Overlap between Logic Pro 7.2 / 8 Loops?

What overlap (if any) exists between the loops included in Logic Pro 7.2 and 8? My poor laptop is getting space constrained (has Final Cut Studio 2 as well), and I'm wondering how much I will lose by completely trashing my Logic Pro 7 install.

Hi,
I am running Logic Pro with a Digi002 Rack.My driver versions are:
Digi Core Audio manager 7.1.1cs1
ProTools LE v7.1.1cs1 also the first Intel compatible version of ProToolsLE.
Logic Pro 7.2.2
All of this works,and I even use the Digi002 also to playback audio from iTunes,iMovieHD,iDVD,and Quicktime Pro,without any problems at all.
Are you able to run ProToolsLE well,or is it exhibiting the same problems?
Are you using the internal drive as a record drive,or do you have an external firewire drive for audio? This is important.I would recommend NEVER using the internal drive for recording audio,it can make the drive unusable after a while.
It would be good to know if you do have the latest drivers for the Digi002,and are able to run iTunes etc... If that is the case then going and removing all of Logic Pro preference files,and re-selecting the Digi002 interface as the audio hardware might do the trick.Also,check Audio Midi setup and make sure it sees the Digi002 correctly.
Lastly,and this suggestion no one seems to give...is simply this:check ALL your firewire cables,and if they look even a little frayed,replace them.Also,please put the Digi002 in the following order,if you are daisy chaining multiple firewire devices:
MacBook Pro
\Digi002 Rack
\\firewire hard drive(s)
\\\any external DVD/CDburners,ESPECIALLY if the manufacturer recommends this position for heir device.
\\\\any other external devices(cameras,printers,whatever)and have them OFF when running Logic or ProTools.
I hope some of this helps,
Cheers,
Nick

Similar Messages

Conflict between Logic pro 7.2.2 and DIGI002 using a macbook pro

Hi.
I'm running Logic pro 7.2.2 on a macbook Pro using a DIGI002 rack as audio interface. I experience an extremely bad performance from my computer and keep getting these warnings: "conflict between Logic Pro and external device (digi002)" and the application runs VERY slow! I have updated all drivers but that hasn't helped! I practically can't use Logic at all, as it complaints when hardly running any tracks in a session. Has anybody experinced or heard of it before? It has really started to get on my nerves!!!!

Hi,
I am running Logic Pro with a Digi002 Rack.My driver versions are:
Digi Core Audio manager 7.1.1cs1
ProTools LE v7.1.1cs1 also the first Intel compatible version of ProToolsLE.
Logic Pro 7.2.2
All of this works,and I even use the Digi002 also to playback audio from iTunes,iMovieHD,iDVD,and Quicktime Pro,without any problems at all.
Are you able to run ProToolsLE well,or is it exhibiting the same problems?
Are you using the internal drive as a record drive,or do you have an external firewire drive for audio? This is important.I would recommend NEVER using the internal drive for recording audio,it can make the drive unusable after a while.
It would be good to know if you do have the latest drivers for the Digi002,and are able to run iTunes etc... If that is the case then going and removing all of Logic Pro preference files,and re-selecting the Digi002 interface as the audio hardware might do the trick.Also,check Audio Midi setup and make sure it sees the Digi002 correctly.
Lastly,and this suggestion no one seems to give...is simply this:check ALL your firewire cables,and if they look even a little frayed,replace them.Also,please put the Digi002 in the following order,if you are daisy chaining multiple firewire devices:
MacBook Pro
\Digi002 Rack
\\firewire hard drive(s)
\\\any external DVD/CDburners,ESPECIALLY if the manufacturer recommends this position for heir device.
\\\\any other external devices(cameras,printers,whatever)and have them OFF when running Logic or ProTools.
I hope some of this helps,
Cheers,
Nick

Conflict between Logic Pro and external device error in Logic Pro X./cpu problems

hi Logic users,
using a MacBookPro 15 inch Retina, 2,7 GHz intel Core i7, 16 GB Ram, OSX 10,8,5, Logic X 10.0.4.
i am wondering if you can help me out with the following problem i cant solve:
when starting logic x with a not too big arrangement, lets say using one third to half of cpu, i open u-he plugin Diva and the cpu is going up on full range and the following error appears: "sample-rate 39299 (number always changes) reconized. Check conflict between logic pro x and external device"
as external device im running a VirusTi and as audio-device Apogge Duet. when dis-connecting both devices, i have the same problem.
putting the sample buffer up to the highest rate, doesnt change anything.
same arrangements on friends computers dont show that problem, so it has to be something wrong in my set up.
anybody has an idea?
would be much appreciated for your help,
thanx-

