
2. PLSQL stored procedure is generating dynamic content depending on some params and at the end I'm using
SELECT XMLTRANSFORM(XMLTYPE.createxml(db_data_clob), XMLTYPE.createxml(x.xslt_clob)).GetClobVal()
INTO res
FROM msword_ml_data x
WHERE x.report_id = rep_id_variable;
where : x.xslt_clob -> column, containing XSLT CLOB
db_data_clob -> dynamic content CLOB
res -> CLOB result
All this was working fine on Oracle11gR1, but I had to reinstall database and I said why not install Oracle11gR2 ...
Guess what. Stored procedure is raising exception when using XMLTRANSFORM :
Exception : : ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00004: internal error "Too large stylesheet - code buffer overflow"
Google says nothing about it. I don't recall setting some special DB property in Oracle11gR1.
Has anyone encountered this ?
I haven't changed procedure nor table.
I'm using exactly the same XSLT's from Java code and they are working just fine, so they are not the reason. My guess is that something in Oracle11gR2 related to XML processing is changed.
If anyone could help, thanks in advance

For those who are interested.
I have logged a service request and it turned out that this is is a bug in Oracle 11gR2.
"The limitation on the style sheet is not exactly a size limit but a limitation on the number of style sheet instructions and depends on the way the style sheet has been written. This is a C based parser limitation"
Anyway, the workaround is to create Java stored procedure and do transformation from there.

Questions on in-memory with disk based overflow cache.

Hi, support
I want to create a cache which have two tiers, one is size limited local cache and the other uses a disk as a storage. As you said if the local cache is full, the other data will be moved to external cache (on disk). Does it mean the other data will be saved in a temp file? If so, could you let me know where is temp file? The config file is attached.
Btw, although I used on disk cache as a external cache, I got Exception in thread "main" java.lang.OutOfMemoryError: Java heap space also when I put lots of data into the cache.
Thanks a lot.
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
     <caching-scheme-mapping>
                    
          <cache-mapping>
               <cache-name>bufferStorage</cache-name>
               <scheme-name>SampleOverflowScheme</scheme-name>
          </cache-mapping>
     </caching-scheme-mapping>
     <caching-schemes>
          <overflow-scheme>
               <scheme-name>
                    SampleOverflowScheme
               </scheme-name>
               <front-scheme>
                    <local-scheme>
                         <high-units>100</high-units>
                    </local-scheme>
               </front-scheme>
               <back-scheme>
                    <external-scheme>
                         <lh-file-manager/>
                         
                    </external-scheme>
               </back-scheme>
          </overflow-scheme>
     </caching-schemes>
</cache-config>
Message was edited by:
user620684

Hi, Jon
Thanks for your help.
I will use an unconfigured LH file manager(I mean the file path and name will not be specified.).
Currently, find the temp file will be created in C:\Documents and Settings\$user_name\Local Settings\Temp in windows.
I have two questions on temp file.
1) Does tangosol supply a mechanism to maintain the temp files?
2) In solaris, which place will the temp file be created in?
Thanks,
Bin
null

Overflow Denominators 17 : 18

Similar Messages

Maybe you are looking for