OVERHEATING MESSAGE THEN BLANK SCREEN

There was an overheating message on a blank screen after leaving it in the car. After a brief moment the screen went blanl and it will not power on. It will not charge from the computer nor the wall outlet.

Oh well, looks like you are correct and static took it out.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • I received the following message while i was on my macbook air "you do not have enough space in your start up disk - you must delete some files"-restarted; only got startup noise then blank screen.  turned off tried to turn on no noise no screen load. thx

    i received the following message while i was on my macbook air "you do not have enough space in your start up disk - you must delete some files"-restarted; only got startup noise then blank screen. i waited for a few minutes to see if it would load - nothing just the lit up screen but nothing loaded - held power button it asked did i really want to turn off - i selected shutdown -turned off and left it off for awhile tried to turn on no noise no screen load. the same lit up screen but nothing loading.  please help thx in advance if anyone can offer some suggestions

    You can get there from here (booting normally); it just may take you a few steps to do it.
    If the disk is almost full and the system won't boot then sometimes it will boot in Safe Mode.
    http://support.apple.com/kb/HT1564?viewlocale=en_US
    Empty the trash after it boots.
    Then for hints on how to free disk/SSD storage see https://discussions.apple.com/thread/5872318?tstart=0
    If the Safe Mode boot does not do the trick then you can install OS X on an external hard disk, boot from that, and then delete files.  You can also reach the disk via Target Mode.  A third option is to take it to an Apple store where they can do a network boot and help you remove some files.

  • HT204400 Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen

    Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
    l have an apple tv  2 generation please help me

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • My Intensity II phone often receives texts as all symbols or group messages as blank screens. How can I convert these to readable texts?

    My Intensity II phone often receives texts as all symbols or group messages as blank screens. How can I convert these to readable texts?

        Intensity2user,
    Being able to read your texts is really important and we'll be happy to help you get them working correctly. How long has this issue been going on for? Has texting ever worked correctly for you?
    Also, when you receive texts as all symbols do you know what is contained in those texts? Are there any images in them by chance? Even a smily? If the person sending you the message tries to send it again are you able to read it?
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • BO4 - Select .unx says Loading - please Wait then blank screen

    Hi,
    As Administrator can create reports fine against .unv universes in WEBI.
    If select .unx screen does nothing.
    Just says loading please wait and blank screen.
    .unx imports fine in IDT.
    Any ideas?
    Thanks

    The icon, I believe is for the voicemail APP, Visual Voicemail, that carries a subscription charge - it is not the same as your *86 standard voicemail.
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=55911  shows the icon (is that what you are seeing?) and http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=56168 gives details on activating Visual Voicemail.  If yo uonly have standard voicemail, then : http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=55976 is how you access it.

  • ENVY 17-j005tx BIOS update then blank screen

    Hello All,
    After I shut down my laptop and turn it back on it prompted me to update bios which I did, I have completed and follow thecinstructions, after a few minutes it said its gonna restart and then I waited and waited but nothing is happening, I turned it back on and no screen is display at all (blank). No orange light on caps lock or what so ever. If some one help me with this would be great. I tried to restart and hold start windows button + B to no avail. Thanking you in advance.

    Hi Aslagot, sorry to hear that you are having issues with your computer not booting up for you. I would like very much to assist you with this issue. Could you please tell me what version of Windows your are using? Is it Windows xp, Vista ,7 or 8 (8.1)?  Once I have the information, I will then be able to narrow down the troubleshooting documents that we need.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Satellite C55-A initial startup then blank screen, no nav buttons

    We just opened and plugged in. Went through setup and entered password and display options. Got a msg explaining to move pointer to top right corner to activate nav options. After lettering machine run its initial start settings the screen remained black with the pointer. We tried several times to move the pointer to the nav options but the pointer just disapears off the screen. The pointer also disapears off the botthom of the screen too. R-click on the screen also does nothing. I can bring up task manager and there are processes runnning but we just can't do anything.

    I would return it to wherever it was bought for an exchange or refund.  You shouldn't have to fix a brand new machine.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Blank Screen / Custom message?

    Hello,
    Is there any way to do a customized message instead blank screen during remote control session? thank you.

    Jakub,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Battety problems - blank screen wit battery sign with red line

    I have the blackberry 8900 curve. Recently when I put my phone on charge it would turn my BB off and turn it self back on again. My battery was about 2% and I put it on charge and the phone turned off but when I looked at my phone the red light came on and then blank screen with a battery sign with a red line through it.
    I got some advice to take out battery, sim card and memory card. Which I did and my BB turned back on. However my battery was still dead so I put it back on charge and it turned off and since then my BB hasn't turned back in. I've left it on charge and nothing.
    Would really appreciate it if someone could help me out on this.
    K.sandhu

    Excellent advice! I just had the same thing happen to me and your post solution fixed my phone.