Have you used Diva's preset Accuracy system to reduce CPU load?
accuracy
Click on the Main button at the bottom of the window. To the right of the Master section are two selectors called Accuracy and OfflineAcc. In the current version of Diva these are global parameters i.e. they remain fixed across all presets, per loaded instance:
draft........CPU-friendly, but FM will sound rough and resonance is primitive i.e. NOT zero delay! fast......... Fine for older computers and/or when you need more polyphony in acceptable quality great...... The best compromise between quality and polyphony on high-power computers divine..... Top-quality zero delay feedback filters... but can your computer can handle it?
OfflineAcc only has two options – same or best (i.e. divine in the current version).
Some host applications may have problems rendering to audio at the selected accuracy, but the
better ones include an “inform plug-ins of offline rendering status” or similar.
I typically work in draft mode and then switch to Devine or best when freezing the track or bouncing the entire project...

Difference between logic pro 7 and 8

I'm just wondering if there's a difference between the Logic Studio ($500), and Logic Pro 8..or does Logic Pro 8 simply come within the Logic Studio package? Is there a big difference between Logic Pro 7 and 8? Also, is it worth the $200 upgrade?

Hi,
Logic Studio: Logic Pro 8, Soundtrack Pro and MainStage.
So yes, Logic Pro 8 is part of the 'Logic Studio' package, which also contains the two other apps.
http://www.apple.com/logicstudio/
Take a look at the Logic Pro 8/Logic Studio forum. There are mixed opinions on whether it is worth upgrading yet or not.
Good Luck!
Steve

Does Apple allow functionality between Logic Pro and Airport Express

That's it... Does Apple allow functionality between Logic Pro and Airport Express.
If not, Why not. It seems like such a logical Apple type solution. I looked and find it difficult to believe nobody has asked the question...

There is your solution: http://www.rogueamoeba.com/airfoil/

Is there a difference between Logic Pro and Logic Pro X?

Maybe this is a stupid question, but is there a difference between Logic Pro and Logic Pro X?
Already thx!

Hi
Short answer: No
Longer answer:
Logic Pro X is the latest release version of the DAw known as "Logic Pro". Previous versions were: Logic Pro 9, Logic Pro 8 etc.
There was also a "Logic Express" (no longer available) which, though similar to Logic Pro, was missing a few features of Logic Pro in it's later versions)
This might add more details:
http://en.wikipedia.org/wiki/Logic_Pro
CCT
edit
AoS wrote similarly
There you go then :-)

Difference between Logic Pro 9 and Logic Studio?

I have garage band and I notice that the instruments available are extremely limited, so I am looking to upgrade solely for the idea of getting more instruments and more features. Does the app store Logic Pro 9 have the extensive amount of official instruments to download for free? Or are there additional costs if you are looking to purchase the instruments for the app store logic 9?
I know that the studio version has mainstage, compressor and other programs etc, but what I am looking to find out is if there is a difference between what instruments, resources and materials found in the $210 Logic 9 and the Logic Studio version that you can't download for free from inside Logic 9?
Thanks

Hi
Segall wrote:
Does the app store Logic Pro 9 have the extensive amount of official instruments to download for free?
The instruments themselves are embedded within the Logic application, with the exception of the sample libraries for the EXS24 and Ultrabeat. All of the content, including the various Jampacks and sample libraries are available to download
Segall wrote:
Or are there additional costs if you are looking to purchase the instruments for the app store logic 9?
No.... free
Segall wrote:
I know that the studio version has mainstage, compressor and other programs etc, but what I am looking to find out is if there is a difference between what instruments, resources and materials found in the $210 Logic 9 and the Logic Studio version that you can't download for free from inside Logic 9?
The "Studio" DVD's include the now defunct Soundtrack Pro, which had around 20G of loops, beds and sound FX. Some of that material is now available for Final Cut X.
A few utility programs are also missing (Waveburner etc).
CCT

Sync between logic pro 7 and mpc 2500

hello all. i am having a problem with my production set-up. i have synced logic pro 7 with my mpc 2500 (mpc as slave). the main problem is that logic is triggering a drum on the mpc when i press record. basically, the drum plays along with the click at all times. the only thing that stops this is turning of the drum kit, which of course makes it where i can't play it. i also have a problem with the mpc responding when i press play in logic. can someone please help me?

