Overlap audio regions on 1 track without cutting the previous one off

Im trying to overlap multiple audio regions on one track, so that the next one starts before the previous one ends but when i do this, each consecutive overlap basically replaces the remaining region of the one before it. to be more specific in order to maybe paint a better picture of what i am asking... i am creating machine gun audio for a video clip and i have a loop of a single shot plus the shell falling to the ground. im trying to overlap the loops so that the single shot of each come together in rapid fire succession to create the machine gun firing sound, but i want the sound of the shell falling for each shot to continue to play under the multiple copies of the overlapping loop. the problem is, when i overlap multiple loops, its not finishing the noise of the shell falling to the ground for each shot, it only plays the falling shell at the very end when there is no other overlap. i hope i did an ok job explaining what i am asking, haha trying to type this out was much more difficult that initially anticipated. thanks in advance for any help.

That's normal. Audio tracks are not polyphonic. Use several tracks or EXS24.
Christian

Similar Messages

  • But how do I create a new iTunes backup password without knowing the previous one?

    In case anyone keeps track of such things, I'm among those folks who really doesn't recall ever being asked to create an iTunes backup password, but that's irrelevant to my question.
    I'm not in any bind. I don't need my backup files to restore anything. I will shed no tears as they are moved to the Recycle Bin (indeed, I will gladly do the deed myself).
    That said, it appears impossible to create a new backup password without knowing the previous one.
    If the only "solution" is to wipe my iPhone's memory and start from scratch, I will be a sad camper.
    Any help? Are backups to iCloud encrypted?
    Cheers...

    Additionally:
    Be super critical & meticulous (and whatever other synonym I missed) when you get a new password:
    Write it onto your bedroom wall, or someplace off of a computer that you will always find.
    If you active 2-step verification, the key is VERY important. Lose it & you may be toast.
    If you don’t 2 step verify, & use the Security Question instead --> do not lose, or forget the answers.
    Very nearly the same outcome!!!!!:  Bad experience.
    If you add a 2nd email address, make sure its a RESCUE address not just an alternate address.
    If you lose these, you lose access to your 3rd party purchases via Appstore for future upgrade. That will make you VEWY, VEWY UNHAPPY. Apple new OS versions do update, but add a new device & likely you will be unable to use your content on that device. It will never load if the ID locks up.

  • Opening a file without hearing the previous one....

    How do we do to open a file without hearing the previous one if we open multiples files in a short time without willing to close the previous one each time ??

    How do we do to open a file without hearing the previous one if we open multiples files in a short time without willing to close the previous one each time ??
    If you don't wish to listen to all playing videos and it is too much trouble to stop or close non-foremost player windows, then don't use the QT X (or any similar) media player for playback. (I.e., this is what they are programmed to do.) Instead, use a media player like QT 7 which has a user preference that can be set so that only the "foremost" player window audio is heard when multiple videos are being played simultaneously.

  • How to activate a new release Strategy Of PR without deleting the previous one?

    Dear  All,
    1=I have a release strategy in purchase requisition which is without classification and active in system.
    2= Now i configured a New Release Strategy for Purchase requisition   which is with classification
    My question is i want to activate the New one with classification  in System without deleting the previous one.
    Should it possible? and How?
    Ritesh.

    Dear  Dev,
    My old release strategy at item level.
    But  the New one  is at header Level.
    But the previous  one  showing  the release Indicator.
    But  when i delete  the old configuration the old release indicator vanishes.
    But the thing is  in Pr with out classification we have same Pr doc.Type
    But in New Configuration We want to at header level  and with same doc   type.
    so without  deleting  the old one if i activate the New Strategy whether the system allow me
    to see the New Release Indicator?
    As  My testing when i deleted the old one the Old indicator in Line item Level vanishes.

  • Processing Overlapping Audio Regions - Bussing - Organising Tracks

    Hi.
    When i have overlapping regions such as multiple vocal parts that i want to all sound the same, the logical thing is to bus them and apply effects there. My session becomes very confusing and im not sure whats going where. Is there anyway of colouring the tracks or something like that that would help you see what tracks are being processed together?
    Has anyone got any good advice/tips?
    Thanks, Ben

    Do you colour the regions and the tracks the same????
    Yes.
    I use the enviroment for my mixing. Can you colour tracks/objects in the environment window?
    Don't know - not in front of Logic right now, but I don't think so - I use the track mixer so I've never tried.
    You cant see the colour dots on the tracks which tells you which colour the tracks is,
    You can if you select 'track colors' from the 'View' mini menu in the arrange page.
    How do you work with colour? Are you tracks coloured before you start (in your template) or do you colour everything as you go along?
    Both. In my autoload I have basic colors set up - multi-channel drums, for example - all the same color, but I use slightly different shades for the bus and aux tracks I might have associated with the drums, and group them together.
    But as the song moves forward, I'll group and colour associated tracks together - for example, guitar parts, that I couldn't anticipate in the template.
    In your vocals example, I usually have them all in various shades of red, again grouped together with their bus and aux tracks.
    i get frustrated and confused very easily with lots and lots of tracks going to different places and doing different things....
    You might rethink your comping so that your tracks are cleaned up more - although I find using colors very useful, so I can quickly see where I need to go to make changes, I try to edit tracks down first by making edit decisions early so I'm not dealing with unnecessary tracks of the same part.