  • Dv6, Vista starts to HP Invent logo then blank

    The pc strarts to the point where the HP logo then blank screen.  Tried hard reset, external monitor, system check but still hangs up. I could do total recovery but want to save info on hard drive.

    zadoke wrote:
    The pc strarts to the point where the HP logo then blank screen.  Tried hard reset, external monitor, system check but still hangs up. I could do total recovery but want to save info on hard drive.
    Sounds like a video problem from the description. The only way to say your info on the HDD is to use a adapter to USB and use another computer to search your HDD and save your infomation before it is lost.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Apple logo, blank screen loop

    My phone is in an endless loop where it shows the apple logo then blank screen then apple logo, blank screen. I can only do this with it on the charger, it is a brick without it being on the charger. I am able to go into recovery mode but it has been awhile since I've backed up my phone, any ideas?
    iPhone 4
    iOS 7

    Hello Matthew Kentgen,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Have a nice day,
    Mario

  • ZEN: Blank screen after firmware upd

    I updated my 4GB ZEN to .0.05 firmware.
    It worked well for a few hours then it just went dark screen, not responding.
    I couldn't access the recovery mode and my computer won't detect it.
    When I reseted the player, the Creative logo came up and then blank screen, nothing.
    Flashing the firmware back to the older version is not an option (tried, my computer won't detect the player)
    Neither does the recovery tools (tried, same reason as above)
    So I guess the only option I have left is to go to the service center, right?

    if you read to other posts with the same problem you see what you need to do to fix it ..... but just for jou the last time??this is what i diid and it works :?To Fix any problems with broken firmware form attempted "playsforsure" firmware updates etc where your pc finds it as a 20mb dri've and it sits in recovery mode and does bugger all:
    (fix courtesty of cinderlee in creative forums)
    1. Uninstall all creative software & drivers
    2. Uninstall Media Player and Media Player runtime (will require a reboot for each thing). This is done by going to add/remove programs and uninstalling (this will put your pc back to wmp0).
    3. Re-install the Zen Driver from the creative website and reboot
    4, Plug Zen in.
    5, Make sure you have the firmware update ready, run it but don't click the language bit yet), leave the mouse hovering over your language selection.
    6. On the Zen- select "reload OS"
    7. As soon as it flashes up "reload new firmware now via USB" click the language button
    8. Tada, now the pc should find it and allow you to re-load the firmware. (it may take a few attempts)
    9. Once complete, click close and restart the pc. Everything should now be fine.
    0. once you are happy you can re-install WMP and it will work fine.
    Cheers!?thanks for ather forums that had bringed me the information

  • Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens .  Blank screen then apple sign for a short period then it buzzes and goes blank. When connected to mac  get message that phone is in recovery mode and that

    Hi  my iPhone 4 won't turn on . When plugged in on several different chargers the following happens .  Blank screen then apple sign for a short period then it buzzes and goes blank. Have tried power button and home button but no change ,When connected to mac  get message that phone is in recovery mode and that i must restore this phone before it can be used with iTunes . Is this my last resort as I have some photoessays I don't want to loose.
    PPlease help

    Hello, Chantal105
    Thank you for visiting Apple Support Communities. 
    If your device is in recovery mode you will need to restore the device. 
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Cheers,
    Jason H.

  • When I click on my Messages app I can see it for a brief moment and then the screen goes blank

    When I click on my Messages app I can see it for a brief moment and then the screen goes blank.  This happened to me last week and I Reset All Settings, which worked-but it has just happened again so that's not a long-term solution.

    Hello linslaf,
    It may help to force close the Messages app, then restart the device.
    iOS: Understanding multitasking
    http://support.apple.com/kb/HT4211
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the issue persists, the next step would be to restore your iiPhone.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • When I FaceTime friends in Tenerife, the video is on for a few seconds then their picture freezes followed by a blank screen with a Poor Connection message. When they Facetime back, the video is perfect. Has anybody any ideas?

    When I FaceTime friends in Tenerife, the video is on for a few seconds then their picture freezes followed by a blank screen with a Poor Connection message. When they Facetime back, the video is perfect. Has anybody any ideas?

    I had this same thing happen to me.  I was using my brand new iphone 5 (texting and listening to music through the speakers) when it flashed the apple logo, stopped my music and brought me to the lock screen. 

Maybe you are looking for