Overhead key in network order

Hello,
Does anyone have an idea how to import a default value to the field "Overhead key" when creating a network header?
It is not a substitution field.
Thanks in advance
and best regards.
Nir

Hi Nir,
Maintain Overhead Key in project profile in OPSA. and it will come by default for all networks created under any project with that Project profile.
Hope this helps you !!
Br,
Hari.

Similar Messages

Manage-bde command is not generating recovery key on network location

Hi,
I am trying to save the recovery key to the network share location and start up key in the USB drive while enabling bit locker.When the OS drive gets encrypted, the default folder for recovery password shows that it contains 1 file but not getting anything
inside it when i checked the properties of the folder.
i have already changed the group policy as "choose default folder for recovery password".
I am using the command to enable the bit-locker as "manage-bde.exe -on C: -rk
<network location to save recovery key> -sk <location of the USB drive>
-rp to enable the bit-locker. It is generating the start up key in the USB but not the recovery key on network share.
Can anyone suggest what i am missing or what else i should do to generate the recovery key on network share.
Does manage-bde process be able to save the recovery key on network share or it hand over to some other process to perform this task.
Thanks
Gaurav Ranjan

I got you Manoj, but I want to ask you one think that what if i lost the startup key or my USB stick. I have my recovery key on the network share. In order to log-in my machine I need the recovery password. From where i will get the recovery
password(48 digit). Surely from the recovery key on the network share. So how can i get the recovery password if only we have the recovery key.
I know both are different in context. Both are two different thing. I have lost my USB stick along with the recovery password and I have to log-in my machine. How can i do that i want to know that. Do there is any method to get recovery password from the
recovery key on network share. I have retrieved the recovery password when the recovery key in AD. But this time it is on network share.
Also one think which I need to solve is that the manage-bde -protectors -add command creates a new .bek file along with the older one. So the .bek file which get shown at the time of the start up of the machine is different from that stored in the network.
So i am getting confused as which .bek file is for which machine and hard to retrieve the password.
Is there any method to store recovery key on network without the -protectors -add command line so that both the .bek file should be matched and can easily be known for indiviual machine in an OU. As if both the .bek files will be different it would be difficult
to to retrieve the recovery password for the machines.
Please do inform if you need some more information about the scenario if i missed something.
Thanks
Gaurav Ranjan

Overhead calculation not happening after using Overhead key and orgin group

overhead calculation not happening after using Overhead key and orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

Add overhead cost in sales order item having service material

Hello Experts,
I have created a billing request through RRB from service order.
This billing request has service materials in it.
I want to add overhead to these individual items.
I can see costing sheet / overhead key field in these items.
But I dont know how to handle this in sales.
Can you tell me the process to handle this.
Regards,
Vijay

Sorry,I use this user exit program 'MV45AFZZ'.
source code like below,
FORM USEREXIT_MOVE_FIELD_TO_VBAP.
VBAP-zzfield = xxxx-zzfield2.
*{   INSERT         KHDK900234                                        1
      If SVBAP-TABIX = 0.
     SELECT SINGLE LGORT FROM MARD INTO VBAP-LGORT
                          WHERE MATNR = VBAP-MATNR .
      endif.
*}   INSERT
ENDFORM.

Overhead rate maintained sales order aswellas production order

Hi Guru,s
My Client using overhead rates in a particular costsheet for SD and PP.The overhead rate maintained a particular profit center.these particular profit center maintained sales order aswellas production order.In this case we need to calculate costing for sales order only for this profit center not production order.Any setting required to ovecome this problem.Could you plz help on this regards,
Thanks&Regards,
Prakash.

