Overlap white box on black bottom of 16x9

video is 16x9. I put "comments" - like a note..almost like subtitle. I want to use white box with subtitle below the video line (on black part). It can't be below the line of 16x9 where the black is. I saw someone did that. I wonder how that person did. I hope you understand what I mean.

It sounds like you mean something like this...
Am I right?
MacBook Pro, Dual Core 2.16   Mac OS X (10.4.8)   Keyboard protected with leather

Similar Messages

  • Annoying white box on black background

    My HTML page has a black
    background.
    My SWF menu has a black background
    from the very first frame.
    When the page loads, the area size of
    the SWF is white over the background until the SWF starts
    loading.
    Is there any way around this? It would be nice if the web
    visitor didn't see the white box. The animation would have a much
    nicer effect.
    I appreciate any help or suggestions! Thanks.

    intwo wrote:
    >
    My HTML page has a black
    background.
    >
    My SWF menu has a black background
    from the very first frame.
    >
    When the page loads, the area size of
    the SWF is white over the
    > background until the SWF starts loading.
    google arcihves for "white background" and you will find tons
    of posts
    explaining why is it happening and how to fix it.
    Archives:
    http://groups.google.com/advanced_group_search?q=group:macromedia.flash.*&hl=en&lr=&ie=UTF -8
    Check my reply to very same topic:
    http://groups.google.com/group/macromedia.flash/browse_thread/thread/36abcd707de40d85/6ad7 4971f4ceaeb9?lnk=st&q=&rnum=4&hl=en#6ad74971f4ceaeb9
    Best Regards
    Urami
    Beauty is in the eye of the beer holder...
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • When I roll over each link on a web page, the url appears in a white box at the bottom of the browser window. How do I stop this annoying thing?

    I am using a Mac. OS 10.6.3

    The easiest way is to use the Status-4-Evar add-on. With it you can choose to not display any of the status messages or URL hover previews, or display them in the add-ons bar or location bar instead.
    https://addons.mozilla.org/firefox/addon/status-4-evar

  • How can I turn off Recently Websites when opening new Safari window? After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed.

    How can I turn off Recently Visited Websites when opening new Safari window?
    After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed. How can I turn this function off? I do NOT want my new Safari windows to have history displayed of previous websites I visited. I only want my Favorites (on the top) to be displayed. Please help.
    Thank you for your time, patience, understanding, kindness, and concern.

    Thanks for replying, but that isn't the answer I am looking for.  Also, there is no + sign, UNLESS you do tap the overlapping boxes.
    Let me try to ask my question a little more clearly:
    When I tap the two overlapping boxes on the lower left (the option to Open New Windows), the new Window that appears will show your Bookmarked FAVORITES. But with my new iPhone 6, and the new iOS 8.0.2, when I tap the two boxes to open a New Window, my Bookmark Favorites show (as they always have and should), but below them, there is a dividing line underneath them, and it says Recently Viewed Websites, and has these websites available to tap.
    So my question is, HOW DO I TURN THESE OPTION OFF?
    *UPDATE  (10.13.14): Since I have asked this question, I no longer see these Recently Viewed Websites under my Bookmarked Favorites in my new Window tabs. So I hope that Apple fixed it, or somehow it was a mistake, or somehow I changed an Option on my iPhone 6 that stopped this for reoccurring.
    Thank you for your help bobseufert! I appreciate your concern, kindness, and the time to try to help. I am grateful.
    Have a blessed day.

  • Black (or White) Box appearing on photos sometimes when zooming in and out.

    I just recently upgraded to Adobe Photoshop CC and something really odd is happening:  On some zoom levels I have this empy black or white box appearing.  When I zoom in or out it disappears, or reappears. 
    However, when I save the file as a JPEG, or bring it into Google Nik it is OK.  It's almost like there is a software bug, or a bad memory spot in my video card.  Any suggestions? 

    Google updated the plugins recently to correct this problem:
    https://support.google.com/nikcollection/answer/4400822?hl=en&ref_topic=3001406
    Version 1.109 (December 11/2013) is the latest:
    Fixed black or white tile artifacts that might have occurred after returning to Photoshop from plug-ins
    You can find out the version you have installed by launching Photoshop:
    On Mac: Select Photoshop>About Plug-in>Analog Efex Pro… (or any other NIK Plug-in)
    On Windows: Select Help>About Plug-in>Analog Efex Pro… (or any other NIK Plug-in)

  • Just updated itunes now menu bar has dissapeared no black and white box at top left and ctr b does not bring anything up. i need file view etc please help driving me crazy

    just updated itunes now menu bar has dissapeared no black and white box at top left and ctr b does not bring anything up. i need file view etc please help driving me crazy

    Is the iTunes window in FullScreen mode?
    If so, press esc key.

