Overflow field conversion type P

The MM is a problem with the transaction MB1C.
When she tells convert to KG / TN is the following message:
An overflow field during the conversion. Possibly, the User defined parameters transfer very small. (This is probably the case of fields type P and I).
Someone has gone through this?
Thank you.

Dear,
It occurs if the n alternative unit of measure which is a smaller unit than the base unit of measure (for example, base unit of measure = kg, alternative unit of measure = g). Same case in your error also.
Regards,
R.Brahmankar

Similar Messages

  • Document splitting causes field overflow for currency type 00 in row 003

    Hi ,
    Friends ,
    Our some of sales bills are stucking iduring  posting to finance after upgrading support packages, earlier there was no any problem.
    we are trying to post by tcode vf02 , it is throughing an error message
    Document splitting causes field overflow for currency type 00 in row 003
    Message no. GLT0004
    We are not getting any solution .
    We have raised a message to sap support , but not getting proper solution,
    Please guid us how can we solve this.
    SS
    Mobile no. 9810477923- Sundeep Gupta

    Thanks for all.
    we have solved this issue  after change some customization according sap support consultant reply as under.
    you have 3 different issues within your SD- new g/L interface.
    The most critical one is the fact that you substitute PRCTR and
    Segment assignemnts into line items to be processed by rule based
    split. This leads to the fact that you will only those cases will be
    able to post document in case the assignemnts are unique,
    which means no different kind of prctr, segment and business area
    assignments but only one single kind. This makes no sence at all.
    Please see my last reply regarding this most critical issue.
    This needs to be solved from Consulting point of view.
    Regards.
    SS
    Edited by: Lakshmipathi on Dec 22, 2010 12:21 PM
    When you say it is answered why you have closed the thread with Closed but Unanswered.  Please change it to "Answered".

  • Document Splitting causes field overflow for currency type 10 in row 007

    Dear All,
    At the time of Invoice through FB60 system is showing the above error Document Splitting causes field overflow for currency type 10 in row 007  & Message No :  GLT0004.  What could be the reason. 
    Regards

    Dear Raj,
    Please refer below link
    Document splitting causes field overflow for currency type 00 in row 003
    Br,Vivek

  • Document splitting causes field overflow for currency type 10 in row 001

    Hi Experts,
    I come across below error, while posting an entry in to SAP.
    "Document splitting causes field overflow for currency type 10 in row 001"
    Request your help in resolving the above.
    regards,
    Gopala

    Dear expert
             Document Splitting causes field overflow for currency type 10 in row 007
             GLT0004 - Document splitting causes causes field overflow
    Regards
       Ajeesh.s

  • GLT0004 - Document splitting causes causes field overflow for currency type

    Hi,
    Has anyone faced this error while performing MIGO?
    Error " GLT0004 - Document splitting causes causes field overflow for currency type 10 in row 002)
    am refering to note 1072850, but cannot find any relevant information.
    Would appreciate any replies on this.
    Thanks in advance,
    J

    Hi,
    I have resolved the problem ,
    Business transaction for document type WE changed to 0600 from 0000.
    J

  • Data conversion error. Overflowed the specific type.

    Hi guys, as usual I am struggling with the data conversion. I have got a column BS as Float in SQL, the usual values is 10.5656445, 899.66552366 etc. I'll try to move in Excel the data but I wish to have only one decimal. I try decimal in the data conversion
    with precision 1 but it returns me the same value now I am trying
    numeric, precision 1 but it returns the error "Conversion failed because the data value overflowed the specified type". Any suggestion? Thanks

    Could you tell me what should be the result for 10.5656445, 899.66552366?  Is that 10.5, 899.6 ?
    If yes then, set Precision: 4, Scale: 1
    (This is a total of 4 digits, 3 digits for the whole number and 1 for the fractional)
    Cheers,
    Vaibhav Chaudhari

  • Currency Conversion type not visible in the query

    Hi ,
    I created one currency type conversion   Z_INR
    exchange rate type : M
    Exchange rate from infoobject : zexch_rate(key fig)
    source curr from data record
    Fixed target curr : INR
    Variable time reference  : A to Exact Day
    Special info object : Ztr_date (Transaction date)
    it got saved succesfully but wen i try to include  this in the query its not visible there . can anyone let me know why this problem is coming
    help will be appreciated .
    i also included rate and date in the query still not visible

    Hi,
    Create Currency conversion type using Trans: RRC1.
    1.Specify your Exchange rate type.                     
    2.Dynamic Exchange rate type
    3.Source curency from data rec.
    4.Fixed currency say USD.
    5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
    Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
    Thanks,
    Nagesh
    Sony Singapore

  • Function Module using Quantity conversion type

    Hi,
    I need to know the function module which uses the quantity conversion type created in RSUOM and should provide the converted value as the result.
    I know the function module which convert the units based on the input. But need to know the FM which uses conversion type.
    I tried conversion type available in the transformation rules. But it is not working for a particular case. So thought of doing the same inside a routine.
    Awaiting for your reply
    Thanks!