Hi,
There is no specific setting is reqd. If u want to calculate the overheads for production, then u need to define the base % and the overhead key. But in sales order you need to maintain the condition type. This will take care of your reqmt.
Regards,
V. Suresh

Overhead Calculation for Internal Order

Hi Gurus,
I have created one internal order and made the reservations.
I have configured all Overhead Keys and Overhead Groups. I have also maintained the rates for the same.
Now while i m running the overhead calculation for internal order, I am getting below stated result:
Y141 Machine Cost 5000 INR 100 KG Rs. 555.27
Y142 Labour            60    INR 100 KG Rs. 1110.54
Y143 Utility              60    INR 100 KG Rs. 2221.08
Y144 QC/QA Exp     5000 INR 100 KG Rs.4,442.16
Now u can see that overheads are doubled evrytime. I have made the configuration perfectly. I m demn sure abt it.
But i think i m lacking somewhere because such kind of ridiculous overhead should not come.
Pls help me in this regard.
Hope to get back u frnds!!!!!!!!

hi
check work center settings. i.e capacity calculations
regards,
sreekanth

Catalog B-Tree: "Keys Out of Order"

One day my ibook G4 suddenly stopped working. It started up, but there was only a blue screen. The cursor worked, but the desktop, dock, everything else was gone--nothing to click on.
I went to Apple support and discussions and followed info given there:
I ran the Hardware Test disk: It said everything passed. After that the apple and start-up window appeared, but it stopped, usually after "Starting Network..." came on, then it would become an all blue screen once again...and the cursor was frozen in the upper left hand corner.
I reset the PMU and tried to run the software restore disk, (shutdown and restarted holding "C" down). This time the start up got as far as "...time synchronization..." then stopped and went to blue screen again. (The disc icon didn't come up on screen, nor did it just start working as the Hardware Test disc did.)
After more research in the discussion groups, I started up in single entry mode and ran an "fsuk" check. It gave the "Catalog B-Tree: keys out of order" and Macintosh HD cannot be repaired message.
Then I read that if you have an "Extended" journal (or ?) the fsck might give benign error messages. So I don't know if the Catalog B problem is correct or not.
Further research led me to "Computer stops responding at "starting Network Filesystem" which is exactly where it stopped before I reset the PMU (which I understand resets the clocks).It suggests there is an NFS export Loopback problem and says to restore my network.nidb file from a good backup (what would that be?) or delete or modify the mount(s) causing the issue (also clueless as to what that might be).
I am hesitant to do anything else. (One bit of info said that if there is a file directory issue such as Catalog B, running and Upgrade or Archive and Install might worsen the problem.)
Can anyone here let me know what I should do, or if this is a fixable problem?
Thanks!

What Format is the Disk?
If it's HFS+ hen DiskWarrior® stands a good chance of fixing it, much better than fsck anyway.
Don't trust the Apple HW CD... it's next to worthless for finding problems last time I used it.
You can also pull ALL yhe Batteries and AX, let it set overnite, to reset everything.
If the HD is really shot, then you'll need an external HD and one of these...
http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1
http://www.prosofteng.com/products/datarescueinfo.php

Keys out of order -- follow up to earlier post

I ran the install disc Disc Utility Test and the Hardware Test disc on the computer since I posted my first question earlier tonight "Computer won't finish start-up -- any suggestions". The Hardware Test came back fine. The Disc Utility test on the install disc says: Keys out of order. It does not, however, explain how to repair this problem on the hard drive.
Is there any way to fix this problem on the hard drive?
Power Mac G4 Quicksilver Mac OS X (10.3.9)

Invest in DiskWarrior. I had the same problem and DiskWarrior fixed it. No other utility programs worked for this problem. DiskWarrior is very inexpensive. Ordered online in the afternoon. It was delivered to my office the NEXT morning.