If you have set everything up correctly, the MPC should send a signal into the computer. To trigger sounds you set up a MIDI track and select 1A. Then open the plug-in/sound source and load a patch onto midi channel one. You will then hear the sounds when you hit the pads. Its exactly the same as setting up a keyboard, except now when you hit record on the MPC you can record the midi data and create loops. V Useful!!!

Connection problems between logic Pro X and Mackie MCU PRO

Hello, I need help.
I bought a mackie MCU control PRO and don´t work on my Logic Pro x. Does anyone know if I have to do something in the logic to configure? or should it automatically go?
Thanks for your help
This is my equipment list if you have any questions;
MAc Book Pro, Maverik IOX
Motu Ultralite
Mackie MCU PRO
Logic Pro X

Not enough information to help you.

Are there compatibility issues between Logic Pro 9 and Mavericks?

As the marker passes over the Arrange-window (when playing or recording) it leaves the space behind it black. Does anybody know why this happens and how to deal with it? I haven't yet had any other problems (besides the usual loss of some EXS-samples.

Only Logic Pro 9.1.8 is officially supported under Mavericks. So: update!

Difference between Logic Pro and Logic Express?

A buddy wants me to show him how to use Logic Express. I'm fairly up on Logic Pro, have used it for years. I'm wondering if I can get a trial version of Express to try out for an hour before embarrassing myself in front of him?
Or if there is a huge amount of difference in the basic setup?

There is very little difference, mostly in content (Jampacks, Waveburner, Mainstage..and a few of the high end plugins). Other than that they're functionally identical. same audio engine, you wouldn't know the difference just by looking at them.
pancenter-

Swapping songs between Logic Pro and Express-incompatibility?

We have a bunch of audio tracks that we recorded on Logic Pro 7.1. A musician has Logic express and wants to use the tracks and over dub and then send them back. When we brought the portable drive over, all the songs loaded fine minus plug ins not available. When we hit play though, the CPU overloads on the G5 with Express. We transfered all the songs to the computers hard drive so not to rely on the firewire. Also, it has 2 G of RAM for the processor. If we build the tracks up from the bottom, dragging each audio track in one at a time, then it works. This is a hassle though since it make collaboration tough. Any thoughts on why we are having incompatability issues?
Dual G5 2.5 2gRAM Mac OS X (10.3.9)

There is very little difference, mostly in content (Jampacks, Waveburner, Mainstage..and a few of the high end plugins). Other than that they're functionally identical. same audio engine, you wouldn't know the difference just by looking at them.
pancenter-

Synchronization problems between Logic Pro 8 and Roland's groovebox MC-909

Hi everybody,
I recently purchased a (used) Roland MC-909 and tried to synchronize it with Logic but the whole procedure seems too complicated.
Logic gets digital audio input (S/PDIF-RCA) from the MC-909 (through M-audio Fast Track Pro) and I've tried all shorts of adjustments (e.g. connecting Logic's MIDI out (through M-audio Fast Track Pro) to Roland's MIDI in port and the opposite with different master/slave setups etc.).
I can't get these two to synchronize.I suppose there is a logical solution for everything,but I'm really running out of patience...
I want to use Logic Studio to internally record Roland's (synchronized!!) audio output,avoiding sampling patterns from Roland and then transferring them to Logic (import audio file).After that,I would like to use these two combined in a live set.
I hope there are people out there having faced similar problems in the past...share any bit of useful info please..
Thanks everybody!
Mario,Greece

MIDI Out from Logic via the M-Audio interface.
In Logic's synchronization setup, be sure "Transmit MIDI Clock" is enabled and the port is selected.
In the Roland, set clock to external/slave, you may have to press play, the unit should now wait for, and sync to MIDI clock from Logic.
caveat... I don't have a Roland unit, but this way ---should--- (hate that word) work.
pancenter-

What is the big differences between logic pro 9 and logic express 9

Just trying to decide what would be a beter buy.

Hi,
Have a look Here for the Comparison Features...
http://support.apple.com/kb/HT4229
If price is not the issue... Then Logic Studio is the way to go...
Up to you..
Cheers,

Logic pro 9 loops dissapeared

After i installed logic pro 9 and the loops ( some still says incomplete) i got a window that i should wright in my apple pass and all my loops turned grey and i cant get them back. I have the loops on the computer but i cant get them into logic. I have also tried to install the loop packages one by one but it still doesnt work what can i do?

Welcome to the Support Communities.
Broke-N wrote:
...but if your running an older machine...
Source: How to Use You're and Your

Overlap between Logic Pro 7.2 / 8 Loops?

Similar Messages

Maybe you are looking for