  • OWB 10.2 - Pluggable Mappings Implementation: Black-Box, White-Box, ...

    Hi,
    We recently migrated from OWB 10.1 to version 10.2, and for the moment I'm investigating the new feature 'Pluggable Mappings'.
    When looking at the OWB documentation I can find 3 different data transformation logics: black-box, white-box and system-managed.
    But when going to the OWB 10.2 design client I can't find anywhere this property on the pluggable mappings?
    Can anybody help?
    Thanks a lot in advance!
    Bart

    I haven't seen that in the OWB manual but perhaps it just refers to how you can treat a pluggable mapping.
    As a pluggable mapping is in effect a reusable component it can be tested independently.
    Black box testing usually refers to testing with no knowledge of the inner workings of the component i.e. you test by passing specific inputs and ensuring you get desired outputs, what the component did in the middle is irrelevant to your test.
    White box testing means that you test every path through the component so it requires a detailed understanding of the inner workings.
    Not sure about system managed, perhaps that just means a system test where you test the whole application.
    Pluggable mappings are useful to split large or complex mappings into smaller more manageable parts or to create a reusable component that you include in several mappings but only need to build/test once.
    Si
    PS. prior to 10.2.0.3 I encountered many bugs with pluggable mappings.

  • Overlap to objects, both black, but in the overlapping region color is white

    This has bot to be possible, but for some reason my brain just ain't working.
    I've got to black objects, let's say circles, they overlap. IN the overlapped portion I want my color to be white, is that possible?

    The basic idea is based on the fact that black is white and white is black.
    So, do the following:
    1. New document
    2. On Layer 1, draw a grey filled rectangle
    3. Create a new layer above Layer 1
    4. On Layer 2, draw two white filled circles
    5. Target Layer 2 (click the circle on the right handside of the Layer's name)
    6. In the Appearance Palette, add a new black fill to Layer 2
    7. While this new fill is highlighted in the Appearance Palette, go to Effect > Pathfinder > Exclude
    8. Now, create any calligraphic brush and apply it to a white stroke which you have drawn on Layer 2, overlapping the white, no the black circles.

  • Hello!  I need Apple (!!!) headphones for Ipod Shuffle 3! (only apple earphones with remote and mic!!!) Tell me, what distinguishes the model are presented in black and white boxes? They may differ in features? Can one model is more modern than the other?

    Hello!
    I need Apple (!!!) headphones for Ipod Shuffle 3! (only apple earphones with remote and mic!!!)
    Tell me, what distinguishes the model are presented in black and white boxes? They may differ in features? Can one model is more modern than the other?
    Thanks in advance!

    Hi Fencer1986,
    I apologize, I'm a bit unclear on your request. If you have questions about headphone compatibility for your iPod shuffle 3rd Gen, you may find the following article helpful:
    iPod shuffle (3rd generation): About headphone compatibility
    http://support.apple.com/kb/ht3472
    Regards,
    - Brenden

  • I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on.

    I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on. These are 20 frame dissolves.

    FCP User Manual, page 798.
    You can condense multiple clips that are stacked above each other into a nest. The nest appears as a single clip in the Timeline. If you need to modify the individual clips inside after you have created the nest, it can be expanded again by double clicking it.

  • Black and white boxes in safari

    Does anyone get black and White boxes in safari when they are browsing web pages thanks

    That's normal - it's the "blank area"/"placeholder" that's shown while that portion of the page is loading. That 'gray and white checkerboard' is the same thing that many graphics programs (e.g. Photoshop) use to represent a transparent/blank area.

  • Black screen with white boxes?

    I restarted my macbook about an hour ago, and it started up, then all I saw was a black screen with white boxes everywhere. I managed to login, but I can't see anything. Attached is what I see on my screen.