MRS Auto Scheduling Network Order

Has any one in the forum implemented or know how to achieve Automatic Scheduling of Demand (Network Order/ Network Activity ) created through PS (Project Systems) in the MRS tool. ? Using Service Orders, this is a configurable item, with a BAdI for changes if necessary. But this does not apply to Network Orders. I am considering various options, but would like to know if this could be done without modifying an SAP standard program. Options tried out include calling FM ; /MRSS/API_ASSIGNMENT_CRE, this however fails to assign the demand in the planning board, although it would assign demand in debug mode. I have equally tried Recoding and creating a BDC, but the Resource fields are not captured in the recording. Any hint would serve.
Regards
Oppress

Have you tried automatic scheduling on the network itself? In PS you can configure the network to auto schedule if the dates are changed. You may find that making changes to the dates in the network from MRS causes the network to reschedule itself.
mike

I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red-keys out of order, and --Volume corrupt, can't be repaired. I tried

I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red…keys out of order, and ……Volume corrupt, can't be repaired.
I tried to do a system install, but message said…disk can't be changed. Will a complete erase and install fix this ?
Everything is backed-up.

There's hardware and software.
Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes). The directory that keep track of files is corrupt. Disk Utility can help determine if that is the issue. In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that. You have to boot from another drive. Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case. Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
In your situation it does sound serious and not just minor directory corruption. You can try erasing (formatting) the drive, You may need to do this if it is really corrupt, in which case there could be underlying physical issues. I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation). This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data. If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format. Then you know you need a new drive.

"Keys out of order" message in Disk Utility

Hi,
I was just doing a regular maintenance check with Onyx and to my surprise it said I needed to repair the disk using the Installer DVD and Disk Utility.
I did this and again to my surprise I seem to have a problem.
After the whole processs is complete these messages come up:
"keys out of order" (in red)
1 HFS Volume repaired (in green)
1 Volume could not be repaired (in red)
I don't know what to do about this. On the one hand my system seems to be running fine, but on the other if these errors are coming up then surely there is an issue which I need to resolve.
Could someone enlighten me on what to do next?

Hi,
Thanks. Unfortunately my battey died and now I am stuck on the apple logo at reboot. Opening disk utility via the install disk doesn't work as disk utils doesn't recognise any disks (even though I hear them spinning)
I am lucky in that I am able to access th powerbook's HD in target mode via firewire on my G5
so I am going to copy over a lot of my data and then invest in Diskwarrior.
However, I am a little confused with the Diskwarrior website. I would prefer to download as I am not near a shop to buy the software and I would rather not pay for express amazon delivery.
Would I be able to use the download of diskwarrior on my Powerbook?
It seems a little confusing:
"If You Are Purchasing DiskWarrior
Repairing your usual startup disk requires that you start up from another disk. In order to use the download copy of DiskWarrior, you will need to start up from another disk with Mac OS X 10.3.9 through 10.4.x installed. You will then need to run a copy of DiskWarrior from a disk that is not the disk you are repairing. (The DiskWarrior download does not include the Apple System files necessary to create a startup CD.) If you cannot use the download version of the software (i.e. you have only one internal hard drive and this is the drive you wish to repair), please order directly from our sales department or from one of our resellers to be sent the software on CD. If you order via the secure server, you will be sent a CD, but delivery of your CD will take approximately three to four weeks, depending on your location."
Basically I am in a hurry to get my Powerbook working by Thursday my two options are
a)Buy from Amazon and pay extra to get express delivery by wednesday
b)Buy download from Alsoft (with cd version on way in 2-3 weeks)....however if the download version is not sufficient then i'm screwed.
I'd really appreciate help here. It just happens that I have to work away on Thursday....and I therefore need my powerbook. I usually use my G5 in my home studio.
THANKS!!
Message was edited by: recall

How to use Standard Text Key in maintenance order header long text?