    Try this and check
    select vbakvbeln vbapposnr vbakvkorg vbakvtweg vbak~spart
    vbakvkgrp vbakvkbur vbapmatnr vbapmatkl vbap~zieme
    into CORRESPONDING FIELDS OF table it_data
    from vbak
    inner join vbap on vbapvbeln eq vbakvbeln
    where vbak-vbeln eq vbeln.
    Regards,
    Atish

  • Quantity field conversion problem in SAP script

    Hi experts,
    I have problem with sap script quantity field conversion.
    In purchase order the actual value of field( MDPM-ERFMG) is 3,500.
    But in Print preview it is showing only 3.5
    Any one Please help me in this problem
    thanks in advance
    murali

    Hello,
    check this:
    Number of Decimal Places
    A program symbol of one of the data types DEC, QUAN, and FLTP can contain decimal place data. Use the option below to override the Dictionary definition for the number of decimal places for the formatting of this symbol value.
    Syntax
    &symbol(.N)&
    The EKPO-MENGE field contains the value 1234.56. The Dictionary definition specifies 3 decimal places and an output length of 17.
    &EKPO-MENGE& -> 1,234.560
    &EKPO-MENGE(.1) -> 1,234.6
    &EKPO-MENGE&(.4) -> 1,234.5600
    &EKPO-MENGE&(.0) -> 1,235
    REgards,
    Vasanth

  • Date field conversion

    hi gurus! can someone give me a  tip on a date field conversion.
    I have a field that comes YYYYMMDD but i want to convert to DD.MM.YYYY
    Can someone help me on this
    Thk, Regards

    REPORT  Z_82235_TEST4                           .
    data:  date1(8) type c,
           date2(10) type c.
           date1 = 'YYYYMMDD'.
    CONCATENATE date1+6(2) date1+4(2) date1(4) INTO date2 separated by '.'.
    you pass your date to date1 in place of 'yyyymmdd' and you will gate ur desired output on date2.

  • How to conversion TYPE P to CURR in smartform

    How to conversion TYPE P to CURR in smartform for creating structure, in my program field  fin_prd(13) TYPE DECIMALS 3.
    i assigned structure to final table I_FINAL in smartform, in the structure field FIN_PRD as CURR decemals 3 i have taken.whenever executing the smartform its showing type conflict, can you please help me.

    Hi Bhupal,
                  could you please create data element with more size.
                  compare to Curr 13(3)
                 and assign the filed FIN_PRD type as 'data element' in your program.
    warm regards
    mahesh

  • Input Field of Type Time Unable to Keep Input Value

    Hi,
    I am facing the following problem:
    I am using an input field of type time that initially its value comes from a BAPI call. I want though to be able to change its value and use the same field as import parameter for another BAPI. The value of the field is populated correctly from the first BAPI but when I try to change it, the value disappears and it does not keep what I type within the field i.e. the field remains empty.
    Could you please let me know how to resolve this problem?
    Thank you in advance.
    Kind Regards
    Michael

    which runtime do you use?
    which version of VC?

  • A field of type I is showing Zero in display mode

    Hi,
    I have module pool program, with create, change and display buttons.
    Here I have a field PERNR type PERNR_D.
    This field is not a mandatory field. so, I am creating a record without entering any value in this.
    But when I go into display for this record, it is showing '0'.
    How to remove single zero in display mode?
    I tried with the following code but it is not working for me.
    if zstruct-zpernr eq '00000000'.
      write zstruct-zpernr to zstruct-zpernr no-zero.
      endif.
    Please advise me here

    I tried all the ways except using char08.
    as permy spec, I should not use this type.
    So,
    I tried to remove  '0' by using the following code.but it is giving error as follows.
    Please help me
    Code:
    if Zstruct-zpernr CO '0'.
      if ( Zstruct-zpernr eq '00000000' )  or (Zstruct-zpernr is initial ).
      write Zstruct-zpernr to Zstruct-zpernr no-zero.
    endif.
    error log:
    Value  is not numeric
    Message no. E2135
    Diagnosis
    A value that is not numeric has been entered for a domain with a numeric data type. This is not allowed.
    System Response
    The system cannot accept the value.
    Procedure
    Correct your entry. You must enter a numeric value.

  • How to print the value of a field of  type FLTP

    hi experts,
    pls tell me how to print the value of a field of  type FLTP. i.e in decimal format not in exponential format.
    thankyou.
    krishna

    Hi ,
    I dont think in Floating point u can able to go for the decimal point display as it is for the minimum precission display..
    Define the variable as the 'packed' type and then u can able to define the decimal point...
    Cheers,
    SImha.

  • Help with writing and retrieving data from a table field with type "LCHR"

    Hi Experts,
    I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
    Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
    Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
    Thanks in advance,
    C
    SAVING THE LIST DATA TO DB
    DATA: L_WA(800).
    LOOP AT T_TAB into L_WA.
    ZDBTAB-DATALEN = STRLEN( L_WA ).
    MOVE: L_WA to ZDBTAB-RAWDATA.
    ZDBTAB-LINENUM = SY-TABIX.
    INSERT ZDBTAB.
    READING THE DATA FROM DB
    DATA: BEGIN OF T_DATA,
                 SEQNR type ZDBTAB-LINENUM,
                 DATA type ZDBTAB-RAWDATA,
               END OF T_TAB.
    Select the data.
    SELECT linenum rawdata from ZDBTAB into table T_DATA
         WHERE repid = w_repname
         AND rundate = w_rundate
         ORDER BY linenum.
    Populate calling Internal Table.
    LOOP AT T-DATA.
    APPEND T_DATA to T_TAB.
    ENDLOOP.

    Hi Anuj,
    The unicode flag is active.
    When I run our report and then to try and save the list data a dump is happening at the following point
    LOOP AT T_TAB into L_WA.
    As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
    When I try to load a saved list the dump is happening at the following point
    APPEND T_DATA-RAWDATA to T_TAB.
    T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
    In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
    Regards
    C

Maybe you are looking for