Overlap to objects, both black, but in the overlapping region color is white

This has bot to be possible, but for some reason my brain just ain't working.
I've got to black objects, let's say circles, they overlap. IN the overlapped portion I want my color to be white, is that possible?

The basic idea is based on the fact that black is white and white is black.
So, do the following:
1. New document
2. On Layer 1, draw a grey filled rectangle
3. Create a new layer above Layer 1
4. On Layer 2, draw two white filled circles
5. Target Layer 2 (click the circle on the right handside of the Layer's name)
6. In the Appearance Palette, add a new black fill to Layer 2
7. While this new fill is highlighted in the Appearance Palette, go to Effect > Pathfinder > Exclude
8. Now, create any calligraphic brush and apply it to a white stroke which you have drawn on Layer 2, overlapping the white, no the black circles.

Similar Messages

Spot colors Black, All have the same alternate color values

If printer’s mark [Crop, Registration, Page] is enable in the InDesign preset options, we are getting “Spot colors Black, All have the same alternate color values” error in the PITSTOP log report.

Rob, here's screenshot of Acrobats Output Preview Object Inspector. You can download my PDF here - //www.fileswap.com/dl/Q1CzzOzEqt/
I'm not sure if CM was assigned to document when created or afterwards. In Color Settings preferences is stated Fogra 39 (if it matters - document was meanwhile saved and opened...). Are there other options to assign workspace to exsisting document?
Peter, this is not the case. Placed image has embeded same color profile as is working space of document in ID. I tried the same with sRGB image placed in same ID document and compared it to PS but color shift (greenish) is present - it looks exactly the same.
Guys, I can't tell you how happy I am to have you help me with this terrible and nerve-wracking problem.

When I select a menu item, the highlight is light blue and the item font color goes white. It is very difficult to read? Any solution?

When I select Bookmarks, the menu item (Bookmarks) is highlighted in light gray color; and the letters of the work itself (Bookmarks) turns white. This same thing happens when you go into individual bookmark selections. It is very difficult to read. Are there any alternatives that can be set by the user?

Are you using a standard Windows theme?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

HT1208 After updating my iphone 5C, the screen was black but had the itune logo in the center, a white arrow pointing to the logo, and what seemed like a white lock, but it had a long white line leading to the bottom of phone. Phone is now frozen. What

After adding the latest update to my 5c iphone, the screen was black, with the itune logo in the center, a white arrow below it point to the logo, and below that, what seemed to be a white lock, but it had a long white line reaching the bottom of the screen. I can't get the phone to start. The white apple appears and then I get the same logo, arrow, etc. What can I do to fix this? Thanks for any assistance.

i m also put passcode in my iphone...but i dont know that how i know that my passcode is crack by someone???and same as police is not interested to find out it..
i want ma iphone backkk...........

LR5 - Can the PNG background color of white be changed?

I recently decided to use LR to catalog all my images (instead of Bridge). I love that PNG is now supported. Ran into one problem...all the snowflake and white frame images are viewed as a white rectangle due to the background white. I know Preview and other "viewers" don't have this issue. ACDSee has a setting to change the background. Can I do this in LR5? If not, is there a link where I can submit for a product enhancement to the Product Management team for a future release of LR?

I had seen that post before I came here...where Julianne suggested people come. Unfortunetly, neither watermark nor identity plate are what I need. I have thousands of PNG files, and while all are not "white images" on LRs assigned white background for PNG files enough are that I made the above request. From your answer, and Julianne Kost's it sounds as if the white background for the PNG cannot be changed as a preference - to view these PNG files in Library Mode.
Does anyone know the process, or have a link, to make a request for improvement to the products....

White on Black without inversing the whole screen

Is it possible to have the windows be White on Black without having the whole screen inverse?
White on Black is easier for Gramma to read but she doesn't like the fact that it makes her background negative. There must be a way, I just can't see it.

By 'background' you mean the desktop picture? Find it in (hard disk)>Library>Desktop Pictures and use an image editor to invert it, save the result and choose it as your picture. Of course icons etc. will still come out negative.

Is SpeedGrade compatible with the Euphonix MC Color Board?

As far as I can tell, SpeedGrade is compatible with Tangent Devices, but not the Euphonix MC Color board. Is this correct?

Yes, this is correct.
It you want support please file a request here:
www.adobe.com/go/wish

Use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... An

Hi...
My name is Turgay and have been using computer since 1982... 2 years ago, because of my friend's advice, i bought an iMac... It was the first Mac that i use... Till that, i was using normal PC's...
I bought an 24" iMac on July 2009 and started to use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... And it increased. Because of this i took my iMac to your authorised distributor http://www.bilkom.com.tr...
They changed my screen but in 2 months it happened 3 times and i wanted them to change my iMac with new one, under customer laws... In our country, the device must be changed with new one if the same problem occurs in 3 months. Because i know the customer satisfaction of Apple, i didn' worry about it but Bilkom refused my will... I spoke with them for 2 months but nothing happened, they just told me, it' not our problem.
Because of this speech, i sued them on June 2011... Last week, i won the case but just for the return of invoince... It costs 3.200 Turkish Liras (1.800$) and there's no 24" iMac unused... Bilkom again refused to give me an iMac... I thought that Apple's customer satisfaction can't be like this... I didn't write anything to Apple till now but if i can't get an iMac, i must return to normal PC after 2 years... And i don't want that... I offered an iMac 27" with core i7... No matter Bilkom accepts or not, they don't care of me... I'm a customer, they should do... I've never seen such a like company. I hope the real Apple will help my problem and save me from Bilkom...
Waiting for your reply... Thanks and regards...
Turgay Kala
General Manager

Unfortunately, you are not communicating with Apple here - we are all other users volunteering our time to help with technical problems.
Here is a list of Apple contacts; there is no email address - you will need to write a letter to their corporate headquarters or call them:
http://www.apple.com/contact/
Although, it appears that your problem is with a third party store and that you have won in court - did you get your money back? 24" iMacs have not been made since 2009 or 2010. Now there are 21" and 27" iMacs.