Dear All,
I have created a standard text key using transaction CA10 and I want to use this in maintenance order header long text. Is there any way to select any standard text key in maintenance order header long text?
Regards & Thanks,
Saif

Hi
To use standard texts, perform the following six steps:
Select the maintenance order and access the operation overview screen using Goto -->Operation overview.
You can enter standard text keys in this screen or in a detail screen for the relevant operation.
Enter a standard text key in the appropriate field and press ENTER .
If the text is longer that the short text line available, the field Text is selected for that operation.
Check the long text and edit it if necessary. To do this, select the operation and choose Operation--> Long text.
The system branches to the text editor screen. If you also entered a short text for the operation and specified that this should not be overwritten by the standard text, you will see the short text displayed in the first line of the editor. The following lines contain the standard text.
Check the standard text and change it if necessary.
Save the final version of the text and return to the previous screen with Goto--> Back.
Save the maintenance order.
Standard texts are created for your system by your system administrator using the Customizing function.
Regards
Makarand Gurjar

Macintosh HD can't be mounted, keys out of order and repairing can't be completed

Hi,
English isn't my mother tongue so I'll make my best to be understood.
I have a Macbook Pro from 2012, running on Yosemite (latest version). I installed Onyx which told me my disk needed to be verified and repaired. Following this advice, I restarted my computer with Disk Utility and completed a verifying and repairing. Which led to a terrible outcome. Since then, everytime I boot with my user on my Mac, my computer shuts down in the middle of the progress bar. I tried to find an explanation to it and fix it, so I tried the following things:
1) I booted with CMD + R to go into Disk Utility
2) I runned a verify Disk on "Macintosh HD" Core Storage Logical Volume Disk, which didn't give me any error
3) I unlocked "Macintosh HD" Mounted encrypted partition and runned a verify disk, which says :
"Keys out of order
The volume Macintosh HD was found corrupt and needs to be repaired.
File system check exit code is 8.
Error : the disk needs to be repaired, Repair disk."
4) Unfortunately, the "repair disk" button is grayed.
5) So I runned repair Disk on "Macintosh HD" Core Storage Logical Volume Disk, which didn't give me any error.
6) I tried to boot my computer again but it still shuts down when trying to open my user.
7) Did all the same process again, but now the error is "Keys length incorrect" and repairing is now always blocked in the middle of the progress bar.
Is there any way I could extract the data I care about (photos, etc.) before erasing the disk or buying a new one?

There's hardware and software.
Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes). The directory that keep track of files is corrupt. Disk Utility can help determine if that is the issue. In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that. You have to boot from another drive. Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case. Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
In your situation it does sound serious and not just minor directory corruption. You can try erasing (formatting) the drive, You may need to do this if it is really corrupt, in which case there could be underlying physical issues. I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation). This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data. If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format. Then you know you need a new drive.

Keys out of order?

i think this is a command line question. i recently unplugged my B&W G3 so i could use the space to play with my new (to me) G4. i also "borrowed" some RAM from the G3 to install in the new machine. when i tried to hook up the G3 again, it would not load anything. i did the usual 'zap' and 'option' dance, which did finally bring the beast to life, but it would go to black screen where i would get "root". i know very little about Mac OS command line, so i didn't try to do anything there. i would type 'exit' which would give me a run down of the start-up POST and end in a "panic, stops here" line [sorry, not the exact term, but your get the idea].
so i put in the OS install disk (OS 10.4) and run the first aid utility to see whats up. i get a red line that reads "Keys out of order, needs repaired". what does that mean? i ended up erasing the hard drive and am now reinstalling the OS, but was wondering what mistake i may have made to crash the system in the first place.
Message was edited by: rtabish

The "keys out of order" message indicates your hard drive has file directory corruption. Disk Utility can't fix, but usually DiskWarrior can. I don't think the RAM removel/reinstall could have cauised this problem.
Besides using DiskWarrior, the only other option is to erase & reinstall the system which you have done.
 Cheers, Tom

Max no of overhead keys

Hi all
Can any one tell me what is the max no of over head keys that can be maintained in the product costing..
awaitng your answers
thanks and regards
gkk

Hi,
I don't think there is any limit on creation of overhead keys, but too many should not be created. It should meet the Business requirements.
Thanks
Murali.

Overhead key in network order

Similar Messages

Maybe you are looking for