    Hi maxh231,
    Thanks for visiting Apple Support Communities.
    If you are not seeing video on your MacBook display, try these troubleshooting steps first:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    You can find the steps above and more information here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Best,
    Jeremy

  • I don't like when I scroll over a link on a webpage and the hyperlink shows up on the bottom right in white box... it is extremely annoying. I want to know how to turn it off if possible, otherwise I'm going to have to use another browser. Thank you.

    I don't recall this feature on any other version of firefox. For some reason, I can't stop focusing on the fact that every time I scroll over something on a webpage, an annoying white box pops up in the corner of the website displaying the hyperlink, or showing the fact that the link or whatever is loading... it's unnecessary and to me it appears as clutter, especially when I'm browsing a website that has a colored backdrop because then the annoying box pops out even more. I want to turn it off somehow or get rid of firefox.

    To toggle the add-on bar on/off use Ctrl+/ or hide the add-ons bar through the View > Toolbars menus
    Th add-ons bar replaces the status bar, so if you miss the status-bar working as before see item #10 in
    You can make Firefox 4.0.1 and '''Firefox 5.0''' look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

  • Why are some graphics beside my bookmarks just a white box outlined in black

    on my drop down menus of my tool bar some graphics beside the websites are white outlined in black and others have the normal graphic beside the website.

    Bookmark favicon changed OR missing in Fx8 from dog-eared white sheet to dotted outline
    * pontification -- https://support.mozilla.com/en-US/questions/898545#answer-278203 **** (skip rest in my list)
    * https://support.mozilla.com/questions/897411#answer-276343 ***
    : picture at https://support.mozilla.com/kb/latest-firefox-issues#w_my-bookmark-or-page-icons-are-gone
    : gallery picture in above https://support.mozilla.com/media/uploads/gallery/images/2011-11-10-15-42-42-6f20e8.png
    : https://support.mozilla.com/questions/894100
    : favicon changed to dotted outline, use "CheckPlaces" to restore icons after Sync
    : https://support.mozilla.com/questions/890741 restore use of old icon (Cor-el)
    : favicon picker may lose icons see support page, sync may lose icons see support KB article above.

  • Where is the chain and the white box

    i am using cs5 and i am still learning as u will see
    when i add a new layer i dont get the little chain and the white box which prevents me from using the for example the fill in the edit menu
    what can i do
    i follow some tutorials and they have the little chain and the box automatically when they add a new layer

    Hi,
    You are asking in the wrong forum but the answer is that you the layer mask isn't automatically added when you create a layer. The authors of the tutorials are pressing the add layer mask button at the bottom of the layers palette. The CS5 Help page I have linked below shows where to locate this button.
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7866a.h tml
    Note: You can not add a layer mask to a locked background.
    Edit: A mask does appear automatically if the author is adding an adjustment layer. The adjustment layers with mask are accessed in the layers palette under the black and white icon. If you do an adjustment from the menu bar the mask does not appear. Maybe, this is where you are getting confused. Info about adjustment layers and where they can be found in CS5 are linked below.
    http://help.adobe.com/en_US/photoshop/cs/using/WS5A7BAC5F-EF4C-4fd1-94BB-6ACA59C8E73Fa.htm l
    The Photoshop forum is split by OS. Links for the Photoshop forums can be found here:
    http://forums.adobe.com/community/photoshop

Maybe you are looking for

  • Delete from wwv_flow_files after auto submit

    Hi, I have a situation in a file upload page (based on the How TO Doc), where auto submitting is done when an item (select list with submit) is used. We stored the uploaded file in a custom file and normally it works. But when the select list item is

  • BAPI Function required for Vendor clearing F-44

    Dear all, Do we have a BAPI Function for Posting entries for f-44 ( Vendor Clearing ). Regards, Gaurav Sood

  • Concat function or equivalent for CDS view?

    Trying to create a CDS view and looking to combine multiple character fields (e.g. first_name + last_name) and am wondering if this is possible? Am on CRM NW 7.4 SP5 on HANA. Using the arithmetic function gives me the following. Data type CHAR is cur

  • Slow support site and Windows 8 drivers

    Gents, What's going on ? Your support.lenovo.com site is slow like a snail. It's impossible to download fresh drivers. Can anyone explain, where can I find ALL drivers for T530 (2392-3RG) ? I need drivers for:    Ricoh SDcard reader    Intel chipset

  • Code inspector variant

    hi i want to capture all the hard coded values in the program by running code inspector how can i set that option while creating the variant for that,please suggest,when i had looked at the options i did not find please help in this regard. Babita