HT5654 my iphone 5 fell did not break but went completely black and non responsive. When I plug it to the computer I get a white screen with black apple. When I push both the Top and Homne buttons simultaneously I get the charger picture plug end plus arr

my i phone 5 was dropped, didn't break but went completerly black screen and nonresponsive. I pushed both the home button and top button no response. I plugged it to the computer it gave me white screen with black apple. I pushed the home and the top went black then gave the itune and the charging plug picture. I tried to download and update, the message came as couldn't restore due to unknow error. Any help??

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Hello. I dropped my ipad first gen from my chair, about 2 feet above the floor. The screen went black and I can't turn it on again. I have tried holding both buttons down at the same time, but nothing happens. Any help?

Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?

You will probably have to contact Apple for repair but before you do try this:
Turn your iPad upside down on your lap and give it a hard smack on the back.

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

C4650 Will only print black from the internet. MS Word and PS will not print in black but has color.

Before you think I just haven't tried anything, let me run you down with the whole lot:
-HP PhotoSmart C4650
-Windows Vista
-Problem: My printer won't print in black --but-- this only goes for Microsoft applications it seems. If I have a page of text in black, when printing from MS Word, the page comes out blank, however the printer is actually "printing" back and forth. IF, however I print from my browser, from email, or a webpage, picture, google docs, etc, black prints *just fine.* So far this holds true for both MS Word and PhotoShop CS5. Issue: Black ink simply doesn't print from any program other than a browser.
-NO. The cartridge isn't empty. NO. It's not incompatible. NO. The cartridge head isn't dry and I am not going to soak it in water. This is a new cartridge. It's the official HP brand.
I've done a search and I've found that a few people seem to have this "only print from the internet" problem, however none of these was solved. The only advice that an HP support member gave to one of them is to "install XP service pack 2" however.. I am not running XP. A few other people get the opposite issue where they can only print color from the internet and not from the computer's applications.
I don't know much about printers but it sounds like some kind of driver issue. Yes. I've already searched for, uninstalled and reinstalled drivers. Whenever I have to print something, I now try to open it up in my firefox just so I can be able to print black. It's quite the hassle. Almost seems like some kind of ploy to cause people to buy new ink cartridges when it's not really empty.
-Yes, I have also uninstalled and reinstalled the printer.
-Updated my windows (although idk how that would help. But I know it's going to be a suggestion anyway.)
Is there any known fix or should i chuck it off the balcony and go get a lexmark?

Hi lisaloyd,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having issues printing in colour. I also see that you are using a Lexmark printer. I would advise you to get into contact with Lexmark so that they can show you how to navigate through the printing software that they provide.
Please click on the following link to get to Lexmark Support.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

The main screen of my macbook is black, but the secondary screen it's ok. how can I fix this problem?

My MacBook was working with 2 screens but, when the secondary screen was disconnected, the main screen put in black and I can't fix it

Take your Mac to an Apple store to be looked at and fixed. There is nothing you can do to fix it. It is a hardware problem. Either the screen has failed or the cable going from the logic board to the screen has failed. For both of those type failures only Apple, or a AARC, can fix it.

Hello, i'm creating a very simple animation in ps cs5, but when I try to transform a smart object in a frame, all the frames are affected by it. What can I do ? Thanks, Ep

Hello, i'm creating a very simple animation in ps cs5, but when I try to transform a smart object in a frame, all the frames are affected by it. What can I do ? Thanks, Ep

Ok, you are in frame animation mode. I thought cs5 had a timeline mode, but now I think I was wrong.
In frame animation mode what you do is in one frame you have the object rotated in one position, then select an other frame and rotate it. If it rotates the first frame, which I think it will. Create duplicate of the object in a new layer. Then rotate the second layer.
At this point in my example you would have two layers, one of which has a rotated object.
Clear the frames
Convert the two layers to frames.
You now have two frames, one for each layer.
Select both frames then click the tween button.
This will create the in between frames.
In the tween dialog box the higher the number of frames set here, will create a smoother animation but will result in a longer time frame for the animation to play.
Because Photoshop has no way of knowing which way the object should rotate, it is feasible for it to rotate the opposite direction or could look wonky. Just undo and add an in between layer showing how it should look in the middle, then continue on.
So your layers should be the following, a frame that shows all objects in their rest state.
All objects that remain in a rest state must be copied to the next layer (ctrl-j on Windows or cmd-j on Mac)
All subsequent layers are then used for rotating a duplicate of the object. (Ctrl j or cmd j)
You will find the commands to clear the frames, convert layers to frames and tweeting in the hidden menu found when you click the small icon in the upper right hand corner of the animation panel.

When watching a program or film, the video will go black, but the audio will keep playimg. The only way to get picture back is to turn the tv off then on.

When watching a program or film, the video will suddenly fo black, but the audio will keep playing. The only way to get picture back is to turn the tv off then on. Whats going on?

Welcome to the Apple Community.
Check that the HDMI cable is correctly seated at both ends.
Try disconnecting the cable and connecting it again.
Try another HDMI cable.
Make sure your TV supports 720p (Apple TV 2)
Try the Apple TV with another TV

Overlap to objects, both black, but in the overlapping region color is white

Similar Messages

Maybe you are looking for