  • Multiple signatures in a PDF - without invalidating the previous ones

    Hello dear forum
    I have created a PDF form with several fields (with LiveCycle Designer 8.0). This form should be signed by two different people, thus I have set up two signature fields. However, when the second guy signs, the first siganture becomes invalid - which is not good.
    I have looked through all kinds of tutorials and such but cannot find the right way to avoid this issue....
    Any hints?
    Thanks a lot in advance!
        Jens

    Read this:
    http://www.adobe.com/devnet/livecycle/articles/multiple_sigs_tip.html

  • HT1711 how do i add music without deleting the previous one installed

    I want to add some songs to an ipod nano which has been synced on another computer, but I dont want to delete the songs already there, how can I do that?

    Click here and follow the instructions.
    (79662)

  • Overlapping audio regions

    Hello
    Im still getting the hang of logic x here
    I have a quick question
    when I overlap an audio region on to another audio region on the same or a different track
    it is trimmed in size if I move the overlapped region again
    In my previous logic setups this was not the case. the original overlapped audio region would stay the same size and length underneath when I moved the region I put on top of it.
    does anyone know how I can change this back?
    Ive tried help search and couldn't find my answer.
    thanks kindly;)

    Glad you got it sorted but if you write how you got it sorted it could well help another user facing the same situation.

  • How to copy with the marquee tool without cutting the region?

    I know this has been discussed but I cannot find the thread unfortunately.
    How can I copy parts of a region with the marquee tool without cutting the region??
    Thanks for help Eddie

    How about having the Pointer Tool set as your main tool and setting the Marquee Tool as your "Command tool" (i.e., the one that shows up by pressing the Command Key).
    Then you can hold down the Command key, make your Marquee selection, let go of the Command key and your back to the pointer, then Option-Drag the selection to a new location.
    From the LP7 Reference (pp.16-17):
    "When editing objects graphically, you always have two tools available at the mouse pointer position: one is already active, the other is activated by holding down Command. ... To assign a tool to Command, click on the desired tool in the Toolbox, with Command depressed."
    Hope this helps,
    Mitch

  • How to delete a word mistake in a vocal track without deleting the whole track

    How to delete a work mistake in a vocal track without deleting the whole track

    jon w. (nichimyoun) wrote:
    How to delete a work mistake in a vocal track without deleting the whole track
    http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?

    Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?
    In other words, because the MacBook Air only has 120 gbs of hard drive space & my old hard drive, from a Lenovo, has 500 gbs of hard drive space (and I have over 120 gbs of music), I’m looking to manage my iTunes music from the external hard drive permanently. Upon attempting to access the iTunes library held on the external hard drive the following message comes up: “The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file”.  Is there a way to get around this?
    Any advice would be greatly appreciated, thanks so much!

    You will have to engage a split library which means you will have to start answering questions on this forum because you will need to learn a lot about how iTunes works in order not that have a big mess at the end of it all.  It also won't be easy when the time comes to relocate it all to different drives.
    You can go to advanced preferences and turn off organize media and copy to items to media folder when adding items to library.  Next read about how to selectively consolidate items to the external drive.
    Sept. 2010, Consolidate selected content - https://discussions.apple.com/thread/2589812 and April 2014, https://discussions.apple.com/message/25414357
    "...selected the new tracks directly in iTunes, Control-clicked on the selection, and saw that now you can consolidate selected items." - http://hints.macworld.com/article.php?story=20090919000326840
    Remember that when you start iTunes without the external drive turned on iTunes will present you with a bunch of broken links.  If you have automatic downloads enabled with iCloud you may have to turn that off to prevent iTunes from repopulating your drive trying to deal with those "missing" tracks.
    If you add tracks in bunches to iTunes and want them to go to different media folders you will need to either add them by holding down the option key while dragging if the desired media folder is not the one set in preferences, or by changing the media folder in preferences.  Changing media folder preferences only applies to new files added, not old ones.
    Okay, I am going to stop typing because you might just reply to me, "Oh, okay, forget it," and I don't need the exercise.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391

  • How do i change the apple id in icloud without deleting the old one?

    i was given a second hand iphone 4 still logged into the previous owners apple id account. I changed the apple id connected to the itunes and app store to mine but i cant seem to be able to change the one connected to the icloud without deleting the previous owners account which i do not want to do becasue that apple id is still in use. how do i change the id without actually deleting the one currently logged in?

    Welcome to the Apple community wensecles.
    Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

  • Can I sign in with multiple apple IDs in a single apple device without deleting my previous one?

    can I sign in with multiple apple IDs in a single apple device without deleting my previous one?

    Hi swagyoloswag,
    Welcome to the Apple Support Communities!
    There are several different services that require signing into an Apple ID to use on your iOS device. You can sign into different Apple IDs for different services on your iPhone. For example, Apple ID #1 for iCloud and Apple ID #2 for iTunes & App Store. You cannot sign into the same service with two different Apple IDs at the same time. The attached article has a list of services that are accessible with your Apple ID. 
    Where can I use my Apple ID? - Apple Support
    Cheers,
    Joe

  • I returned my old ipod and ordered a new one a few days ago and i was never given a tracking number for the new one that is being shipped

    i returned my old ipod and ordered a new one a few days ago and i was never given a tracking number for the new one that is being shipped

    Go to the Apple Store webpage and in the upper right go to Account and select Track an Order. There you will find the status of your order. You only get a tracking order when the items ships.

  • I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

Maybe you are looking for